| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| gpio5 = &gpio6; |
| gpio6 = &gpio7; |
| }; |
| |
| tzic: tz-interrupt-controller@0fffc000 { |
| compatible = "fsl,imx53-tzic", "fsl,tzic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x0fffc000 0x4000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fsl,imx-ckil", "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| ckih1 { |
| compatible = "fsl,imx-ckih1", "fixed-clock"; |
| clock-frequency = <22579200>; |
| }; |
| |
| ckih2 { |
| compatible = "fsl,imx-ckih2", "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&tzic>; |
| ranges; |
| |
| ipu: ipu@18000000 { |
| #crtc-cells = <1>; |
| compatible = "fsl,imx53-ipu"; |
| reg = <0x18000000 0x080000000>; |
| interrupts = <11 10>; |
| }; |
| |
| aips@50000000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x10000000>; |
| ranges; |
| |
| spba@50000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x40000>; |
| ranges; |
| |
| esdhc@50004000 { /* ESDHC1 */ |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50004000 0x4000>; |
| interrupts = <1>; |
| status = "disabled"; |
| }; |
| |
| esdhc@50008000 { /* ESDHC2 */ |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50008000 0x4000>; |
| interrupts = <2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@5000c000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x5000c000 0x4000>; |
| interrupts = <33>; |
| status = "disabled"; |
| }; |
| |
| ecspi@50010000 { /* ECSPI1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x50010000 0x4000>; |
| interrupts = <36>; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@50014000 { |
| compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; |
| reg = <0x50014000 0x4000>; |
| interrupts = <30>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| esdhc@50020000 { /* ESDHC3 */ |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50020000 0x4000>; |
| interrupts = <3>; |
| status = "disabled"; |
| }; |
| |
| esdhc@50024000 { /* ESDHC4 */ |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50024000 0x4000>; |
| interrupts = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb@53f80000 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80000 0x0200>; |
| interrupts = <18>; |
| status = "disabled"; |
| }; |
| |
| usb@53f80200 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80200 0x0200>; |
| interrupts = <14>; |
| status = "disabled"; |
| }; |
| |
| usb@53f80400 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80400 0x0200>; |
| interrupts = <16>; |
| status = "disabled"; |
| }; |
| |
| usb@53f80600 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80600 0x0200>; |
| interrupts = <17>; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@53f84000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f84000 0x4000>; |
| interrupts = <50 51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@53f88000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f88000 0x4000>; |
| interrupts = <52 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@53f8c000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f8c000 0x4000>; |
| interrupts = <54 55>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@53f90000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f90000 0x4000>; |
| interrupts = <56 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wdog@53f98000 { /* WDOG1 */ |
| compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; |
| reg = <0x53f98000 0x4000>; |
| interrupts = <58>; |
| }; |
| |
| wdog@53f9c000 { /* WDOG2 */ |
| compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; |
| reg = <0x53f9c000 0x4000>; |
| interrupts = <59>; |
| status = "disabled"; |
| }; |
| |
| iomuxc@53fa8000 { |
| compatible = "fsl,imx53-iomuxc"; |
| reg = <0x53fa8000 0x4000>; |
| |
| audmux { |
| pinctrl_audmux_1: audmuxgrp-1 { |
| fsl,pins = < |
| 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ |
| 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ |
| 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ |
| 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ |
| >; |
| }; |
| }; |
| |
| fec { |
| pinctrl_fec_1: fecgrp-1 { |
| fsl,pins = < |
| 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */ |
| 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */ |
| 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */ |
| 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */ |
| 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */ |
| 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */ |
| 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */ |
| 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */ |
| 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */ |
| 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */ |
| >; |
| }; |
| }; |
| |
| ecspi1 { |
| pinctrl_ecspi1_1: ecspi1grp-1 { |
| fsl,pins = < |
| 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */ |
| 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */ |
| 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */ |
| >; |
| }; |
| }; |
| |
| esdhc1 { |
| pinctrl_esdhc1_1: esdhc1grp-1 { |
| fsl,pins = < |
| 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ |
| 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ |
| 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ |
| 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ |
| 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ |
| 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ |
| >; |
| }; |
| |
| pinctrl_esdhc1_2: esdhc1grp-2 { |
| fsl,pins = < |
| 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ |
| 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ |
| 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ |
| 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ |
| 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */ |
| 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */ |
| 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */ |
| 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */ |
