Merge tag 'renesas-dt3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC DT Updates for v4.1" from Simon
Horman:
* Add DMA sound support to r8a7791 and r8a7790 SoCs
* tag 'renesas-dt3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7791: sound enables Audio DMAC entry on DTSI
ARM: shmobile: r8a7790: sound enables Audio DMAC entry on DTSI
ARM: shmobile: r8a7791: enable Audio DMAC peri peri via sound driver
ARM: shmobile: r8a7790: enable Audio DMAC peri peri via sound driver
ARM: shmobile: r8a7791: add reg-names for sound
ARM: shmobile: r8a7790: add reg-names for sound
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt
index 71daa35..eb102fb 100644
--- a/Documentation/cgroups/unified-hierarchy.txt
+++ b/Documentation/cgroups/unified-hierarchy.txt
@@ -404,8 +404,8 @@
be understood as an underflow into the highest possible value, -2 or
-10M etc. do not work, so it's not consistent.
- memory.low, memory.high, and memory.max will use the string
- "infinity" to indicate and set the highest possible value.
+ memory.low, memory.high, and memory.max will use the string "max" to
+ indicate and set the highest possible value.
5. Planned Changes
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6809e4e..60d4a1e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -22,3 +22,7 @@
- compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
or
- compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
+
+- ChipSPARK PopMetal-RK3288 board:
+ Required root node properties:
+ - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index f90e294..a4d8697 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -26,6 +26,11 @@
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stop working while it is in idle state, which is probably
+ not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index 1b528b2..fcf4d50 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -5,8 +5,8 @@
dlmfs is built with OCFS2 as it requires most of its infrastructure.
-Project web page: http://oss.oracle.com/projects/ocfs2
-Tools web page: http://oss.oracle.com/projects/ocfs2-tools
+Project web page: http://ocfs2.wiki.kernel.org
+Tools web page: https://github.com/markfasheh/ocfs2-tools
OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 28f8c08..4c49e54 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -8,8 +8,8 @@
You'll want to install the ocfs2-tools package in order to at least
get "mount.ocfs2" and "ocfs2_hb_ctl".
-Project web page: http://oss.oracle.com/projects/ocfs2
-Tools web page: http://oss.oracle.com/projects/ocfs2-tools
+Project web page: http://ocfs2.wiki.kernel.org
+Tools git tree: https://github.com/markfasheh/ocfs2-tools
OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8c..eaf9996 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7213,8 +7213,7 @@
M: Mark Fasheh <mfasheh@suse.com>
M: Joel Becker <jlbec@evilplan.org>
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
-W: http://oss.oracle.com/projects/ocfs2/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
+W: http://ocfs2.wiki.kernel.org
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
diff --git a/Makefile b/Makefile
index 9fab639..e6a9b1b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 0
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..a1f1aa7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,5 +1,7 @@
ifeq ($(CONFIG_OF),y)
+dtb-$(CONFIG_ARCH_ALPINE) += \
+ alpine-db.dtb
dtb-$(CONFIG_MACH_ASM9260) += \
alphascale-asm9260-devkit.dtb
# Keep at91 dtb files sorted alphabetically for each SoC
@@ -42,6 +44,7 @@
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
+ at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += \
atlas6-evb.dtb
@@ -59,13 +62,15 @@
bcm4708-netgear-r6300-v2.dtb \
bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb
+ bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
bcm911360_entphn.dtb \
bcm911360k.dtb \
- bcm958300k.dtb
+ bcm958300k.dtb \
+ bcm958305k.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
bcm21664-garnet.dtb
@@ -199,6 +204,8 @@
ea3250.dtb phy3250.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
+dtb-$(CONFIG_MACH_MESON8) += \
+ meson8-minix-neo-x8.dtb
dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
@@ -624,11 +631,14 @@
armada-388-db.dtb \
armada-388-gp.dtb \
armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+ armada-398-db.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
armada-xp-lenovo-ix4-300d.dtb \
+ armada-xp-linksys-mamba.dtb \
armada-xp-matrix.dtb \
armada-xp-netgear-rn2120.dtb \
armada-xp-openblocks-ax3-4.dtb \
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/alpine-db.dts
new file mode 100644
index 0000000..dfb5a08
--- /dev/null
+++ b/arch/arm/boot/dts/alpine-db.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+
+#include "alpine.dtsi"
+
+/ {
+ model = "Annapurna Labs Alpine Dev Board";
+ /* no need for anything outside SOC */
+};
+
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
new file mode 100644
index 0000000..519f58c
--- /dev/null
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+ /* SOC compatibility */
+ compatible = "al,alpine";
+
+ /* CPU Configuration */
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "al,alpine-smp";
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled by loader */
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ clock-frequency = <0>; /* Filled by loader */
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ clock-frequency = <0>; /* Filled by loader */
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ clock-frequency = <0>; /* Filled by loader */
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ arch-timer {
+ compatible = "arm,cortex-a15-timer",
+ "arm,armv7-timer";
+ interrupts =
+ <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <0>; /* Filled by loader */
+ };
+
+ /* Interrupt Controller */
+ gic: gic@fb001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xfb001000 0x0 0x1000>,
+ <0x0 0xfb002000 0x0 0x2000>,
+ <0x0 0xfb004000 0x0 0x1000>,
+ <0x0 0xfb006000 0x0 0x2000>;
+ interrupts =
+ <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ /* CPU Resume registers */
+ cpu-resume@fbff5ec0 {
+ compatible = "al,alpine-cpu-resume";
+ reg = <0x0 0xfbff5ec0 0x0 0x30>;
+ };
+
+ /* North Bridge Service Registers */
+ sysfabric-service@fb070000 {
+ compatible = "al,alpine-sysfabric-service", "syscon";
+ reg = <0x0 0xfb070000 0x0 0x10000>;
+ };
+
+ /* Performance Monitor Unit */
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ uart0:uart@fd883000 {
+ compatible = "ns16550a";
+ reg = <0x0 0xfd883000 0x0 0x1000>;
+ clock-frequency = <0>; /* Filled by loader */
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1:uart@0xfd884000 {
+ compatible = "ns16550a";
+ reg = <0x0 0xfd884000 0x0 0x1000>;
+ clock-frequency = <0>; /* Filled by loader */
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 6cc25ed..2c6248d 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -195,6 +195,7 @@
&usb0 {
status = "okay";
+ dr_mode = "peripheral";
};
&usb1 {
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index f9a17e2..0198f5a 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -133,20 +133,6 @@
>;
};
- i2c1_pins_default: i2c1_pins_default {
- pinctrl-single,pins = <
- 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
- >;
- };
-
- i2c1_pins_sleep: i2c1_pins_sleep {
- pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
- >;
- };
-
mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
@@ -254,7 +240,7 @@
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c0_pins_default>;
- pinctrl-1 = <&i2c0_pins_default>;
+ pinctrl-1 = <&i2c0_pins_sleep>;
clock-frequency = <400000>;
at24@50 {
@@ -262,17 +248,10 @@
pagesize = <64>;
reg = <0x50>;
};
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_default>;
- pinctrl-1 = <&i2c1_pins_default>;
- clock-frequency = <400000>;
tps: tps62362@60 {
compatible = "ti,tps62362";
+ reg = <0x60>;
regulator-name = "VDD_MPU";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1330000>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 03750af..6463f9e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -549,14 +549,6 @@
pinctrl-0 = <&usb1_pins>;
};
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
- extcon = <&extcon_usb2>;
-};
-
&usb2 {
dr_mode = "peripheral";
};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index e993c46..485ecf8 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -55,7 +55,7 @@
compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index b10ceb4..0f40d5d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -51,7 +51,7 @@
compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 3f8cc38..a312078 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -53,7 +53,7 @@
compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 99eb8a0..00540f2 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -53,7 +53,7 @@
compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 6ae36a3..19475e6 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -64,7 +64,7 @@
compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 59f74e6..b42b767 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -67,8 +67,7 @@
"marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 8a322ad..7b3393e 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -59,8 +59,8 @@
compatible = "marvell,armada-370-xp";
aliases {
- eth0 = ð0;
- eth1 = ð1;
+ serial0 = &uart0;
+ serial1 = &uart1;
};
cpus {
@@ -223,7 +223,7 @@
<0x20250 0x8>;
};
- mpic: interrupt-controller@20000 {
+ mpic: interrupt-controller@20a00 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 27397f1..50f259b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -232,7 +232,7 @@
reg = <0x18330 0x4>;
};
- interrupt-controller@20000 {
+ interrupt-controller@20a00 {
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 0440891..4eabc9c 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -55,7 +55,7 @@
compatible = "marvell,a375-db", "marvell,armada375";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index ba3c57e..c6fedf2 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -60,8 +60,8 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
- ethernet0 = ð0;
- ethernet1 = ð1;
+ serial0 = &uart0;
+ serial1 = &uart1;
};
clocks {
@@ -276,7 +276,7 @@
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
@@ -286,7 +286,7 @@
status = "disabled";
};
- serial@12100 {
+ uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
@@ -394,7 +394,7 @@
reg = <0x20000 0x100>, <0x20180 0x20>;
};
- mpic: interrupt-controller@20000 {
+ mpic: interrupt-controller@20a00 {
compatible = "marvell,mpic";
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 57b9119..d6b0f7d 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -49,8 +49,7 @@
compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart1;
+ stdout-path = "serial1:115200n8";
};
memory {
@@ -150,6 +149,19 @@
phy = <&phy0>;
phy-mode = "rgmii-id";
};
+
+ nfc: flash@d0000 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ };
};
pcie-controller {
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 16512ef..51d1623 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -54,7 +54,7 @@
"marvell,armada385", "marvell,armada380";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -99,7 +99,7 @@
phy-mode = "rgmii-id";
};
- usb@50000 {
+ usb@58000 {
status = "ok";
};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 590b383..78514ab 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -48,8 +48,7 @@
compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -135,7 +134,7 @@
};
/* CON4 */
- usb@50000 {
+ usb@58000 {
vcc-supply = <®_usb2_0_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index d99baac..1dc6e23 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -55,7 +55,7 @@
"marvell,armada385","marvell,armada380";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -85,6 +85,16 @@
clock-frequency = <100000>;
};
+ sdhci@d8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ broken-cd;
+ no-1-8-v;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ };
+
serial@12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 1dff30a..1a2dc37 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -59,9 +59,8 @@
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
- ethernet0 = ð0;
- ethernet1 = ð1;
- ethernet2 = ð2;
+ serial0 = &uart0;
+ serial1 = &uart1;
};
soc {
@@ -216,7 +215,7 @@
status = "disabled";
};
- serial@12100 {
+ uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
@@ -368,7 +367,7 @@
reg = <0x20000 0x100>, <0x20180 0x20>;
};
- mpic: interrupt-controller@20000 {
+ mpic: interrupt-controller@20a00 {
compatible = "marvell,mpic";
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
#interrupt-cells = <1>;
@@ -435,7 +434,7 @@
status = "disabled";
};
- usb@50000 {
+ usb@58000 {
compatible = "marvell,orion-ehci";
reg = <0x58000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -548,8 +547,11 @@
sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
- reg = <0xd8000 0x1000>, <0xdc000 0x100>;
- interrupts = <0 25 0x4>;
+ reg-names = "sdhci", "mbus", "conf-sdio3";
+ reg = <0xd8000 0x1000>,
+ <0xdc000 0x100>,
+ <0x18454 0x4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 17>;
mrvl,clk-delay-cycles = <0x1F>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
new file mode 100644
index 0000000..094e39c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada 390 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+ soc {
+ internal-regs {
+ pinctrl@18000 {
+ compatible = "marvell,mv88f6920-pinctrl";
+ reg = <0x18000 0x20>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
new file mode 100644
index 0000000..bbf8375
--- /dev/null
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -0,0 +1,153 @@
+/*
+ * Device Tree Include file for Marvell Armada 398 Development Board
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-398.dtsi"
+
+/ {
+ model = "Marvell Armada 398 Development Board";
+ compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10680 {
+ status = "okay";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "n25q128a13";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x400000 0x1000000>;
+ };
+ };
+ };
+
+ i2c@11000 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@12100 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ flash@d0000 {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ status = "okay";
+ };
+
+ pcie@3,0 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
new file mode 100644
index 0000000..fdc2591
--- /dev/null
+++ b/arch/arm/boot/dts/armada-398.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Device Tree Include file for Marvell Armada 398 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+ compatible = "marvell,armada398", "marvell,armada390";
+
+ soc {
+ internal-regs {
+ pinctrl@18000 {
+ compatible = "marvell,mv88f6928-pinctrl";
+ reg = <0x18000 0x20>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
new file mode 100644
index 0000000..0e85fc1
--- /dev/null
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -0,0 +1,508 @@
+/*
+ * Device Tree Include file for Marvell Armada 39x family of SoCs.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+ model = "Marvell Armada 39x family SoC";
+ compatible = "marvell,armada390";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,armada-390-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ interrupt-parent = <&gic>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ L2: cache-controller@8000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x8000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ scu@c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xc000 0x100>;
+ };
+
+ timer@c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xc600 0x20>;
+ interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+ clocks = <&coreclk 2>;
+ };
+
+ gic: interrupt-controller@d000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ interrupt-controller;
+ reg = <0xd000 0x1000>,
+ <0xc100 0x100>;
+ };
+
+ spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ spi1: spi@10680 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11200 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11200 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11300 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11300 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ uart0: serial@12000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ uart1: serial@12100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ uart2: serial@12200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12200 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ uart3: serial@12300 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12300 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ pinctrl@18000 {
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c0";
+ };
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "ua0";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp19", "mpp20";
+ marvell,function = "ua1";
+ };
+
+ spi1_pins: spi1-pins {
+ marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+ marvell,function = "spi1";
+ };
+
+ nand_pins: nand-pins {
+ marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
+ "mpp38", "mpp28", "mpp40", "mpp42",
+ "mpp35", "mpp36", "mpp25", "mpp30",
+ "mpp32";
+ marvell,function = "dev";
+ };
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-390-system-controller",
+ "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
+ gateclk: clock-gating-control@18220 {
+ compatible = "marvell,armada-390-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+ coreclk: mvebu-sar@18600 {
+ compatible = "marvell,armada-390-core-clock";
+ reg = <0x18600 0x04>;
+ #clock-cells = <1>;
+ };
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+ };
+
+ mpic: interrupt-controller@20a00 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@20300 {
+ compatible = "marvell,armada-380-timer",
+ "marvell,armada-xp-timer";
+ reg = <0x20300 0x30>, <0x21040 0x30>;
+ interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpic 5>,
+ <&mpic 6>;
+ clocks = <&coreclk 2>, <&coreclk 5>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x10>;
+ };
+
+ pmsu@22000 {
+ compatible = "marvell,armada-390-pmsu",
+ "marvell,armada-380-pmsu";
+ reg = <0x22000 0x1000>;
+ };
+
+ xor@60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60a00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ xor@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gateclk 28>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ flash@d0000 {
+ compatible = "marvell,armada370-nand";
+ reg = <0xd0000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coredivclk 0>;
+ status = "disabled";
+ };
+
+ sdhci@d8000 {
+ compatible = "marvell,armada-380-sdhci";
+ reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 17>;
+ mrvl,clk-delay-cycles = <0x1F>;
+ status = "disabled";
+ };
+
+ coredivclk: clock@e4250 {
+ compatible = "marvell,armada-390-corediv-clock",
+ "marvell,armada-380-corediv-clock";
+ reg = <0xe4250 0xc>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+ 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;
+
+ /*
+ * This port can be either x4 or x1. When
+ * configured in x4 by the bootloader, then
+ * pcie@4,0 is not available.
+ */
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ /*
+ * x1 port only available when pcie@1,0 is
+ * configured as a x1 port
+ */
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+ };
+ };
+
+ clocks {
+ /* 2 GHz fixed main PLL */
+ mainpll: mainpll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2000000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index c1fbab2..dfd782b 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -59,7 +59,7 @@
compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 48bdafe..1037824 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -64,7 +64,7 @@
compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 206aebb..565227e 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -65,7 +65,7 @@
compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 5fb3c8b..06a6a6c 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -54,8 +54,7 @@
"marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
new file mode 100644
index 0000000..a2cf215
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -0,0 +1,393 @@
+/*
+ * Device Tree file for the Linksys WRT1900AC (Mamba).
