blob: 6a1accd83aecd9171f719deca33a04e078534585 [file] [log] [blame]
/*
* Copyright © 2006-2007 Intel Corporation
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <acpi/button.h>
#include <linux/dmi.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include <linux/acpi.h>
/* Private structure for the integrated LVDS support */
struct intel_lvds_priv {
int fitting_mode;
u32 pfit_control;
u32 pfit_pgm_ratios;
};
/**
* Sets the backlight level.
*
* \param level backlight level, from 0 to intel_lvds_get_max_backlight().
*/
static void intel_lvds_set_backlight(struct drm_device *dev, int level)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 blc_pwm_ctl, reg;
if (HAS_PCH_SPLIT(dev))
reg = BLC_PWM_CPU_CTL;
else
reg = BLC_PWM_CTL;
blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(reg, (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
}
/**
* Returns the maximum level of the backlight duty cycle field.
*/
static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
if (HAS_PCH_SPLIT(dev))
reg = BLC_PWM_PCH_CTL2;
else
reg = BLC_PWM_CTL;
return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
}
/**
* Sets the power state for the panel.
*/
static void intel_lvds_set_power(struct drm_device *dev, bool on)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_status, ctl_reg, status_reg, lvds_reg;
if (HAS_PCH_SPLIT(dev)) {
ctl_reg = PCH_PP_CONTROL;
status_reg = PCH_PP_STATUS;
lvds_reg = PCH_LVDS;
} else {
ctl_reg = PP_CONTROL;
status_reg = PP_STATUS;
lvds_reg = LVDS;
}
if (on) {
I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
POSTING_READ(lvds_reg);
I915_WRITE(ctl_reg, I915_READ(ctl_reg) |
POWER_TARGET_ON);
do {
pp_status = I915_READ(status_reg);
} while ((pp_status & PP_ON) == 0);
intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
} else {
intel_lvds_set_backlight(dev, 0);
I915_WRITE(ctl_reg, I915_READ(ctl_reg) &
~POWER_TARGET_ON);
do {
pp_status = I915_READ(status_reg);
} while (pp_status & PP_ON);
I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
POSTING_READ(lvds_reg);
}
}
static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
if (mode == DRM_MODE_DPMS_ON)
intel_lvds_set_power(dev, true);
else
intel_lvds_set_power(dev, false);
/* XXX: We never power down the LVDS pairs. */
}
static int intel_lvds_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;
if (fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
}
return MODE_OK;
}
static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
/*
* float point operation is not supported . So the PANEL_RATIO_FACTOR
* is defined, which can avoid the float point computation when
* calculating the panel ratio.
*/
#define PANEL_RATIO_FACTOR 8192
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
u32 pfit_control = 0, pfit_pgm_ratios = 0;
int left_border = 0, right_border = 0, top_border = 0;
int bottom_border = 0;
bool border = 0;
int panel_ratio, desired_ratio, vert_scale, horiz_scale;
int horiz_ratio, vert_ratio;
u32 hsync_width, vsync_width;
u32 hblank_width, vblank_width;
u32 hsync_pos, vsync_pos;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
DRM_ERROR("Can't support LVDS on pipe A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
DRM_ERROR("Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
/* If we don't have a panel mode, there is nothing we can do */
if (dev_priv->panel_fixed_mode == NULL)
return true;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
*/
if (dev_priv->panel_fixed_mode != NULL) {
adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
adjusted_mode->hsync_start =
dev_priv->panel_fixed_mode->hsync_start;
adjusted_mode->hsync_end =
dev_priv->panel_fixed_mode->hsync_end;
adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
adjusted_mode->vsync_start =
dev_priv->panel_fixed_mode->vsync_start;
adjusted_mode->vsync_end =
dev_priv->panel_fixed_mode->vsync_end;
adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
/* Make sure pre-965s set dither correctly */
if (!IS_I965G(dev)) {
if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
}
/* Native modes don't need fitting */
if (adjusted_mode->hdisplay == mode->hdisplay &&
adjusted_mode->vdisplay == mode->vdisplay) {
pfit_pgm_ratios = 0;
border = 0;
goto out;
}
/* full screen scale for now */
if (HAS_PCH_SPLIT(dev))
goto out;
/* 965+ wants fuzzy fitting */
if (IS_I965G(dev))
pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
PFIT_FILTER_FUZZY;
hsync_width = adjusted_mode->crtc_hsync_end -
adjusted_mode->crtc_hsync_start;
vsync_width = adjusted_mode->crtc_vsync_end -
adjusted_mode->crtc_vsync_start;
hblank_width = adjusted_mode->crtc_hblank_end -
adjusted_mode->crtc_hblank_start;
vblank_width = adjusted_mode->crtc_vblank_end -
adjusted_mode->crtc_vblank_start;
/*
* Deal with panel fitting options. Figure out how to stretch the
* image based on its aspect ratio & the current panel fitting mode.
