diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
new file mode 100644
index 0000000..0b27177
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -0,0 +1,13 @@
+Allwinner sunXi Watchdog timer
+
+Required properties:
+
+- compatible : should be "allwinner,sunxi-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@01c20c90 {
+	compatible = "allwinner,sunxi-wdt";
+	reg = <0x01c20c90 0x10>;
+};
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4c336c3..6783273 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -345,6 +345,13 @@
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA based platforms.
 
+	config DEBUG_SUNXI_UART0
+		bool "Kernel low-level debugging messages via sunXi UART0"
+		depends on ARCH_SUNXI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Allwinner A1X based platforms on the UART0.
+
 	config DEBUG_SUNXI_UART1
 		bool "Kernel low-level debugging messages via sunXi UART1"
 		depends on ARCH_SUNXI
@@ -431,7 +438,7 @@
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
-	default "debug/sunxi.S" if DEBUG_SUNXI_UART1
+	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
 	default "mach/debug-macro.S"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 22e4ac9..8585bc0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -86,7 +86,8 @@
 	spear310-evb.dtb \
 	spear320-evb.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \
+	sun5i-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-cubieboard.dts
new file mode 100644
index 0000000..f4ca126
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-cubieboard.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i.dtsi"
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,cubieboard", "allwinner,sun4i";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc {
+		uart0: uart@01c28000 {
+			status = "okay";
+		};
+
+		uart1: uart@01c28400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts
index 3b1cce3..d6ff889 100644
--- a/arch/arm/boot/dts/sun5i-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-olinuxino.dts
@@ -18,8 +18,12 @@
 	model = "Olimex A13-Olinuxino";
 	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
 
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
 	soc {
-		duart: uart@01c28400 {
+		uart1: uart@01c28400 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 4bedf3e..59a2d26 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -11,64 +11,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+/include/ "sunxi.dtsi"
 
 / {
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
 	memory {
 		reg = <0x40000000 0x20000000>;
 	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
-		ranges;
-
-		timer@01c20c00 {
-			compatible = "allwinner,sunxi-timer";
-			reg = <0x01c20c00 0x400>;
-			interrupts = <22>;
-			clocks = <&osc>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sunxi-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		uart1: uart@01c28400 {
-			compatible = "ns8250";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			clock-frequency = <24000000>;
-			status = "disabled";
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
new file mode 100644
index 0000000..8bbc2bf
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x01c20000 0x300000>;
+		ranges;
+
+		timer@01c20c00 {
+			compatible = "allwinner,sunxi-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sunxi-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sunxi-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: uart@01c28000 {
+			compatible = "ns8250";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			clock-frequency = <24000000>;
+			status = "disabled";
+		};
+
+		uart1: uart@01c28400 {
+			compatible = "ns8250";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			clock-frequency = <24000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S
index 3bf61ca..04eb56d 100644
--- a/arch/arm/include/debug/sunxi.S
+++ b/arch/arm/include/debug/sunxi.S
@@ -10,7 +10,10 @@
  * published by the Free Software Foundation.
 */
 
-#ifdef CONFIG_DEBUG_SUNXI_UART1
+#if defined(CONFIG_DEBUG_SUNXI_UART0)
+#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000
+#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000
+#elif defined(CONFIG_DEBUG_SUNXI_UART1)
 #define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400
 #define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400
 #endif
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 8f42df8..dc634ae 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
@@ -26,6 +27,36 @@
 
 #include "sunxi.h"
 
+#define WATCHDOG_CTRL_REG	0x00
+#define WATCHDOG_MODE_REG	0x04
+
+static void __iomem *wdt_base;
+
+static void sunxi_setup_restart(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+						"allwinner,sunxi-wdt");
+	if (WARN(!np, "unable to setup watchdog restart"))
+		return;
+
+	wdt_base = of_iomap(np, 0);
+	WARN(!wdt_base, "failed to map watchdog base address");
+}
+
+static void sunxi_restart(char mode, const char *cmd)
+{
+	if (!wdt_base)
+		return;
+
+	/* Enable timer and set reset bit in the watchdog */
+	writel(3, wdt_base + WATCHDOG_MODE_REG);
+	writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG);
+	while(1) {
+		mdelay(5);
+		writel(3, wdt_base + WATCHDOG_MODE_REG);
+	}
+}
+
 static struct map_desc sunxi_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long) SUNXI_REGS_VIRT_BASE,
@@ -42,10 +73,13 @@
 
 static void __init sunxi_dt_init(void)
 {
+	sunxi_setup_restart();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const sunxi_board_dt_compat[] = {
+	"allwinner,sun4i",
 	"allwinner,sun5i",
 	NULL,
 };
@@ -55,6 +89,7 @@
 	.map_io		= sunxi_map_io,
 	.init_irq	= sunxi_init_irq,
 	.handle_irq	= sunxi_handle_irq,
+	.restart	= sunxi_restart,
 	.timer		= &sunxi_timer,
 	.dt_compat	= sunxi_board_dt_compat,
 MACHINE_END