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on armada-xp-axpwifiap.dts:
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Linksys WRT1900AC";
+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Etron EJ168 USB 3.0 controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* First mini-PCIe port */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie@3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+
+ /* J10: VCC, NC, RX, NC, TX, GND */
+ serial@12000 {
+ status = "okay";
+ };
+
+ sata@a0000 {
+ nr-ports = <1>;
+ status = "okay";
+ };
+
+ ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* USB part of the eSATA/USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ tmp421@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+
+ tlc59116@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <2>;
+ compatible = "ti,tlc59116";
+ reg = <0x68>;
+
+ wan_amber@0 {
+ label = "mamba:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "mamba:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "mamba:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "mamba:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ esata@4 {
+ label = "mamba:white:esata";
+ reg = <0x4>;
+ };
+
+ usb2@5 {
+ label = "mamba:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "mamba:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "mamba:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "mamba:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "mamba:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x100000 0x40000>; /* 256KB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x140000 0x40000>; /* 256KB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MB */
+ };
+
+ partition@d00000 {
+ label = "rootfs1";
+ reg = <0xd00000 0x2500000>; /* 37MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MB */
+ };
+
+ partition@3500000 {
+ label = "rootfs2";
+ reg = <0x3500000 0x2500000>; /* 37MB */
+ };
+
+ /*
+ * 38MB, last MB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x180000 0x780000>; /* 7.5MB */
+ };
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "everspin,mr25h256";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <40000000>;
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&keys_pin>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@2 {
+ label = "Factory Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&power_led_pin>;
+ pinctrl-names = "default";
+
+ power {
+ label = "mamba:white:power";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ gpio_fan {
+ /* SUNON HA4010V4-0000-C99 */
+ compatible = "gpio-fan";
+ gpios = <&gpio0 24 0>;
+
+ gpio-fan,speed-map = <0 0
+ 4500 1>;
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð0>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "internet";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
+};
+
+&pinctrl {
+
+ keys_pin: keys-pin {
+ marvell,pins = "mpp32", "mpp33";
+ marvell,function = "gpio";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ gpio_fan_pin: gpio-fan-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 56f958e..f894bc8 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -52,7 +52,7 @@
compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 4a7cbed..8479fdc 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -57,7 +57,6 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
- eth3 = ð3;
};
cpus {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 36ce63a..661d54c 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -57,7 +57,6 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
- eth3 = ð3;
};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 99cb9a8..1516fc2 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -53,7 +53,7 @@
compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0c76d9f..e3b08fb 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -54,7 +54,7 @@
compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index e9fb225..6063428 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -67,8 +67,7 @@
"marvell,armadaxp", "marvell,armada-370-xp";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 8291723..ff47345 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -57,7 +57,8 @@
compatible = "marvell,armadaxp", "marvell,armada-370-xp";
aliases {
- eth2 = ð2;
+ serial2 = &uart2;
+ serial3 = &uart3;
};
soc {
@@ -153,7 +154,7 @@
clocks = <&coreclk 1>;
};
- interrupt-controller@20000 {
+ interrupt-controller@20a00 {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index fec1fca..225c63d 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -188,6 +188,11 @@
<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
};
+ pinctrl_key_gpio: key_gpio_0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -276,6 +281,9 @@
gpio_keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio>;
+
bp3 {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
new file mode 100644
index 0000000..c740e1a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -0,0 +1,241 @@
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ * Copyright (C) 2015 Atmel,
+ * 2015 Josh Wu <josh.wu@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+ model = "Atmel SAMA5D4 Xplained";
+ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f8010000 {
+ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+ status = "okay";
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ i2c0: i2c@f8014000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f8020000 {
+ phy-mode = "rmii";
+ status = "okay";
+
+ phy0: ethernet-phy@1 {
+ interrupt-parent = <&pioE>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ reg = <1>;
+ };
+ };
+
+ mmc1: mmc@fc000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 3 0>;
+ };
+ };
+
+ usart3: serial@fc00c000 {
+ status = "okay";
+ };
+
+ usart4: serial@fc010000 {
+ status = "okay";
+ };
+
+ adc0: adc@fc034000 {
+ atmel,adc-vref = <3300>;
+ status = "okay";
+ };
+
+ watchdog@fc068640 {
+ status = "okay";
+ };
+
+ pinctrl@fc06a000 {
+ board {
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+ };
+ pinctrl_key_gpio: key_gpio_0 {
+ atmel,pins =
+ <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+ };
+
+ usb0: gadget@00400000 {
+ atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00500000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 11 GPIO_ACTIVE_HIGH
+ &pioE 14 GPIO_ACTIVE_HIGH
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00600000 {
+ status = "okay";
+ };
+
+ nand0: nand@80000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ atmel,has-pmecc;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio>;
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ d8 {
+ label = "d8";
+ gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ d10 {
+ label = "d10";
+ gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 9198b71..89ef4a5 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -115,6 +115,10 @@
};
};
+ ssc0: ssc@f8008000 {
+ status = "okay";
+ };
+
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
@@ -127,6 +131,13 @@
i2c0: i2c@f8014000 {
status = "okay";
+
+ wm8904: codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&pck2>;
+ clock-names = "mclk";
+ };
};
macb0: ethernet@f8020000 {
@@ -171,6 +182,10 @@
atmel,pins =
<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
+ pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+ atmel,pins =
+ <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
@@ -244,8 +259,6 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
@@ -257,4 +270,42 @@
gpio-key,wakeup;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ d8 {
+ label = "d8";
+ /* PE28, conflicts with usart4 rts pin */
+ gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+ };
+
+ d9 {
+ label = "d9";
+ gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ d10 {
+ label = "d10";
+ gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "atmel,asoc-wm8904";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+ atmel,model = "wm8904 @ SAMA5D4EK";
+ atmel,audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN1L", "Line In Jack",
+ "IN1R", "Line In Jack";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8904>;
+ };
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index fff0ee6..ac2c5dd 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -494,12 +494,12 @@
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
+ <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
- <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
+ <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
@@ -976,7 +976,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 1f67bb4..088219d 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -69,7 +69,7 @@
sram1: sram@00500000 {
compatible = "mmio-sram";
- reg = <0x00300000 0x4000>;
+ reg = <0x00500000 0x4000>;
};
ahb {
@@ -905,7 +905,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index 17b8799..a7da0dd 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -7,6 +7,7 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_isi.dtsi"
#include "at91sam9x5_usart3.dtsi"
#include "at91sam9x5_macb0.dtsi"
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 1e4c49c..707fd4e 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -16,10 +16,28 @@
ahb {
apb {
+ spi0: spi@f0000000 {
+ status = "disabled";
+ };
+
+ mmc1: mmc@f000c000 {
+ status = "disabled";
+ };
+
+ i2c0: i2c@f8010000 {
+ ov2640: camera@0x30 {
+ status = "okay";
+ };
+ };
+
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
};
+
+ isi: isi@f8048000 {
+ status = "okay";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index ee80aa9..1198931 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1116,7 +1116,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index c2666a7..9648430 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -894,7 +894,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
@@ -913,6 +912,15 @@
clocks = <&pwm_clk>;
status = "disabled";
};
+
+ usb1: gadget@f803c000 {
+ compatible = "atmel,at91sam9260-udc";
+ reg = <0xf803c000 0x4000>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udphs_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 9575c0d..6123109 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -108,6 +108,13 @@
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
+
+ usb1 {
+ pinctrl_usb1_vbus_sense: usb1_vbus_sense {
+ atmel,pins =
+ <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio usb vbus sense, no pull up and deglitch */
+ };
+ };
};
spi0: spi@f0000000 {
@@ -120,6 +127,13 @@
};
};
+ usb1: gadget@f803c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
+ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
watchdog@fffffe40 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 818dabd..e77c9bb 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1130,7 +1130,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
index 98bc877..8fc45ca 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -13,6 +13,37 @@
/ {
ahb {
apb {
+ pinctrl@fffff400 {
+ isi {
+ pinctrl_isi_data_0_7: isi-0-data-0-7 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D0, conflicts with LCDDAT0 */
+ AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D1, conflicts with LCDDAT1 */
+ AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D2, conflicts with LCDDAT2 */
+ AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D3, conflicts with LCDDAT3 */
+ AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D4, conflicts with LCDDAT4 */
+ AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D5, conflicts with LCDDAT5 */
+ AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D6, conflicts with LCDDAT6 */
+ AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D7, conflicts with LCDDAT7 */
+ AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_PCK, conflicts with LCDDAT12 */
+ AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_HSYNC, conflicts with LCDDAT14 */
+ AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_VSYNC, conflicts with LCDDAT13 */
+ };
+
+ pinctrl_isi_data_8_9: isi-0-data-8-9 {
+ atmel,pins =
+ <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D8, conflicts with LCDDAT8 */
+ AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with LCDDAT9 */
+ };
+
+ pinctrl_isi_data_10_11: isi-0-data-10-11 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D10, conflicts with LCDDAT10 */
+ AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with LCDDAT11 */
+ };
+ };
+ };
+
pmc: pmc@fffffc00 {
periphck {
isi_clk: isi_clk {
@@ -21,6 +52,21 @@
};
};
};
+
+ isi: isi@f8048000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf8048000 0x4000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
+ status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index bd16bd3..cc83a37 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -59,6 +59,16 @@
status = "okay";
};
+ isi: isi@f8048000 {
+ status = "disabled";
+ port {
+ isi_0: endpoint@0 {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+
i2c0: i2c@f8010000 {
status = "okay";
@@ -66,9 +76,47 @@
compatible = "wm8731";
reg = <0x1a>;
};
+
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+ clocks = <&pck0>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck0>;
+ assigned-clock-rates = <25000000>;
+ status = "disabled";
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
};
pinctrl@fffff400 {
+ camera_sensor {
+ pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
+ };
+
+ pinctrl_sensor_power: sensor_power-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
mmc0 {
pinctrl_board_mmc0: mmc0-board {
atmel,pins =
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index ff5fb6a..7b52c33 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -54,6 +54,42 @@
/include/ "bcm-cygnus-clock.dtsi"
+ pinctrl: pinctrl@0x0301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x30>,
+ <0x0301d24c 0x2c>;
+ };
+
+ gpio_crmu: gpio@03024800 {
+ compatible = "brcm,cygnus-crmu-gpio";
+ reg = <0x03024800 0x50>,
+ <0x03024008 0x18>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-ccm-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-asiu-gpio";
+ reg = <0x180a5000 0x668>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinmux = <&pinctrl>;
+
+ interrupt-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
@@ -90,6 +126,48 @@
status = "disabled";
};
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index f18c9d9..2ed9e57 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -45,13 +45,13 @@
power0 {
label = "bcm53xx:green:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
+ linux,default-trigger = "default-on";
};
power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
+ linux,default-trigger = "default-off";
};
usb {
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
new file mode 100644
index 0000000..ea26dd3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -0,0 +1,77 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R8000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Netgear R8000 (BCM4709)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power0 {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ power1 {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz-1 {
+ label = "bcm53xx:white:5ghz-1";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index d2ee952..7db4843 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -33,6 +33,7 @@
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "dt-bindings/input/input.h"
/ {
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
@@ -50,4 +51,16 @@
uart3: serial@18023000 {
status = "okay";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hook {
+ label = "HOOK";
+ linux,code = <KEY_O>;
+ gpios = <&gpio_asiu 48 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index f1bb36f..c9eb856 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -47,6 +47,14 @@
bootargs = "console=ttyS0,115200";
};
+ pcie0: pcie@18012000 {
+ status = "okay";
+ };
+
+ pcie1: pcie@18013000 {
+ status = "okay";
+ };
+
uart3: serial@18023000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
new file mode 100644
index 0000000..56b429a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -0,0 +1,53 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus Wireless Audio (BCM958305K)";
+ compatible = "brcm,bcm58305", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 857d028..d3a29c1 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -35,6 +35,18 @@
DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */
>;
};
+
+ usb0_pins: pinmux_usb0_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: pinmux_usb0_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */
+ >;
+ };
};
&i2c1 {
@@ -127,3 +139,16 @@
&mmc1 {
vmmc-supply = <&vmmcsd_fixed>;
};
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ mentor,multipoint = <0>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ mentor,multipoint = <0>;
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index d98d0f7..3c97b5f 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -97,10 +97,31 @@
/* Device Configuration Registers */
scm_conf: syscon@600 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x600 0x110>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x600 0x110>;
+
+ usb_phy0: usb-phy@20 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x20 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+
+ usb_phy1: usb-phy@28 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x28 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
};
scrm_clocks: clocks {
@@ -357,7 +378,10 @@
reg-names = "mc", "control";
interrupts = <18>;
interrupt-names = "mc";
- dr_mode = "otg";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
@@ -366,13 +390,15 @@
usb1: usb@47401800 {
compatible = "ti,musb-am33xx";
- status = "disabled";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
- dr_mode = "otg";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index a5441d5..9ad8295 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -1,5 +1,8 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
@@ -61,7 +64,7 @@
0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
- pcie-port@0 {
+ pcie0: pcie-port@0 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
@@ -79,7 +82,7 @@
interrupt-map = <0 0 0 0 &intc 16>;
};
- pcie-port@1 {
+ pcie1: pcie-port@1 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
@@ -154,7 +157,7 @@
uart2: serial@12200 {
compatible = "ns16550a";
- reg = <0x12000 0x100>;
+ reg = <0x12200 0x100>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&core_clk 0>;
@@ -163,7 +166,7 @@
uart3: serial@12300 {
compatible = "ns16550a";
- reg = <0x12100 0x100>;
+ reg = <0x12300 0x100>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&core_clk 0>;
@@ -448,6 +451,11 @@
marvell,function = "gpio";
};
+ pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+ marvell,pins = "mpp9";
+ marvell,function = "pex1";
+ };
+
pmx_gpio_10: pmx-gpio-10 {
marvell,pins = "mpp10";
marvell,function = "gpio";
@@ -458,6 +466,11 @@
marvell,function = "gpio";
};
+ pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+ marvell,pins = "mpp11";
+ marvell,function = "pex0";
+ };
+
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
@@ -563,6 +576,18 @@
marvell,function = "gpio";
};
+ pmx_spi1_4_7: pmx-spi1-4-7 {
+ marvell,pins = "mpp4", "mpp5",
+ "mpp6", "mpp7";
+ marvell,function = "spi1";
+ };
+
+ pmx_spi1_20_23: pmx-spi1-20-23 {
+ marvell,pins = "mpp20", "mpp21",
+ "mpp22", "mpp23";
+ marvell,function = "spi1";
+ };
+
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp_uart1";
marvell,function = "uart1";
@@ -582,6 +607,36 @@
marvell,pins = "mpp_nand";
marvell,function = "gpo";
};
+
+ pmx_i2c1: pmx-i2c1 {
+ marvell,pins = "mpp17", "mpp19";
+ marvell,function = "twsi";
+ };
+
+ pmx_i2c2: pmx-i2c2 {
+ marvell,pins = "mpp_audio1";
+ marvell,function = "twsi";
+ };
+
+ pmx_ssp_i2c2: pmx-ssp-i2c2 {
+ marvell,pins = "mpp_audio1";
+ marvell,function = "ssp/twsi";
+ };
+
+ pmx_i2cmux_0: pmx-i2cmux-0 {
+ marvell,pins = "twsi";
+ marvell,function = "twsi-opt1";
+ };
+
+ pmx_i2cmux_1: pmx-i2cmux-1 {
+ marvell,pins = "twsi";
+ marvell,function = "twsi-opt2";
+ };
+
+ pmx_i2cmux_2: pmx-i2cmux-2 {
+ marvell,pins = "twsi";
+ marvell,function = "twsi-opt3";
+ };
};
core_clk: core-clocks@d0214 {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 746cddb..3290a96 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -543,14 +543,6 @@
};
};
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
- extcon = <&extcon_usb2>;
-};
-
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..127608d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -249,8 +249,8 @@
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <127>;
+ dma-channels = <32>;
+ dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
@@ -1090,8 +1090,8 @@
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
- clocks = <&sys_clkin1>;
- clock-names = "sysclk";
+ clocks = <&sys_clkin1>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
#phy-cells = <0>;
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4d87117..e0264d0 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -380,14 +380,6 @@
phy-supply = <&ldo4_reg>;
};
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
- extcon = <&extcon_usb2>;
-};
-
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
index 53dc37a..13a4477 100644
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ b/arch/arm/boot/dts/kirkwood-net2big.dts
@@ -27,6 +27,11 @@
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
+
+ fan {
+ compatible = "gpio-fan";
+ alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
};
®ulators {
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index b67ede5..5484413 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -150,5 +150,25 @@
interrupts = <0 15 1>;
status = "disabled";
};
+
+ spifc: spi@c1108c80 {
+ compatible = "amlogic,meson6-spifc";
+ reg = <0xc1108c80 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk81>;
+ status = "disabled";
+ };
+
+ ethmac: ethernet@c9410000 {
+ compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+ reg = <0xc9410000 0x10000
+ 0xc1108108 0x4>;
+ interrupts = <0 8 1>;
+ interrupt-names = "macirq";
+ clocks = <&clk81>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ };
};
}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
index d7d351a..1237faa 100644
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -64,3 +64,7 @@
&uart_AO {
status = "okay";
};
+
+ðmac {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
new file mode 100644
index 0000000..4f536bb
--- /dev/null
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "meson8.dtsi"
+
+/ {
+ model = "MINIX NEO-X8";
+ compatible = "minix,neo-x8", "amlogic,meson8";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "x8:blue:power";
+ gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c_AO {
+ status = "okay";
+ pinctrl-0 = <&i2c_ao_pins>;
+ pinctrl-names = "default";
+
+ pmic@32 {
+ compatible = "ricoh,rn5t618";
+ reg = <0x32>;
+
+ regulators {
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&spi_nor_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l1606e";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x10000>;
+ };
+ };
+};
+
+&ir_receiver {
+ status = "okay";
+ pinctrl-0 = <&ir_recv_pins>;
+ pinctrl-names = "default";
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_pins>;
+ pnictrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 1f442a7..a2ddcb8 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -43,6 +43,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/gpio/meson8-gpio.h>
/include/ "meson.dtsi"
/ {
@@ -89,4 +90,71 @@
compatible = "fixed-clock";
clock-frequency = <141666666>;
};
+
+ pinctrl: pinctrl@c1109880 {
+ compatible = "amlogic,meson8-pinctrl";
+ reg = <0xc1109880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@c11080b0 {
+ reg = <0xc11080b0 0x28>,
+ <0xc11080e8 0x18>,
+ <0xc1108120 0x18>,
+ <0xc1108030 0x30>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_mst_ao {
+ mux {
+ groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+ function = "i2c_mst_ao";
+ };
+ };
+
+ spi_nor_pins: nor {
+ mux {
+ groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+ function = "nor";
+ };
+ };
+
+ ir_recv_pins: remote {
+ mux {
+ groups = "remote_input";
+ function = "remote";
+ };
+ };
+
+ eth_pins: ethernet {
+ mux {
+ groups = "eth_tx_clk_50m", "eth_tx_en",
+ "eth_txd1", "eth_txd0",
+ "eth_rx_clk_in", "eth_rx_dv",
+ "eth_rxd1", "eth_rxd0", "eth_mdio",
+ "eth_mdc";
+ function = "ethernet";
+ };
+ };
+ };
+
}; /* end of / */
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 9565199..4907c50 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -51,6 +51,11 @@
compatible = "lsi,nspire-classic-ahb-divider";
};
+
+&vbus_reg {
+ gpio = <&gpio 5 0>;
+};
+
/ {
memory {
device_type = "memory";
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 375b924..08e0b81 100644
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -69,6 +69,10 @@
0x0709001d 0x070a0033 >;
};
+&vbus_reg {
+ gpio = <&gpio 2 0>;
+};
+
/ {
model = "TI-NSPIRE CX";
compatible = "ti,nspire-cx";
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index a22ffe6..390c91a 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -54,6 +54,20 @@
clocks = <&ahb_clk>;
};
+ usb_phy: usb_phy {
+ compatible = "usb-nop-xceiv";
+ };
+
+ vbus_reg: vbus_reg {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB VBUS output";
+ regulator-type = "voltage";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -65,8 +79,12 @@
};
usb0: usb@B0000000 {
+ compatible = "lsi,zevio-usb";
reg = <0xB0000000 0x1000>;
interrupts = <8>;
+
+ usb-phy = <&usb_phy>;
+ vbus-supply = <&vbus_reg>;
};
usb1: usb@B4000000 {
@@ -105,8 +123,11 @@
ranges;
gpio: gpio@90000000 {
+ compatible = "lsi,zevio-gpio";
reg = <0x90000000 0x1000>;
interrupts = <7>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
fast_timer: timer@90010000 {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 59d1c29..578fa2a 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -87,8 +87,8 @@
<14>,
<15>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <64>;
+ dma-channels = <32>;
+ dma-requests = <64>;
};
i2c1: i2c@48070000 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 6040327..db80f9d 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -16,6 +16,13 @@
model = "Nokia N900";
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+ aliases {
+ i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
@@ -704,7 +711,7 @@
compatible = "smsc,lan91c94";
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
- reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
+ reg = <1 0 0xf>; /* 16 byte IO range */
bank-width = <2>;
pinctrl-names = "default";
pinctrl-0 = <ðernet_pins>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 01b7111..f4f78c4 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -155,8 +155,8 @@
<14>,
<15>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <96>;
+ dma-channels = <32>;
+ dma-requests = <96>;
};
omap3_pmx_core: pinmux@48002030 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 074147c..87401d9 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -223,8 +223,8 @@
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <127>;
+ dma-channels = <32>;
+ dma-requests = <127>;
};
gpio1: gpio@4a310000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b321fdf..ddff674 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -238,8 +238,8 @@
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <32>;
- #dma-requests = <127>;
+ dma-channels = <32>;
+ dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
@@ -929,8 +929,8 @@
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
- clocks = <&sys_clkin>;
- clock-names = "sysclk";
+ clocks = <&sys_clkin>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
#phy-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 9a09579..bdf8570 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -103,6 +103,14 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vsys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
};
&emac {
@@ -148,6 +156,14 @@
pinctrl-names = "default";
pinctrl-0 = <&act8846_dvs0_ctl>;
+ vp1-supply = <&vsys>;
+ vp2-supply = <&vsys>;
+ vp3-supply = <&vsys>;
+ vp4-supply = <&vsys>;
+ inl1-supply = <&vcc_io>;
+ inl2-supply = <&vsys>;
+ inl3-supply = <&vsys>;
+
regulators {
vcc_ddr: REG1 {
regulator-name = "VCC_DDR";
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index d7b8bbc..1687e83 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -33,6 +33,7 @@
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ vin-supply = <&vcc_sys>;
};
vdd_gpu: syr828@41 {
@@ -43,6 +44,7 @@
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
+ vin-supply = <&vcc_sys>;
};
hym8563@51 {
@@ -64,6 +66,14 @@
reg = <0x5a>;
status = "okay";
+ vp1-supply = <&vcc_sys>;
+ vp2-supply = <&vcc_sys>;
+ vp3-supply = <&vcc_sys>;
+ vp4-supply = <&vcc_sys>;
+ inl1-supply = <&vcc_io>;
+ inl2-supply = <&vcc_sys>;
+ inl3-supply = <&vcc_20>;
+
regulators {
vcc_ddr: REG1 {
regulator-name = "VCC_DDR";
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index a1c294b..f62ea78 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -43,9 +43,16 @@
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_18>;
vcc9-supply = <&vcc_io>;
vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc_io>;
vddio-supply = <&vccio_pmu>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 5e895a5..4a45751 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -103,6 +103,15 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&emmc {
@@ -238,6 +247,10 @@
};
};
+&usbphy {
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index e6f873a..b54dd78 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -179,6 +179,22 @@
status = "okay";
};
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
@@ -459,6 +475,10 @@
status = "okay";
};
+&usbphy {
+ status = "okay";
+};
+
&usb_host1 {
pinctrl-names = "default";
