[SCSI] qla2xxx: Correct NPIV support for recent ISPs.
Firmware will export to software the maximum number of vports
supported for any given firmware version and ISP type. Use this
information rather than the current hardcoding of limitations
within the driver.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index fb388b8..745283f 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1124,7 +1124,7 @@
down(&ha->vport_sem);
ha->cur_vport_count--;
- clear_bit(vha->vp_idx, (unsigned long *)ha->vp_idx_map);
+ clear_bit(vha->vp_idx, ha->vp_idx_map);
up(&ha->vport_sem);
kfree(vha->node_name);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 04e8cbc..fe8f782 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2116,14 +2116,6 @@
#define WATCH_INTERVAL 1 /* number of seconds */
-/* NPIV */
-#define MAX_MULTI_ID_LOOP 126
-#define MAX_MULTI_ID_FABRIC 64
-#define MAX_NUM_VPORT_LOOP (MAX_MULTI_ID_LOOP - 1)
-#define MAX_NUM_VPORT_FABRIC (MAX_MULTI_ID_FABRIC - 1)
-#define MAX_NUM_VHBA_LOOP (MAX_MULTI_ID_LOOP - 1)
-#define MAX_NUM_VHBA_FABRIC (MAX_MULTI_ID_FABRIC - 1)
-
/*
* Linux Host Adapter structure
*/
@@ -2507,7 +2499,7 @@
struct list_head vp_list; /* list of VP */
struct fc_vport *fc_vport; /* holds fc_vport * for each vport */
- uint8_t vp_idx_map[16];
+ unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) / sizeof(unsigned long)];
uint16_t num_vhosts; /* number of vports created */
uint16_t num_vsans; /* number of vsan created */
uint16_t vp_idx; /* vport ID */
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 25364b1..69a5e31 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -954,7 +954,15 @@
/* MID Support ***************************************************************/
-#define MAX_MID_VPS 125
+#define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */
+#define MAX_MULTI_ID_FABRIC 256 /* ... */
+
+#define for_each_mapped_vp_idx(_ha, _idx) \
+ for (_idx = find_next_bit((_ha)->vp_idx_map, \
+ (_ha)->max_npiv_vports + 1, 1); \
+ _idx <= (_ha)->max_npiv_vports; \
+ _idx = find_next_bit((_ha)->vp_idx_map, \
+ (_ha)->max_npiv_vports + 1, _idx + 1)) \
struct mid_conf_entry_24xx {
uint16_t reserved_1;
@@ -982,7 +990,7 @@
uint16_t count;
uint16_t options;
- struct mid_conf_entry_24xx entries[MAX_MID_VPS];
+ struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
};
@@ -1002,10 +1010,6 @@
uint8_t reserved_1;
};
-struct mid_db_24xx {
- struct mid_db_entry_24xx entries[MAX_MID_VPS];
-};
-
/*
* Virtual Fabric ID type definition.
*/
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 191dafd..03444d6 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -922,9 +922,9 @@
ha->flags.npiv_supported = 1;
if ((!ha->max_npiv_vports) ||
((ha->max_npiv_vports + 1) %
- MAX_MULTI_ID_FABRIC))
+ MIN_MULTI_ID_FABRIC))
ha->max_npiv_vports =
- MAX_NUM_VPORT_FABRIC;
+ MIN_MULTI_ID_FABRIC - 1;
}
if (ql2xallocfwdump)
@@ -1162,7 +1162,8 @@
DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
- mid_init_cb->count = ha->max_npiv_vports;
+ mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+ mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
rval = qla2x00_init_firmware(ha, ha->init_cb_size);
if (rval) {
@@ -2566,14 +2567,7 @@
/* Bypass virtual ports of the same host. */
if (pha->num_vhosts) {
- vp_index = find_next_bit(
- (unsigned long *)pha->vp_idx_map,
- MAX_MULTI_ID_FABRIC + 1, 1);
-
- for (;vp_index <= MAX_MULTI_ID_FABRIC;
- vp_index = find_next_bit(
