[SCSI] qla2xxx: Fix issue with not displaying node name after system reboot.
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 149a1b5..66f6597 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -26,7 +26,7 @@
* | | | 0x302d,0x3033 |
* | | | 0x3036,0x3038 |
* | | | 0x303a |
- * | DPC Thread | 0x4022 | 0x4002,0x4013 |
+ * | DPC Thread | 0x4023 | 0x4002,0x4013 |
* | Async Events | 0x5087 | 0x502b-0x502f |
* | | | 0x5047,0x5052 |
* | | | 0x5084,0x5075 |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 0fb01e1..ac62bca 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3370,6 +3370,7 @@
#define FX00_RESET_RECOVERY 23
#define FX00_TARGET_SCAN 24
#define FX00_CRITEMP_RECOVERY 25
+#define FX00_HOST_INFO_RESEND 26
uint32_t device_flags;
#define SWITCH_FOUND BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 7c17b92..034f86d 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -1610,6 +1610,22 @@
ha->mr.fw_critemp_timer_tick--;
}
}
+ if (ha->mr.host_info_resend) {
+ /*
+ * Incomplete host info might be sent to firmware
+ * durinng system boot - info should be resend
+ */
+ if (ha->mr.hinfo_resend_timer_tick == 0) {
+ ha->mr.host_info_resend = false;
+ set_bit(FX00_HOST_INFO_RESEND, &vha->dpc_flags);
+ ha->mr.hinfo_resend_timer_tick =
+ QLAFX00_HINFO_RESEND_INTERVAL;
+ qla2xxx_wake_dpc(vha);
+ } else {
+ ha->mr.hinfo_resend_timer_tick--;
+ }
+ }
+
}
/*
@@ -1888,6 +1904,8 @@
p_sysid->sysname, SYSNAME_LENGTH);
strncpy(phost_info->nodename,
p_sysid->nodename, NODENAME_LENGTH);
+ if (!strcmp(phost_info->nodename, "(none)"))
+ ha->mr.host_info_resend = true;
strncpy(phost_info->release,
p_sysid->release, RELEASE_LENGTH);
strncpy(phost_info->version,
diff --git a/drivers/scsi/qla2xxx/qla_mr.h b/drivers/scsi/qla2xxx/qla_mr.h
index 79a93c5..a5ddea6 100644
--- a/drivers/scsi/qla2xxx/qla_mr.h
+++ b/drivers/scsi/qla2xxx/qla_mr.h
@@ -511,6 +511,8 @@
uint32_t old_aenmbx0_state;
uint32_t critical_temperature;
bool extended_io_enabled;
+ bool host_info_resend;
+ uint8_t hinfo_resend_timer_tick;
};
#define QLAFX00_EXTENDED_IO_EN_MASK 0x20
@@ -537,6 +539,7 @@
#define QLAFX00_RESET_INTERVAL 120 /* number of seconds */
#define QLAFX00_MAX_RESET_INTERVAL 600 /* number of seconds */
#define QLAFX00_CRITEMP_INTERVAL 60 /* number of seconds */
+#define QLAFX00_HINFO_RESEND_INTERVAL 60 /* number of seconds */
#define QLAFX00_CRITEMP_THRSHLD 80 /* Celsius degrees */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 690b626..4ab9a27 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2495,6 +2495,8 @@
ha->mr.fw_reset_timer_tick = QLAFX00_RESET_INTERVAL;
ha->mr.fw_critemp_timer_tick = QLAFX00_CRITEMP_INTERVAL;
ha->mr.fw_hbt_en = 1;
+ ha->mr.host_info_resend = false;
+ ha->mr.hinfo_resend_timer_tick = QLAFX00_HINFO_RESEND_INTERVAL;
}
ql_dbg_pci(ql_dbg_init, pdev, 0x001e,
@@ -4867,6 +4869,14 @@
ql_dbg(ql_dbg_dpc, base_vha, 0x401f,
"ISPFx00 Target Scan End\n");
}
+ if (test_and_clear_bit(FX00_HOST_INFO_RESEND,
+ &base_vha->dpc_flags)) {
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4023,
+ "ISPFx00 Host Info resend scheduled\n");
+ qlafx00_fx_disc(base_vha,
+ &base_vha->hw->mr.fcport,
+ FXDISC_REG_HOST_INFO);
+ }
}
if (test_and_clear_bit(ISP_ABORT_NEEDED,