pinctrl-0 = <&usbhub_rst>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
new file mode 100644
index 0000000..d081f0e
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+
+/ {
+ model = "PopMetal-RK3288";
+ compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+ memory{
+ reg = <0 0x80000000>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ };
+
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_18>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lan: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ ldo5: LDO_REG5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ldo5";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_codec: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_wl: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ak8963: ak8963@0d {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0d>;
+ interrupt-parent = <&gpio8>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&comp_int>;
+ };
+
+ l3g4200d: l3g4200d@68 {
+ compatible = "st,l3g4200d-gyro";
+ st,drdy-int-pin = <2>;
+ reg = <0x6b>;
+ };
+
+ mma8452: mma8452@1d {
+ compatible = "fsl,mma8452";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio8>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsensor_int>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ ak8963 {
+ comp_int: comp-int {
+ rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ mma8452 {
+ gsensor_int: gsensor-int {
+ rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index d771f68..2c29a3e 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -419,6 +419,8 @@
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
clock-names = "usbhost";
+ phys = <&usbphy1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -431,6 +433,8 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
+ phys = <&usbphy2>;
+ phy-names = "usb2-phy";
status = "disabled";
};
@@ -441,6 +445,8 @@
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
status = "disabled";
};
@@ -697,6 +703,35 @@
interrupts = <GIC_PPI 9 0xf04>;
};
+ usbphy: phy {
+ compatible = "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x320>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ };
+
+ usbphy1: usb-phy1 {
+ #phy-cells = <0>;
+ reg = <0x334>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ };
+
+ usbphy2: usb-phy2 {
+ #phy-cells = <0>;
+ reg = <0x348>;
+ clocks = <&cru SCLK_OTGPHY2>;
+ clock-names = "phyclk";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3288-pinctrl";
rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 261311b..e30fee2 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1248,7 +1248,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index 9089c7c..d9a9aca 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -44,8 +44,6 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pb_user1 {
label = "pb_user1";
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index eaf4145..c5a3772 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
* CAN support
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
index fe2af92..ca4094d 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
* Ethernet.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
index de5ed59..23f225f 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
* Gigabit Ethernet.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 85d3027..8aeff6c 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
* LCD support
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 1b02208..026b252 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
* 3 MMC ports
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 0284845..f7fa58f 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
* 2 TC blocks.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 7a8d4c6..2511d74 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
* UART support
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index d986b41..63eb7a2 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -64,8 +64,13 @@
gpio2 = &pioC;
gpio3 = &pioD;
gpio4 = &pioE;
+ pwm0 = &pwm0;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
i2c2 = &i2c2;
};
cpus {
@@ -318,6 +323,21 @@
clock-names = "dma_clk";
};
+ isi: isi@f0008000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
+ status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
ramc0: ramc@f0010000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf0010000 0x200>;
@@ -799,6 +819,33 @@
clock-names = "mci_clk";
};
+ ssc0: ssc@f8008000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf8008000 0x4000>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(26))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(27))>;
+ dma-names = "tx", "rx";
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ pwm0: pwm@f800c000 {
+ compatible = "atmel,sama5d3-pwm";
+ reg = <0xf800c000 0x300>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ status = "disabled";
+ };
+
spi0: spi@f8010000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -838,6 +885,25 @@
status = "disabled";
};
+ i2c1: i2c@f8018000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8018000 0x4000>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(4)>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(5)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi1_clk>;
+ status = "disabled";
+ };
+
tcb0: timer@f801c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf801c000 0x100>;
@@ -852,6 +918,8 @@
interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&macb0_clk>, <&macb0_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
@@ -952,6 +1020,24 @@
status = "disabled";
};
+ ssc1: ssc@fc014000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xfc014000 0x4000>;
+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(28))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
tcb1: timer@fc020000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xfc020000 0x100>;
@@ -1007,6 +1093,46 @@
};
};
+ aes@fc044000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(41)>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(40)>;
+ dma-names = "tx", "rx";
+ clocks = <&aes_clk>;
+ clock-names = "aes_clk";
+ status = "disabled";
+ };
+
+ tdes@fc04c000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc04c000 0x100>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(42)>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(43)>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "disabled";
+ };
+
+ sha@fc050000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xfc050000 0x100>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(44)>;
+ dma-names = "tx";
+ clocks = <&sha_clk>;
+ clock-names = "sha_clk";
+ status = "disabled";
+ };
+
rstc@fc068600 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
@@ -1189,6 +1315,14 @@
};
};
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
+ AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
+ };
+ };
+
i2c2 {
pinctrl_i2c2: i2c2-0 {
atmel,pins =
@@ -1197,6 +1331,33 @@
};
};
+ isi {
+ pinctrl_isi_data_0_7: isi-0-data-0-7 {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D0 */
+ AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D1 */
+ AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D2 */
+ AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D3 */
+ AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D4 */
+ AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D5 */
+ AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D6 */
+ AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D7 */
+ AT91_PIOB 1 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_PCK, conflict with G0_RXCK */
+ AT91_PIOB 3 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_VSYNC */
+ AT91_PIOB 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_HSYNC */
+ };
+ pinctrl_isi_data_8_9: isi-0-data-8-9 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+ AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+ };
+ pinctrl_isi_data_10_11: isi-0-data-10-11 {
+ atmel,pins =
+ <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+ AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+ };
+ };
+
macb0 {
pinctrl_macb0_rmii: macb0_rmii-0 {
atmel,pins =
@@ -1280,6 +1441,38 @@
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx {
+ atmel,pins =
+ <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK0 */
+ AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF0 */
+ AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD0 */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx {
+ atmel,pins =
+ <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK0 */
+ AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF0 */
+ AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD0 */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK1 */
+ AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF1 */
+ AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD1 */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx {
+ atmel,pins =
+ <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK1 */
+ AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF1 */
+ AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD1 */
+ };
+ };
+
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index f2670f6..811e72b 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -70,6 +70,7 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
+CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e8a4c95..b7e6b6fb 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -62,6 +62,17 @@
CONFIG_ARCH_STI=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
+CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R7S72100=y
+CONFIG_ARCH_R8A73A4=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_ARCH_R8A7779=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7794=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_MARZEN=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
@@ -84,6 +95,8 @@
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
CONFIG_PCI_TEGRA=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
@@ -130,6 +143,7 @@
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
+CONFIG_SIMPLE_PM_BUS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
@@ -157,6 +171,7 @@
CONFIG_AHCI_TEGRA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
+CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_SUN4I_EMAC=y
@@ -167,14 +182,17 @@
CONFIG_MVNETA=y
CONFIG_KS8851=y
CONFIG_R8169=y
+CONFIG_SH_ETH=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_TI_CPSW=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
CONFIG_MARVELL_PHY=y
+CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
+CONFIG_MICREL_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
@@ -192,15 +210,18 @@
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
@@ -213,6 +234,9 @@
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_VT8500=y
@@ -233,19 +257,26 @@
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_GPIO=m
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_RIIC=y
CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIRF=y
-CONFIG_I2C_TEGRA=y
CONFIG_I2C_ST=y
-CONFIG_SPI=y
+CONFIG_I2C_TEGRA=y
CONFIG_I2C_XILINX=y
-CONFIG_SPI_DAVINCI=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
CONFIG_SPI_CADENCE=y
+CONFIG_SPI_DAVINCI=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
+CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=m
+CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
@@ -259,12 +290,15 @@
CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_EM=y
+CONFIG_GPIO_RCAR=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_SYSCON=y
@@ -276,10 +310,12 @@
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SUN6I=y
+CONFIG_POWER_RESET_RMOBILE=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
+CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DAVINCI_WATCHDOG
CONFIG_ST_THERMAL_SYSCFG=y
@@ -290,6 +326,7 @@
CONFIG_ORION_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
+CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
@@ -304,13 +341,16 @@
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
+CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_MAX8907=y
+CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_S2MPS11=y
@@ -324,18 +364,32 @@
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_GSPCA=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_VSP1=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=m
CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
+CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SIMPLE=y
+CONFIG_FB_SH_MOBILE_MERAM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_SOUND=y
@@ -343,6 +397,8 @@
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
@@ -350,6 +406,8 @@
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8978=m
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
@@ -362,6 +420,8 @@
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_USB_CHIPIDEA=y
@@ -374,6 +434,10 @@
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
+CONFIG_USB_RCAR_PHY=m
+CONFIG_USB_RCAR_GEN2_PHY=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
@@ -392,12 +456,14 @@
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SUNXI=y
+CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_MMC_SUNXI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
@@ -421,10 +487,12 @@
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
+CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_VT8500=y
@@ -436,6 +504,9 @@
CONFIG_DW_DMAC=y
CONFIG_MV_XOR=y
CONFIG_TEGRA20_APB_DMA=y
+CONFIG_SH_DMAE=y
+CONFIG_RCAR_AUDMAC_PP=m
+CONFIG_RCAR_DMAC=y
CONFIG_STE_DMA40=y
CONFIG_SIRF_DMA=y
CONFIG_TI_EDMA=y
@@ -468,6 +539,7 @@
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
CONFIG_PWM=y
+CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b738652..a097cff 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -114,6 +114,7 @@
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
@@ -248,6 +249,7 @@
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_TI_ABB=y
+CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
@@ -374,7 +376,7 @@
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
-CONFIG_TI_PIPE3=m
+CONFIG_TI_PIPE3=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 41d856e..510c747 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -3,8 +3,6 @@
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
index 8423be7..5224120 100644
--- a/arch/arm/mach-asm9260/Kconfig
+++ b/arch/arm/mach-asm9260/Kconfig
@@ -2,5 +2,7 @@
bool "Alphascale ASM9260"
depends on ARCH_MULTI_V5
select CPU_ARM926T
+ select ASM9260_TIMER
+ select GENERIC_CLOCKEVENTS
help
Support for Alphascale ASM9260 based platform.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5e34fb1..aa4116e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -270,37 +270,35 @@
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
- struct platform_device *pdev;
+ struct platform_device *pdev = NULL;
- node = of_find_compatible_node(NULL, NULL, "mmio-sram");
- if (!node) {
- pr_warn("%s: failed to find sram node!\n", __func__);
- return;
+ for_each_compatible_node(node, NULL, "mmio-sram") {
+ pdev = of_find_device_by_node(node);
+ if (pdev) {
+ of_node_put(node);
+ break;
+ }
}
- pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
- goto put_node;
+ return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
- goto put_node;
+ return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
- goto put_node;
+ return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
-
-put_node:
- of_node_put(node);
}
#endif
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index d2c8996..86c0aa8 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -44,7 +44,7 @@
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
- : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+ : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 556151e8..a2cc49f 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -25,11 +25,6 @@
*/
#undef SLOWDOWN_MASTER_CLOCK
-#define MCKRDY_TIMEOUT 1000
-#define MOSCRDY_TIMEOUT 1000
-#define PLLALOCK_TIMEOUT 1000
-#define PLLBLOCK_TIMEOUT 1000
-
pmc .req r0
sdramc .req r1
ramc1 .req r2
@@ -41,56 +36,36 @@
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
- mov tmp2, #MCKRDY_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
-2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
- mov tmp2, #MOSCRDY_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
-2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
- mov tmp2, #PLLALOCK_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
-2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
- mov tmp2, #PLLBLOCK_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
-2:
.endm
.text
@@ -134,6 +109,16 @@
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
+ /* LPDDR1 --> force DDR2 mode during self-refresh */
+ ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+ str tmp1, .saved_sam9_mdr
+ bic tmp1, tmp1, #~AT91_DDRSDRC_MD
+ cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+ ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+ biceq tmp1, tmp1, #AT91_DDRSDRC_MD
+ orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+ streq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
@@ -142,14 +127,26 @@
/* figure out if we use the second ram controller */
cmp ramc1, #0
- ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
- strne tmp2, .saved_sam9_lpr1
- bicne tmp2, #AT91_DDRSDRC_LPCB
- orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ beq ddr_no_2nd_ctrl
+
+ ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+ str tmp2, .saved_sam9_mdr1
+ bic tmp2, tmp2, #~AT91_DDRSDRC_MD
+ cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+ ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+ biceq tmp2, tmp2, #AT91_DDRSDRC_MD
+ orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+ streq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+ ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ str tmp2, .saved_sam9_lpr1
+ bic tmp2, #AT91_DDRSDRC_LPCB
+ orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
+ str tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
- strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b sdr_sr_done
@@ -280,12 +277,17 @@
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
+ /* Restore MDR in case of LPDDR1 */
+ ldr tmp1, .saved_sam9_mdr
+ str tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
+ ldrne tmp2, .saved_sam9_mdr1
+ strne tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
@@ -319,5 +321,11 @@
.saved_sam9_lpr1:
.word 0
+.saved_sam9_mdr:
+ .word 0
+
+.saved_sam9_mdr1:
+ .word 0
+
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 27f3296..4eac8dc 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -34,6 +34,7 @@
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
@@ -41,6 +42,7 @@
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
@@ -48,6 +50,7 @@
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
@@ -55,6 +58,11 @@
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index d429129..133ee59 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -39,6 +39,7 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A57_L2>;
};
A57_1: cpu@1 {
@@ -46,6 +47,7 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A57_L2>;
};
A53_0: cpu@100 {
@@ -53,6 +55,7 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
};
A53_1: cpu@101 {
@@ -60,6 +63,7 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
};
A53_2: cpu@102 {
@@ -67,6 +71,7 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
};
A53_3: cpu@103 {
@@ -74,6 +79,15 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index efc59b3..20addab 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -37,6 +37,7 @@
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
@@ -44,6 +45,7 @@
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
@@ -51,6 +53,7 @@
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
@@ -58,6 +61,11 @@
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index 5720608..abb79b3 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o
aes-neon-blk-y := aes-glue-neon.o aes-neon.o
-AFLAGS_aes-ce.o := -DINTERLEAVE=2 -DINTERLEAVE_INLINE
+AFLAGS_aes-ce.o := -DINTERLEAVE=4
AFLAGS_aes-neon.o := -DINTERLEAVE=4
CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_EXTENSIONS
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 5901480..750bac4 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -20,6 +20,9 @@
#error "Only include this from assembly code"
#endif
+#ifndef __ASM_ASSEMBLER_H
+#define __ASM_ASSEMBLER_H
+
#include <asm/ptrace.h>
#include <asm/thread_info.h>
@@ -155,3 +158,5 @@
#endif
orr \rd, \lbits, \hbits, lsl #32
.endm
+
+#endif /* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h
index 0710654..c60643f 100644
--- a/arch/arm64/include/asm/cpuidle.h
+++ b/arch/arm64/include/asm/cpuidle.h
@@ -1,6 +1,8 @@
#ifndef __ASM_CPUIDLE_H
#define __ASM_CPUIDLE_H
+#include <asm/proc-fns.h>
+
#ifdef CONFIG_CPU_IDLE
extern int cpu_init_idle(unsigned int cpu);
extern int cpu_suspend(unsigned long arg);
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index e2ff32a..d2f4942 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -264,8 +264,10 @@
__AARCH64_INSN_FUNCS(bics, 0x7F200000, 0x6A200000)
__AARCH64_INSN_FUNCS(b, 0xFC000000, 0x14000000)
__AARCH64_INSN_FUNCS(bl, 0xFC000000, 0x94000000)
-__AARCH64_INSN_FUNCS(cbz, 0xFE000000, 0x34000000)
-__AARCH64_INSN_FUNCS(cbnz, 0xFE000000, 0x35000000)
+__AARCH64_INSN_FUNCS(cbz, 0x7F000000, 0x34000000)
+__AARCH64_INSN_FUNCS(cbnz, 0x7F000000, 0x35000000)
+__AARCH64_INSN_FUNCS(tbz, 0x7F000000, 0x36000000)
+__AARCH64_INSN_FUNCS(tbnz, 0x7F000000, 0x37000000)
__AARCH64_INSN_FUNCS(bcond, 0xFF000010, 0x54000000)
__AARCH64_INSN_FUNCS(svc, 0xFFE0001F, 0xD4000001)
__AARCH64_INSN_FUNCS(hvc, 0xFFE0001F, 0xD4000002)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 16449c5..800ec0e 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -460,7 +460,7 @@
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
- PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
+ PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index f9be30e..20e9591 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -45,7 +45,8 @@
#define STACK_TOP STACK_TOP_MAX
#endif /* CONFIG_COMPAT */
-#define ARCH_LOW_ADDRESS_LIMIT PHYS_MASK
+extern phys_addr_t arm64_dma_phys_limit;
+#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1)
#endif /* __KERNEL__ */
struct debug_info {
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index 73f0ce5..4abe9b9 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -24,11 +24,6 @@
#include <linux/sched.h>
#include <asm/cputype.h>
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-extern struct cpu_tlb_fns cpu_tlb;
-
/*
* TLB Management
* ==============
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index bef04af..5ee07ee 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -15,8 +15,9 @@
arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
- hyp-stub.o psci.o cpu_ops.o insn.o return_address.o \
- cpuinfo.o cpu_errata.o alternative.o cacheinfo.o
+ hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o \
+ return_address.o cpuinfo.o cpu_errata.o \
+ alternative.o cacheinfo.o
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o \
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index cf8556a..c851be7 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -156,7 +156,7 @@
branch = aarch64_insn_gen_branch_imm(pc,
(unsigned long)ftrace_graph_caller,
- AARCH64_INSN_BRANCH_LINK);
+ AARCH64_INSN_BRANCH_NOLINK);
nop = aarch64_insn_gen_nop();
if (enable)
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index 27d4864..c8eca88 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -87,8 +87,10 @@
if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX))
page = vmalloc_to_page(addr);
- else
+ else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA))
page = virt_to_page(addr);
+ else
+ return addr;
BUG_ON(!page);
set_fixmap(fixmap, page_to_phys(page));
diff --git a/arch/arm64/kernel/psci-call.S b/arch/arm64/kernel/psci-call.S
new file mode 100644
index 0000000..cf83e61
--- /dev/null
+++ b/arch/arm64/kernel/psci-call.S
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/linkage.h>
+
+/* int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
+ENTRY(__invoke_psci_fn_hvc)
+ hvc #0
+ ret
+ENDPROC(__invoke_psci_fn_hvc)
+
+/* int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
+ENTRY(__invoke_psci_fn_smc)
+ smc #0
+ ret
+ENDPROC(__invoke_psci_fn_smc)
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 3425f31..9b8a70a 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -57,6 +57,9 @@
static int (*invoke_psci_fn)(u64, u64, u64, u64);
typedef int (*psci_initcall_t)(const struct device_node *);
+asmlinkage int __invoke_psci_fn_hvc(u64, u64, u64, u64);
+asmlinkage int __invoke_psci_fn_smc(u64, u64, u64, u64);
+
enum psci_function {
PSCI_FN_CPU_SUSPEND,
PSCI_FN_CPU_ON,
@@ -109,40 +112,6 @@
PSCI_0_2_POWER_STATE_AFFL_SHIFT;
}
-/*
- * The following two functions are invoked via the invoke_psci_fn pointer
- * and will not be inlined, allowing us to piggyback on the AAPCS.
- */
-static noinline int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1,
- u64 arg2)
-{
- asm volatile(
- __asmeq("%0", "x0")
- __asmeq("%1", "x1")
- __asmeq("%2", "x2")
- __asmeq("%3", "x3")
- "hvc #0\n"
- : "+r" (function_id)
- : "r" (arg0), "r" (arg1), "r" (arg2));
-
- return function_id;
-}
-
-static noinline int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
- u64 arg2)
-{
- asm volatile(
- __asmeq("%0", "x0")
- __asmeq("%1", "x1")
- __asmeq("%2", "x2")
- __asmeq("%3", "x3")
- "smc #0\n"
- : "+r" (function_id)
- : "r" (arg0), "r" (arg1), "r" (arg2));
-
- return function_id;
-}
-
static int psci_get_version(void)
{
int err;
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index c20a300..d26fcd4 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -154,8 +154,7 @@
case __SI_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
- err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr,
- &to->si_ptr);
+ err |= __put_user(from->si_int, &to->si_int);
break;
case __SI_POLL:
err |= __put_user(from->si_band, &to->si_band);
@@ -184,7 +183,7 @@
case __SI_MESGQ: /* But this is */
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
- err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
+ err |= __put_user(from->si_int, &to->si_int);
break;
case __SI_SYS:
err |= __put_user((compat_uptr_t)(unsigned long)
diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S
index fe652ff..efa79e8 100644
--- a/arch/arm64/kernel/vdso/gettimeofday.S
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@@ -174,8 +174,6 @@
/* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); */
ENTRY(__kernel_clock_getres)
.cfi_startproc
- cbz w1, 3f
-
cmp w0, #CLOCK_REALTIME
ccmp w0, #CLOCK_MONOTONIC, #0x4, ne
b.ne 1f
@@ -188,6 +186,7 @@
b.ne 4f
ldr x2, 6f
2:
+ cbz w1, 3f
stp xzr, x2, [x1]
3: /* res == NULL. */
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 0a24b9b..58e0c2b 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -348,8 +348,6 @@
.mapping_error = swiotlb_dma_mapping_error,
};
-extern int swiotlb_late_init_with_default_size(size_t default_size);
-
static int __init atomic_pool_init(void)
{
pgprot_t prot = __pgprot(PROT_NORMAL_NC);
@@ -411,21 +409,13 @@
return -ENOMEM;
}
-static int __init swiotlb_late_init(void)
+static int __init arm64_dma_init(void)
{
- size_t swiotlb_size = min(SZ_64M, MAX_ORDER_NR_PAGES << PAGE_SHIFT);
+ int ret;
dma_ops = &swiotlb_dma_ops;
- return swiotlb_late_init_with_default_size(swiotlb_size);
-}
-
-static int __init arm64_dma_init(void)
-{
- int ret = 0;
-
- ret |= swiotlb_late_init();
- ret |= atomic_pool_init();
+ ret = atomic_pool_init();
return ret;
}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 71145f9..ae85da6 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -33,6 +33,7 @@
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
#include <linux/efi.h>
+#include <linux/swiotlb.h>
#include <asm/fixmap.h>
#include <asm/memory.h>
@@ -45,6 +46,7 @@
#include "mm.h"
phys_addr_t memstart_addr __read_mostly = 0;
+phys_addr_t arm64_dma_phys_limit __read_mostly;
#ifdef CONFIG_BLK_DEV_INITRD
static int __init early_initrd(char *p)
@@ -85,7 +87,7 @@
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA)) {
- max_dma = PFN_DOWN(max_zone_dma_phys());
+ max_dma = PFN_DOWN(arm64_dma_phys_limit);
zone_size[ZONE_DMA] = max_dma - min;
}
zone_size[ZONE_NORMAL] = max - max_dma;
@@ -156,8 +158,6 @@
void __init arm64_memblock_init(void)
{
- phys_addr_t dma_phys_limit = 0;
-
memblock_enforce_memory_limit(memory_limit);
/*
@@ -174,8 +174,10 @@
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA))
- dma_phys_limit = max_zone_dma_phys();
- dma_contiguous_reserve(dma_phys_limit);
+ arm64_dma_phys_limit = max_zone_dma_phys();
+ else
+ arm64_dma_phys_limit = PHYS_MASK + 1;
+ dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
memblock_dump_all();
@@ -276,6 +278,8 @@
*/
void __init mem_init(void)
{
+ swiotlb_init(1);
+
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
#ifndef CONFIG_SPARSEMEM_VMEMMAP
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 93bcf2a..07d7a7e 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -123,12 +123,14 @@
#define PGDIR_MASK (~(PGDIR_SIZE - 1))
#define PTRS_PER_PGD 64
+#define __PAGETABLE_PUD_FOLDED
#define PUD_SHIFT 26
#define PTRS_PER_PUD 1
#define PUD_SIZE (1UL << PUD_SHIFT)
#define PUD_MASK (~(PUD_SIZE - 1))
#define PUE_SIZE 256
+#define __PAGETABLE_PMD_FOLDED
#define PMD_SHIFT 26
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE - 1))
diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
index 8fd8ee7..421e6ba 100644
--- a/arch/m32r/include/asm/pgtable-2level.h
+++ b/arch/m32r/include/asm/pgtable-2level.h
@@ -13,6 +13,7 @@
* the M32R is two-level, so we don't really have any
* PMD directory physically.
