blob: f807c8ba26e4828298ec53d50a9a38dbac198b2c [file] [log] [blame]
/*
Mantis PCI bridge driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_uart.h"
struct mantis_uart_params {
enum mantis_baud baud_rate;
enum mantis_parity parity;
};
static struct {
char string[7];
} rates[5] = {
{ "9600" },
{ "19200" },
{ "38400" },
{ "57600" },
{ "115200" }
};
static struct {
char string[5];
} parity[3] = {
{ "NONE" },
{ "ODD" },
{ "EVEN" }
};
#define UART_MAX_BUF 16
int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
{
struct mantis_hwconfig *config = mantis->hwconfig;
u32 stat = 0, i;
/* get data */
for (i = 0; i < (config->bytes + 1); i++) {
stat = mmread(MANTIS_UART_STAT);
if (stat & MANTIS_UART_RXFIFO_FULL) {
dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
}
data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
if (data[i] & (1 << 7)) {
dprintk(MANTIS_ERROR, 1, "UART framing error");
return -EINVAL;
}
if (data[i] & (1 << 6)) {
dprintk(MANTIS_ERROR, 1, "UART parity error");
return -EINVAL;
}
}
return 0;
}
static void mantis_uart_work(struct work_struct *work)
{
struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
struct mantis_hwconfig *config = mantis->hwconfig;
u8 buf[16];
int i;
mantis_uart_read(mantis, buf);
for (i = 0; i < (config->bytes + 1); i++)
dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
dprintk(MANTIS_DEBUG, 0, "\n");
}
static int mantis_uart_setup(struct mantis_pci *mantis,
struct mantis_uart_params *params)
{
u32 reg;
mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
reg = mmread(MANTIS_UART_BAUD);
switch (params->baud_rate) {
case MANTIS_BAUD_9600:
reg |= 0xd8;
break;
case MANTIS_BAUD_19200:
reg |= 0x6c;
break;
case MANTIS_BAUD_38400:
reg |= 0x36;
break;
case MANTIS_BAUD_57600:
reg |= 0x23;
break;
case MANTIS_BAUD_115200:
reg |= 0x11;
break;
default:
return -EINVAL;
}
mmwrite(reg, MANTIS_UART_BAUD);
return 0;
}
int mantis_uart_init(struct mantis_pci *mantis)
{
struct mantis_hwconfig *config = mantis->hwconfig;
struct mantis_uart_params params;
/* default parity: */
params.baud_rate = config->baud_rate;
params.parity = config->parity;
dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
rates[params.baud_rate].string,
parity[params.parity].string);
init_waitqueue_head(&mantis->uart_wq);
spin_lock_init(&mantis->uart_lock);
INIT_WORK(&mantis->uart_work, mantis_uart_work);
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
mantis_uart_setup(mantis, &params);
/* default 1 byte */
mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
/* flush buffer */
mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
/* enable interrupt */
mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
schedule_work(&mantis->uart_work);
dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
return 0;
}
EXPORT_SYMBOL_GPL(mantis_uart_init);
void mantis_uart_exit(struct mantis_pci *mantis)
{
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
flush_work_sync(&mantis->uart_work);
}
EXPORT_SYMBOL_GPL(mantis_uart_exit);