S2io: Cleanup - removed unused variable intr_type
- Removed the unused variable, intr_type, in device private structure.
[ Resolve conflicts with napi_struct changes... -DaveM ]
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 182643f..2ee2a2b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1611,7 +1611,7 @@
val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
RTI_DATA2_MEM_RX_UFC_B(0x2) ;
- if (nic->intr_type == MSI_X)
+ if (nic->config.intr_type == MSI_X)
val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
RTI_DATA2_MEM_RX_UFC_D(0x40));
else
@@ -1749,7 +1749,7 @@
static int s2io_link_fault_indication(struct s2io_nic *nic)
{
- if (nic->intr_type != INTA)
+ if (nic->config.intr_type != INTA)
return MAC_RMAC_ERR_TIMER;
if (nic->device_type == XFRAME_II_DEVICE)
return LINK_UP_DOWN_INTERRUPT;
@@ -3549,7 +3549,7 @@
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
- if (sp->intr_type == INTA)
+ if (sp->config.intr_type == INTA)
val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#else
@@ -3572,7 +3572,7 @@
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
- if (sp->intr_type == INTA)
+ if (sp->config.intr_type == INTA)
val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#endif
@@ -3848,7 +3848,7 @@
napi_enable(&sp->napi);
- if (sp->intr_type == MSI_X) {
+ if (sp->config.intr_type == MSI_X) {
int ret = s2io_enable_msi_x(sp);
if (!ret) {
@@ -3880,12 +3880,12 @@
DBG_PRINT(ERR_DBG,
"%s: MSI-X requested but failed to enable\n",
dev->name);
- sp->intr_type = INTA;
+ sp->config.intr_type = INTA;
}
}
/* NAPI doesn't work well with MSI(X) */
- if (sp->intr_type != INTA) {
+ if (sp->config.intr_type != INTA) {
if(sp->config.napi)
sp->config.napi = 0;
}
@@ -3910,7 +3910,7 @@
hw_init_failed:
napi_disable(&sp->napi);
- if (sp->intr_type == MSI_X) {
+ if (sp->config.intr_type == MSI_X) {
if (sp->entries) {
kfree(sp->entries);
sp->mac_control.stats_info->sw_stat.mem_freed
@@ -6697,18 +6697,18 @@
struct net_device *dev = sp->dev;
int err = 0;
- if (sp->intr_type == MSI_X)
+ if (sp->config.intr_type == MSI_X)
ret = s2io_enable_msi_x(sp);
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
- sp->intr_type = INTA;
+ sp->config.intr_type = INTA;
}
/* Store the values of the MSIX table in the struct s2io_nic structure */
store_xmsi_data(sp);
/* After proper initialization of H/W, register ISR */
- if (sp->intr_type == MSI_X) {
+ if (sp->config.intr_type == MSI_X) {
int i, msix_tx_cnt=0,msix_rx_cnt=0;
for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
@@ -6760,7 +6760,7 @@
printk("MSI-X-TX %d entries enabled\n",msix_tx_cnt);
printk("MSI-X-RX %d entries enabled\n",msix_rx_cnt);
}
- if (sp->intr_type == INTA) {
+ if (sp->config.intr_type == INTA) {
err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
sp->name, dev);
if (err) {
@@ -6777,7 +6777,7 @@
struct net_device *dev = sp->dev;
struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
- if (sp->intr_type == MSI_X) {
+ if (sp->config.intr_type == MSI_X) {
int i;
u16 msi_control;
@@ -6950,7 +6950,7 @@
/* Add interrupt service routine */
if (s2io_add_isr(sp) != 0) {
- if (sp->intr_type == MSI_X)
+ if (sp->config.intr_type == MSI_X)
s2io_rem_isr(sp);
s2io_reset(sp);
free_rx_buffers(sp);
@@ -6964,7 +6964,7 @@
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
- if (sp->intr_type != INTA)
+ if (sp->config.intr_type != INTA)
en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
else {
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
@@ -7491,7 +7491,7 @@
if (rx_ring_mode == 2)
sp->rxd_mode = RXD_MODE_3B;
- sp->intr_type = dev_intr_type;
+ sp->config.intr_type = dev_intr_type;
if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
(pdev->device == PCI_DEVICE_ID_HERC_UNI))
@@ -7770,7 +7770,7 @@
if (napi)
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
- switch(sp->intr_type) {
+ switch(sp->config.intr_type) {
case INTA:
DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
break;