*/
+#define __PAGETABLE_PMD_FOLDED
#define PMD_SHIFT 22
#define PTRS_PER_PMD 1
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 28a145b..35ed4a9 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -54,10 +54,12 @@
*/
#ifdef CONFIG_SUN3
#define PTRS_PER_PTE 16
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 2048
#elif defined(CONFIG_COLDFIRE)
#define PTRS_PER_PTE 512
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 1024
#else
diff --git a/arch/metag/include/asm/processor.h b/arch/metag/include/asm/processor.h
index 881071c..13272fd 100644
--- a/arch/metag/include/asm/processor.h
+++ b/arch/metag/include/asm/processor.h
@@ -149,8 +149,8 @@
unsigned long get_wchan(struct task_struct *p);
-#define KSTK_EIP(tsk) ((tsk)->thread.kernel_context->CurrPC)
-#define KSTK_ESP(tsk) ((tsk)->thread.kernel_context->AX[0].U0)
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ctx.CurrPC)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->ctx.AX[0].U0)
#define user_stack_pointer(regs) ((regs)->ctx.AX[0].U0)
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index afab728..96d3f9d 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -56,7 +56,9 @@
#define PGDIR_SHIFT 22
#define PTRS_PER_PGD 1024
#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */
+#define __PAGETABLE_PUD_FOLDED
#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PTE 1024
#define PGD_SIZE PAGE_SIZE
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 8c966b2..15207b9 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -96,6 +96,7 @@
#if PT_NLEVELS == 3
#define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY)
#else
+#define __PAGETABLE_PMD_FOLDED
#define BITS_PER_PMD 0
#endif
#define PTRS_PER_PMD (1UL << BITS_PER_PMD)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index fbb5ee3..e08ec38 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -91,7 +91,9 @@
*/
#define PTRS_PER_PTE 256
#ifndef CONFIG_64BIT
+#define __PAGETABLE_PUD_FOLDED
#define PTRS_PER_PMD 1
+#define __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PUD 1
#else /* CONFIG_64BIT */
#define PTRS_PER_PMD 2048
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b5c8ff5..2346c95 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1396,6 +1396,12 @@
wait_for_master_cpu(cpu);
+ /*
+ * Initialize the CR4 shadow before doing anything that could
+ * try to read it.
+ */
+ cr4_init_shadow();
+
show_ucode_info_early();
printk(KERN_INFO "Initializing CPU#%d\n", cpu);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 94d7dcb..50163fa 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -565,8 +565,8 @@
{ 0xb2, TLB_INST_4K, 64, " TLB_INST 4KByte pages, 4-way set associative" },
{ 0xb3, TLB_DATA_4K, 128, " TLB_DATA 4 KByte pages, 4-way set associative" },
{ 0xb4, TLB_DATA_4K, 256, " TLB_DATA 4 KByte pages, 4-way associative" },
- { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set ssociative" },
- { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set ssociative" },
+ { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set associative" },
+ { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set associative" },
{ 0xba, TLB_DATA_4K, 64, " TLB_DATA 4 KByte pages, 4-way associative" },
{ 0xc0, TLB_DATA_4K_4M, 8, " TLB_DATA 4 KByte and 4 MByte pages, 4-way associative" },
{ 0xc1, STLB_4K_2M, 1024, " STLB 4 KByte and 2 MByte pages, 8-way associative" },
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 000d419..31e2d5b 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -982,6 +982,9 @@
ENTRY(xen_do_upcall)
1: mov %esp, %eax
call xen_evtchn_do_upcall
+#ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+#endif
jmp ret_from_intr
CFI_ENDPROC
ENDPROC(xen_hypervisor_callback)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index db13655..10074ad 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1208,6 +1208,9 @@
popq %rsp
CFI_DEF_CFA_REGISTER rsp
decl PER_CPU_VAR(irq_count)
+#ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+#endif
jmp error_exit
CFI_ENDPROC
END(xen_do_hypervisor_callback)
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 6a1146e..4e3d5a96 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -223,27 +223,48 @@
__recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
{
struct kprobe *kp;
+ unsigned long faddr;
kp = get_kprobe((void *)addr);
- /* There is no probe, return original address */
- if (!kp)
+ faddr = ftrace_location(addr);
+ /*
+ * Addresses inside the ftrace location are refused by
+ * arch_check_ftrace_location(). Something went terribly wrong
+ * if such an address is checked here.
+ */
+ if (WARN_ON(faddr && faddr != addr))
+ return 0UL;
+ /*
+ * Use the current code if it is not modified by Kprobe
+ * and it cannot be modified by ftrace.
+ */
+ if (!kp && !faddr)
return addr;
/*
- * Basically, kp->ainsn.insn has an original instruction.
- * However, RIP-relative instruction can not do single-stepping
- * at different place, __copy_instruction() tweaks the displacement of
- * that instruction. In that case, we can't recover the instruction
- * from the kp->ainsn.insn.
+ * Basically, kp->ainsn.insn has an original instruction.
+ * However, RIP-relative instruction can not do single-stepping
+ * at different place, __copy_instruction() tweaks the displacement of
+ * that instruction. In that case, we can't recover the instruction
+ * from the kp->ainsn.insn.
*
- * On the other hand, kp->opcode has a copy of the first byte of
- * the probed instruction, which is overwritten by int3. And
- * the instruction at kp->addr is not modified by kprobes except
- * for the first byte, we can recover the original instruction
- * from it and kp->opcode.
+ * On the other hand, in case on normal Kprobe, kp->opcode has a copy
+ * of the first byte of the probed instruction, which is overwritten
+ * by int3. And the instruction at kp->addr is not modified by kprobes
+ * except for the first byte, we can recover the original instruction
+ * from it and kp->opcode.
+ *
+ * In case of Kprobes using ftrace, we do not have a copy of
+ * the original instruction. In fact, the ftrace location might
+ * be modified at anytime and even could be in an inconsistent state.
+ * Fortunately, we know that the original code is the ideal 5-byte
+ * long NOP.
*/
- memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- buf[0] = kp->opcode;
+ memcpy(buf, (void *)addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+ if (faddr)
+ memcpy(buf, ideal_nops[NOP_ATOMIC5], 5);
+ else
+ buf[0] = kp->opcode;
return (unsigned long)buf;
}
@@ -251,6 +272,7 @@
* Recover the probed instruction at addr for further analysis.
* Caller must lock kprobes by kprobe_mutex, or disable preemption
* for preventing to release referencing kprobes.
+ * Returns zero if the instruction can not get recovered.
*/
unsigned long recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
{
@@ -285,6 +307,8 @@
* normally used, we just go through if there is no kprobe.
*/
__addr = recover_probed_instruction(buf, addr);
+ if (!__addr)
+ return 0;
kernel_insn_init(&insn, (void *)__addr, MAX_INSN_SIZE);
insn_get_length(&insn);
@@ -333,6 +357,8 @@
unsigned long recovered_insn =
recover_probed_instruction(buf, (unsigned long)src);
+ if (!recovered_insn)
+ return 0;
kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
insn_get_length(&insn);
/* Another subsystem puts a breakpoint, failed to recover */
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 0dd8d08..7b3b9d1 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -259,6 +259,8 @@
*/
return 0;
recovered_insn = recover_probed_instruction(buf, addr);
+ if (!recovered_insn)
+ return 0;
kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
insn_get_length(&insn);
/* Another subsystem puts a breakpoint */
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 4a0890f..08f41ca 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -1,6 +1,6 @@
config LGUEST_GUEST
bool "Lguest guest support"
- depends on X86_32 && PARAVIRT
+ depends on X86_32 && PARAVIRT && PCI
select TTY
select VIRTUALIZATION
select VIRTIO
@@ -8,7 +8,7 @@
help
Lguest is a tiny in-kernel hypervisor. Selecting this will
allow your kernel to boot under lguest. This option will increase
- your kernel size by about 6k. If in doubt, say N.
+ your kernel size by about 10k. If in doubt, say N.
If you say Y here, make sure you say Y (or M) to the virtio block
and net drivers which lguest needs.
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 1bbedc4..3005f0c 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -130,7 +130,7 @@
intel_mid_ops = get_intel_mid_ops[__intel_mid_cpu_chip]();
else {
intel_mid_ops = get_intel_mid_ops[INTEL_MID_CPU_CHIP_PENWELL]();
- pr_info("ARCH: Uknown SoC, assuming PENWELL!\n");
+ pr_info("ARCH: Unknown SoC, assuming PENWELL!\n");
}
out:
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bd8b845..5240f56 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1070,6 +1070,23 @@
BUG_ON(val);
}
#endif
+
+static u64 xen_read_msr_safe(unsigned int msr, int *err)
+{
+ u64 val;
+
+ val = native_read_msr_safe(msr, err);
+ switch (msr) {
+ case MSR_IA32_APICBASE:
+#ifdef CONFIG_X86_X2APIC
+ if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31))))
+#endif
+ val &= ~X2APIC_ENABLE;
+ break;
+ }
+ return val;
+}
+
static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
{
int ret;
@@ -1240,7 +1257,7 @@
.wbinvd = native_wbinvd,
- .read_msr = native_read_msr_safe,
+ .read_msr = xen_read_msr_safe,
.write_msr = xen_write_msr_safe,
.read_tsc = native_read_tsc,
@@ -1741,6 +1758,7 @@
#ifdef CONFIG_X86_32
i386_start_kernel();
#else
+ cr4_init_shadow(); /* 32b kernel does this in i386_start_kernel() */
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}
diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c
index b64bccb..ceb32dd 100644
--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -482,6 +482,7 @@
}
}
+#ifdef CONFIG_BLK_DEV_INTEGRITY
static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi)
{
if (be32_to_cpu(pi->ref_tag) == v)
@@ -538,6 +539,58 @@
kunmap_atomic(pmap);
}
+static int nvme_noop_verify(struct blk_integrity_iter *iter)
+{
+ return 0;
+}
+
+static int nvme_noop_generate(struct blk_integrity_iter *iter)
+{
+ return 0;
+}
+
+struct blk_integrity nvme_meta_noop = {
+ .name = "NVME_META_NOOP",
+ .generate_fn = nvme_noop_generate,
+ .verify_fn = nvme_noop_verify,
+};
+
+static void nvme_init_integrity(struct nvme_ns *ns)
+{
+ struct blk_integrity integrity;
+
+ switch (ns->pi_type) {
+ case NVME_NS_DPS_PI_TYPE3:
+ integrity = t10_pi_type3_crc;
+ break;
+ case NVME_NS_DPS_PI_TYPE1:
+ case NVME_NS_DPS_PI_TYPE2:
+ integrity = t10_pi_type1_crc;
+ break;
+ default:
+ integrity = nvme_meta_noop;
+ break;
+ }
+ integrity.tuple_size = ns->ms;
+ blk_integrity_register(ns->disk, &integrity);
+ blk_queue_max_integrity_segments(ns->queue, 1);
+}
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+static void nvme_dif_remap(struct request *req,
+ void (*dif_swap)(u32 p, u32 v, struct t10_pi_tuple *pi))
+{
+}
+static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi)
+{
+}
+static void nvme_dif_complete(u32 p, u32 v, struct t10_pi_tuple *pi)
+{
+}
+static void nvme_init_integrity(struct nvme_ns *ns)
+{
+}
+#endif
+
static void req_completion(struct nvme_queue *nvmeq, void *ctx,
struct nvme_completion *cqe)
{
@@ -1959,43 +2012,6 @@
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, ns->queue);
}
-static int nvme_noop_verify(struct blk_integrity_iter *iter)
-{
- return 0;
-}
-
-static int nvme_noop_generate(struct blk_integrity_iter *iter)
-{
- return 0;
-}
-
-struct blk_integrity nvme_meta_noop = {
- .name = "NVME_META_NOOP",
- .generate_fn = nvme_noop_generate,
- .verify_fn = nvme_noop_verify,
-};
-
-static void nvme_init_integrity(struct nvme_ns *ns)
-{
- struct blk_integrity integrity;
-
- switch (ns->pi_type) {
- case NVME_NS_DPS_PI_TYPE3:
- integrity = t10_pi_type3_crc;
- break;
- case NVME_NS_DPS_PI_TYPE1:
- case NVME_NS_DPS_PI_TYPE2:
- integrity = t10_pi_type1_crc;
- break;
- default:
- integrity = nvme_meta_noop;
- break;
- }
- integrity.tuple_size = ns->ms;
- blk_integrity_register(ns->disk, &integrity);
- blk_queue_max_integrity_segments(ns->queue, 1);
-}
-
static int nvme_revalidate_disk(struct gendisk *disk)
{
struct nvme_ns *ns = disk->private_data;
@@ -2036,7 +2052,8 @@
pi_type = ns->ms == sizeof(struct t10_pi_tuple) ?
id->dps & NVME_NS_DPS_PI_MASK : 0;
- if (disk->integrity && (ns->pi_type != pi_type || ns->ms != old_ms ||
+ if (blk_get_integrity(disk) && (ns->pi_type != pi_type ||
+ ns->ms != old_ms ||
bs != queue_logical_block_size(disk->queue) ||
(ns->ms && id->flbas & NVME_NS_FLBAS_META_EXT)))
blk_integrity_unregister(disk);
@@ -2044,11 +2061,11 @@
ns->pi_type = pi_type;
blk_queue_logical_block_size(ns->queue, bs);
- if (ns->ms && !disk->integrity && (disk->flags & GENHD_FL_UP) &&
+ if (ns->ms && !blk_get_integrity(disk) && (disk->flags & GENHD_FL_UP) &&
!(id->flbas & NVME_NS_FLBAS_META_EXT))
nvme_init_integrity(ns);
- if (id->ncap == 0 || (ns->ms && !disk->integrity))
+ if (id->ncap == 0 || (ns->ms && !blk_get_integrity(disk)))
set_capacity(disk, 0);
else
set_capacity(disk, le64_to_cpup(&id->nsze) << (ns->lba_shift - 9));
@@ -2652,7 +2669,7 @@
list_for_each_entry(ns, &dev->namespaces, list) {
if (ns->disk->flags & GENHD_FL_UP) {
- if (ns->disk->integrity)
+ if (blk_get_integrity(ns->disk))
blk_integrity_unregister(ns->disk);
del_gendisk(ns->disk);
}
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 8e233ed..871bd35 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -528,7 +528,7 @@
static inline void update_used_max(struct zram *zram,
const unsigned long pages)
{
- int old_max, cur_max;
+ unsigned long old_max, cur_max;
old_max = atomic_long_read(&zram->stats.max_used_pages);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 1c2506f..68161f7 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -63,6 +63,11 @@
config CADENCE_TTC_TIMER
bool
+config ASM9260_TIMER
+ bool
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
@@ -245,15 +250,4 @@
help
This enables OST0 support available on PXA and SA-11x0
platforms.
-
-config ASM9260_TIMER
- bool "Alphascale ASM9260 timer driver"
- depends on GENERIC_CLOCKEVENTS
- select CLKSRC_MMIO
- select CLKSRC_OF
- default y if MACH_ASM9260
- help
- This enables build of a clocksource and clockevent driver for
- the 32-bit System Timer hardware available on a Alphascale ASM9260.
-
endmenu
diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 32a3d25..68ab423 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -224,6 +224,8 @@
}
rate = clk_get_rate(clk);
+ mtk_timer_global_reset(evt);
+
if (request_irq(evt->dev.irq, mtk_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
pr_warn("failed to setup irq %d\n", evt->dev.irq);
@@ -232,8 +234,6 @@
evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
- mtk_timer_global_reset(evt);
-
/* Configure clock source */
mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
@@ -241,10 +241,11 @@
/* Configure clock event */
mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);
- mtk_timer_enable_irq(evt, GPT_CLK_EVT);
-
clockevents_config_and_register(&evt->dev, rate, 0x3,
0xffffffff);
+
+ mtk_timer_enable_irq(evt, GPT_CLK_EVT);
+
return;
err_clk_disable:
diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c
index 941f3f3..d9438af 100644
--- a/drivers/clocksource/pxa_timer.c
+++ b/drivers/clocksource/pxa_timer.c
@@ -163,7 +163,7 @@
.dev_id = &ckevt_pxa_osmr0,
};
-static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
+static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
{
timer_writel(0, OIER);
timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
index 472fb5b..9cdbc0c 100644
--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -26,9 +26,12 @@
struct gpio_chip gpio_chip;
};
+#define to_tgd(gc) container_of(gc, struct tps65912_gpio_data, gpio_chip)
+
static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
int val;
val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset);
@@ -42,7 +45,8 @@
static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
int value)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
if (value)
tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
@@ -55,7 +59,8 @@
static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
int value)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
/* Set the initial value */
tps65912_gpio_set(gc, offset, value);
@@ -66,7 +71,8 @@
static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset)
{
- struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+ struct tps65912 *tps65912 = tps65912_gpio->tps65912;
return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
GPIO_CFG_MASK);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 8cad8e4..4650bf8 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -46,12 +46,13 @@
ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags);
if (ret < 0) {
- /* We've found the gpio chip, but the translation failed.
- * Return true to stop looking and return the translation
- * error via out_gpio
+ /* We've found a gpio chip, but the translation failed.
+ * Store translation error in out_gpio.
+ * Return false to keep looking, as more than one gpio chip
+ * could be registered per of-node.
*/
gg_data->out_gpio = ERR_PTR(ret);
- return true;
+ return false;
}
gg_data->out_gpio = gpiochip_get_desc(gc, ret);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index b3589d0..910ff8a 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -62,12 +62,18 @@
return KFD_MQD_TYPE_CP;
}
-static inline unsigned int get_first_pipe(struct device_queue_manager *dqm)
+unsigned int get_first_pipe(struct device_queue_manager *dqm)
{
- BUG_ON(!dqm);
+ BUG_ON(!dqm || !dqm->dev);
return dqm->dev->shared_resources.first_compute_pipe;
}
+unsigned int get_pipes_num(struct device_queue_manager *dqm)
+{
+ BUG_ON(!dqm || !dqm->dev);
+ return dqm->dev->shared_resources.compute_pipe_count;
+}
+
static inline unsigned int get_pipes_num_cpsch(void)
{
return PIPE_PER_ME_CP_SCHEDULING;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index d64f86c..488f51d 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -163,6 +163,8 @@
struct qcm_process_device *qpd);
int init_pipelines(struct device_queue_manager *dqm,
unsigned int pipes_num, unsigned int first_pipe);
+unsigned int get_first_pipe(struct device_queue_manager *dqm);
+unsigned int get_pipes_num(struct device_queue_manager *dqm);
extern inline unsigned int get_sh_mem_bases_32(struct kfd_process_device *pdd)
{
@@ -175,10 +177,4 @@
return (pdd->lds_base >> 60) & 0x0E;
}
-extern inline unsigned int get_pipes_num(struct device_queue_manager *dqm)
-{
- BUG_ON(!dqm || !dqm->dev);
- return dqm->dev->shared_resources.compute_pipe_count;
-}
-
#endif /* KFD_DEVICE_QUEUE_MANAGER_H_ */
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c
index 6b07246..5469efe 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c
@@ -131,5 +131,5 @@
static int initialize_cpsch_cik(struct device_queue_manager *dqm)
{
- return init_pipelines(dqm, get_pipes_num(dqm), 0);
+ return init_pipelines(dqm, get_pipes_num(dqm), get_first_pipe(dqm));
}
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 0409b90..b3e3068 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -153,7 +153,7 @@
(adj->crtc_hdisplay - 1) |
((adj->crtc_vdisplay - 1) << 16));
- cfg = ATMEL_HLCDC_CLKPOL;
+ cfg = 0;
prate = clk_get_rate(crtc->dc->hlcdc->sys_clk);
mode_rate = mode->crtc_clock * 1000;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 7320a6c..c1cb174 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -311,8 +311,6 @@
pm_runtime_enable(dev->dev);
- pm_runtime_put_sync(dev->dev);
-
ret = atmel_hlcdc_dc_modeset_init(dev);
if (ret < 0) {
dev_err(dev->dev, "failed to initialize mode setting\n");
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
index 063d2a7..e79bd9b 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
@@ -311,7 +311,8 @@
/* Disable the layer */
regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST);
+ ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q |
+ ATMEL_HLCDC_LAYER_UPDATE);
/* Clear all pending interrupts */
regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 6b00173..6b6b07f 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2127,7 +2127,6 @@
DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id);
mutex_lock(&dev->mode_config.mutex);
- drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
connector = drm_connector_find(dev, out_resp->connector_id);
if (!connector) {
@@ -2157,6 +2156,8 @@
out_resp->mm_height = connector->display_info.height_mm;
out_resp->subpixel = connector->display_info.subpixel_order;
out_resp->connection = connector->status;
+
+ drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
encoder = drm_connector_get_encoder(connector);
if (encoder)
out_resp->encoder_id = encoder->base.id;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f2a825e..8727086 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2114,6 +2114,9 @@
* number comparisons on buffer last_read|write_seqno. It also allows an
* emission time to be associated with the request for tracking how far ahead
* of the GPU the submission is.
+ *
+ * The requests are reference counted, so upon creation they should have an
+ * initial reference taken using kref_init
*/
struct drm_i915_gem_request {
struct kref ref;
@@ -2137,7 +2140,16 @@
/** Position in the ringbuffer of the end of the whole request */
u32 tail;
- /** Context related to this request */
+ /**
+ * Context related to this request
+ * Contexts are refcounted, so when this request is associated with a
+ * context, we must increment the context's refcount, to guarantee that
+ * it persists while any request is linked to it. Requests themselves
+ * are also refcounted, so the request will only be freed when the last
+ * reference to it is dismissed, and the code in
+ * i915_gem_request_free() will then decrement the refcount on the
+ * context.
