bna: remove superfluous parentheses
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
index 16090fd..7e17451 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
@@ -84,7 +84,7 @@
(prop) |= BFI_ADAPTER_PROTO; \
(gpio) &= ~CB_GPIO_PROTO; \
} \
- switch ((gpio)) { \
+ switch (gpio) { \
case CB_GPIO_TTV: \
(prop) |= BFI_ADAPTER_TTV; \
case CB_GPIO_DFLY: \
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index b009fd7..b7a0f78 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1304,7 +1304,7 @@
for (i = 0; i < (sizeof(struct bfi_ioc_image_hdr) / sizeof(u32));
i++) {
fwsig[i] =
- swab32(readl((loff) + (ioc->ioc_regs.smem_page_start)));
+ swab32(readl(loff + ioc->ioc_regs.smem_page_start));
loff += sizeof(u32);
}
}
@@ -1675,7 +1675,7 @@
{
int locked;
- locked = readl((bar + FLASH_SEM_LOCK_REG));
+ locked = readl(bar + FLASH_SEM_LOCK_REG);
return !locked;
}
@@ -2049,8 +2049,8 @@
/**
* write smem
*/
- writel((swab32(fwimg[BFA_IOC_FLASH_OFFSET_IN_CHUNK(i)])),
- ((ioc->ioc_regs.smem_page_start) + (loff)));
+ writel(swab32(fwimg[BFA_IOC_FLASH_OFFSET_IN_CHUNK(i)]),
+ ioc->ioc_regs.smem_page_start + loff);
loff += sizeof(u32);
@@ -2213,7 +2213,7 @@
len = sz/sizeof(u32);
for (i = 0; i < len; i++) {
- r32 = swab32(readl((loff) + (ioc->ioc_regs.smem_page_start)));
+ r32 = swab32(readl(loff + ioc->ioc_regs.smem_page_start));
buf[i] = be32_to_cpu(r32);
loff += sizeof(u32);
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
index 8d5c239..74e5ed5 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
@@ -535,7 +535,7 @@
{
u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
- writel((r32 | bfa_ioc_ct_sync_pos(ioc)), ioc->ioc_regs.ioc_fail_sync);
+ writel(r32 | bfa_ioc_ct_sync_pos(ioc), ioc->ioc_regs.ioc_fail_sync);
}
static bool
@@ -666,7 +666,7 @@
writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P0));
writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P1));
}
- r32 = readl((rb + PSS_CTL_REG));
+ r32 = readl(rb + PSS_CTL_REG);
r32 &= ~__PSS_LMEM_RESET;
writel(r32, (rb + PSS_CTL_REG));
udelay(1000);
@@ -677,7 +677,7 @@
writel(__EDRAM_BISTR_START, (rb + MBIST_CTL_REG));
udelay(1000);
- r32 = readl((rb + MBIST_STAT_REG));
+ r32 = readl(rb + MBIST_STAT_REG);
writel(0, (rb + MBIST_CTL_REG));
return BFA_STATUS_OK;
}
@@ -690,7 +690,7 @@
/*
* put s_clk PLL and PLL FSM in reset
*/
- r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
r32 &= ~(__APP_PLL_SCLK_ENABLE | __APP_PLL_SCLK_LRESETN);
r32 |= (__APP_PLL_SCLK_ENARST | __APP_PLL_SCLK_BYPASS |
__APP_PLL_SCLK_LOGIC_SOFT_RESET);
@@ -700,28 +700,28 @@
* Ignore mode and program for the max clock (which is FC16)
* Firmware/NFC will do the PLL init appropriately
*/
- r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2);
writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
/*
* while doing PLL init dont clock gate ethernet subsystem
*/
- r32 = readl((rb + CT2_CHIP_MISC_PRG));
- writel((r32 | __ETH_CLK_ENABLE_PORT0),
- (rb + CT2_CHIP_MISC_PRG));
+ r32 = readl(rb + CT2_CHIP_MISC_PRG);
+ writel(r32 | __ETH_CLK_ENABLE_PORT0,
+ rb + CT2_CHIP_MISC_PRG);
- r32 = readl((rb + CT2_PCIE_MISC_REG));
- writel((r32 | __ETH_CLK_ENABLE_PORT1),
- (rb + CT2_PCIE_MISC_REG));
+ r32 = readl(rb + CT2_PCIE_MISC_REG);
+ writel(r32 | __ETH_CLK_ENABLE_PORT1,
+ rb + CT2_PCIE_MISC_REG);
/*
* set sclk value
*/
- r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
r32 &= (__P_SCLK_PLL_LOCK | __APP_PLL_SCLK_REFCLK_SEL |
__APP_PLL_SCLK_CLK_DIV2);
- writel(r32 | 0x1061731b, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+ writel(r32 | 0x1061731b, rb + CT2_APP_PLL_SCLK_CTL_REG);
/*
* poll for s_clk lock or delay 1ms
