| /* |
| * Watchdog driver for Atmel AT32AP700X devices |
| * |
| * Copyright (C) 2005-2006 Atmel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * |
| * Errata: WDT Clear is blocked after WDT Reset |
| * |
| * A watchdog timer event will, after reset, block writes to the WDT_CLEAR |
| * register, preventing the program to clear the next Watchdog Timer Reset. |
| * |
| * If you still want to use the WDT after a WDT reset a small code can be |
| * insterted at the startup checking the AVR32_PM.rcause register for WDT reset |
| * and use a GPIO pin to reset the system. This method requires that one of the |
| * GPIO pins are available and connected externally to the RESET_N pin. After |
| * the GPIO pin has pulled down the reset line the GPIO will be reset and leave |
| * the pin tristated with pullup. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/miscdevice.h> |
| #include <linux/fs.h> |
| #include <linux/platform_device.h> |
| #include <linux/watchdog.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| |
| #define TIMEOUT_MIN 1 |
| #define TIMEOUT_MAX 2 |
| #define TIMEOUT_DEFAULT TIMEOUT_MAX |
| |
| /* module parameters */ |
| static int timeout = TIMEOUT_DEFAULT; |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, |
| "Timeout value. Limited to be 1 or 2 seconds. (default=" |
| __MODULE_STRING(TIMEOUT_DEFAULT) ")"); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* Watchdog registers and write/read macro */ |
| #define WDT_CTRL 0x00 |
| #define WDT_CTRL_EN 0 |
| #define WDT_CTRL_PSEL 8 |
| #define WDT_CTRL_KEY 24 |
| |
| #define WDT_CLR 0x04 |
| |
| #define WDT_RCAUSE 0x10 |
| #define WDT_RCAUSE_POR 0 |
| #define WDT_RCAUSE_EXT 2 |
| #define WDT_RCAUSE_WDT 3 |
| #define WDT_RCAUSE_JTAG 4 |
| #define WDT_RCAUSE_SERP 5 |
| |
| #define WDT_BIT(name) (1 << WDT_##name) |
| #define WDT_BF(name, value) ((value) << WDT_##name) |
| |
| #define wdt_readl(dev, reg) \ |
| __raw_readl((dev)->regs + WDT_##reg) |
| #define wdt_writel(dev, reg, value) \ |
| __raw_writel((value), (dev)->regs + WDT_##reg) |
| |
| struct wdt_at32ap700x { |
| void __iomem *regs; |
| spinlock_t io_lock; |
| int timeout; |
| int boot_status; |
| unsigned long users; |
| struct miscdevice miscdev; |
| }; |
| |
| static struct wdt_at32ap700x *wdt; |
| static char expect_release; |
| |
| /* |
| * Disable the watchdog. |
| */ |
| static inline void at32_wdt_stop(void) |
| { |
| unsigned long psel; |
| |
| spin_lock(&wdt->io_lock); |
| psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f); |
| wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55)); |
| wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa)); |
| spin_unlock(&wdt->io_lock); |
| } |
| |
| /* |
| * Enable and reset the watchdog. |
| */ |
| static inline void at32_wdt_start(void) |
| { |
| /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */ |
| unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe; |
| |
| spin_lock(&wdt->io_lock); |
| wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) |
| | WDT_BF(CTRL_PSEL, psel) |
| | WDT_BF(CTRL_KEY, 0x55)); |
| wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) |
| | WDT_BF(CTRL_PSEL, psel) |
| | WDT_BF(CTRL_KEY, 0xaa)); |
| spin_unlock(&wdt->io_lock); |
| } |
| |
| /* |
| * Pat the watchdog timer. |
| */ |
| static inline void at32_wdt_pat(void) |
| { |
| spin_lock(&wdt->io_lock); |
| wdt_writel(wdt, CLR, 0x42); |
| spin_unlock(&wdt->io_lock); |
| } |
| |
| /* |
| * Watchdog device is opened, and watchdog starts running. |
| */ |