+ */
struct intel_context *ctx;
/** Batch buffer related to this request if any */
@@ -2374,6 +2386,7 @@
(INTEL_DEVID(dev) & 0xFF00) == 0x0C00)
#define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \
((INTEL_DEVID(dev) & 0xf) == 0x6 || \
+ (INTEL_DEVID(dev) & 0xf) == 0xb || \
(INTEL_DEVID(dev) & 0xf) == 0xe))
#define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \
(INTEL_DEVID(dev) & 0x00F0) == 0x0020)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index c26d36c..e5daad5 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2659,8 +2659,7 @@
if (submit_req->ctx != ring->default_context)
intel_lr_context_unpin(ring, submit_req->ctx);
- i915_gem_context_unreference(submit_req->ctx);
- kfree(submit_req);
+ i915_gem_request_unreference(submit_req);
}
/*
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index a204584..9c6f93e 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -485,10 +485,8 @@
stolen_offset, gtt_offset, size);
/* KISS and expect everything to be page-aligned */
- BUG_ON(stolen_offset & 4095);
- BUG_ON(size & 4095);
-
- if (WARN_ON(size == 0))
+ if (WARN_ON(size == 0) || WARN_ON(size & 4095) ||
+ WARN_ON(stolen_offset & 4095))
return NULL;
stolen = kzalloc(sizeof(*stolen), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 7a24bd1..6377b22 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -335,9 +335,10 @@
return -EINVAL;
}
+ mutex_lock(&dev->struct_mutex);
if (i915_gem_obj_is_pinned(obj) || obj->framebuffer_references) {
- drm_gem_object_unreference_unlocked(&obj->base);
- return -EBUSY;
+ ret = -EBUSY;
+ goto err;
}
if (args->tiling_mode == I915_TILING_NONE) {
@@ -369,7 +370,6 @@
}
}
- mutex_lock(&dev->struct_mutex);
if (args->tiling_mode != obj->tiling_mode ||
args->stride != obj->stride) {
/* We need to rebind the object if its current allocation
@@ -424,6 +424,7 @@
obj->bit_17 = NULL;
}
+err:
drm_gem_object_unreference(&obj->base);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4145d95..ede5bbb 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1892,6 +1892,9 @@
u32 iir, gt_iir, pm_iir;
irqreturn_t ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
while (true) {
/* Find, clear, then process each source of interrupt */
@@ -1936,6 +1939,9 @@
u32 master_ctl, iir;
irqreturn_t ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
for (;;) {
master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL;
iir = I915_READ(VLV_IIR);
@@ -2208,6 +2214,9 @@
u32 de_iir, gt_iir, de_ier, sde_ier = 0;
irqreturn_t ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
/* We get interrupts on unclaimed registers, so check for this before we
* do any I915_{READ,WRITE}. */
intel_uncore_check_errors(dev);
@@ -2279,6 +2288,9 @@
enum pipe pipe;
u32 aux_mask = GEN8_AUX_CHANNEL_A;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
if (IS_GEN9(dev))
aux_mask |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C |
GEN9_AUX_CHANNEL_D;
@@ -3771,6 +3783,9 @@
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
iir = I915_READ16(IIR);
if (iir == 0)
return IRQ_NONE;
@@ -3951,6 +3966,9 @@
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
int pipe, ret = IRQ_NONE;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
iir = I915_READ(IIR);
do {
bool irq_received = (iir & ~flip_mask) != 0;
@@ -4171,6 +4189,9 @@
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+ if (!intel_irqs_enabled(dev_priv))
+ return IRQ_NONE;
+
iir = I915_READ(IIR);
for (;;) {
@@ -4520,6 +4541,7 @@
{
dev_priv->dev->driver->irq_uninstall(dev_priv->dev);
dev_priv->pm.irqs_enabled = false;
+ synchronize_irq(dev_priv->dev->irq);
}
/**
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3d220a6..e730789 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2371,13 +2371,19 @@
struct drm_device *dev = crtc->base.dev;
struct drm_i915_gem_object *obj = NULL;
struct drm_mode_fb_cmd2 mode_cmd = { 0 };
- u32 base = plane_config->base;
+ u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
+ u32 size_aligned = round_up(plane_config->base + plane_config->size,
+ PAGE_SIZE);
+
+ size_aligned -= base_aligned;
if (plane_config->size == 0)
return false;
- obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base,
- plane_config->size);
+ obj = i915_gem_object_create_stolen_for_preallocated(dev,
+ base_aligned,
+ base_aligned,
+ size_aligned);
if (!obj)
return false;
@@ -2725,10 +2731,19 @@
case DRM_FORMAT_XRGB8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
break;
+ case DRM_FORMAT_ARGB8888:
+ plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+ plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ break;
case DRM_FORMAT_XBGR8888:
plane_ctl |= PLANE_CTL_ORDER_RGBX;
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
break;
+ case DRM_FORMAT_ABGR8888:
+ plane_ctl |= PLANE_CTL_ORDER_RGBX;
+ plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+ plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ break;
case DRM_FORMAT_XRGB2101010:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
break;
@@ -6627,7 +6642,7 @@
aligned_height = intel_fb_align_height(dev, fb->height,
plane_config->tiling);
- plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height);
+ plane_config->size = fb->pitches[0] * aligned_height;
DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
pipe_name(pipe), plane, fb->width, fb->height,
@@ -7664,7 +7679,7 @@
aligned_height = intel_fb_align_height(dev, fb->height,
plane_config->tiling);
- plane_config->size = ALIGN(fb->pitches[0] * aligned_height, PAGE_SIZE);
+ plane_config->size = fb->pitches[0] * aligned_height;
DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
pipe_name(pipe), fb->width, fb->height,
@@ -7755,7 +7770,7 @@
aligned_height = intel_fb_align_height(dev, fb->height,
plane_config->tiling);
- plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height);
+ plane_config->size = fb->pitches[0] * aligned_height;
DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
pipe_name(pipe), fb->width, fb->height,
@@ -8698,6 +8713,7 @@
old->release_fb->funcs->destroy(old->release_fb);
goto fail;
}
+ crtc->primary->crtc = crtc;
/* let the connector get through one full cycle before testing */
intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -12182,9 +12198,6 @@
return -ENOMEM;
}
- if (fb == crtc->cursor->fb)
- return 0;
-
/* we only need to pin inside GTT if cursor is non-phy */
mutex_lock(&dev->struct_mutex);
if (!INTEL_INFO(dev)->cursor_needs_physical && obj->tiling_mode) {
@@ -13096,6 +13109,9 @@
/* HP Chromebook 14 (Celeron 2955U) */
{ 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
+
+ /* Dell Chromebook 11 */
+ { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
};
static void intel_init_quirks(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 0f358c5..e8d3da9 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -503,18 +503,19 @@
* If there isn't a request associated with this submission,
* create one as a temporary holder.
*/
- WARN(1, "execlist context submission without request");
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request == NULL)
return -ENOMEM;
request->ring = ring;
request->ctx = to;
+ kref_init(&request->ref);
+ request->uniq = dev_priv->request_uniq++;
+ i915_gem_context_reference(request->ctx);
} else {
+ i915_gem_request_reference(request);
WARN_ON(to != request->ctx);
}
request->tail = tail;
- i915_gem_request_reference(request);
- i915_gem_context_reference(request->ctx);
intel_runtime_pm_get(dev_priv);
@@ -731,7 +732,6 @@
if (ctx_obj && (ctx != ring->default_context))
intel_lr_context_unpin(ring, ctx);
intel_runtime_pm_put(dev_priv);
- i915_gem_context_unreference(ctx);
list_del(&req->execlist_link);
i915_gem_request_unreference(req);
}
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 5bf825d..8d74de8 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -178,6 +178,13 @@
switch (msg->request & ~DP_AUX_I2C_MOT) {
case DP_AUX_NATIVE_WRITE:
case DP_AUX_I2C_WRITE:
+ /* The atom implementation only supports writes with a max payload of
+ * 12 bytes since it uses 4 bits for the total count (header + payload)
+ * in the parameter space. The atom interface supports 16 byte
+ * payloads for reads. The hw itself supports up to 16 bytes of payload.
+ */
+ if (WARN_ON_ONCE(msg->size > 12))
+ return -E2BIG;
/* tx_size needs to be 4 even for bare address packets since the atom
* table needs the info in tx_buf[3].
*/
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 7c9df1e..7fe7b74 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -731,7 +731,9 @@
dig_connector = radeon_connector->con_priv;
if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
(dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) {
- if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
+ if (radeon_audio != 0 &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)) &&
+ ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
return ATOM_ENCODER_MODE_DP_AUDIO;
return ATOM_ENCODER_MODE_DP;
} else if (radeon_audio != 0) {
@@ -747,7 +749,9 @@
}
break;
case DRM_MODE_CONNECTOR_eDP:
- if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
+ if (radeon_audio != 0 &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)) &&
+ ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev))
return ATOM_ENCODER_MODE_DP_AUDIO;
return ATOM_ENCODER_MODE_DP;
case DRM_MODE_CONNECTOR_DVIA:
@@ -1720,8 +1724,10 @@
}
encoder_mode = atombios_get_encoder_mode(encoder);
- if (radeon_audio != 0 &&
- (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode)))
+ if (connector && (radeon_audio != 0) &&
+ ((encoder_mode == ATOM_ENCODER_MODE_HDMI) ||
+ (ENCODER_MODE_IS_DP(encoder_mode) &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)))))
radeon_audio_dpms(encoder, mode);
}
@@ -2136,6 +2142,7 @@
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
int encoder_mode;
radeon_encoder->pixel_clock = adjusted_mode->clock;
@@ -2164,8 +2171,10 @@
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
/* handled in dpms */
encoder_mode = atombios_get_encoder_mode(encoder);
- if (radeon_audio != 0 &&
- (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode)))
+ if (connector && (radeon_audio != 0) &&
+ ((encoder_mode == ATOM_ENCODER_MODE_HDMI) ||
+ (ENCODER_MODE_IS_DP(encoder_mode) &&
+ drm_detect_monitor_audio(radeon_connector_edid(connector)))))
radeon_audio_mode_set(encoder, adjusted_mode);
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index e6a4ba2..0c993da 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -3613,6 +3613,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 0x1);
+ WREG32(SRBM_INT_ACK, 0x1);
WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN);
@@ -7230,6 +7232,8 @@
WREG32(CP_ME2_PIPE3_INT_CNTL, 0);
/* grbm */
WREG32(GRBM_INT_CNTL, 0);
+ /* SRBM */
+ WREG32(SRBM_INT_CNTL, 0);
/* vline/vblank, etc. */
WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
@@ -8046,6 +8050,10 @@
break;
}
break;
+ case 96:
+ DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR));
+ WREG32(SRBM_INT_ACK, 0x1);
+ break;
case 124: /* UVD */
DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h
index 03003f8..c648e19 100644
--- a/drivers/gpu/drm/radeon/cikd.h
+++ b/drivers/gpu/drm/radeon/cikd.h
@@ -482,6 +482,10 @@
#define SOFT_RESET_ORB (1 << 23)
#define SOFT_RESET_VCE (1 << 24)
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
#define VM_L2_CNTL 0x1400
#define ENABLE_L2_CACHE (1 << 0)
#define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 78600f5..4c0e24b 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3253,6 +3253,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 0x1);
+ WREG32(SRBM_INT_ACK, 0x1);
evergreen_fix_pci_max_read_req_size(rdev);
@@ -4324,6 +4326,7 @@
tmp = RREG32(DMA_CNTL) & ~TRAP_ENABLE;
WREG32(DMA_CNTL, tmp);
WREG32(GRBM_INT_CNTL, 0);
+ WREG32(SRBM_INT_CNTL, 0);
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
if (rdev->num_crtc >= 4) {
@@ -5066,6 +5069,10 @@
DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
+ case 96:
+ DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR));
+ WREG32(SRBM_INT_ACK, 0x1);
+ break;
case 124: /* UVD */
DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index ee83d2a..a8d1d52 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -1191,6 +1191,10 @@
#define SOFT_RESET_REGBB (1 << 22)
#define SOFT_RESET_ORB (1 << 23)
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
/* display watermarks */
#define DC_LB_MEMORY_SPLIT 0x6b0c
#define PRIORITY_A_CNT 0x6b18
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 24242a7..dab00812 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -962,6 +962,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 0x1);
+ WREG32(SRBM_INT_ACK, 0x1);
evergreen_fix_pci_max_read_req_size(rdev);
@@ -1086,12 +1088,12 @@
if ((rdev->config.cayman.max_backends_per_se == 1) &&
(rdev->flags & RADEON_IS_IGP)) {
- if ((disabled_rb_mask & 3) == 1) {
- /* RB0 disabled, RB1 enabled */
- tmp = 0x11111111;
- } else {
+ if ((disabled_rb_mask & 3) == 2) {
/* RB1 disabled, RB0 enabled */
tmp = 0x00000000;
+ } else {
+ /* RB0 disabled, RB1 enabled */
+ tmp = 0x11111111;
}
} else {
tmp = gb_addr_config & NUM_PIPES_MASK;
diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h
index ad71254..6b44580 100644
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -82,6 +82,10 @@
#define SOFT_RESET_REGBB (1 << 22)
#define SOFT_RESET_ORB (1 << 23)
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
#define SRBM_STATUS2 0x0EC4
#define DMA_BUSY (1 << 5)
#define DMA1_BUSY (1 << 6)
diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c
index 843b65f..fa21544 100644
--- a/drivers/gpu/drm/radeon/r600_dpm.c
+++ b/drivers/gpu/drm/radeon/r600_dpm.c
@@ -188,7 +188,7 @@
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
radeon_crtc = to_radeon_crtc(crtc);
if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
- vrefresh = radeon_crtc->hw_mode.vrefresh;
+ vrefresh = drm_mode_vrefresh(&radeon_crtc->hw_mode);
break;
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index c830863..a579ed3 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -715,6 +715,7 @@
struct radeon_cs_chunk *ib_chunk = p->chunk_ib;
struct radeon_device *rdev = p->rdev;
uint32_t header;
+ int ret = 0, i;
if (idx >= ib_chunk->length_dw) {
DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
@@ -743,14 +744,25 @@
break;
default:
DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx);
- return -EINVAL;
+ ret = -EINVAL;
+ goto dump_ib;
}
if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) {
DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n",
pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw);
- return -EINVAL;
+ ret = -EINVAL;
+ goto dump_ib;
}
return 0;
+
+dump_ib:
+ for (i = 0; i < ib_chunk->length_dw; i++) {
+ if (i == idx)
+ printk("\t0x%08x <---\n", radeon_get_ib_value(p, i));
+ else
+ printk("\t0x%08x\n", radeon_get_ib_value(p, i));
+ }
+ return ret;
}
/**
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 6b670b0..3a29703 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -179,9 +179,12 @@
(rdev->pdev->subsystem_vendor == 0x1734) &&
(rdev->pdev->subsystem_device == 0x1107))
use_bl = false;
+/* Older PPC macs use on-GPU backlight controller */
+#ifndef CONFIG_PPC_PMAC
/* disable native backlight control on older asics */
else if (rdev->family < CHIP_R600)
use_bl = false;
+#endif
else
use_bl = true;
}
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 9f758d3..33cf410 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -852,6 +852,12 @@
single_display = false;
}
+ /* 120hz tends to be problematic even if they are under the
+ * vblank limit.
+ */
+ if (single_display && (r600_dpm_get_vrefresh(rdev) >= 120))
+ single_display = false;
+
/* certain older asics have a separare 3D performance state,
* so try that first if the user selected performance
*/
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 73107fe..bcf516a 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -3162,6 +3162,8 @@
}
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ WREG32(SRBM_INT_CNTL, 1);
+ WREG32(SRBM_INT_ACK, 1);
evergreen_fix_pci_max_read_req_size(rdev);
@@ -4699,12 +4701,6 @@
switch (pkt.type) {
case RADEON_PACKET_TYPE0:
dev_err(rdev->dev, "Packet0 not allowed!\n");
- for (i = 0; i < ib->length_dw; i++) {
- if (i == idx)
- printk("\t0x%08x <---\n", ib->ptr[i]);
- else
- printk("\t0x%08x\n", ib->ptr[i]);
- }
ret = -EINVAL;
break;
case RADEON_PACKET_TYPE2:
@@ -4736,8 +4732,15 @@
ret = -EINVAL;
break;
}
- if (ret)
+ if (ret) {
+ for (i = 0; i < ib->length_dw; i++) {
+ if (i == idx)
+ printk("\t0x%08x <---\n", ib->ptr[i]);
+ else
+ printk("\t0x%08x\n", ib->ptr[i]);
+ }
break;
+ }
} while (idx < ib->length_dw);
return ret;
@@ -5910,6 +5913,7 @@
tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp);
WREG32(GRBM_INT_CNTL, 0);
+ WREG32(SRBM_INT_CNTL, 0);
if (rdev->num_crtc >= 2) {
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
@@ -6609,6 +6613,10 @@
break;
}
break;
+ case 96:
+ DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR));
+ WREG32(SRBM_INT_ACK, 0x1);
+ break;
case 124: /* UVD */
DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index cbd91d2..c27118c 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -358,6 +358,10 @@
#define CC_SYS_RB_BACKEND_DISABLE 0xe80
#define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84
+#define SRBM_READ_ERROR 0xE98
+#define SRBM_INT_CNTL 0xEA0
+#define SRBM_INT_ACK 0xEA8
+
#define SRBM_STATUS2 0x0EC4
#define DMA_BUSY (1 << 5)
#define DMA1_BUSY (1 << 6)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 3aaa84a..1a52522 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -997,8 +997,10 @@
crtc->state = NULL;
state = kzalloc(sizeof(*state), GFP_KERNEL);
- if (state)
+ if (state) {
crtc->state = &state->base;
+ crtc->state->crtc = crtc;
+ }
}
static struct drm_crtc_state *
@@ -1012,6 +1014,7 @@
return NULL;
copy->base.mode_changed = false;
+ copy->base.active_changed = false;
copy->base.planes_changed = false;
copy->base.event = NULL;
@@ -1227,9 +1230,6 @@
/* program display mode */
tegra_dc_set_timings(dc, mode);
- if (dc->soc->supports_border_color)
- tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR);
-
/* interlacing isn't supported yet, so disable it */
if (dc->soc->supports_interlacing) {
value = tegra_dc_readl(dc, DC_DISP_INTERLACE_CONTROL);
@@ -1252,42 +1252,7 @@
static void tegra_crtc_prepare(struct drm_crtc *crtc)
{
- struct tegra_dc *dc = to_tegra_dc(crtc);
- unsigned int syncpt;
- unsigned long value;
-
drm_crtc_vblank_off(crtc);
-
- if (dc->pipe)
- syncpt = SYNCPT_VBLANK1;
- else
- syncpt = SYNCPT_VBLANK0;
-
- /* initialize display controller */
- tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL);
- tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC);
-
- value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_TYPE);
-
- value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
- WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);
-
- /* initialize timer */
- value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) |
- WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20);
- tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY);
-
- value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) |
- WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1);
- tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER);
-
- value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE);
-
- value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
- tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
}
static void tegra_crtc_commit(struct drm_crtc *crtc)
@@ -1664,6 +1629,8 @@
struct tegra_drm *tegra = drm->dev_private;
struct drm_plane *primary = NULL;
struct drm_plane *cursor = NULL;
+ unsigned int syncpt;
+ u32 value;
int err;
if (tegra->domain) {
@@ -1730,6 +1697,40 @@
goto cleanup;
}
+ /* initialize display controller */
+ if (dc->pipe)
+ syncpt = SYNCPT_VBLANK1;
+ else
+ syncpt = SYNCPT_VBLANK0;
+
+ tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL);
+ tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC);
+
+ value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_TYPE);
+
+ value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
+ WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);
+
+ /* initialize timer */
+ value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) |
+ WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20);
+ tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY);
+
+ value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) |
+ WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1);
+ tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER);
+
+ value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE);
+
+ value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT;
+ tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
+
+ if (dc->soc->supports_border_color)
+ tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR);
+
return 0;
cleanup:
diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index 7e06657..7eaaee74 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -851,6 +851,14 @@
h_back_porch = mode->htotal - mode->hsync_end;
h_front_porch = mode->hsync_start - mode->hdisplay;
+ err = clk_set_rate(hdmi->clk, pclk);
+ if (err < 0) {
+ dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n",
+ err);
+ }
+
+ DRM_DEBUG_KMS("HDMI clock rate: %lu Hz\n", clk_get_rate(hdmi->clk));
+
/* power up sequence */
value = tegra_hdmi_readl(hdmi, HDMI_NV_PDISP_SOR_PLL0);
value &= ~SOR_PLL_PDBG;
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index db4fb6e..7c669c3 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1872,6 +1872,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE7K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
@@ -1926,6 +1927,7 @@
#endif
#if IS_ENABLED(CONFIG_HID_SAITEK)
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 46edb4d..204312b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -654,6 +654,7 @@
#define USB_DEVICE_ID_MS_LK6K 0x00f9
#define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701
#define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
+#define USB_DEVICE_ID_MS_NE7K 0x071d
#define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730
#define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c
#define USB_DEVICE_ID_MS_SURFACE_PRO_2 0x0799
@@ -802,6 +803,7 @@
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
#define USB_DEVICE_ID_SAITEK_PS1000 0x0621
+#define USB_DEVICE_ID_SAITEK_RAT7_OLD 0x0ccb
#define USB_DEVICE_ID_SAITEK_RAT7 0x0cd7
#define USB_DEVICE_ID_SAITEK_MMO7 0x0cd0
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index fbaea6e..af935eb 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -264,6 +264,8 @@
.driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP),
.driver_data = MS_ERGONOMY },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE7K),
+ .driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K),
.driver_data = MS_ERGONOMY | MS_RDESC },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB),
diff --git a/drivers/hid/hid-saitek.c b/drivers/hid/hid-saitek.c
index 5632c54..a014f21 100644
--- a/drivers/hid/hid-saitek.c
+++ b/drivers/hid/hid-saitek.c
@@ -177,6 +177,8 @@
static const struct hid_device_id saitek_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000),
.driver_data = SAITEK_FIX_PS1000 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD),
+ .driver_data = SAITEK_RELEASE_MODE_RAT7 },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7),
.driver_data = SAITEK_RELEASE_MODE_RAT7 },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9),
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 6a58b6c..e54ce10 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -135,8 +135,9 @@
{
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
+ unsigned long flags;
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
(collection_index >=
@@ -145,10 +146,11 @@
callback->hsdev->end_collection_index)) {
*priv = callback->priv;
*hsdev = callback->hsdev;
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock,
+ flags);
return callback->usage_callback;
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return NULL;
}
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 31e9d25..1896c01 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -804,7 +804,7 @@
#define DS4_REPORT_0x81_SIZE 7
#define SIXAXIS_REPORT_0xF2_SIZE 18
-static spinlock_t sony_dev_list_lock;
+static DEFINE_SPINLOCK(sony_dev_list_lock);
static LIST_HEAD(sony_device_list);
static DEFINE_IDA(sony_device_id_allocator);
@@ -1944,6 +1944,8 @@
return -ENOMEM;
}
+ spin_lock_init(&sc->lock);
+
sc->quirks = quirks;
hid_set_drvdata(hdev, sc);
sc->hdev = hdev;
@@ -2147,8 +2149,8 @@
{
dbg_hid("Sony:%s\n", __func__);
- ida_destroy(&sony_device_id_allocator);
hid_unregister_driver(&sony_driver);
+ ida_destroy(&sony_device_id_allocator);
}
module_init(sony_init);
module_exit(sony_exit);
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index d43e967..36053f3 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -370,7 +370,10 @@
static void i2c_hid_get_input(struct i2c_hid *ihid)
{
int ret, ret_size;
- int size = ihid->bufsize;
+ int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
+
+ if (size > ihid->bufsize)
+ size = ihid->bufsize;
ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
if (ret != size) {
@@ -785,7 +788,7 @@
dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);
ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, ihid);
if (ret < 0) {
dev_warn(&client->dev,
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 1a65079..046351c 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -778,6 +778,11 @@
input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4]));
input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6]));
input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8]));
+ if ((data[2] & 0x07) | data[4] | data[5] | data[6] | data[7] | data[8] | data[9]) {
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_abs(input, ABS_MISC, 0);
+ }
} else if (features->type == CINTIQ_HYBRID) {
/*
* Do not send hardware buttons under Android. They
@@ -2725,9 +2730,9 @@
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x32A =
- { "Wacom Cintiq 27QHD", 119740, 67520, 2047,
- 63, WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
- WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+ { "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63,
+ WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x32B =
{ "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63,
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index bce4e9f..6c99ee7 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -147,6 +147,9 @@
&ads2830_regmap_config);
}
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
data->cmd_byte = ext_vref ? ADS7828_CMD_PD1 : ADS7828_CMD_PD3;
if (!diff_input)
data->cmd_byte |= ADS7828_CMD_SD_SE;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c8d2bac..cadf9cc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2555,7 +2555,7 @@
return err ? err : len;
}
static struct rdev_sysfs_entry rdev_state =
-__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
+__ATTR_PREALLOC(state, S_IRUGO|S_IWUSR, state_show, state_store);
static ssize_t
errors_show(struct md_rdev *rdev, char *page)
@@ -3638,7 +3638,8 @@
return err ?: len;
}
static struct md_sysfs_entry md_resync_start =
-__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store);
+__ATTR_PREALLOC(resync_start, S_IRUGO|S_IWUSR,
+ resync_start_show, resync_start_store);
/*
* The array state can be:
@@ -3851,7 +3852,7 @@
return err ?: len;
}
static struct md_sysfs_entry md_array_state =
-__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
+__ATTR_PREALLOC(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
static ssize_t
max_corrected_read_errors_show(struct mddev *mddev, char *page) {
@@ -4101,7 +4102,7 @@
}
static struct md_sysfs_entry md_metadata =
-__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
+__ATTR_PREALLOC(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
static ssize_t
action_show(struct mddev *mddev, char *page)
@@ -4189,7 +4190,7 @@
}
static struct md_sysfs_entry md_scan_mode =
-__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
+__ATTR_PREALLOC(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
static ssize_t
last_sync_action_show(struct mddev *mddev, char *page)
@@ -4335,7 +4336,8 @@
return sprintf(page, "%llu / %llu\n", resync, max_sectors);
}
-static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed);
+static struct md_sysfs_entry md_sync_completed =
+ __ATTR_PREALLOC(sync_completed, S_IRUGO, sync_completed_show, NULL);
static ssize_t
min_sync_show(struct mddev *mddev, char *page)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 4153da5..d34e238 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -560,7 +560,7 @@
if (test_bit(WriteMostly, &rdev->flags)) {
/* Don't balance among write-mostly, just
* use the first as a last resort */
- if (best_disk < 0) {
+ if (best_dist_disk < 0) {
if (is_badblock(rdev, this_sector, sectors,
&first_bad, &bad_sectors)) {
if (first_bad < this_sector)
@@ -569,7 +569,8 @@
best_good_sectors = first_bad - this_sector;
} else
best_good_sectors = sectors;
- best_disk = disk;
+ best_dist_disk = disk;
+ best_pending_disk = disk;
}
continue;
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e75d48c..cd2f96b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5121,12 +5121,17 @@
schedule_timeout_uninterruptible(1);
}
/* Need to check if array will still be degraded after recovery/resync
- * We don't need to check the 'failed' flag as when that gets set,
- * recovery aborts.