@@ -742,28 +742,28 @@
/*
* put l_clk PLL and PLL FSM in reset
*/
- r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
r32 &= ~(__APP_PLL_LCLK_ENABLE | __APP_PLL_LCLK_LRESETN);
r32 |= (__APP_PLL_LCLK_ENARST | __APP_PLL_LCLK_BYPASS |
__APP_PLL_LCLK_LOGIC_SOFT_RESET);
- writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+ writel(r32, rb + CT2_APP_PLL_LCLK_CTL_REG);
/*
* set LPU speed (set for FC16 which will work for other modes)
*/
- r32 = readl((rb + CT2_CHIP_MISC_PRG));
+ r32 = readl(rb + CT2_CHIP_MISC_PRG);
writel(r32, (rb + CT2_CHIP_MISC_PRG));
/*
* set LPU half speed (set for FC16 which will work for other modes)
*/
- r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
- writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+ writel(r32, rb + CT2_APP_PLL_LCLK_CTL_REG);
/*
* set lclk for mode (set for FC16)
*/
- r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
r32 &= (__P_LCLK_PLL_LOCK | __APP_LPUCLK_HALFSPEED);
r32 |= 0x20c1731b;
writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
@@ -779,14 +779,14 @@
{
u32 r32;
- r32 = readl((rb + PSS_CTL_REG));
+ r32 = readl(rb + PSS_CTL_REG);
r32 &= ~__PSS_LMEM_RESET;
- writel(r32, (rb + PSS_CTL_REG));
+ writel(r32, rb + PSS_CTL_REG);
udelay(1000);
- writel(__EDRAM_BISTR_START, (rb + CT2_MBIST_CTL_REG));
+ writel(__EDRAM_BISTR_START, rb + CT2_MBIST_CTL_REG);
udelay(1000);
- writel(0, (rb + CT2_MBIST_CTL_REG));
+ writel(0, rb + CT2_MBIST_CTL_REG);
}
static void
@@ -800,22 +800,22 @@
/*
* release soft reset on s_clk & l_clk
*/
- r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
- writel((r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET),
- (rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
+ writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+ rb + CT2_APP_PLL_SCLK_CTL_REG);
/*
* release soft reset on s_clk & l_clk
*/
- r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
- writel((r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET),
- (rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+ writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+ rb + CT2_APP_PLL_LCLK_CTL_REG);
/* put port0, port1 MAC & AHB in reset */
- writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
- (rb + CT2_CSI_MAC_CONTROL_REG(0)));
- writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
- (rb + CT2_CSI_MAC_CONTROL_REG(1)));
+ writel(__CSI_MAC_RESET | __CSI_MAC_AHB_RESET,
+ rb + CT2_CSI_MAC_CONTROL_REG(0));
+ writel(__CSI_MAC_RESET | __CSI_MAC_AHB_RESET,
+ rb + CT2_CSI_MAC_CONTROL_REG(1));
}
#define CT2_NFC_MAX_DELAY 1000
@@ -860,8 +860,8 @@
nfc_ver = readl(rb + CT2_RSC_GPR15_REG);
- if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) &&
- (nfc_ver >= CT2_NFC_VER_VALID)) {
+ if (wgn == (__A2T_AHB_LOAD | __WGN_READY) &&
+ nfc_ver >= CT2_NFC_VER_VALID) {
if (bfa_ioc_ct2_nfc_halted(rb))
bfa_ioc_ct2_nfc_resume(rb);
writel(__RESET_AND_START_SCLK_LCLK_PLLS,
@@ -898,19 +898,19 @@
bfa_ioc_ct2_lclk_init(rb);
/* release soft reset on s_clk & l_clk */
- r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
rb + CT2_APP_PLL_SCLK_CTL_REG);
- r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
rb + CT2_APP_PLL_LCLK_CTL_REG);
}
/* Announce flash device presence, if flash was corrupted. */
if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
- r32 = readl((rb + PSS_GPIO_OUT_REG));
+ r32 = readl(rb + PSS_GPIO_OUT_REG);
writel(r32 & ~1, rb + PSS_GPIO_OUT_REG);
- r32 = readl((rb + PSS_GPIO_OE_REG));
+ r32 = readl(rb + PSS_GPIO_OE_REG);
writel(r32 | 1, rb + PSS_GPIO_OE_REG);
}
@@ -918,27 +918,27 @@
* Mask the interrupts and clear any
* pending interrupts left by BIOS/EFI
