ALSA: virtuoso: fix front panel routing for D1/DX/ST(X)
The "Front Panel" switch on the Xonar D1/DX actually switches only the
output direction, so mark it appropriately.
The front panel microphone is controlled by the FMIC2MIC bit of the
CM9780. It was unconditionally enabled on the D1/DX and never set on
the ST(X); add a control for it. Selecting the front panel microphone
as source does not actually disable the microphone jack, but this is
bug-compatible with the Windows driver, and users rely on it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/oxygen/xonar_cs43xx.c b/sound/pci/oxygen/xonar_cs43xx.c
index ae4e5b5..501fe45 100644
--- a/sound/pci/oxygen/xonar_cs43xx.c
+++ b/sound/pci/oxygen/xonar_cs43xx.c
@@ -28,7 +28,7 @@
* GPI 0 <- external power present (DX only)
*
* GPIO 0 -> enable output to speakers
- * GPIO 1 -> enable front panel I/O
+ * GPIO 1 -> route output to front panel
* GPIO 2 -> M0 of CS5361
* GPIO 3 -> M1 of CS5361
* GPIO 8 -> route input jack to line-in (0) or mic-in (1)
@@ -176,8 +176,6 @@
oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA,
GPIO_D1_FRONT_PANEL | GPIO_D1_INPUT_ROUTE);
- oxygen_ac97_set_bits(chip, 0, CM9780_JACK, CM9780_FMIC2MIC);
-
xonar_init_cs53x1(chip);
xonar_enable_output(chip);
@@ -287,7 +285,7 @@
static const struct snd_kcontrol_new front_panel_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Front Panel Switch",
+ .name = "Front Panel Playback Switch",
.info = snd_ctl_boolean_mono_info,
.get = xonar_gpio_bit_switch_get,
.put = xonar_gpio_bit_switch_put,
@@ -402,7 +400,8 @@
.model_data_size = sizeof(struct xonar_cs43xx),
.device_config = PLAYBACK_0_TO_I2S |
PLAYBACK_1_TO_SPDIF |
- CAPTURE_0_FROM_I2S_2,
+ CAPTURE_0_FROM_I2S_2 |
+ AC97_FMIC_SWITCH,
.dac_channels = 8,
.dac_volume_min = 127 - 60,
.dac_volume_max = 127,