+ * Note in case of > 1 drive failures it's possible we're rebuilding
+ * one drive while leaving another faulty drive in array.
*/
- for (i = 0; i < conf->raid_disks; i++)
- if (conf->disks[i].rdev == NULL)
+ rcu_read_lock();
+ for (i = 0; i < conf->raid_disks; i++) {
+ struct md_rdev *rdev = ACCESS_ONCE(conf->disks[i].rdev);
+
+ if (rdev == NULL || test_bit(Faulty, &rdev->flags))
still_degraded = 1;
+ }
+ rcu_read_unlock();
bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded);
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 8c3bfcb..803869c 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -399,21 +399,21 @@
* of this RTC chip. We check for it anyways in case support is
* added in the future.
*/
- if (unlikely((seconds >= 0xc0) && (seconds <= 0xff)))
+ if (unlikely(seconds >= 0xc0))
alrm->time.tm_sec = -1;
else
alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
RTC_SECS_BCD_MASK,
RTC_SECS_BIN_MASK);
- if (unlikely((minutes >= 0xc0) && (minutes <= 0xff)))
+ if (unlikely(minutes >= 0xc0))
alrm->time.tm_min = -1;
else
alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
RTC_MINS_BCD_MASK,
RTC_MINS_BIN_MASK);
- if (unlikely((hours >= 0xc0) && (hours <= 0xff)))
+ if (unlikely(hours >= 0xc0))
alrm->time.tm_hour = -1;
else
alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
@@ -472,13 +472,13 @@
* field, and we only support four fields. We put the support
* here anyways for the future.
*/
- if (unlikely((seconds >= 0xc0) && (seconds <= 0xff)))
+ if (unlikely(seconds >= 0xc0))
seconds = 0xff;
- if (unlikely((minutes >= 0xc0) && (minutes <= 0xff)))
+ if (unlikely(minutes >= 0xc0))
minutes = 0xff;
- if (unlikely((hours >= 0xc0) && (hours <= 0xff)))
+ if (unlikely(hours >= 0xc0))
hours = 0xff;
alrm->time.tm_mon = -1;
@@ -528,7 +528,6 @@
/* ----------------------------------------------------------------------- */
/* /dev/rtcX Interface functions */
-#ifdef CONFIG_RTC_INTF_DEV
/**
* ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off.
* @dev: pointer to device structure.
@@ -557,7 +556,6 @@
return 0;
}
-#endif
/* ----------------------------------------------------------------------- */
@@ -1612,7 +1610,7 @@
ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
/* Make sure we actually matched something. */
- if (!bcd_reg_info && !bin_reg_info)
+ if (!bcd_reg_info || !bin_reg_info)
return -EINVAL;
/* bcd_reg_info->reg == bin_reg_info->reg. */
@@ -1650,7 +1648,7 @@
return -EINVAL;
/* Make sure we actually matched something. */
- if (!bcd_reg_info && !bin_reg_info)
+ if (!bcd_reg_info || !bin_reg_info)
return -EINVAL;
/* Check for a valid range. */
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
index f3ee439d..cd4c293 100644
--- a/drivers/sh/pm_runtime.c
+++ b/drivers/sh/pm_runtime.c
@@ -81,7 +81,9 @@
if (!of_machine_is_compatible("renesas,emev2") &&
!of_machine_is_compatible("renesas,r7s72100") &&
!of_machine_is_compatible("renesas,r8a73a4") &&
+#ifndef CONFIG_PM_GENERIC_DOMAINS_OF
!of_machine_is_compatible("renesas,r8a7740") &&
+#endif
!of_machine_is_compatible("renesas,r8a7778") &&
!of_machine_is_compatible("renesas,r8a7779") &&
!of_machine_is_compatible("renesas,r8a7790") &&
diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c
index 25d244c..031018e 100644
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -262,13 +262,12 @@
result = acpi_parse_art(priv->adev->handle, &priv->art_count,
&priv->arts, true);
if (result)
- goto free_priv;
-
+ dev_dbg(&pdev->dev, "_ART table parsing error\n");
result = acpi_parse_trt(priv->adev->handle, &priv->trt_count,
&priv->trts, true);
if (result)
- goto free_art;
+ dev_dbg(&pdev->dev, "_TRT table parsing error\n");
platform_set_drvdata(pdev, priv);
@@ -281,7 +280,7 @@
&int3400_thermal_params, 0, 0);
if (IS_ERR(priv->thermal)) {
result = PTR_ERR(priv->thermal);
- goto free_trt;
+ goto free_art_trt;
}
priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add(
@@ -295,9 +294,8 @@
free_zone:
thermal_zone_device_unregister(priv->thermal);
-free_trt:
+free_art_trt:
kfree(priv->trts);
-free_art:
kfree(priv->arts);
free_priv:
kfree(priv);
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 6ceebd6..12623bc 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -688,6 +688,7 @@
{ X86_VENDOR_INTEL, 6, 0x45},
{ X86_VENDOR_INTEL, 6, 0x46},
{ X86_VENDOR_INTEL, 6, 0x4c},
+ { X86_VENDOR_INTEL, 6, 0x4d},
{ X86_VENDOR_INTEL, 6, 0x56},
{}
};
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 2580a48..fe4e767 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -387,21 +387,9 @@
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq) {
- int ret;
-
/*
* platform has IRQ support.
* Then, driver uses common registers
- */
-
- ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
- dev_name(dev), common);
- if (ret) {
- dev_err(dev, "irq request failed\n ");
- return ret;
- }
-
- /*
* rcar_has_irq_support() will be enabled
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
@@ -456,8 +444,16 @@
}
/* enable temperature comparation */
- if (irq)
+ if (irq) {
+ ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
+ dev_name(dev), common);
+ if (ret) {
+ dev_err(dev, "irq request failed\n ");
+ goto error_unregister;
+ }
+
rcar_thermal_common_write(common, ENR, enr_bits);
+ }
platform_set_drvdata(pdev, common);
@@ -467,9 +463,9 @@
error_unregister:
rcar_thermal_for_each_priv(priv, common) {
- thermal_zone_device_unregister(priv->zone);
if (rcar_has_irq_support(priv))
rcar_thermal_irq_disable(priv);
+ thermal_zone_device_unregister(priv->zone);
}
pm_runtime_put(dev);
@@ -485,9 +481,9 @@
struct rcar_thermal_priv *priv;
rcar_thermal_for_each_priv(priv, common) {
- thermal_zone_device_unregister(priv->zone);
if (rcar_has_irq_support(priv))
rcar_thermal_irq_disable(priv);
+ thermal_zone_device_unregister(priv->zone);
}
pm_runtime_put(dev);
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 933cd80..1fc54ab 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -918,34 +918,16 @@
}
static const struct of_device_id exynos_tmu_match[] = {
- {
- .compatible = "samsung,exynos3250-tmu",
- },
- {
- .compatible = "samsung,exynos4210-tmu",
- },
- {
- .compatible = "samsung,exynos4412-tmu",
- },
- {
- .compatible = "samsung,exynos5250-tmu",
- },
- {
- .compatible = "samsung,exynos5260-tmu",
- },
- {
- .compatible = "samsung,exynos5420-tmu",
- },
- {
- .compatible = "samsung,exynos5420-tmu-ext-triminfo",
- },
- {
- .compatible = "samsung,exynos5440-tmu",
- },
- {
- .compatible = "samsung,exynos7-tmu",
- },
- {},
+ { .compatible = "samsung,exynos3250-tmu", },
+ { .compatible = "samsung,exynos4210-tmu", },
+ { .compatible = "samsung,exynos4412-tmu", },
+ { .compatible = "samsung,exynos5250-tmu", },
+ { .compatible = "samsung,exynos5260-tmu", },
+ { .compatible = "samsung,exynos5420-tmu", },
+ { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
+ { .compatible = "samsung,exynos5440-tmu", },
+ { .compatible = "samsung,exynos7-tmu", },
+ { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..62a5d44 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1402,7 +1402,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
{
int i;
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 3fb054a..a38c175 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -429,7 +429,7 @@
data = ti_bandgap_get_sensor_data(bgp, id);
- if (data && data->cool_dev)
+ if (data)
cpufreq_cooling_unregister(data->cool_dev);
return 0;
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index 2140398..2ccd359 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -2,7 +2,7 @@
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
endif
obj-$(CONFIG_X86) += fallback.o
-obj-y += grant-table.o features.o balloon.o manage.o
+obj-y += grant-table.o features.o balloon.o manage.o preempt.o
obj-y += events/
obj-y += xenbus/
diff --git a/drivers/xen/preempt.c b/drivers/xen/preempt.c
new file mode 100644
index 0000000..a1800c1
--- /dev/null
+++ b/drivers/xen/preempt.c
@@ -0,0 +1,44 @@
+/*
+ * Preemptible hypercalls
+ *
+ * Copyright (C) 2014 Citrix Systems R&D ltd.
+ *
+ * This source code is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <xen/xen-ops.h>
+
+#ifndef CONFIG_PREEMPT
+
+/*
+ * Some hypercalls issued by the toolstack can take many 10s of
+ * seconds. Allow tasks running hypercalls via the privcmd driver to
+ * be voluntarily preempted even if full kernel preemption is
+ * disabled.
+ *
+ * Such preemptible hypercalls are bracketed by
+ * xen_preemptible_hcall_begin() and xen_preemptible_hcall_end()
+ * calls.
+ */
+
+DEFINE_PER_CPU(bool, xen_in_preemptible_hcall);
+EXPORT_SYMBOL_GPL(xen_in_preemptible_hcall);
+
+asmlinkage __visible void xen_maybe_preempt_hcall(void)
+{
+ if (unlikely(__this_cpu_read(xen_in_preemptible_hcall)
+ && should_resched())) {
+ /*
+ * Clear flag as we may be rescheduled on a different
+ * cpu.
+ */
+ __this_cpu_write(xen_in_preemptible_hcall, false);
+ _cond_resched();
+ __this_cpu_write(xen_in_preemptible_hcall, true);
+ }
+}
+#endif /* CONFIG_PREEMPT */
diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c
index 569a13b..59ac71c 100644
--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -56,10 +56,12 @@
if (copy_from_user(&hypercall, udata, sizeof(hypercall)))
return -EFAULT;
+ xen_preemptible_hcall_begin();
ret = privcmd_call(hypercall.op,
hypercall.arg[0], hypercall.arg[1],
hypercall.arg[2], hypercall.arg[3],
hypercall.arg[4]);
+ xen_preemptible_hcall_end();
return ret;
}
diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c
index 61653a0..9faca6a 100644
--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -709,12 +709,11 @@
static int scsiback_do_cmd_fn(struct vscsibk_info *info)
{
struct vscsiif_back_ring *ring = &info->ring;
- struct vscsiif_request *ring_req;
+ struct vscsiif_request ring_req;
struct vscsibk_pend *pending_req;
RING_IDX rc, rp;
int err, more_to_do;
uint32_t result;
- uint8_t act;
rc = ring->req_cons;
rp = ring->sring->req_prod;
@@ -735,11 +734,10 @@
if (!pending_req)
return 1;
- ring_req = RING_GET_REQUEST(ring, rc);
+ ring_req = *RING_GET_REQUEST(ring, rc);
ring->req_cons = ++rc;
- act = ring_req->act;
- err = prepare_pending_reqs(info, ring_req, pending_req);
+ err = prepare_pending_reqs(info, &ring_req, pending_req);
if (err) {
switch (err) {
case -ENODEV:
@@ -755,9 +753,9 @@
return 1;
}
- switch (act) {
+ switch (ring_req.act) {
case VSCSIIF_ACT_SCSI_CDB:
- if (scsiback_gnttab_data_map(ring_req, pending_req)) {
+ if (scsiback_gnttab_data_map(&ring_req, pending_req)) {
scsiback_fast_flush_area(pending_req);
scsiback_do_resp_with_sense(NULL,
DRIVER_ERROR << 24, 0, pending_req);
@@ -768,7 +766,7 @@
break;
case VSCSIIF_ACT_SCSI_ABORT:
scsiback_device_action(pending_req, TMR_ABORT_TASK,
- ring_req->ref_rqid);
+ ring_req.ref_rqid);
break;
case VSCSIIF_ACT_SCSI_RESET:
scsiback_device_action(pending_req, TMR_LUN_RESET, 0);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index cd4d131..8222f6f 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4903,10 +4903,17 @@
static struct btrfs_bio *alloc_btrfs_bio(int total_stripes, int real_stripes)
{
struct btrfs_bio *bbio = kzalloc(
+ /* the size of the btrfs_bio */
sizeof(struct btrfs_bio) +
+ /* plus the variable array for the stripes */
sizeof(struct btrfs_bio_stripe) * (total_stripes) +
+ /* plus the variable array for the tgt dev */
sizeof(int) * (real_stripes) +
- sizeof(u64) * (real_stripes),
+ /*
+ * plus the raid_map, which includes both the tgt dev
+ * and the stripes
+ */
+ sizeof(u64) * (total_stripes),
GFP_NOFS);
if (!bbio)
return NULL;
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index b2e3ff3..ecdbae1 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -31,6 +31,8 @@
#include "alloc.h"
#include "dat.h"
+static void __nilfs_btree_init(struct nilfs_bmap *bmap);
+
static struct nilfs_btree_path *nilfs_btree_alloc_path(void)
{
struct nilfs_btree_path *path;
@@ -368,6 +370,34 @@
return ret;
}
+/**
+ * nilfs_btree_root_broken - verify consistency of btree root node
+ * @node: btree root node to be examined
+ * @ino: inode number
+ *
+ * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned.
+ */
+static int nilfs_btree_root_broken(const struct nilfs_btree_node *node,
+ unsigned long ino)
+{
+ int level, flags, nchildren;
+ int ret = 0;
+
+ level = nilfs_btree_node_get_level(node);
+ flags = nilfs_btree_node_get_flags(node);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+
+ if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
+ level > NILFS_BTREE_LEVEL_MAX ||
+ nchildren < 0 ||
+ nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) {
+ pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n",
+ ino, level, flags, nchildren);
+ ret = 1;
+ }
+ return ret;
+}
+
int nilfs_btree_broken_node_block(struct buffer_head *bh)
{
int ret;
@@ -1713,7 +1743,7 @@
/* convert and insert */
dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL;
- nilfs_btree_init(btree);
+ __nilfs_btree_init(btree);
if (nreq != NULL) {
nilfs_bmap_commit_alloc_ptr(btree, dreq, dat);
nilfs_bmap_commit_alloc_ptr(btree, nreq, dat);
@@ -2294,12 +2324,23 @@
.bop_gather_data = NULL,
};
-int nilfs_btree_init(struct nilfs_bmap *bmap)
+static void __nilfs_btree_init(struct nilfs_bmap *bmap)
{
bmap->b_ops = &nilfs_btree_ops;
bmap->b_nchildren_per_block =
NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap));
- return 0;
+}
+
+int nilfs_btree_init(struct nilfs_bmap *bmap)
+{
+ int ret = 0;
+
+ __nilfs_btree_init(bmap);
+
+ if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap),
+ bmap->b_inode->i_ino))
+ ret = -EIO;
+ return ret;
}
void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index ce615d1..a2e1cb8 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -397,7 +397,8 @@
xfs_zero_last_block(
struct xfs_inode *ip,
xfs_fsize_t offset,
- xfs_fsize_t isize)
+ xfs_fsize_t isize,
+ bool *did_zeroing)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t last_fsb = XFS_B_TO_FSBT(mp, isize);
@@ -425,6 +426,7 @@
zero_len = mp->m_sb.sb_blocksize - zero_offset;
if (isize + zero_len > offset)
zero_len = offset - isize;
+ *did_zeroing = true;
return xfs_iozero(ip, isize, zero_len);
}
@@ -443,7 +445,8 @@
xfs_zero_eof(
struct xfs_inode *ip,
xfs_off_t offset, /* starting I/O offset */
- xfs_fsize_t isize) /* current inode size */
+ xfs_fsize_t isize, /* current inode size */
+ bool *did_zeroing)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t start_zero_fsb;
@@ -465,7 +468,7 @@
* We only zero a part of that block so it is handled specially.
