| /* |
| * arch/arm/mach-clps711x/include/mach/hardware.h |
| * |
| * This file contains the hardware definitions of the Prospector P720T. |
| * |
| * Copyright (C) 2000 Deep Blue Solutions Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #ifndef __MACH_HARDWARE_H |
| #define __MACH_HARDWARE_H |
| |
| #include <mach/clps711x.h> |
| |
| #define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ |
| (((x) >> 2) & 0x3c000000))) |
| |
| #define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) |
| |
| #ifndef __ASSEMBLY__ |
| #define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) |
| #define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off)) |
| #define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off)) |
| #define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off)) |
| #define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off)) |
| #define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) |
| #endif |
| |
| /* |
| * The physical addresses that the external chip select signals map to is |
| * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212 |
| * processors. CONFIG_EP72XX_BOOT_ROM is only available if these |
| * processors are in use. |
| */ |
| #ifndef CONFIG_EP72XX_ROM_BOOT |
| #define CS0_PHYS_BASE (0x00000000) |
| #define CS1_PHYS_BASE (0x10000000) |
| #define CS2_PHYS_BASE (0x20000000) |
| #define CS3_PHYS_BASE (0x30000000) |
| #define CS4_PHYS_BASE (0x40000000) |
| #define CS5_PHYS_BASE (0x50000000) |
| #define CS6_PHYS_BASE (0x60000000) |
| #define CS7_PHYS_BASE (0x70000000) |
| #else |
| #define CS0_PHYS_BASE (0x70000000) |
| #define CS1_PHYS_BASE (0x60000000) |
| #define CS2_PHYS_BASE (0x50000000) |
| #define CS3_PHYS_BASE (0x40000000) |
| #define CS4_PHYS_BASE (0x30000000) |
| #define CS5_PHYS_BASE (0x20000000) |
| #define CS6_PHYS_BASE (0x10000000) |
| #define CS7_PHYS_BASE (0x00000000) |
| #endif |
| |
| #if defined (CONFIG_ARCH_CDB89712) |
| |
| #define ETHER_PHYS_BASE CS2_PHYS_BASE |
| #define ETHER_SIZE 0x1000 |
| |
| #endif |
| |
| |
| #if defined (CONFIG_ARCH_EDB7211) |
| |
| /* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ |
| #define EP7211_PHYS_EXTKBD CS3_PHYS_BASE |
| |
| /* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ |
| #define EP7211_PHYS_CS8900A CS2_PHYS_BASE |
| |
| /* The two flash banks are wired to chip selects 0 and 1 */ |
| #define EP7211_PHYS_FLASH1 CS0_PHYS_BASE |
| #define EP7211_PHYS_FLASH2 CS1_PHYS_BASE |
| |
| #endif /* CONFIG_ARCH_EDB7211 */ |
| |
| /* |
| * Relevant bits in port D, which controls power to the various parts of |
| * the LCD on the EDB7211. |
| */ |
| #define EDB_PD1_LCD_DC_DC_EN (1<<1) |
| #define EDB_PD2_LCDEN (1<<2) |
| #define EDB_PD3_LCDBL (1<<3) |
| |
| #endif |