| # |
| # Makefile for the linux kernel. |
| # |
| |
| # Common support (must be linked before board specific support) |
| obj-y += clock.o devices.o generic.o irq.o dma.o \ |
| time.o gpio.o reset.o |
| obj-$(CONFIG_PM) += pm.o sleep.o standby.o |
| obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o |
| |
| # Generic drivers that other drivers may depend upon |
| obj-$(CONFIG_PXA_SSP) += ssp.o |
| obj-$(CONFIG_PXA_PWM) += pwm.o |
| |
| # SoC-specific code |
| obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o |
| obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o |
| obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o |
| obj-$(CONFIG_CPU_PXA300) += pxa300.o |
| obj-$(CONFIG_CPU_PXA320) += pxa320.o |
| obj-$(CONFIG_CPU_PXA930) += pxa930.o |
| |
| # Specific board support |
| obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o |
| obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o |
| obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o |
| obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o |
| obj-$(CONFIG_ARCH_PXA_IDP) += idp.o |
| obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o |
| obj-$(CONFIG_MACH_COLIBRI) += colibri.o |
| obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o |
| obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o |
| obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o |
| obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o |
| obj-$(CONFIG_MACH_PCM027) += pcm027.o |
| obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o |
| obj-$(CONFIG_MACH_TOSA) += tosa.o |
| obj-$(CONFIG_MACH_EM_X270) += em-x270.o |
| obj-$(CONFIG_MACH_MAGICIAN) += magician.o |
| obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o |
| obj-$(CONFIG_MACH_E330) += e330.o |
| obj-$(CONFIG_MACH_E350) += e350.o |
| obj-$(CONFIG_MACH_E740) += e740.o |
| obj-$(CONFIG_MACH_E750) += e750.o |
| obj-$(CONFIG_MACH_E400) += e400.o |
| obj-$(CONFIG_MACH_E800) += e800.o |
| obj-$(CONFIG_MACH_PALMTX) += palmtx.o |
| |
| ifeq ($(CONFIG_MACH_ZYLONITE),y) |
| obj-y += zylonite.o |
| obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o |
| obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o |
| endif |
| obj-$(CONFIG_MACH_LITTLETON) += littleton.o |
| obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o |
| obj-$(CONFIG_MACH_SAAR) += saar.o |
| |
| obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o |
| obj-$(CONFIG_PXA_EZX) += ezx.o |
| |
| # Support for blinky lights |
| led-y := leds.o |
| led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o |
| led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o |
| led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o |
| led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o |
| |
| obj-$(CONFIG_LEDS) += $(led-y) |
| |
| ifeq ($(CONFIG_PCI),y) |
| obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o |
| endif |
| |
| obj-$(CONFIG_TOSA_BT) += tosa-bt.o |