*/
if (XFS_B_FSB_OFFSET(mp, isize) != 0) {
- error = xfs_zero_last_block(ip, offset, isize);
+ error = xfs_zero_last_block(ip, offset, isize, did_zeroing);
if (error)
return error;
}
@@ -525,6 +528,7 @@
if (error)
return error;
+ *did_zeroing = true;
start_zero_fsb = imap.br_startoff + imap.br_blockcount;
ASSERT(start_zero_fsb <= (end_zero_fsb + 1));
}
@@ -567,13 +571,15 @@
* having to redo all checks before.
*/
if (*pos > i_size_read(inode)) {
+ bool zero = false;
+
if (*iolock == XFS_IOLOCK_SHARED) {
xfs_rw_iunlock(ip, *iolock);
*iolock = XFS_IOLOCK_EXCL;
xfs_rw_ilock(ip, *iolock);
goto restart;
}
- error = xfs_zero_eof(ip, *pos, i_size_read(inode));
+ error = xfs_zero_eof(ip, *pos, i_size_read(inode), &zero);
if (error)
return error;
}
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index daafa1f..6163767 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2867,6 +2867,10 @@
* Handle RENAME_EXCHANGE flags
*/
if (flags & RENAME_EXCHANGE) {
+ if (target_ip == NULL) {
+ error = -EINVAL;
+ goto error_return;
+ }
error = xfs_cross_rename(tp, src_dp, src_name, src_ip,
target_dp, target_name, target_ip,
&free_list, &first_block, spaceres);
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 86cd6b3..a1cd55f 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -384,10 +384,11 @@
XFS_PREALLOC_INVISIBLE = (1 << 4),
};
-int xfs_update_prealloc_flags(struct xfs_inode *,
- enum xfs_prealloc_flags);
-int xfs_zero_eof(struct xfs_inode *, xfs_off_t, xfs_fsize_t);
-int xfs_iozero(struct xfs_inode *, loff_t, size_t);
+int xfs_update_prealloc_flags(struct xfs_inode *ip,
+ enum xfs_prealloc_flags flags);
+int xfs_zero_eof(struct xfs_inode *ip, xfs_off_t offset,
+ xfs_fsize_t isize, bool *did_zeroing);
+int xfs_iozero(struct xfs_inode *ip, loff_t pos, size_t count);
#define IHOLD(ip) \
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index d919ad7..e53a903 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -751,6 +751,7 @@
int error;
uint lock_flags = 0;
uint commit_flags = 0;
+ bool did_zeroing = false;
trace_xfs_setattr(ip);
@@ -794,20 +795,16 @@
return error;
/*
- * Now we can make the changes. Before we join the inode to the
- * transaction, take care of the part of the truncation that must be
- * done without the inode lock. This needs to be done before joining
- * the inode to the transaction, because the inode cannot be unlocked
- * once it is a part of the transaction.
+ * File data changes must be complete before we start the transaction to
+ * modify the inode. This needs to be done before joining the inode to
+ * the transaction because the inode cannot be unlocked once it is a
+ * part of the transaction.
+ *
+ * Start with zeroing any data block beyond EOF that we may expose on
+ * file extension.
*/
if (newsize > oldsize) {
- /*
- * Do the first part of growing a file: zero any data in the
- * last block that is beyond the old EOF. We need to do this
- * before the inode is joined to the transaction to modify
- * i_size.
- */
- error = xfs_zero_eof(ip, newsize, oldsize);
+ error = xfs_zero_eof(ip, newsize, oldsize, &did_zeroing);
if (error)
return error;
}
@@ -817,23 +814,18 @@
* any previous writes that are beyond the on disk EOF and the new
* EOF that have not been written out need to be written here. If we
* do not write the data out, we expose ourselves to the null files
- * problem.
- *
- * Only flush from the on disk size to the smaller of the in memory
- * file size or the new size as that's the range we really care about
- * here and prevents waiting for other data not within the range we
- * care about here.
+ * problem. Note that this includes any block zeroing we did above;
+ * otherwise those blocks may not be zeroed after a crash.
*/
- if (oldsize != ip->i_d.di_size && newsize > ip->i_d.di_size) {
+ if (newsize > ip->i_d.di_size &&
+ (oldsize != ip->i_d.di_size || did_zeroing)) {
error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
ip->i_d.di_size, newsize);
if (error)
return error;
}
- /*
- * Wait for all direct I/O to complete.
- */
+ /* Now wait for all direct I/O to complete. */
inode_dio_wait(inode);
/*
diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c
index 4b33ef1..365dd57 100644
--- a/fs/xfs/xfs_pnfs.c
+++ b/fs/xfs/xfs_pnfs.c
@@ -300,8 +300,10 @@
tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ichange, 0, 0);
- if (error)
+ if (error) {
+ xfs_trans_cancel(tp, 0);
goto out_drop_iolock;
+ }
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index 53cc2aa..fbbb9e6 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -836,6 +836,11 @@
*/
xfs_dqcheck(mp, ddq, id+j, type, XFS_QMOPT_DQREPAIR,
"xfs_quotacheck");
+ /*
+ * Reset type in case we are reusing group quota file for
+ * project quotas or vice versa
+ */
+ ddq->d_flags = type;
ddq->d_bcount = 0;
ddq->d_icount = 0;
ddq->d_rtbcount = 0;
diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h
index 180ad0e..d016dc5 100644
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -214,9 +214,9 @@
INTEL_VGA_DEVICE((((gt) - 1) << 4) | (id), info)
#define _INTEL_BDW_M_IDS(gt, info) \
- _INTEL_BDW_M(gt, 0x1602, info), /* ULT */ \
+ _INTEL_BDW_M(gt, 0x1602, info), /* Halo */ \
_INTEL_BDW_M(gt, 0x1606, info), /* ULT */ \
- _INTEL_BDW_M(gt, 0x160B, info), /* Iris */ \
+ _INTEL_BDW_M(gt, 0x160B, info), /* ULT */ \
_INTEL_BDW_M(gt, 0x160E, info) /* ULX */
#define _INTEL_BDW_D_IDS(gt, info) \
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index 51f7cca..4173a8f 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -33,6 +33,8 @@
* @units: Measurment unit for this attribute.
* @unit_expo: Exponent used in the data.
* @size: Size in bytes for data size.
+ * @logical_minimum: Logical minimum value for this attribute.
+ * @logical_maximum: Logical maximum value for this attribute.
*/
struct hid_sensor_hub_attribute_info {
u32 usage_id;
@@ -146,6 +148,7 @@
/**
* sensor_hub_input_attr_get_raw_value() - Synchronous read request
+* @hsdev: Hub device instance.
* @usage_id: Attribute usage id of parent physical device as per spec
* @attr_usage_id: Attribute usage id as per spec
* @report_id: Report id to look for
@@ -160,6 +163,7 @@
u32 attr_usage_id, u32 report_id);
/**
* sensor_hub_set_feature() - Feature set request
+* @hsdev: Hub device instance.
* @report_id: Report id to look for
* @field_index: Field index inside a report
* @value: Value to set
@@ -172,6 +176,7 @@
/**
* sensor_hub_get_feature() - Feature get request
+* @hsdev: Hub device instance.
* @report_id: Report id to look for
* @field_index: Field index inside a report
* @value: Place holder for return value
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index fc52e30..5eac316 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -314,6 +314,8 @@
}
#endif
+
+#if IS_ENABLED(CONFIG_THERMAL)
struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
void *, struct thermal_zone_device_ops *,
const struct thermal_zone_params *, int, int);
@@ -340,8 +342,58 @@
struct thermal_cooling_device *, int);
void thermal_cdev_update(struct thermal_cooling_device *);
void thermal_notify_framework(struct thermal_zone_device *, int);
+#else
+static inline struct thermal_zone_device *thermal_zone_device_register(
+ const char *type, int trips, int mask, void *devdata,
+ struct thermal_zone_device_ops *ops,
+ const struct thermal_zone_params *tzp,
+ int passive_delay, int polling_delay)
+{ return ERR_PTR(-ENODEV); }
+static inline void thermal_zone_device_unregister(
+ struct thermal_zone_device *tz)
+{ }
+static inline int thermal_zone_bind_cooling_device(
+ struct thermal_zone_device *tz, int trip,
+ struct thermal_cooling_device *cdev,
+ unsigned long upper, unsigned long lower)
+{ return -ENODEV; }
+static inline int thermal_zone_unbind_cooling_device(
+ struct thermal_zone_device *tz, int trip,
+ struct thermal_cooling_device *cdev)
+{ return -ENODEV; }
+static inline void thermal_zone_device_update(struct thermal_zone_device *tz)
+{ }
+static inline struct thermal_cooling_device *
+thermal_cooling_device_register(char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
+{ return ERR_PTR(-ENODEV); }
+static inline struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np,
+ char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
+{ return ERR_PTR(-ENODEV); }
+static inline void thermal_cooling_device_unregister(
+ struct thermal_cooling_device *cdev)
+{ }
+static inline struct thermal_zone_device *thermal_zone_get_zone_by_name(
+ const char *name)
+{ return ERR_PTR(-ENODEV); }
+static inline int thermal_zone_get_temp(
+ struct thermal_zone_device *tz, unsigned long *temp)
+{ return -ENODEV; }
+static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
+{ return -ENODEV; }
+static inline struct thermal_instance *
+get_thermal_instance(struct thermal_zone_device *tz,
+ struct thermal_cooling_device *cdev, int trip)
+{ return ERR_PTR(-ENODEV); }
+static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
+{ }
+static inline void thermal_notify_framework(struct thermal_zone_device *tz,
+ int trip)
+{ }
+#endif /* CONFIG_THERMAL */
-#ifdef CONFIG_NET
+#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL)
extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event);
#else
diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h
index 0210797..dc10c52 100644
--- a/include/soc/at91/at91sam9_ddrsdr.h
+++ b/include/soc/at91/at91sam9_ddrsdr.h
@@ -92,7 +92,7 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
-#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
+#define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index 7491ee5..8333821 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -46,4 +46,30 @@
}
#endif
+#ifdef CONFIG_PREEMPT
+
+static inline void xen_preemptible_hcall_begin(void)
+{
+}
+
+static inline void xen_preemptible_hcall_end(void)
+{
+}
+
+#else
+
+DECLARE_PER_CPU(bool, xen_in_preemptible_hcall);
+
+static inline void xen_preemptible_hcall_begin(void)
+{
+ __this_cpu_write(xen_in_preemptible_hcall, true);
+}
+
+static inline void xen_preemptible_hcall_end(void)
+{
+ __this_cpu_write(xen_in_preemptible_hcall, false);
+}
+
+#endif /* CONFIG_PREEMPT */
+
#endif /* INCLUDE_XEN_OPS_H */
diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index ff7f47d..782172f 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -314,12 +314,12 @@
rcu_read_lock();
func = list_first_or_null_rcu(&ops->func_stack, struct klp_func,
stack_node);
- rcu_read_unlock();
-
if (WARN_ON_ONCE(!func))
- return;
+ goto unlock;
klp_arch_set_pc(regs, (unsigned long)func->new_func);
+unlock:
+ rcu_read_unlock();
}
static int klp_disable_func(struct klp_func *func)
@@ -731,7 +731,7 @@
func->state = KLP_DISABLED;
return kobject_init_and_add(&func->kobj, &klp_ktype_func,
- obj->kobj, func->old_name);
+ obj->kobj, "%s", func->old_name);
}
/* parts of the initialization that is done only when the object is loaded */
@@ -807,7 +807,7 @@
patch->state = KLP_DISABLED;
ret = kobject_init_and_add(&patch->kobj, &klp_ktype_patch,
- klp_root_kobj, patch->mod->name);
+ klp_root_kobj, "%s", patch->mod->name);
if (ret)
goto unlock;
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index e16e554..6357265 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -1193,6 +1193,7 @@
ret = __rt_mutex_slowlock(lock, state, timeout, &waiter);
if (unlikely(ret)) {
+ __set_current_state(TASK_RUNNING);
if (rt_mutex_has_waiters(lock))
remove_waiter(lock, &waiter);
rt_mutex_handle_deadlock(ret, chwalk, &waiter);
diff --git a/kernel/sys.c b/kernel/sys.c
index 667b2e6..a03d9cd 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1108,6 +1108,7 @@
/*
* Work around broken programs that cannot handle "Linux 3.0".
* Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
+ * And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60.
*/
static int override_release(char __user *release, size_t len)
{
@@ -1127,7 +1128,7 @@
break;
rest++;
}
- v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
+ v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 60;
copy = clamp_t(size_t, len, 1, sizeof(buf));
copy = scnprintf(buf, copy, "2.6.%u%s", v, rest);
ret = copy_to_user(release, buf, copy + 1);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index d18d3a6..9fe0769 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -5247,7 +5247,7 @@
unsigned long low = ACCESS_ONCE(memcg->low);
if (low == PAGE_COUNTER_MAX)
- seq_puts(m, "infinity\n");
+ seq_puts(m, "max\n");
else
seq_printf(m, "%llu\n", (u64)low * PAGE_SIZE);
@@ -5262,7 +5262,7 @@
int err;
buf = strstrip(buf);
- err = page_counter_memparse(buf, "infinity", &low);
+ err = page_counter_memparse(buf, "max", &low);
if (err)
return err;
@@ -5277,7 +5277,7 @@
unsigned long high = ACCESS_ONCE(memcg->high);
if (high == PAGE_COUNTER_MAX)
- seq_puts(m, "infinity\n");
+ seq_puts(m, "max\n");
else
seq_printf(m, "%llu\n", (u64)high * PAGE_SIZE);
@@ -5292,7 +5292,7 @@
int err;
buf = strstrip(buf);
- err = page_counter_memparse(buf, "infinity", &high);
+ err = page_counter_memparse(buf, "max", &high);
if (err)
return err;
@@ -5307,7 +5307,7 @@
unsigned long max = ACCESS_ONCE(memcg->memory.limit);
if (max == PAGE_COUNTER_MAX)
- seq_puts(m, "infinity\n");
+ seq_puts(m, "max\n");
else
seq_printf(m, "%llu\n", (u64)max * PAGE_SIZE);
@@ -5322,7 +5322,7 @@
int err;
buf = strstrip(buf);
- err = page_counter_memparse(buf, "infinity", &max);
+ err = page_counter_memparse(buf, "max", &max);
if (err)
return err;
@@ -5426,7 +5426,7 @@
if (memcg == root_mem_cgroup)
return false;
- if (page_counter_read(&memcg->memory) > memcg->low)
+ if (page_counter_read(&memcg->memory) >= memcg->low)
return false;
while (memcg != root) {
@@ -5435,7 +5435,7 @@
if (memcg == root_mem_cgroup)
break;
- if (page_counter_read(&memcg->memory) > memcg->low)
+ if (page_counter_read(&memcg->memory) >= memcg->low)
return false;
}
return true;
diff --git a/mm/nommu.c b/mm/nommu.c
index 7296360..3e67e75 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1213,11 +1213,9 @@
if (sysctl_nr_trim_pages && total - point >= sysctl_nr_trim_pages) {
total = point;
kdebug("try to alloc exact %lu pages", total);
- base = alloc_pages_exact(len, GFP_KERNEL);
- } else {
- base = (void *)__get_free_pages(GFP_KERNEL, order);
}
+ base = alloc_pages_exact(total << PAGE_SHIFT, GFP_KERNEL);
if (!base)
goto enomem;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a47f0b2..7abfa70 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2353,8 +2353,15 @@
if (ac->high_zoneidx < ZONE_NORMAL)
goto out;
/* The OOM killer does not compensate for light reclaim */
- if (!(gfp_mask & __GFP_FS))
+ if (!(gfp_mask & __GFP_FS)) {
+ /*
+ * XXX: Page reclaim didn't yield anything,
+ * and the OOM killer can't be invoked, but
+ * keep looping as per should_alloc_retry().
+ */
+ *did_some_progress = 1;
goto out;
+ }
/*
* GFP_THISNODE contains __GFP_NORETRY and we never hit this.
* Sanity check for bare calls of __GFP_THISNODE, not real OOM.
diff --git a/mm/shmem.c b/mm/shmem.c
index 2f17cb5..cf2d0ca 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1455,6 +1455,9 @@
bool shmem_mapping(struct address_space *mapping)
{
+ if (!mapping->host)
+ return false;
+
return mapping->host->i_sb->s_op == &shmem_ops;
}
diff --git a/scripts/gdb/linux/__init__.py b/scripts/gdb/linux/__init__.py
new file mode 100644
index 0000000..4680fb1
--- /dev/null
+++ b/scripts/gdb/linux/__init__.py
@@ -0,0 +1 @@
+# nothing to do for the initialization of this package
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index b03a638..279e24f 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1552,6 +1552,8 @@
if (! snd_pcm_playback_empty(substream)) {
snd_pcm_do_start(substream, SNDRV_PCM_STATE_DRAINING);
snd_pcm_post_start(substream, SNDRV_PCM_STATE_DRAINING);
+ } else {
+ runtime->status->state = SNDRV_PCM_STATE_SETUP;
}
break;
case SNDRV_PCM_STATE_RUNNING:
diff --git a/sound/firewire/amdtp.c b/sound/firewire/amdtp.c
index 0d58018..5cc356d 100644
--- a/sound/firewire/amdtp.c
+++ b/sound/firewire/amdtp.c
@@ -33,7 +33,7 @@
*/
#define MAX_MIDI_RX_BLOCKS 8
-#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 µs */
+#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 microseconds */
/* isochronous header parameters */
#define ISO_DATA_LENGTH_SHIFT 16
@@ -78,7 +78,7 @@
int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir, enum cip_flags flags)
{
- s->unit = fw_unit_get(unit);
+ s->unit = unit;
s->direction = dir;
s->flags = flags;
s->context = ERR_PTR(-1);
@@ -102,7 +102,6 @@
{
WARN_ON(amdtp_stream_running(s));
mutex_destroy(&s->mutex);
- fw_unit_put(s->unit);
}
EXPORT_SYMBOL(amdtp_stream_destroy);
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index fc19c99..611b7da 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -116,11 +116,22 @@
return err;
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void
bebob_card_free(struct snd_card *card)
{
struct snd_bebob *bebob = card->private_data;
+ snd_bebob_stream_destroy_duplex(bebob);
+ fw_unit_put(bebob->unit);
+
+ kfree(bebob->maudio_special_quirk);
+
if (bebob->card_index >= 0) {
mutex_lock(&devices_mutex);
clear_bit(bebob->card_index, devices_used);
@@ -205,7 +216,7 @@
card->private_free = bebob_card_free;
bebob->card = card;
- bebob->unit = unit;
+ bebob->unit = fw_unit_get(unit);
bebob->spec = spec;
mutex_init(&bebob->mutex);
spin_lock_init(&bebob->lock);
@@ -306,10 +317,11 @@
if (bebob == NULL)
return;
- kfree(bebob->maudio_special_quirk);
+ /* Awake bus-reset waiters. */
+ if (!completion_done(&bebob->bus_reset))
+ complete_all(&bebob->bus_reset);
- snd_bebob_stream_destroy_duplex(bebob);
- snd_card_disconnect(bebob->card);
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(bebob->card);
}
diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c
index 0ebcabf..98e4fc8 100644
--- a/sound/firewire/bebob/bebob_stream.c
+++ b/sound/firewire/bebob/bebob_stream.c
@@ -410,8 +410,6 @@
static void
destroy_both_connections(struct snd_bebob *bebob)
{
- break_both_connections(bebob);
-
cmp_connection_destroy(&bebob->in_conn);
cmp_connection_destroy(&bebob->out_conn);
}
@@ -712,22 +710,16 @@
mutex_unlock(&bebob->mutex);
}
+/*
+ * This function should be called before starting streams or after stopping
+ * streams.
+ */
void snd_bebob_stream_destroy_duplex(struct snd_bebob *bebob)
{
- mutex_lock(&bebob->mutex);
-
- amdtp_stream_pcm_abort(&bebob->rx_stream);
- amdtp_stream_pcm_abort(&bebob->tx_stream);
-
- amdtp_stream_stop(&bebob->rx_stream);
- amdtp_stream_stop(&bebob->tx_stream);
-
amdtp_stream_destroy(&bebob->rx_stream);
amdtp_stream_destroy(&bebob->tx_stream);
destroy_both_connections(bebob);
-
- mutex_unlock(&bebob->mutex);
}
/*
diff --git a/sound/firewire/dice/dice-stream.c b/sound/firewire/dice/dice-stream.c
index fa9cf76..07dbd01 100644
--- a/sound/firewire/dice/dice-stream.c
+++ b/sound/firewire/dice/dice-stream.c
@@ -311,14 +311,21 @@
return err;
}
+/*
+ * This function should be called before starting streams or after stopping
+ * streams.
+ */
static void destroy_stream(struct snd_dice *dice, struct amdtp_stream *stream)
{
- amdtp_stream_destroy(stream);
+ struct fw_iso_resources *resources;
if (stream == &dice->tx_stream)
- fw_iso_resources_destroy(&dice->tx_resources);
+ resources = &dice->tx_resources;
else
- fw_iso_resources_destroy(&dice->rx_resources);
+ resources = &dice->rx_resources;
+
+ amdtp_stream_destroy(stream);
+ fw_iso_resources_destroy(resources);
}
int snd_dice_stream_init_duplex(struct snd_dice *dice)
@@ -332,6 +339,8 @@
goto end;
err = init_stream(dice, &dice->rx_stream);
+ if (err < 0)
+ destroy_stream(dice, &dice->tx_stream);
end:
return err;
}
@@ -340,10 +349,7 @@
{
snd_dice_transaction_clear_enable(dice);
- stop_stream(dice, &dice->tx_stream);
destroy_stream(dice, &dice->tx_stream);
-
- stop_stream(dice, &dice->rx_stream);
destroy_stream(dice, &dice->rx_stream);
dice->substreams_counter = 0;
diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c
index 90d8f40..70a111d7f 100644
--- a/sound/firewire/dice/dice.c
+++ b/sound/firewire/dice/dice.c
@@ -226,11 +226,20 @@
strcpy(card->mixername, "DICE");
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void dice_card_free(struct snd_card *card)
{
struct snd_dice *dice = card->private_data;
+ snd_dice_stream_destroy_duplex(dice);
snd_dice_transaction_destroy(dice);
+ fw_unit_put(dice->unit);
+
mutex_destroy(&dice->mutex);
}
@@ -251,7 +260,7 @@
dice = card->private_data;
dice->card = card;
- dice->unit = unit;
+ dice->unit = fw_unit_get(unit);
card->private_free = dice_card_free;
spin_lock_init(&dice->lock);
@@ -305,10 +314,7 @@
{
struct snd_dice *dice = dev_get_drvdata(&unit->device);
- snd_card_disconnect(dice->card);
-
- snd_dice_stream_destroy_duplex(dice);
-
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(dice->card);
}
diff --git a/sound/firewire/fireworks/fireworks.c b/sound/firewire/fireworks/fireworks.c
index 3e2ed8e..2682e7e 100644
--- a/sound/firewire/fireworks/fireworks.c
+++ b/sound/firewire/fireworks/fireworks.c
@@ -173,11 +173,23 @@
return err;
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void
efw_card_free(struct snd_card *card)
{
struct snd_efw *efw = card->private_data;
+ snd_efw_stream_destroy_duplex(efw);
+ snd_efw_transaction_remove_instance(efw);
+ fw_unit_put(efw->unit);
+
+ kfree(efw->resp_buf);
+
if (efw->card_index >= 0) {
mutex_lock(&devices_mutex);
clear_bit(efw->card_index, devices_used);
@@ -185,7 +197,6 @@
}
mutex_destroy(&efw->mutex);
- kfree(efw->resp_buf);
}
static int
@@ -218,7 +229,7 @@
card->private_free = efw_card_free;
efw->card = card;
- efw->unit = unit;
+ efw->unit = fw_unit_get(unit);
mutex_init(&efw->mutex);
spin_lock_init(&efw->lock);
init_waitqueue_head(&efw->hwdep_wait);
@@ -289,10 +300,7 @@
{
struct snd_efw *efw = dev_get_drvdata(&unit->device);
- snd_efw_stream_destroy_duplex(efw);
- snd_efw_transaction_remove_instance(efw);
-
- snd_card_disconnect(efw->card);
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(efw->card);
}
diff --git a/sound/firewire/fireworks/fireworks_stream.c b/sound/firewire/fireworks/fireworks_stream.c
index 4f440e1..c55db1b 100644
--- a/sound/firewire/fireworks/fireworks_stream.c
+++ b/sound/firewire/fireworks/fireworks_stream.c
@@ -100,17 +100,22 @@
return err;
}
+/*
+ * This function should be called before starting the stream or after stopping
+ * the streams.
+ */
static void
destroy_stream(struct snd_efw *efw, struct amdtp_stream *stream)
{
- stop_stream(efw, stream);
-
- amdtp_stream_destroy(stream);
+ struct cmp_connection *conn;
if (stream == &efw->tx_stream)
- cmp_connection_destroy(&efw->out_conn);
+ conn = &efw->out_conn;
else
- cmp_connection_destroy(&efw->in_conn);
+ conn = &efw->in_conn;
+
+ amdtp_stream_destroy(stream);
+ cmp_connection_destroy(&efw->out_conn);
}
static int
@@ -319,12 +324,8 @@
void snd_efw_stream_destroy_duplex(struct snd_efw *efw)
{
- mutex_lock(&efw->mutex);
-
destroy_stream(efw, &efw->rx_stream);
destroy_stream(efw, &efw->tx_stream);
-
- mutex_unlock(&efw->mutex);
}
void snd_efw_stream_lock_changed(struct snd_efw *efw)
diff --git a/sound/firewire/oxfw/oxfw-stream.c b/sound/firewire/oxfw/oxfw-stream.c
index bda845a..29ccb36 100644
--- a/sound/firewire/oxfw/oxfw-stream.c
+++ b/sound/firewire/oxfw/oxfw-stream.c
@@ -337,6 +337,10 @@
stop_stream(oxfw, stream);
}
+/*
+ * This function should be called before starting the stream or after stopping
+ * the streams.
+ */
void snd_oxfw_stream_destroy_simplex(struct snd_oxfw *oxfw,
struct amdtp_stream *stream)
{
@@ -347,8 +351,6 @@
else
conn = &oxfw->in_conn;
- stop_stream(oxfw, stream);
-
amdtp_stream_destroy(stream);
cmp_connection_destroy(conn);
}
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index 60e5cad..8c6ce01 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -104,11 +104,23 @@
return err;
}
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
static void oxfw_card_free(struct snd_card *card)
{
struct snd_oxfw *oxfw = card->private_data;
unsigned int i;
+ snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream);
+ if (oxfw->has_output)
+ snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream);
+
+ fw_unit_put(oxfw->unit);
+
for (i = 0; i < SND_OXFW_STREAM_FORMAT_ENTRIES; i++) {
kfree(oxfw->tx_stream_formats[i]);
kfree(oxfw->rx_stream_formats[i]);
@@ -136,7 +148,7 @@
oxfw = card->private_data;
oxfw->card = card;
mutex_init(&oxfw->mutex);
- oxfw->unit = unit;
+ oxfw->unit = fw_unit_get(unit);
oxfw->device_info = (const struct device_info *)id->driver_data;
spin_lock_init(&oxfw->lock);
init_waitqueue_head(&oxfw->hwdep_wait);
@@ -212,12 +224,7 @@
{
struct snd_oxfw *oxfw = dev_get_drvdata(&unit->device);
- snd_card_disconnect(oxfw->card);
-
- snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream);
- if (oxfw->has_output)
- snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream);
-
+ /* No need to wait for releasing card object in this context. */
snd_card_free_when_closed(oxfw->card);
}
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index dfcb5e9..a2ce773 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -961,7 +961,6 @@
dev_err(chip->card->dev, "cannot allocate CORB/RIRB\n");
return err;
}
-EXPORT_SYMBOL_GPL(azx_alloc_cmd_io);
static void azx_init_cmd_io(struct azx *chip)
{
@@ -1026,7 +1025,6 @@
azx_writeb(chip, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
spin_unlock_irq(&chip->reg_lock);
}
-EXPORT_SYMBOL_GPL(azx_init_cmd_io);
static void azx_free_cmd_io(struct azx *chip)
{
@@ -1036,7 +1034,6 @@
azx_writeb(chip, CORBCTL, 0);
spin_unlock_irq(&chip->reg_lock);
}
-EXPORT_SYMBOL_GPL(azx_free_cmd_io);
static unsigned int azx_command_addr(u32 cmd)
{
@@ -1316,7 +1313,6 @@
else
return azx_corb_send_cmd(bus, val);
}
-EXPORT_SYMBOL_GPL(azx_send_cmd);
/* get a response */
static unsigned int azx_get_response(struct hda_bus *bus,
@@ -1330,7 +1326,6 @@
else
return azx_rirb_get_response(bus, addr);
}
-EXPORT_SYMBOL_GPL(azx_get_response);
#ifdef CONFIG_SND_HDA_DSP_LOADER
/*
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 36d2f20..4ca3d5d 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1966,7 +1966,7 @@
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6d36c5b..87eff31 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -79,6 +79,7 @@
STAC_ALIENWARE_M17X,
STAC_92HD89XX_HP_FRONT_JACK,
STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK,
+ STAC_92HD73XX_ASUS_MOBO,
STAC_92HD73XX_MODELS
};
@@ -1911,7 +1912,18 @@
[STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK] = {
.type = HDA_FIXUP_PINS,
.v.pins = stac92hd89xx_hp_z1_g2_right_mic_jack_pin_configs,
- }
+ },
+ [STAC_92HD73XX_ASUS_MOBO] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ /* enable 5.1 and SPDIF out */
+ { 0x0c, 0x01014411 },
+ { 0x0d, 0x01014410 },
+ { 0x0e, 0x01014412 },
+ { 0x22, 0x014b1180 },
+ { }
+ }
+ },
};
static const struct hda_model_fixup stac92hd73xx_models[] = {
@@ -1923,6 +1935,7 @@
{ .id = STAC_DELL_M6_BOTH, .name = "dell-m6" },
{ .id = STAC_DELL_EQ, .name = "dell-eq" },
{ .id = STAC_ALIENWARE_M17X, .name = "alienware" },
+ { .id = STAC_92HD73XX_ASUS_MOBO, .name = "asus-mobo" },
{}
};
@@ -1975,6 +1988,8 @@
"HP Z1 G2", STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x2b17,
"unknown HP", STAC_92HD89XX_HP_FRONT_JACK),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_ASUSTEK, 0x83f8, "ASUS AT4NM10",
+ STAC_92HD73XX_ASUS_MOBO),
{} /* terminator */
};
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
index 6c14afe..db1d3a2 100644
--- a/tools/perf/bench/mem-memcpy.c
+++ b/tools/perf/bench/mem-memcpy.c
@@ -289,7 +289,7 @@
memcpy_t fn = r->fn.memcpy;
int i;
- memcpy_alloc_mem(&src, &dst, len);
+ memcpy_alloc_mem(&dst, &src, len);
if (prefault)
fn(dst, src, len);
@@ -312,7 +312,7 @@
void *src = NULL, *dst = NULL;
int i;
- memcpy_alloc_mem(&src, &dst, len);
+ memcpy_alloc_mem(&dst, &src, len);
if (prefault)
fn(dst, src, len);
diff --git a/tools/perf/config/Makefile.arch b/tools/perf/config/Makefile.arch
index ff95a68..ac8721f 100644
--- a/tools/perf/config/Makefile.arch
+++ b/tools/perf/config/Makefile.arch
@@ -21,6 +21,10 @@
endif
endif
+ifeq ($(RAW_ARCH),sparc64)
+ ARCH ?= sparc
+endif
+
ARCH ?= $(RAW_ARCH)
LP64 := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1)
diff --git a/tools/perf/config/feature-checks/Makefile b/tools/perf/config/feature-checks/Makefile
index 42ac05a..b32ff33 100644
--- a/tools/perf/config/feature-checks/Makefile
+++ b/tools/perf/config/feature-checks/Makefile
@@ -49,7 +49,7 @@
$(BUILD)
test-pthread-attr-setaffinity-np.bin:
- $(BUILD) -Werror -lpthread
+ $(BUILD) -D_GNU_SOURCE -Werror -lpthread
test-stackprotector-all.bin:
$(BUILD) -Werror -fstack-protector-all
diff --git a/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c b/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
index 0a0d3ec..2b81b72 100644
--- a/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
+++ b/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
@@ -5,10 +5,11 @@
{
int ret = 0;
pthread_attr_t thread_attr;
+ cpu_set_t cs;
pthread_attr_init(&thread_attr);
/* don't care abt exact args, just the API itself in libpthread */
- ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL);
+ ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cs), &cs);
return ret;
}
diff --git a/tools/perf/util/cloexec.c b/tools/perf/util/cloexec.c
index 47b78b3..6da965b 100644
--- a/tools/perf/util/cloexec.c
+++ b/tools/perf/util/cloexec.c
@@ -25,6 +25,10 @@
if (cpu < 0)
cpu = 0;
+ /*
+ * Using -1 for the pid is a workaround to avoid gratuitous jump label
+ * changes.
+ */
while (1) {
/* check cloexec flag */
fd = sys_perf_event_open(&attr, pid, cpu, -1,
@@ -47,16 +51,24 @@
err, strerror_r(err, sbuf, sizeof(sbuf)));
/* not supported, confirm error related to PERF_FLAG_FD_CLOEXEC */
- fd = sys_perf_event_open(&attr, pid, cpu, -1, 0);
+ while (1) {
+ fd = sys_perf_event_open(&attr, pid, cpu, -1, 0);
+ if (fd < 0 && pid == -1 && errno == EACCES) {
+ pid = 0;
+ continue;
+ }
+ break;
+ }
err = errno;
+ if (fd >= 0)
+ close(fd);
+
if (WARN_ONCE(fd < 0 && err != EBUSY,
"perf_event_open(..., 0) failed unexpectedly with error %d (%s)\n",
err, strerror_r(err, sbuf, sizeof(sbuf))))
return -1;
- close(fd);
-
return 0;
}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index c94a9e0..e99a676 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -28,7 +28,7 @@
int mask;
int refcnt;
unsigned int prev;
- char event_copy[PERF_SAMPLE_MAX_SIZE];
+ char event_copy[PERF_SAMPLE_MAX_SIZE] __attribute__((aligned(8)));
};
struct perf_evlist {
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index b24f9d8..33b7a2a 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -11,6 +11,11 @@
#include <symbol/kallsyms.h>
#include "debug.h"
+#ifndef EM_AARCH64
+#define EM_AARCH64 183 /* ARM 64 bit */
+#endif
+
+
#ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
extern char *cplus_demangle(const char *, int);
diff --git a/tools/thermal/tmon/.gitignore b/tools/thermal/tmon/.gitignore
new file mode 100644
index 0000000..06e96be
--- /dev/null
+++ b/tools/thermal/tmon/.gitignore
@@ -0,0 +1 @@
+/tmon
diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile
index e775adc..0788621 100644
--- a/tools/thermal/tmon/Makefile
+++ b/tools/thermal/tmon/Makefile
@@ -2,8 +2,8 @@
BINDIR=usr/bin
WARNFLAGS=-Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int
-CFLAGS= -O1 ${WARNFLAGS} -fstack-protector
-CC=gcc
+CFLAGS+= -O1 ${WARNFLAGS} -fstack-protector
+CC=$(CROSS_COMPILE)gcc
CFLAGS+=-D VERSION=\"$(VERSION)\"
LDFLAGS+=
@@ -16,12 +16,21 @@
CONFIG_FILE=
CONFIG_PATH=
+# Static builds might require -ltinfo, for instance
+ifneq ($(findstring -static, $(LDFLAGS)),)
+STATIC := --static
+endif
+
+TMON_LIBS=-lm -lpthread
+TMON_LIBS += $(shell pkg-config --libs $(STATIC) panelw ncursesw 2> /dev/null || \
+ pkg-config --libs $(STATIC) panel ncurses 2> /dev/null || \
+ echo -lpanel -lncurses)
OBJS = tmon.o tui.o sysfs.o pid.o
OBJS +=
tmon: $(OBJS) Makefile tmon.h
- $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread
+ $(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) -o $(TARGET) $(TMON_LIBS)
valgrind: tmon
sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null
diff --git a/tools/thermal/tmon/tmon.8 b/tools/thermal/tmon/tmon.8
index 0be727c..02d5179 100644
--- a/tools/thermal/tmon/tmon.8
+++ b/tools/thermal/tmon/tmon.8
@@ -55,6 +55,8 @@
.PP
The \fB-t --time-interval\fP option sets the polling interval in seconds
.PP
+The \fB-T --target-temp\fP option sets the initial target temperature
+.PP
The \fB-v --version\fP option shows the version of \fBtmon \fP
.PP
The \fB-z --zone\fP option sets the target therma zone instance to be controlled
diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c
index 09b7c32..9aa1965 100644
--- a/tools/thermal/tmon/tmon.c
+++ b/tools/thermal/tmon/tmon.c
@@ -64,6 +64,7 @@
printf(" -h, --help show this help message\n");
printf(" -l, --log log data to /var/tmp/tmon.log\n");
printf(" -t, --time-interval sampling time interval, > 1 sec.\n");
+ printf(" -T, --target-temp initial target temperature\n");
printf(" -v, --version show version\n");
printf(" -z, --zone target thermal zone id\n");
@@ -219,6 +220,7 @@
{ "control", 1, NULL, 'c' },
{ "daemon", 0, NULL, 'd' },
{ "time-interval", 1, NULL, 't' },
+ { "target-temp", 1, NULL, 'T' },
{ "log", 0, NULL, 'l' },
{ "help", 0, NULL, 'h' },
{ "version", 0, NULL, 'v' },
@@ -231,7 +233,7 @@
{
int err = 0;
int id2 = 0, c;
- double yk = 0.0; /* controller output */
+ double yk = 0.0, temp; /* controller output */
int target_tz_index;
if (geteuid() != 0) {
@@ -239,7 +241,7 @@
exit(EXIT_FAILURE);
}
- while ((c = getopt_long(argc, argv, "c:dlht:vgz:", opts, &id2)) != -1) {
+ while ((c = getopt_long(argc, argv, "c:dlht:T:vgz:", opts, &id2)) != -1) {
switch (c) {
case 'c':
no_control = 0;
@@ -254,6 +256,14 @@
if (ticktime < 1)
ticktime = 1;
break;
+ case 'T':
+ temp = strtod(optarg, NULL);
+ if (temp < 0) {
+ fprintf(stderr, "error: temperature must be positive\n");
+ return 1;
+ }
+ target_temp_user = temp;
+ break;
case 'l':
printf("Logging data to /var/tmp/tmon.log\n");
logging = 1;
diff --git a/tools/thermal/tmon/tui.c b/tools/thermal/tmon/tui.c
index 89f8ef0..b5d1c6b 100644
--- a/tools/thermal/tmon/tui.c
+++ b/tools/thermal/tmon/tui.c
@@ -30,6 +30,18 @@
#include "tmon.h"
+#define min(x, y) ({ \
+ typeof(x) _min1 = (x); \
+ typeof(y) _min2 = (y); \
+ (void) (&_min1 == &_min2); \
+ _min1 < _min2 ? _min1 : _min2; })
+
+#define max(x, y) ({ \
+ typeof(x) _max1 = (x); \
+ typeof(y) _max2 = (y); \
+ (void) (&_max1 == &_max2); \
+ _max1 > _max2 ? _max1 : _max2; })
+
static PANEL *data_panel;
static PANEL *dialogue_panel;
static PANEL *top;
@@ -98,6 +110,18 @@
wrefresh(status_bar_window);
}
+/* wrap at 5 */
+#define DIAG_DEV_ROWS 5
+/*
+ * list cooling devices + "set temp" entry; wraps after 5 rows, if they fit
+ */
+static int diag_dev_rows(void)
+{
+ int entries = ptdata.nr_cooling_dev + 1;
+ int rows = max(DIAG_DEV_ROWS, (entries + 1) / 2);
+ return min(rows, entries);
+}
+
void setup_windows(void)
{
int y_begin = 1;
@@ -122,7 +146,7 @@
* dialogue window is a pop-up, when needed it lays on top of cdev win
*/
- dialogue_window = subwin(stdscr, ptdata.nr_cooling_dev+5, maxx-50,
+ dialogue_window = subwin(stdscr, diag_dev_rows() + 5, maxx-50,
DIAG_Y, DIAG_X);
thermal_data_window = subwin(stdscr, ptdata.nr_tz_sensor *
@@ -258,21 +282,26 @@
}
const char DIAG_TITLE[] = "[ TUNABLES ]";
-#define DIAG_DEV_ROWS 5
void show_dialogue(void)
{
int j, x = 0, y = 0;
+ int rows, cols;
WINDOW *w = dialogue_window;
if (tui_disabled || !w)
return;
+ getmaxyx(w, rows, cols);
+
+ /* Silence compiler 'unused' warnings */
+ (void)cols;
+
werase(w);
box(w, 0, 0);
mvwprintw(w, 0, maxx/4, DIAG_TITLE);
/* list all the available tunables */
for (j = 0; j <= ptdata.nr_cooling_dev; j++) {
- y = j % DIAG_DEV_ROWS;
+ y = j % diag_dev_rows();
if (y == 0 && j != 0)
x += 20;
if (j == ptdata.nr_cooling_dev)
@@ -283,12 +312,10 @@
ptdata.cdi[j].type, ptdata.cdi[j].instance);
}
wattron(w, A_BOLD);
- mvwprintw(w, DIAG_DEV_ROWS+1, 1, "Enter Choice [A-Z]?");
+ mvwprintw(w, diag_dev_rows()+1, 1, "Enter Choice [A-Z]?");
wattroff(w, A_BOLD);
- /* y size of dialogue win is nr cdev + 5, so print legend
- * at the bottom line
- */
- mvwprintw(w, ptdata.nr_cooling_dev+3, 1,
+ /* print legend at the bottom line */
+ mvwprintw(w, rows - 2, 1,
"Legend: A=Active, P=Passive, C=Critical");
wrefresh(dialogue_window);
@@ -437,7 +464,7 @@
snprintf(buf, sizeof(buf), "New Value for %.10s-%2d: ",
ptdata.cdi[cdev_id].type,
ptdata.cdi[cdev_id].instance);
- write_dialogue_win(buf, DIAG_DEV_ROWS+2, 2);
+ write_dialogue_win(buf, diag_dev_rows() + 2, 2);
handle_input_val(cdev_id);
} else {
snprintf(buf, sizeof(buf), "Invalid selection %d", ch);