[ARM] 3417/1: add support for logicpd pxa270 card engine
Patch from Lennert Buytenhek
Add support for the LogicPD PXA270 Card Engine.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
new file mode 100644
index 0000000..ec0f43a
--- /dev/null
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -0,0 +1,393 @@
+/*
+ * linux/arch/arm/mach-pxa/lpd270.c
+ *
+ * Support for the LogicPD PXA270 Card Engine.
+ * Derived from the mainstone code, which carries these notices:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 05, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/lpd270.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+
+static unsigned int lpd270_irq_enabled;
+
+static void lpd270_mask_irq(unsigned int irq)
+{
+ int lpd270_irq = irq - LPD270_IRQ(0);
+
+ __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
+
+ lpd270_irq_enabled &= ~(1 << lpd270_irq);
+ __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static void lpd270_unmask_irq(unsigned int irq)
+{
+ int lpd270_irq = irq - LPD270_IRQ(0);
+
+ lpd270_irq_enabled |= 1 << lpd270_irq;
+ __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct irqchip lpd270_irq_chip = {
+ .ack = lpd270_mask_irq,
+ .mask = lpd270_mask_irq,
+ .unmask = lpd270_unmask_irq,
+};
+
+static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc,
+ struct pt_regs *regs)
+{
+ unsigned long pending;
+
+ pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
+ do {
+ GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
+ if (likely(pending)) {
+ irq = LPD270_IRQ(0) + __ffs(pending);
+ desc = irq_desc + irq;
+ desc_handle_irq(irq, desc, regs);
+
+ pending = __raw_readw(LPD270_INT_STATUS) &
+ lpd270_irq_enabled;
+ }
+ } while (pending);
+}
+
+static void __init lpd270_init_irq(void)
+{
+ int irq;
+
+ pxa_init_irq();
+
+ __raw_writew(0, LPD270_INT_MASK);
+ __raw_writew(0, LPD270_INT_STATUS);
+
+ /* setup extra LogicPD PXA270 irqs */
+ for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
+ set_irq_chip(irq, &lpd270_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
+ set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+}
+
+
+#ifdef CONFIG_PM
+static int lpd270_irq_resume(struct sys_device *dev)
+{
+ __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+ return 0;
+}
+
+static struct sysdev_class lpd270_irq_sysclass = {
+ set_kset_name("cpld_irq"),
+ .resume = lpd270_irq_resume,
+};
+
+static struct sys_device lpd270_irq_device = {
+ .cls = &lpd270_irq_sysclass,
+};
+
+static int __init lpd270_irq_device_init(void)
+{
+ int ret = sysdev_class_register(&lpd270_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&lpd270_irq_device);
+ return ret;
+}
+
+device_initcall(lpd270_irq_device_init);
+#endif
+
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = LPD270_ETH_PHYS,
+ .end = (LPD270_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LPD270_ETHERNET_IRQ,
+ .end = LPD270_ETHERNET_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device lpd270_audio_device = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+};
+
+static struct resource lpd270_flash_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition lpd270_flash0_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ },
+};
+
+static struct flash_platform_data lpd270_flash_data[2] = {
+ {
+ .name = "processor-flash",
+ .map_name = "cfi_probe",
+ .parts = lpd270_flash0_partitions,
+ .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
+ }, {
+ .name = "mainboard-flash",
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device lpd270_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lpd270_flash_data[0],
+ },
+ .resource = &lpd270_flash_resources[0],
+ .num_resources = 1,
+ }, {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &lpd270_flash_data[1],
+ },
+ .resource = &lpd270_flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+static void lpd270_backlight_power(int on)
+{
+ if (on) {
+ pxa_gpio_mode(GPIO16_PWM0_MD);
+ pxa_set_cken(CKEN0_PWM0, 1);
+ PWM_CTRL0 = 0;
+ PWM_PWDUTY0 = 0x3ff;
+ PWM_PERVAL0 = 0x3ff;
+ } else {
+ PWM_CTRL0 = 0;
+ PWM_PWDUTY0 = 0x0;
+ PWM_PERVAL0 = 0x3FF;
+ pxa_set_cken(CKEN0_PWM0, 0);
+ }
+}
+
+/* 5.7" TFT QVGA (LoLo display number 1) */
+static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
+ .pixclock = 100000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 64,
+ .left_margin = 0x27,
+ .right_margin = 0x09,
+ .vsync_len = 0x04,
+ .upper_margin = 0x08,
+ .lower_margin = 0x14,
+ .sync = 0,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x04400007,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 6.4" TFT VGA (LoLo display number 5) */
+static struct pxafb_mach_info sharp_lq64d343 __initdata = {
+ .pixclock = 20000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 49,
+ .left_margin = 0x89,
+ .right_margin = 0x19,
+ .vsync_len = 18,
+ .upper_margin = 0x22,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x04400001,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 3.5" TFT QVGA (LoLo display number 8) */
+static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
+ .pixclock = 100000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 0x34,
+ .left_margin = 0x09,
+ .right_margin = 0x09,
+ .vsync_len = 0x08,
+ .upper_margin = 0x05,
+ .lower_margin = 0x14,
+ .sync = 0,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x04400007,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &smc91x_device,
+ &lpd270_audio_device,
+ &lpd270_flash_device[0],
+ &lpd270_flash_device[1],
+};
+
+static int lpd270_ohci_init(struct device *dev)
+{
+ /* setup Port1 GPIO pin. */
+ pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
+ pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
+
+ /* Set the Power Control Polarity Low and Power Sense
+ Polarity Low to active low. */
+ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ return 0;
+}
+
+static struct pxaohci_platform_data lpd270_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = lpd270_ohci_init,
+};
+
+static void __init lpd270_init(void)
+{
+ lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ lpd270_flash_data[1].width = 4;
+
+ /*
+ * System bus arbiter setting:
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ /*
+ * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
+ */
+ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ // set_pxa_fb_info(&sharp_lq057q3dc02);
+ set_pxa_fb_info(&sharp_lq64d343);
+ // set_pxa_fb_info(&sharp_lq035q7db02_20);
+
+ pxa_set_ohci_info(&lpd270_ohci_platform_data);
+}
+
+
+static struct map_desc lpd270_io_desc[] __initdata = {
+ {
+ .virtual = LPD270_CPLD_VIRT,
+ .pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
+ .length = LPD270_CPLD_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init lpd270_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
+
+ /* initialize sleep mode regs (wake-up sources, etc) */
+ PGSR0 = 0x00008800;
+ PGSR1 = 0x00000002;
+ PGSR2 = 0x0001FC00;
+ PGSR3 = 0x00001F81;
+ PWER = 0xC0000002;
+ PRER = 0x00000002;
+ PFER = 0x00000002;
+
+ /* for use I SRAM as framebuffer. */
+ PSLR |= 0x00000F04;
+ PCFR = 0x00000066;
+}
+
+MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
+ /* Maintainer: Peter Barada */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = lpd270_map_io,
+ .init_irq = lpd270_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = lpd270_init,
+MACHINE_END