[ALSA] sparc dbri: SMP fixes
The dbri driver hangs when used in kernel compiled with SMP
support due to inproper locking. The patch fixes it.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 82d5e80..e4935fc 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -635,10 +635,16 @@
static void dbri_cmdwait(struct snd_dbri *dbri)
{
int maxloops = MAXLOOPS;
+ unsigned long flags;
/* Delay if previous commands are still being processed */
- while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P))
+ spin_lock_irqsave(&dbri->lock, flags);
+ while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P)) {
+ spin_unlock_irqrestore(&dbri->lock, flags);
msleep_interruptible(1);
+ spin_lock_irqsave(&dbri->lock, flags);
+ }
+ spin_unlock_irqrestore(&dbri->lock, flags);
if (maxloops == 0) {
printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
@@ -671,11 +677,12 @@
* the last WAIT cmd and force DBRI to reread the cmd.
* The JUMP cmd points to the new cmd string.
* It also releases the cmdlock spinlock.
+ *
+ * Lock must not be held before calling this.
*/
static void dbri_cmdsend(struct snd_dbri * dbri, s32 * cmd,int len)
{
s32 tmp, addr;
- unsigned long flags;
static int wait_id = 0;
wait_id++;
@@ -706,12 +713,10 @@
}
#endif
- spin_lock_irqsave(&dbri->lock, flags);
/* Reread the last command */
tmp = sbus_readl(dbri->regs + REG0);
tmp |= D_P;
sbus_writel(tmp, dbri->regs + REG0);
- spin_unlock_irqrestore(&dbri->lock, flags);
dbri->cmdptr = cmd;
spin_unlock(&dbri->cmdlock);
@@ -777,9 +782,9 @@
dma_addr = dbri->dma_dvma + dbri_dma_off(cmd, 0);
sbus_writel(dma_addr, dbri->regs + REG8);
spin_unlock(&dbri->cmdlock);
- dbri_cmdwait(dbri);
spin_unlock_irqrestore(&dbri->lock, flags);
+ dbri_cmdwait(dbri);
}
/*
@@ -840,6 +845,9 @@
dbri->pipes[pipe].first_desc = -1;
}
+/*
+ * Lock must be held before calling this.
+ */
static void setup_pipe(struct snd_dbri * dbri, int pipe, int sdp)
{
if (pipe < 0 || pipe > DBRI_MAX_PIPE) {
@@ -866,6 +874,9 @@
reset_pipe(dbri, pipe);
}
+/*
+ * Lock must be held before calling this.
+ */
static void link_time_slot(struct snd_dbri * dbri, int pipe,
int prevpipe, int nextpipe,
int length, int cycle)
@@ -920,6 +931,10 @@
dbri_cmdsend(dbri, cmd, 4);
}
+#if 0
+/*
+ * Lock must be held before calling this.
+ */
static void unlink_time_slot(struct snd_dbri * dbri, int pipe,
enum in_or_out direction, int prevpipe,
int nextpipe)
@@ -952,6 +967,7 @@
dbri_cmdsend(dbri, cmd, 4);
}
+#endif
/* xmit_fixed() / recv_fixed()
*
@@ -965,11 +981,14 @@
* the actual time slot is. The interrupt handler takes care of bit
* ordering and alignment. An 8-bit time slot will always end up
* in the low-order 8 bits, filled either MSB-first or LSB-first,
- * depending on the settings passed to setup_pipe()
+ * depending on the settings passed to setup_pipe().
+ *
+ * Lock must not be held before calling it.
*/
static void xmit_fixed(struct snd_dbri * dbri, int pipe, unsigned int data)
{
s32 *cmd;
+ unsigned long flags;
if (pipe < 16 || pipe > DBRI_MAX_PIPE) {
printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n");
@@ -1002,8 +1021,11 @@
*(cmd++) = data;
*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
+ spin_lock_irqsave(&dbri->lock, flags);
dbri_cmdsend(dbri, cmd, 3);
+ spin_unlock_irqrestore(&dbri->lock, flags);
dbri_cmdwait(dbri);
+
}
static void recv_fixed(struct snd_dbri * dbri, int pipe, volatile __u32 * ptr)
@@ -1039,6 +1061,8 @@
* be spread across multiple descriptors.
*
* All descriptors create a ring buffer.
+ *
+ * Lock must be held before calling this.
*/
static int setup_descs(struct snd_dbri * dbri, int streamno, unsigned int period)
{
@@ -1186,6 +1210,9 @@
enum master_or_slave { CHImaster, CHIslave };
+/*
+ * Lock must not be held before calling it.
+ */
static void reset_chi(struct snd_dbri * dbri, enum master_or_slave master_or_slave,
int bits_per_frame)
{
@@ -1258,9 +1285,14 @@
In the standard SPARC audio configuration, the CS4215 codec is attached
to the DBRI via the CHI interface and few of the DBRI's PIO pins.
+ * Lock must not be held before calling it.