*/
panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
adjusted_mode->vdisplay;
desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
mode->vdisplay;
/*
* Enable automatic panel scaling for non-native modes so that they fill
* the screen. Should be enabled before the pipe is enabled, according
* to register description and PRM.
* Change the value here to see the borders for debugging
*/
if (!HAS_PCH_SPLIT(dev)) {
I915_WRITE(BCLRPAT_A, 0);
I915_WRITE(BCLRPAT_B, 0);
}
switch (lvds_priv->fitting_mode) {
case DRM_MODE_SCALE_CENTER:
/*
* For centered modes, we have to calculate border widths &
* heights and modify the values programmed into the CRTC.
*/
left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
right_border = left_border;
if (mode->hdisplay & 1)
right_border++;
top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
bottom_border = top_border;
if (mode->vdisplay & 1)
bottom_border++;
/* Set active & border values */
adjusted_mode->crtc_hdisplay = mode->hdisplay;
/* Keep the boder be even */
if (right_border & 1)
right_border++;
/* use the border directly instead of border minuse one */
adjusted_mode->crtc_hblank_start = mode->hdisplay +
right_border;
/* keep the blank width constant */
adjusted_mode->crtc_hblank_end =
adjusted_mode->crtc_hblank_start + hblank_width;
/* get the hsync pos relative to hblank start */
hsync_pos = (hblank_width - hsync_width) / 2;
/* keep the hsync pos be even */
if (hsync_pos & 1)
hsync_pos++;
adjusted_mode->crtc_hsync_start =
adjusted_mode->crtc_hblank_start + hsync_pos;
/* keep the hsync width constant */
adjusted_mode->crtc_hsync_end =
adjusted_mode->crtc_hsync_start + hsync_width;
adjusted_mode->crtc_vdisplay = mode->vdisplay;
/* use the border instead of border minus one */
adjusted_mode->crtc_vblank_start = mode->vdisplay +
bottom_border;
/* keep the vblank width constant */
adjusted_mode->crtc_vblank_end =
adjusted_mode->crtc_vblank_start + vblank_width;
/* get the vsync start postion relative to vblank start */
vsync_pos = (vblank_width - vsync_width) / 2;
adjusted_mode->crtc_vsync_start =
adjusted_mode->crtc_vblank_start + vsync_pos;
/* keep the vsync width constant */
adjusted_mode->crtc_vsync_end =
adjusted_mode->crtc_vsync_start + vsync_width;
border = 1;
break;
case DRM_MODE_SCALE_ASPECT:
/* Scale but preserve the spect ratio */
pfit_control |= PFIT_ENABLE;
if (IS_I965G(dev)) {
/* 965+ is easy, it does everything in hw */
if (panel_ratio > desired_ratio)
pfit_control |= PFIT_SCALING_PILLAR;
else if (panel_ratio < desired_ratio)
pfit_control |= PFIT_SCALING_LETTER;
else
pfit_control |= PFIT_SCALING_AUTO;
} else {
/*
* For earlier chips we have to calculate the scaling
* ratio by hand and program it into the
* PFIT_PGM_RATIO register
*/
u32 horiz_bits, vert_bits, bits = 12;
horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
adjusted_mode->hdisplay;
vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
adjusted_mode->vdisplay;
horiz_scale = adjusted_mode->hdisplay *
PANEL_RATIO_FACTOR / mode->hdisplay;
vert_scale = adjusted_mode->vdisplay *
PANEL_RATIO_FACTOR / mode->vdisplay;
/* retain aspect ratio */
if (panel_ratio > desired_ratio) { /* Pillar */
u32 scaled_width;