- (unsigned long *)pha->vp_idx_map,
- MAX_MULTI_ID_FABRIC + 1, vp_index + 1)) {
+ for_each_mapped_vp_idx(pha, vp_index) {
empty_vp_index = 1;
found_vp = 0;
list_for_each_entry(vha, &pha->vp_list,
@@ -2592,7 +2586,8 @@
new_fcport->d_id.b24 == vha->d_id.b24)
break;
}
- if (vp_index <= MAX_MULTI_ID_FABRIC)
+
+ if (vp_index <= pha->max_npiv_vports)
continue;
}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index ccd662a..031f269 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -905,7 +905,7 @@
mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID;
mcp->mb[9] = ha->vp_idx;
- mcp->out_mb = MBX_0;
+ mcp->out_mb = MBX_9|MBX_0;
mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
mcp->tov = 30;
mcp->flags = 0;
@@ -2873,7 +2873,7 @@
DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__,
ha->host_no, vp_index));
- if (vp_index == 0 || vp_index >= MAX_MULTI_ID_LOOP)
+ if (vp_index == 0 || vp_index >= ha->max_npiv_vports)
return QLA_PARAMETER_ERROR;
vce = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vce_dma);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 821ee74..74096aa 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -47,16 +47,15 @@
/* Find an empty slot and assign an vp_id */
down(&ha->vport_sem);
- vp_id = find_first_zero_bit((unsigned long *)ha->vp_idx_map,
- MAX_MULTI_ID_FABRIC);
- if (vp_id > MAX_MULTI_ID_FABRIC) {
- DEBUG15(printk ("vp_id %d is bigger than MAX_MULTI_ID_FABRID\n",
- vp_id));
+ vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
+ if (vp_id > ha->max_npiv_vports) {
+ DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
+ vp_id, ha->max_npiv_vports));
up(&ha->vport_sem);
return vp_id;
}
- set_bit(vp_id, (unsigned long *)ha->vp_idx_map);
+ set_bit(vp_id, ha->vp_idx_map);
ha->num_vhosts++;
vha->vp_idx = vp_id;
list_add_tail(&vha->vp_list, &ha->vp_list);
@@ -73,7 +72,7 @@
down(&ha->vport_sem);
vp_id = vha->vp_idx;
ha->num_vhosts--;
- clear_bit(vp_id, (unsigned long *)ha->vp_idx_map);
+ clear_bit(vp_id, ha->vp_idx_map);
list_del(&vha->vp_list);
up(&ha->vport_sem);
}
@@ -216,11 +215,7 @@
if (ha->parent)
return;
- i = find_next_bit((unsigned long *)ha->vp_idx_map,
- MAX_MULTI_ID_FABRIC + 1, 1);
- for (;i <= MAX_MULTI_ID_FABRIC;
- i = find_next_bit((unsigned long *)ha->vp_idx_map,
- MAX_MULTI_ID_FABRIC + 1, i + 1)) {
+ for_each_mapped_vp_idx(ha, i) {
vp_idx_matched = 0;
list_for_each_entry(vha, &ha->vp_list, vp_list) {
@@ -311,11 +306,7 @@
clear_bit(VP_DPC_NEEDED, &ha->dpc_flags);
- i = find_next_bit((unsigned long *)ha->vp_idx_map,
- MAX_MULTI_ID_FABRIC + 1, 1);
- for (;i <= MAX_MULTI_ID_FABRIC;
- i = find_next_bit((unsigned long *)ha->vp_idx_map,
- MAX_MULTI_ID_FABRIC + 1, i + 1)) {
+ for_each_mapped_vp_idx(ha, i) {
vp_idx_matched = 0;
list_for_each_entry(vha, &ha->vp_list, vp_list) {
@@ -356,9 +347,9 @@
/* Check up max-npiv-supports */
if (ha->num_vhosts > ha->max_npiv_vports) {
- DEBUG15(printk("scsi(%ld): num_vhosts %d is bigger than "
- "max_npv_vports %d.\n", ha->host_no,
- (uint16_t) ha->num_vhosts, (int) ha->max_npiv_vports));
+ DEBUG15(printk("scsi(%ld): num_vhosts %ud is bigger than "
+ "max_npv_vports %ud.\n", ha->host_no,
+ ha->num_vhosts, ha->max_npiv_vports));
return VPCERR_UNSUPPORTED;
}
return 0;
@@ -450,7 +441,7 @@
num_hosts++;
down(&ha->vport_sem);
- set_bit(vha->vp_idx, (unsigned long *)ha->vp_idx_map);
+ set_bit(vha->vp_idx, ha->vp_idx_map);
ha->cur_vport_count++;
up(&ha->vport_sem);