| 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ |
| 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ |
| >; |
| }; |
| }; |
| |
| esdhc2 { |
| pinctrl_esdhc2_1: esdhc2grp-1 { |
| fsl,pins = < |
| 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */ |
| 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */ |
| 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */ |
| 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */ |
| 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */ |
| 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */ |
| >; |
| }; |
| }; |
| |
| esdhc3 { |
| pinctrl_esdhc3_1: esdhc3grp-1 { |
| fsl,pins = < |
| 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */ |
| 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */ |
| 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */ |
| 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */ |
| 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */ |
| 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */ |
| 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */ |
| 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */ |
| 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */ |
| 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */ |
| >; |
| }; |
| }; |
| |
| i2c1 { |
| pinctrl_i2c1_1: i2c1grp-1 { |
| fsl,pins = < |
| 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */ |
| 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */ |
| >; |
| }; |
| }; |
| |
| i2c2 { |
| pinctrl_i2c2_1: i2c2grp-1 { |
| fsl,pins = < |
| 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */ |
| 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */ |
| >; |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1_1: uart1grp-1 { |
| fsl,pins = < |
| 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */ |
| 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ |
| >; |
| }; |
| |
| pinctrl_uart1_2: uart1grp-2 { |
| fsl,pins = < |
| 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */ |
| 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */ |
| >; |
| }; |
| }; |
| |
| uart2 { |
| pinctrl_uart2_1: uart2grp-1 { |
| fsl,pins = < |
| 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */ |
| 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */ |
| >; |
| }; |
| }; |
| |
| uart3 { |
| pinctrl_uart3_1: uart3grp-1 { |
| fsl,pins = < |
| 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ |
| 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ |
| 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */ |
| 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ |
| >; |
| }; |
| }; |
| }; |
| |
| uart1: serial@53fbc000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x53fbc000 0x4000>; |
| interrupts = <31>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@53fc0000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x53fc0000 0x4000>; |
| interrupts = <32>; |
| status = "disabled"; |
| }; |
| |
| can1: can@53fc8000 { |
| compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fc8000 0x4000>; |
| interrupts = <82>; |
| status = "disabled"; |
| }; |
| |
| can2: can@53fcc000 { |
| compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fcc000 0x4000>; |
| interrupts = <83>; |
| status = "disabled"; |
| }; |
| |
| gpio5: gpio@53fdc000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fdc000 0x4000>; |
| interrupts = <103 104>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio6: gpio@53fe0000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fe0000 0x4000>; |
| interrupts = <105 106>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio7: gpio@53fe4000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fe4000 0x4000>; |
| interrupts = <107 108>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| i2c@53fec000 { /* I2C3 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| reg = <0x53fec000 0x4000>; |
| interrupts = <64>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@53ff0000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x53ff0000 0x4000>; |
| interrupts = <13>; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips@60000000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x60000000 0x10000000>; |
| ranges; |
| |
| uart5: serial@63f90000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x63f90000 0x4000>; |
| interrupts = <86>; |
| status = "disabled"; |
| }; |
| |
| ecspi@63fac000 { /* ECSPI2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x63fac000 0x4000>; |
| interrupts = <37>; |
| status = "disabled"; |
| }; |
| |
| sdma@63fb0000 { |
| compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; |
| reg = <0x63fb0000 0x4000>; |
| interrupts = <6>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; |
| }; |
| |
| cspi@63fc0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; |
| reg = <0x63fc0000 0x4000>; |
| interrupts = <38>; |
| status = "disabled"; |
| }; |
| |
| i2c@63fc4000 { /* I2C2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| reg = <0x63fc4000 0x4000>; |
| interrupts = <63>; |
| status = "disabled"; |
| }; |
| |
| i2c@63fc8000 { /* I2C1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| reg = <0x63fc8000 0x4000>; |
| interrupts = <62>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@63fcc000 { |
| compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; |
| reg = <0x63fcc000 0x4000>; |
| interrupts = <29>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| audmux@63fd0000 { |
| compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; |
| reg = <0x63fd0000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| nand@63fdb000 { |
| compatible = "fsl,imx53-nand"; |
| reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@63fe8000 { |
| compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; |
| reg = <0x63fe8000 0x4000>; |
| interrupts = <96>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| ethernet@63fec000 { |
| compatible = "fsl,imx53-fec", "fsl,imx25-fec"; |
| reg = <0x63fec000 0x4000>; |
| interrupts = <87>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |