mmc: omap_hsmmc: adapt hsmmc to use pbias regulator

In DT case, PBAIS registers are programmed via regulator,
use regulator APIs to control PBIAS.

Signed-off-by: Balaji T K <balajitk@ti.com>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Ball <chris@printf.net>
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6f4b6b4..f46190c 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -126,6 +126,10 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
+#define VDD_1V8			1800000		/* 180000 uV */
+#define VDD_3V0			3000000		/* 300000 uV */
+#define VDD_165_195		(ffs(MMC_VDD_165_195) - 1)
+
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -164,6 +168,8 @@
 	 */
 	struct	regulator	*vcc;
 	struct	regulator	*vcc_aux;
+	struct	regulator	*pbias;
+	bool			pbias_enabled;
 	int			pbias_disable;
 	void	__iomem		*base;
 	resource_size_t		mapbase;
@@ -277,6 +283,15 @@
 	if (mmc_slot(host).before_set_reg)
 		mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
 
+	if (host->pbias) {
+		if (host->pbias_enabled == 1) {
+			ret = regulator_disable(host->pbias);
+			if (!ret)
+				host->pbias_enabled = 0;
+		}
+		regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+	}
+
 	/*
 	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
@@ -311,9 +326,27 @@
 		}
 	}
 
+	if (host->pbias) {
+		if (vdd <= VDD_165_195)
+			ret = regulator_set_voltage(host->pbias, VDD_1V8,
+								VDD_1V8);
+		else
+			ret = regulator_set_voltage(host->pbias, VDD_3V0,
+								VDD_3V0);
+		if (ret < 0)
+			goto error_set_power;
+
+		if (host->pbias_enabled == 0) {
+			ret = regulator_enable(host->pbias);
+			if (!ret)
+				host->pbias_enabled = 1;
+		}
+	}
+
 	if (mmc_slot(host).after_set_reg)
 		mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
 
+error_set_power:
 	return ret;
 }
 
@@ -347,6 +380,9 @@
 	reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
 	host->vcc_aux = IS_ERR(reg) ? NULL : reg;
 
+	reg = devm_regulator_get_optional(host->dev, "pbias");
+	host->pbias = IS_ERR(reg) ? NULL : reg;
+
 	/* For eMMC do not power off when not in sleep state */
 	if (mmc_slot(host).no_regulator_off_init)
 		return 0;
@@ -1831,6 +1867,7 @@
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
 	host->next_data.cookie = 1;
+	host->pbias_enabled = 0;
 
 	platform_set_drvdata(pdev, host);