scaled_width = mode->hdisplay * vert_scale /
PANEL_RATIO_FACTOR;
horiz_ratio = vert_ratio;
pfit_control |= (VERT_AUTO_SCALE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
/* Pillar will have left/right borders */
left_border = (adjusted_mode->hdisplay -
scaled_width) / 2;
right_border = left_border;
if (mode->hdisplay & 1) /* odd resolutions */
right_border++;
/* keep the border be even */
if (right_border & 1)
right_border++;
adjusted_mode->crtc_hdisplay = scaled_width;
/* use border instead of border minus one */
adjusted_mode->crtc_hblank_start =
scaled_width + right_border;
/* keep the hblank width constant */
adjusted_mode->crtc_hblank_end =
adjusted_mode->crtc_hblank_start +
hblank_width;
/*
* get the hsync start pos relative to
* hblank start
*/
hsync_pos = (hblank_width - hsync_width) / 2;
/* keep the hsync_pos be even */
if (hsync_pos & 1)
hsync_pos++;
adjusted_mode->crtc_hsync_start =
adjusted_mode->crtc_hblank_start +
hsync_pos;
/* keept hsync width constant */
adjusted_mode->crtc_hsync_end =
adjusted_mode->crtc_hsync_start +
hsync_width;
border = 1;
} else if (panel_ratio < desired_ratio) { /* letter */
u32 scaled_height = mode->vdisplay *
horiz_scale / PANEL_RATIO_FACTOR;
vert_ratio = horiz_ratio;
pfit_control |= (HORIZ_AUTO_SCALE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
/* Letterbox will have top/bottom border */
top_border = (adjusted_mode->vdisplay -
scaled_height) / 2;
bottom_border = top_border;
if (mode->vdisplay & 1)
bottom_border++;
adjusted_mode->crtc_vdisplay = scaled_height;
/* use border instead of border minus one */
adjusted_mode->crtc_vblank_start =
scaled_height + bottom_border;
/* keep the vblank width constant */
adjusted_mode->crtc_vblank_end =
adjusted_mode->crtc_vblank_start +
vblank_width;
/*
* get the vsync start pos relative to
* vblank start
*/
vsync_pos = (vblank_width - vsync_width) / 2;
adjusted_mode->crtc_vsync_start =
adjusted_mode->crtc_vblank_start +
vsync_pos;
/* keep the vsync width constant */
adjusted_mode->crtc_vsync_end =
adjusted_mode->crtc_vsync_start +
vsync_width;
border = 1;
} else {
/* Aspects match, Let hw scale both directions */
pfit_control |= (VERT_AUTO_SCALE |
HORIZ_AUTO_SCALE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
}
horiz_bits = (1 << bits) * horiz_ratio /
PANEL_RATIO_FACTOR;
vert_bits = (1 << bits) * vert_ratio /
PANEL_RATIO_FACTOR;
pfit_pgm_ratios =
((vert_bits << PFIT_VERT_SCALE_SHIFT) &
PFIT_VERT_SCALE_MASK) |
((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
PFIT_HORIZ_SCALE_MASK);
}
break;
case DRM_MODE_SCALE_FULLSCREEN:
/*
* Full scaling, even if it changes the aspect ratio.
* Fortunately this is all done for us in hw.
*/
pfit_control |= PFIT_ENABLE;
if (IS_I965G(dev))
pfit_control |= PFIT_SCALING_AUTO;
else
pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
break;
default:
break;
}
out:
lvds_priv->pfit_control = pfit_control;
lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
* When there exists the border, it means that the LVDS_BORDR
* should be enabled.
*/
if (border)
dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
else
dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* user's requested refresh rate.
*/
return true;
}
static void intel_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
if (HAS_PCH_SPLIT(dev))
reg = BLC_PWM_CPU_CTL;
else
reg = BLC_PWM_CTL;
dev_priv->saveBLC_PWM_CTL = I915_READ(reg);
dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
intel_lvds_set_power(dev, false);
}
static void intel_lvds_commit( struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->backlight_duty_cycle == 0)
dev_priv->backlight_duty_cycle =
intel_lvds_get_max_backlight(dev);
intel_lvds_set_power(dev, true);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
if (HAS_PCH_SPLIT(dev))
return;
/*
* Enable automatic panel scaling so that non-native modes fill the
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
/**
* Detect the LVDS connection.
*
* Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
* connected and closed means disconnected. We also send hotplug events as
* needed, using lid status notification from the input layer.
*/
static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
enum drm_connector_status status = connector_status_connected;
/* ACPI lid methods were generally unreliable in this generation, so
* don't even bother.
*/
if (IS_GEN2(dev) || IS_GEN3(dev))
return connector_status_connected;
return status;
}
/**
* Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
*/
static int intel_lvds_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_encoder *encoder = intel_attached_encoder(connector);
struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
if (dev_priv->lvds_edid_good) {
ret = intel_ddc_get_modes(connector, intel_encoder->ddc_bus);
if (ret)
return ret;
}
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
* handed to valid_mode for checking
*/
connector->display_info.min_vfreq = 0;
connector->display_info.max_vfreq = 200;
connector->display_info.min_hfreq = 0;
connector->display_info.max_hfreq = 200;
if (dev_priv->panel_fixed_mode != NULL) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
drm_mode_probed_add(connector, mode);
return 1;
}
return 0;
}
/*
* Lid events. Note the use of 'modeset_on_lid':
* - we set it on lid close, and reset it on open
* - we use it as a "only once" bit (ie we ignore
* duplicate events where it was already properly
* set/reset)
* - the suspend/resume paths will also set it to
* zero, since they restore the mode ("lid open").
*/
static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
void *unused)
{
struct drm_i915_private *dev_priv =
container_of(nb, struct drm_i915_private, lid_notifier);
struct drm_device *dev = dev_priv->dev;
struct drm_connector *connector = dev_priv->int_lvds_connector;
/*
* check and update the status of LVDS connector after receiving
* the LID nofication event.
*/
if (connector)
connector->status = connector->funcs->detect(connector);
if (!acpi_lid_open()) {
dev_priv->modeset_on_lid = 1;
return NOTIFY_OK;
}
if (!dev_priv->modeset_on_lid)
return NOTIFY_OK;
dev_priv->modeset_on_lid = 0;
mutex_lock(&dev->mode_config.mutex);
drm_helper_resume_force_mode(dev);
mutex_unlock(&dev->mode_config.mutex);
return NOTIFY_OK;
}
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*
* Unregister the DDC bus for this connector then free the driver private
* structure.
*/
static void intel_lvds_destroy(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->lid_notifier.notifier_call)
acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
static int intel_lvds_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
struct drm_device *dev = connector->dev;
if (property == dev->mode_config.scaling_mode_property &&
connector->encoder) {
struct drm_crtc *crtc = connector->encoder->crtc;
struct drm_encoder *encoder = connector->encoder;
struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
if (value == DRM_MODE_SCALE_NONE) {
DRM_DEBUG_KMS("no scaling not supported\n");
return 0;
}
if (lvds_priv->fitting_mode == value) {
/* the LVDS scaling property is not changed */
return 0;
}
lvds_priv->fitting_mode = value;
if (crtc && crtc->enabled) {
/*
* If the CRTC is enabled, the display will be changed
* according to the new panel fitting mode.
*/
drm_crtc_helper_set_mode(crtc, &crtc->mode,
crtc->x, crtc->y, crtc->fb);
}
}
return 0;
}
static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
.dpms = intel_lvds_dpms,
.mode_fixup = intel_lvds_mode_fixup,
.prepare = intel_lvds_prepare,
.mode_set = intel_lvds_mode_set,
.commit = intel_lvds_commit,
};
static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
.get_modes = intel_lvds_get_modes,
.mode_valid = intel_lvds_mode_valid,
.best_encoder = intel_attached_encoder,
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.detect = intel_lvds_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_lvds_set_property,
.destroy = intel_lvds_destroy,
};
static void intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
if (intel_encoder->ddc_bus)
intel_i2c_destroy(intel_encoder->ddc_bus);
drm_encoder_cleanup(encoder);
kfree(intel_encoder);
}
static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
.destroy = intel_lvds_enc_destroy,
};
static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
/* These systems claim to have LVDS, but really don't */
static const struct dmi_system_id intel_no_lvds[] = {
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core 2 series)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "MSI IM-945GSE-A",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Dell Studio Hybrid",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "AOpen Mini PC",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "AOpen Mini PC MP915",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Aopen i945GTt-VFA",
.matches = {
DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Clientron U800",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
},
},
{ } /* terminating entry */
};
/**
* intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
* @dev: drm device
* @connector: LVDS connector
*
* Find the reduced downclock for LVDS in EDID.
*/
static void intel_find_lvds_downclock(struct drm_device *dev,
struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *scan, *panel_fixed_mode;
int temp_downclock;
panel_fixed_mode = dev_priv->panel_fixed_mode;
temp_downclock = panel_fixed_mode->clock;
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(scan, &connector->probed_modes, head) {
/*
* If one mode has the same resolution with the fixed_panel
* mode while they have the different refresh rate, it means
* that the reduced downclock is found for the LVDS. In such
* case we can set the different FPx0/1 to dynamically select
* between low and high frequency.
*/
if (scan->hdisplay == panel_fixed_mode->hdisplay &&
scan->hsync_start == panel_fixed_mode->hsync_start &&
scan->hsync_end == panel_fixed_mode->hsync_end &&
scan->htotal == panel_fixed_mode->htotal &&
scan->vdisplay == panel_fixed_mode->vdisplay &&
scan->vsync_start == panel_fixed_mode->vsync_start &&
scan->vsync_end == panel_fixed_mode->vsync_end &&
scan->vtotal == panel_fixed_mode->vtotal) {
if (scan->clock < temp_downclock) {
/*
* The downclock is already found. But we
* expect to find the lower downclock.
*/
temp_downclock = scan->clock;
}
}
}
mutex_unlock(&dev->mode_config.mutex);
if (temp_downclock < panel_fixed_mode->clock &&
i915_lvds_downclock) {
/* We found the downclock for LVDS. */
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
"Normal clock %dKhz, downclock %dKhz\n",
panel_fixed_mode->clock, temp_downclock);
}
return;
}
/*
* Enumerate the child dev array parsed from VBT to check whether
* the LVDS is present.
* If it is present, return 1.
* If it is not present, return false.
* If no child dev is parsed from VBT, it assumes that the LVDS is present.
* Note: The addin_offset should also be checked for LVDS panel.
* Only when it is non-zero, it is assumed that it is present.
*/
static int lvds_is_present_in_vbt(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct child_device_config *p_child;
int i, ret;
if (!dev_priv->child_dev_num)
return 1;
ret = 0;
for (i = 0; i < dev_priv->child_dev_num; i++) {
p_child = dev_priv->child_dev + i;
/*
* If the device type is not LFP, continue.
* If the device type is 0x22, it is also regarded as LFP.
*/
if (p_child->device_type != DEVICE_TYPE_INT_LFP &&
p_child->device_type != DEVICE_TYPE_LFP)
continue;
/* The addin_offset should be checked. Only when it is
* non-zero, it is regarded as present.
