HID: separate quirks for report descriptor fixup
Lately there have been quite a lot of bug reports against broken devices
which require us to fix their report descriptor in the runtime, before it
is passed to the HID parser. Those devices have eaten quite an amount of
our quirks space, which isn't particularly necessary - the quirks are not
needed after the report descriptor is parsed, and they just consume bits.
Therefore this patch separates the quirks for report descriptor fixup, and
moves their handling into separate code. The quirks are then forgotten as
soon as the report descriptor has been parsed.
Module parameter 'rdesc_quirks' is introduced to be able to modify these
quirks in runtime in a similar way to 'quirks' parameter for ordinary HID
quirks.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index a78f518..a75c236f 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -299,8 +299,6 @@
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
- { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
-
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
{ USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM, HID_QUIRK_HIDDEV },
@@ -424,17 +422,11 @@
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_LOGITECH_DESCRIPTOR },
-
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
- { USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_PETALYNX_DESCRIPTOR | HID_QUIRK_NOGET },
-
{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
@@ -443,6 +435,7 @@
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
@@ -466,8 +459,26 @@
{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
- { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_SWAPPED_MIN_MAX },
- { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_SWAPPED_MIN_MAX },
+ { 0, 0 }
+};
+
+/* Quirks for devices which require report descriptor fixup go here */
+static const struct hid_rdesc_blacklist {
+ __u16 idVendor;
+ __u16 idProduct;
+ __u32 quirks;
+} hid_rdesc_blacklist[] = {
+
+ { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_RDESC_CYMOTION },
+
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_RDESC_LOGITECH },
+
+ { USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_RDESC_PETALYNX },
+
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
{ 0, 0 }
};
@@ -576,7 +587,6 @@
return 0;
}
-
/**
* usbhid_remove_all_dquirks: remove all runtime HID quirks from memory
*
@@ -709,3 +719,126 @@
return quirks;
}
+/*
+ * Cherry Cymotion keyboard have an invalid HID report descriptor,
+ * that needs fixing before we can parse it.
+ */
+static void usbhid_fixup_cymotion_descriptor(char *rdesc, int rsize)
+{
+ if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
+ printk(KERN_INFO "Fixing up Cherry Cymotion report descriptor\n");
+ rdesc[11] = rdesc[16] = 0xff;
+ rdesc[12] = rdesc[17] = 0x03;
+ }
+}
+
+
+/*
+ * Certain Logitech keyboards send in report #3 keys which are far
+ * above the logical maximum described in descriptor. This extends
+ * the original value of 0x28c of logical maximum to 0x104d
+ */
+static void usbhid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
+{
+ if (rsize >= 90 && rdesc[83] == 0x26
+ && rdesc[84] == 0x8c
+ && rdesc[85] == 0x02) {
+ printk(KERN_INFO "Fixing up Logitech keyboard report descriptor\n");
+ rdesc[84] = rdesc[89] = 0x4d;
+ rdesc[85] = rdesc[90] = 0x10;
+ }
+}
+
+/* Petalynx Maxter Remote has maximum for consumer page set too low */
+static void usbhid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
+{
+ if (rsize >= 60 && rdesc[39] == 0x2a
+ && rdesc[40] == 0xf5
+ && rdesc[41] == 0x00
+ && rdesc[59] == 0x26
+ && rdesc[60] == 0xf9
+ && rdesc[61] == 0x00) {
+ printk(KERN_INFO "Fixing up Petalynx Maxter Remote report descriptor\n");
+ rdesc[60] = 0xfa;
+ rdesc[40] = 0xfa;
+ }
+}
+
+/*
+ * Some USB barcode readers from cypress have usage min and usage max in
+ * the wrong order
+ */
+static void usbhid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
+{
+ short fixed = 0;
+ int i;
+
+ for (i = 0; i < rsize - 4; i++) {
+ if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
+ unsigned char tmp;
+
+ rdesc[i] = 0x19; rdesc[i+2] = 0x29;
+ tmp = rdesc[i+3];
+ rdesc[i+3] = rdesc[i+1];
+ rdesc[i+1] = tmp;
+ }
+ }
+
+ if (fixed)
+ printk(KERN_INFO "Fixing up Cypress report descriptor\n");
+}
+
+
+static void __usbhid_fixup_report_descriptor(__u32 quirks, char *rdesc, unsigned rsize)
+{
+ if ((quirks & HID_QUIRK_RDESC_CYMOTION))
+ usbhid_fixup_cymotion_descriptor(rdesc, rsize);
+
+ if (quirks & HID_QUIRK_RDESC_LOGITECH)
+ usbhid_fixup_logitech_descriptor(rdesc, rsize);
+
+ if (quirks & HID_QUIRK_RDESC_SWAPPED_MIN_MAX)
+ usbhid_fixup_cypress_descriptor(rdesc, rsize);
+
+ if (quirks & HID_QUIRK_RDESC_PETALYNX)
+ usbhid_fixup_petalynx_descriptor(rdesc, rsize);
+}
+
+/**
+ * usbhid_fixup_report_descriptor: check if report descriptor needs fixup
+ *
+ * Description:
+ * Walks the hid_rdesc_blacklist[] array and checks whether the device
+ * is known to have broken report descriptor that needs to be fixed up
+ * prior to entering the HID parser
+ *
+ * Returns: nothing
+ */
+void usbhid_fixup_report_descriptor(const u16 idVendor, const u16 idProduct,
+ char *rdesc, unsigned rsize, char **quirks_param)
+{
+ int n, m;
+ u16 paramVendor, paramProduct;
+ u32 quirks;
+
+ /* static rdesc quirk entries */
+ for (n = 0; hid_rdesc_blacklist[n].idVendor; n++)
+ if (hid_rdesc_blacklist[n].idVendor == idVendor &&
+ hid_rdesc_blacklist[n].idProduct == idProduct)
+ __usbhid_fixup_report_descriptor(hid_rdesc_blacklist[n].quirks,
+ rdesc, rsize);
+
+ /* runtime rdesc quirk entries handling */
+ for (n = 0; quirks_param[n] && n < MAX_USBHID_BOOT_QUIRKS; n++) {
+ m = sscanf(quirks_param[n], "0x%hx:0x%hx:0x%x",
+ ¶mVendor, ¶mProduct, &quirks);
+
+ if (m != 3)
+ printk(KERN_WARNING
+ "Could not parse HID quirk module param %s\n",
+ quirks_param[n]);
+ else if (paramVendor == idVendor && paramProduct == idProduct)
+ __usbhid_fixup_report_descriptor(quirks, rdesc, rsize);
+ }
+
+}