*/
- writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
- writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
+ writel(1, rb + CT2_LPU0_HOSTFN_MBOX0_MSK);
+ writel(1, rb + CT2_LPU1_HOSTFN_MBOX0_MSK);
/* For first time initialization, no need to clear interrupts */
r32 = readl(rb + HOST_SEM5_REG);
if (r32 & 0x1) {
- r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT);
if (r32 == 1) {
- writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
- readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT);
+ readl(rb + CT2_LPU0_HOSTFN_CMD_STAT);
}
- r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
if (r32 == 1) {
- writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
- readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT);
+ readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
}
}
bfa_ioc_ct2_mem_init(rb);
- writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
- writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
+ writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG);
+ writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG);
return BFA_STATUS_OK;
}
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 33f5e55..5d0753c 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -933,7 +933,7 @@
{
struct bna_rxf *rxf = &rx->rxf;
int index = (vlan_id >> BFI_VLAN_WORD_SHIFT);
- int bit = BIT((vlan_id & BFI_VLAN_WORD_MASK));
+ int bit = BIT(vlan_id & BFI_VLAN_WORD_MASK);
int group_id = (vlan_id >> BFI_VLAN_BLOCK_SHIFT);
rxf->vlan_filter_table[index] |= bit;
@@ -948,7 +948,7 @@
{
struct bna_rxf *rxf = &rx->rxf;
int index = (vlan_id >> BFI_VLAN_WORD_SHIFT);
- int bit = BIT((vlan_id & BFI_VLAN_WORD_MASK));
+ int bit = BIT(vlan_id & BFI_VLAN_WORD_MASK);
int group_id = (vlan_id >> BFI_VLAN_BLOCK_SHIFT);
rxf->vlan_filter_table[index] &= ~bit;
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 85c1470..0612b19 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -309,7 +309,7 @@
}
}
- BUG_ON(((PAGE_SIZE << order) % unmap_q->map_size));
+ BUG_ON((PAGE_SIZE << order) % unmap_q->map_size);
return 0;
}
@@ -757,7 +757,7 @@
struct bna_ccb *ccb = (struct bna_ccb *)data;
if (ccb) {
- ((struct bnad_rx_ctrl *)(ccb->ctrl))->rx_intr_ctr++;
+ ((struct bnad_rx_ctrl *)ccb->ctrl)->rx_intr_ctr++;
bnad_netif_rx_schedule_poll(ccb->bnad, ccb);
}
@@ -3677,13 +3677,13 @@
/* Set up timers */
setup_timer(&bnad->bna.ioceth.ioc.ioc_timer, bnad_ioc_timeout,
- ((unsigned long)bnad));
+ (unsigned long)bnad);
setup_timer(&bnad->bna.ioceth.ioc.hb_timer, bnad_ioc_hb_check,
- ((unsigned long)bnad));
+ (unsigned long)bnad);
setup_timer(&bnad->bna.ioceth.ioc.iocpf_timer, bnad_iocpf_timeout,
- ((unsigned long)bnad));
+ (unsigned long)bnad);
setup_timer(&bnad->bna.ioceth.ioc.sem_timer, bnad_iocpf_sem_timeout,
- ((unsigned long)bnad));
+ (unsigned long)bnad);
/*
* Start the chip
diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
index c0fd737..8fc246e 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
@@ -268,15 +268,15 @@
area = (offset >> 15) & 0x7;
if (area == 0) {
/* PCIe core register */
- if ((offset + (len<<2)) > 0x8000) /* 8k dwords or 32KB */
+ if (offset + (len << 2) > 0x8000) /* 8k dwords or 32KB */
return BFA_STATUS_EINVAL;
} else if (area == 0x1) {
/* CB 32 KB memory page */
- if ((offset + (len<<2)) > 0x10000) /* 8k dwords or 32KB */
+ if (offset + (len << 2) > 0x10000) /* 8k dwords or 32KB */
return BFA_STATUS_EINVAL;
} else {
/* CB register space 64KB */
- if ((offset + (len<<2)) > BFA_REG_ADDRMSK(ioc))
+ if (offset + (len << 2) > BFA_REG_ADDRMSK(ioc))
return BFA_STATUS_EINVAL;
}
return BFA_STATUS_OK;