+
*/
static void cs4215_setup_pipes(struct snd_dbri * dbri)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dbri->lock, flags);
/*
* Data mode:
* Pipe 4: Send timeslots 1-4 (audio data)
@@ -1284,6 +1316,7 @@
setup_pipe(dbri, 17, D_SDP_FIXED | D_SDP_TO_SER | D_SDP_MSB);
setup_pipe(dbri, 18, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
setup_pipe(dbri, 19, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
+ spin_unlock_irqrestore(&dbri->lock, flags);
dbri_cmdwait(dbri);
}
@@ -1358,6 +1391,7 @@
{
int data_width;
u32 tmp;
+ unsigned long flags;
dprintk(D_MM, "cs4215_open: %d channels, %d bits\n",
dbri->mm.channels, dbri->mm.precision);
@@ -1382,6 +1416,7 @@
* bits. The CS4215, it seems, observes TSIN (the delayed signal)
* even if it's the CHI master. Don't ask me...
*/
+ spin_lock_irqsave(&dbri->lock, flags);
tmp = sbus_readl(dbri->regs + REG0);
tmp &= ~(D_C); /* Disable CHI */
sbus_writel(tmp, dbri->regs + REG0);
@@ -1409,6 +1444,7 @@
tmp = sbus_readl(dbri->regs + REG0);
tmp |= D_C; /* Enable CHI */
sbus_writel(tmp, dbri->regs + REG0);
+ spin_unlock_irqrestore(&dbri->lock, flags);
cs4215_setdata(dbri, 0);
}
@@ -1420,6 +1456,7 @@
{
int i, val;
u32 tmp;
+ unsigned long flags;
/* FIXME - let the CPU do something useful during these delays */
@@ -1456,6 +1493,7 @@
* done in hardware by a TI 248 that delays the DBRI->4215
* frame sync signal by eight clock cycles. Anybody know why?
*/
+ spin_lock_irqsave(&dbri->lock, flags);
tmp = sbus_readl(dbri->regs + REG0);
tmp &= ~D_C; /* Disable CHI */
sbus_writel(tmp, dbri->regs + REG0);
@@ -1472,14 +1510,17 @@
link_time_slot(dbri, 17, 16, 16, 32, dbri->mm.offset);
link_time_slot(dbri, 18, 16, 16, 8, dbri->mm.offset);
link_time_slot(dbri, 19, 18, 16, 8, dbri->mm.offset + 48);
+ spin_unlock_irqrestore(&dbri->lock, flags);
/* Wait for the chip to echo back CLB (Control Latch Bit) as zero */
dbri->mm.ctrl[0] &= ~CS4215_CLB;
xmit_fixed(dbri, 17, *(int *)dbri->mm.ctrl);
+ spin_lock_irqsave(&dbri->lock, flags);
tmp = sbus_readl(dbri->regs + REG0);
tmp |= D_C; /* Enable CHI */
sbus_writel(tmp, dbri->regs + REG0);
+ spin_unlock_irqrestore(&dbri->lock, flags);
for (i = 10; ((dbri->mm.status & 0xe4) != 0x20); --i) {
msleep_interruptible(1);
@@ -1688,6 +1729,7 @@
dbri->pipes[info->pipe].desc = first_td;
}
}
+
spin_unlock_irqrestore(&dbri->lock, flags);
}
@@ -2093,7 +2135,6 @@
{
struct snd_dbri *dbri = snd_pcm_substream_chip(substream);
struct dbri_streaminfo *info = DBRI_STREAM(dbri, substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
int ret;
info->size = snd_pcm_lib_buffer_bytes(substream);
@@ -2232,7 +2273,6 @@
{
struct snd_dbri *dbri = snd_kcontrol_chip(kcontrol);
struct dbri_streaminfo *info = &dbri->stream_info[kcontrol->private_value];
- unsigned long flags;
int changed = 0;
if (info->left_gain != ucontrol->value.integer.value[0]) {
@@ -2247,13 +2287,9 @@
/* First mute outputs, and wait 1/8000 sec (125 us)
* to make sure this takes. This avoids clicking noises.
*/
- spin_lock_irqsave(&dbri->lock, flags);
-
cs4215_setdata(dbri, 1);
udelay(125);
cs4215_setdata(dbri, 0);
-
- spin_unlock_irqrestore(&dbri->lock, flags);
}
return changed;
}
@@ -2300,7 +2336,6 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_dbri *dbri = snd_kcontrol_chip(kcontrol);
- unsigned long flags;
int elem = kcontrol->private_value & 0xff;
int shift = (kcontrol->private_value >> 8) & 0xff;
int mask = (kcontrol->private_value >> 16) & 0xff;
@@ -2333,13 +2368,9 @@
/* First mute outputs, and wait 1/8000 sec (125 us)
* to make sure this takes. This avoids clicking noises.
*/
- spin_lock_irqsave(&dbri->lock, flags);
-
cs4215_setdata(dbri, 1);
udelay(125);
cs4215_setdata(dbri, 0);
-
- spin_unlock_irqrestore(&dbri->lock, flags);
}
return changed;
}