*/
if (p_child->addin_offset) {
ret = 1;
break;
}
}
return ret;
}
/**
* intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
void intel_lvds_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
struct intel_connector *intel_connector;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
struct intel_lvds_priv *lvds_priv;
u32 lvds;
int pipe, gpio = GPIOC;
/* Skip init on machines we know falsely report LVDS */
if (dmi_check_system(intel_no_lvds))
return;
if (!lvds_is_present_in_vbt(dev)) {
DRM_DEBUG_KMS("LVDS is not present in VBT\n");
return;
}
if (HAS_PCH_SPLIT(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
return;
if (dev_priv->edp_support) {
DRM_DEBUG_KMS("disable LVDS for eDP support\n");
return;
}
gpio = PCH_GPIOC;
}
intel_encoder = kzalloc(sizeof(struct intel_encoder) +
sizeof(struct intel_lvds_priv), GFP_KERNEL);
if (!intel_encoder) {
return;
}
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_encoder);
return;
}
connector = &intel_connector->base;
encoder = &intel_encoder->enc;
drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_encoder_init(dev, &intel_encoder->enc, &intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS);
drm_mode_connector_attach_encoder(&intel_connector->base, &intel_encoder->enc);
intel_encoder->type = INTEL_OUTPUT_LVDS;
intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
intel_encoder->crtc_mask = (1 << 1);
if (IS_I965G(dev))
intel_encoder->crtc_mask |= (1 << 0);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
lvds_priv = (struct intel_lvds_priv *)(intel_encoder + 1);
intel_encoder->dev_priv = lvds_priv;
/* create the scaling mode property */
drm_mode_create_scaling_mode_property(dev);
/*
* the initial panel fitting mode will be FULL_SCREEN.
*/
drm_connector_attach_property(&intel_connector->base,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
/*
* LVDS discovery:
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
* 4) make sure lid is open
* if closed, act like it's not there for now
*/
/* Set up the DDC bus. */
intel_encoder->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C");
if (!intel_encoder->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
goto failed;
}
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
dev_priv->lvds_edid_good = true;
if (!intel_ddc_get_modes(connector, intel_encoder->ddc_bus))
dev_priv->lvds_edid_good = false;
list_for_each_entry(scan, &connector->probed_modes, head) {
mutex_lock(&dev->mode_config.mutex);
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
dev_priv->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
mutex_unlock(&dev->mode_config.mutex);
intel_find_lvds_downclock(dev, connector);
goto out;
}
mutex_unlock(&dev->mode_config.mutex);
}
/* Failed to get EDID, what about VBT? */
if (dev_priv->lfp_lvds_vbt_mode) {
mutex_lock(&dev->mode_config.mutex);
dev_priv->panel_fixed_mode =
drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
mutex_unlock(&dev->mode_config.mutex);
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
goto out;
}
}
/*
* If we didn't get EDID, try checking if the panel is already turned
* on. If so, assume that whatever is currently programmed is the
* correct mode.
*/
/* Ironlake: FIXME if still fail, not try pipe mode now */
if (HAS_PCH_SPLIT(dev))
goto failed;
lvds = I915_READ(LVDS);
pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
crtc = intel_get_crtc_from_pipe(dev, pipe);
if (crtc && (lvds & LVDS_PORT_EN)) {
dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc);
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
goto out;
}
}
/* If we still don't have a mode after all that, give up. */
if (!dev_priv->panel_fixed_mode)
goto failed;
out:
if (HAS_PCH_SPLIT(dev)) {
u32 pwm;
/* make sure PWM is enabled */
pwm = I915_READ(BLC_PWM_CPU_CTL2);
pwm |= (PWM_ENABLE | PWM_PIPE_B);
I915_WRITE(BLC_PWM_CPU_CTL2, pwm);
pwm = I915_READ(BLC_PWM_PCH_CTL1);
pwm |= PWM_PCH_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
}
dev_priv->lid_notifier.notifier_call = intel_lid_notify;
if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
DRM_DEBUG_KMS("lid notifier registration failed\n");
dev_priv->lid_notifier.notifier_call = NULL;
}
/* keep the LVDS connector */
dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
return;
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
if (intel_encoder->ddc_bus)
intel_i2c_destroy(intel_encoder->ddc_bus);
drm_connector_cleanup(connector);
drm_encoder_cleanup(encoder);
kfree(intel_encoder);
kfree(intel_connector);
}