USB: add Cypress c67x00 OTG controller HCD driver
This patch adds HCD support for the Cypress c67x00 family of devices.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index e921991..f3430b3 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -297,6 +297,81 @@
}
/* -------------------------------------------------------------------------- */
+/* Host specific functions */
+
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value)
+{
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_write_word(dev, HUSB_pEOT, value);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+}
+
+static inline void c67x00_ll_husb_sie_init(struct c67x00_sie *sie)
+{
+ struct c67x00_device *dev = sie->dev;
+ struct c67x00_lcp_int_data data;
+ int rc;
+
+ rc = c67x00_comm_exec_int(dev, HUSB_SIE_INIT_INT(sie->sie_num), &data);
+ BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port)
+{
+ struct c67x00_device *dev = sie->dev;
+ struct c67x00_lcp_int_data data;
+ int rc;
+
+ data.regs[0] = 50; /* Reset USB port for 50ms */
+ data.regs[1] = port | (sie->sie_num << 1);
+ rc = c67x00_comm_exec_int(dev, HUSB_RESET_INT, &data);
+ BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr)
+{
+ hpi_write_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num), addr);
+}
+
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num));
+}
+
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, HOST_FRAME_REG(sie->sie_num));
+}
+
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie)
+{
+ /* Set port into host mode */
+ hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), HOST_MODE);
+ c67x00_ll_husb_sie_init(sie);
+ /* Clear interrupts */
+ c67x00_ll_usb_clear_status(sie, HOST_STAT_MASK);
+ /* Check */
+ if (!(hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num)) & HOST_MODE))
+ dev_warn(sie_dev(sie),
+ "SIE %d not set to host mode\n", sie->sie_num);
+}
+
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port)
+{
+ /* Clear connect change */
+ c67x00_ll_usb_clear_status(sie, PORT_CONNECT_CHANGE(port));
+
+ /* Enable interrupts */
+ hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_CPU_EN(sie->sie_num));
+ hpi_set_bits(sie->dev, HOST_IRQ_EN_REG(sie->sie_num),
+ SOF_EOP_IRQ_EN | DONE_IRQ_EN);
+
+ /* Enable pull down transistors */
+ hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), PORT_RES_EN(port));
+}
+
+/* -------------------------------------------------------------------------- */
void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status)
{