| static int at32_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(1, &wdt->users)) |
| return -EBUSY; |
| |
| at32_wdt_start(); |
| return nonseekable_open(inode, file); |
| } |
| |
| /* |
| * Close the watchdog device. |
| */ |
| static int at32_wdt_close(struct inode *inode, struct file *file) |
| { |
| if (expect_release == 42) { |
| at32_wdt_stop(); |
| } else { |
| dev_dbg(wdt->miscdev.parent, |
| "unexpected close, not stopping watchdog!\n"); |
| at32_wdt_pat(); |
| } |
| clear_bit(1, &wdt->users); |
| expect_release = 0; |
| return 0; |
| } |
| |
| /* |
| * Change the watchdog time interval. |
| */ |
| static int at32_wdt_settimeout(int time) |
| { |
| /* |
| * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is |
| * 2 ^ 16 allowing up to 2 seconds timeout. |
| */ |
| if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX)) |
| return -EINVAL; |
| |
| /* |
| * Set new watchdog time. It will be used when at32_wdt_start() is |
| * called. |
| */ |
| wdt->timeout = time; |
| return 0; |
| } |
| |
| /* |
| * Get the watchdog status. |
| */ |
| static int at32_wdt_get_status(void) |
| { |
| int rcause; |
| int status = 0; |
| |
| rcause = wdt_readl(wdt, RCAUSE); |
| |
| switch (rcause) { |
| case WDT_BIT(RCAUSE_EXT): |
| status = WDIOF_EXTERN1; |
| break; |
| case WDT_BIT(RCAUSE_WDT): |
| status = WDIOF_CARDRESET; |
| break; |
| case WDT_BIT(RCAUSE_POR): /* fall through */ |
| case WDT_BIT(RCAUSE_JTAG): /* fall through */ |
| case WDT_BIT(RCAUSE_SERP): /* fall through */ |
| default: |
| break; |
| } |
| |
| return status; |
| } |
| |
| static struct watchdog_info at32_wdt_info = { |
| .identity = "at32ap700x watchdog", |
| .options = WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| }; |
| |
| /* |
| * Handle commands from user-space. |
| */ |
| static int at32_wdt_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int ret = -ENOTTY; |
| int time; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| |
| switch (cmd) { |
| case WDIOC_KEEPALIVE: |
| at32_wdt_pat(); |
| ret = 0; |
| break; |
| case WDIOC_GETSUPPORT: |
| ret = copy_to_user(argp, &at32_wdt_info, |
| sizeof(at32_wdt_info)) ? -EFAULT : 0; |
| break; |
| case WDIOC_SETTIMEOUT: |
| ret = get_user(time, p); |
| if (ret) |
| break; |
| ret = at32_wdt_settimeout(time); |
| if (ret) |
| break; |
| /* Enable new time value */ |
| at32_wdt_start(); |
| /* fall through */ |
| case WDIOC_GETTIMEOUT: |
| ret = put_user(wdt->timeout, p); |
| break; |
| case WDIOC_GETSTATUS: |
| ret = put_user(0, p); |
| break; |
| case WDIOC_GETBOOTSTATUS: |
| ret = put_user(wdt->boot_status, p); |
| break; |
| case WDIOC_SETOPTIONS: |
| ret = get_user(time, p); |
| if (ret) |
| break; |
| if (time & WDIOS_DISABLECARD) |
| at32_wdt_stop(); |
| if (time & WDIOS_ENABLECARD) |
| at32_wdt_start(); |
| ret = 0; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static ssize_t at32_wdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* |
| * note: just in case someone wrote the magic |
| * character five months ago... |
| */ |
| expect_release = 0; |
| |
| /* |
| * scan to see whether or not we got the magic |
| * character |
| */ |
| for (i = 0; i != len; i++) { |
| char c; |
| if (get_user(c, data+i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_release = 42; |
| } |
| } |
| /* someone wrote to us, we should pat the watchdog */ |
| at32_wdt_pat(); |
| } |
| return len; |
| } |
| |
| static const struct file_operations at32_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .ioctl = at32_wdt_ioctl, |
| .open = at32_wdt_open, |
| .release = at32_wdt_close, |
| .write = at32_wdt_write, |
| }; |
| |
| static int __init at32_wdt_probe(struct platform_device *pdev) |
| { |
| struct resource *regs; |
| int ret; |
| |
| if (wdt) { |
| dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n"); |
| return -EBUSY; |
| } |
| |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!regs) { |
| dev_dbg(&pdev->dev, "missing mmio resource\n"); |
| return -ENXIO; |
| } |
| |
| wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL); |
| if (!wdt) { |
| dev_dbg(&pdev->dev, "no memory for wdt structure\n"); |
| return -ENOMEM; |
| } |
| |
| wdt->regs = ioremap(regs->start, regs->end - regs->start + 1); |
| if (!wdt->regs) { |
| ret = -ENOMEM; |
| dev_dbg(&pdev->dev, "could not map I/O memory\n"); |
| goto err_free; |
| } |
| |
| spin_lock_init(&wdt->io_lock); |
| wdt->boot_status = at32_wdt_get_status(); |
| |
| /* Work-around for watchdog silicon errata. */ |
| if (wdt->boot_status & WDIOF_CARDRESET) { |
| dev_info(&pdev->dev, "CPU must be reset with external " |
| "reset or POR due to silicon errata.\n"); |
| ret = -EIO; |
| goto err_iounmap; |
| } else { |
| wdt->users = 0; |
| } |
| wdt->miscdev.minor = WATCHDOG_MINOR; |
| wdt->miscdev.name = "watchdog"; |
| wdt->miscdev.fops = &at32_wdt_fops; |
| |
| if (at32_wdt_settimeout(timeout)) { |
| at32_wdt_settimeout(TIMEOUT_DEFAULT); |
| dev_dbg(&pdev->dev, |
| "default timeout invalid, set to %d sec.\n", |
| TIMEOUT_DEFAULT); |
| } |
| |
| ret = misc_register(&wdt->miscdev); |
| if (ret) { |
| dev_dbg(&pdev->dev, "failed to register wdt miscdev\n"); |
| goto err_iounmap; |
| } |
| |
| platform_set_drvdata(pdev, wdt); |
| wdt->miscdev.parent = &pdev->dev; |
| dev_info(&pdev->dev, |
| "AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n", |
| wdt->regs, wdt->timeout, nowayout); |
| |
| return 0; |
| |
| err_iounmap: |
| iounmap(wdt->regs); |
| err_free: |
| kfree(wdt); |
| wdt = NULL; |
| return ret; |
| } |
| |
| static int __exit at32_wdt_remove(struct platform_device *pdev) |
| { |
| if (wdt && platform_get_drvdata(pdev) == wdt) { |
| /* Stop the timer before we leave */ |
| if (!nowayout) |
| at32_wdt_stop(); |
| |
| misc_deregister(&wdt->miscdev); |
| iounmap(wdt->regs); |
| kfree(wdt); |
| wdt = NULL; |
| platform_set_drvdata(pdev, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static void at32_wdt_shutdown(struct platform_device *pdev) |
| { |
| at32_wdt_stop(); |
| } |
| |
| #ifdef CONFIG_PM |
| static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message) |
| { |
| at32_wdt_stop(); |
| return 0; |
| } |
| |
| static int at32_wdt_resume(struct platform_device *pdev) |
| { |
| if (wdt->users) |
| at32_wdt_start(); |
| return 0; |
| } |
| #else |
| #define at32_wdt_suspend NULL |
| #define at32_wdt_resume NULL |
| #endif |
| |
| static struct platform_driver at32_wdt_driver = { |
| .remove = __exit_p(at32_wdt_remove), |
| .suspend = at32_wdt_suspend, |
| .resume = at32_wdt_resume, |
| .driver = { |
| .name = "at32_wdt", |
| .owner = THIS_MODULE, |
| }, |
| .shutdown = at32_wdt_shutdown, |
| }; |
| |
| static int __init at32_wdt_init(void) |
| { |
| return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe); |
| } |
| module_init(at32_wdt_init); |
| |
| static void __exit at32_wdt_exit(void) |
| { |
| platform_driver_unregister(&at32_wdt_driver); |
| } |
| module_exit(at32_wdt_exit); |
| |
| MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); |
| MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |