[ARM] pxa: update PXA MMC interface driver to use clk support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 657901e..0601e01 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -23,6 +23,8 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/mmc/host.h>
#include <asm/dma.h>
@@ -44,6 +46,8 @@
spinlock_t lock;
struct resource *res;
void __iomem *base;
+ struct clk *clk;
+ unsigned long clkrate;
int irq;
int dma;
unsigned int clkrt;
@@ -119,7 +123,7 @@
writel(nob, host->base + MMC_NOB);
writel(data->blksz, host->base + MMC_BLKLEN);
- clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
+ clks = (unsigned long long)data->timeout_ns * host->clkrate;
do_div(clks, 1000000000UL);
timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
writel((timeout + 255) / 256, host->base + MMC_RDTO);
@@ -365,18 +369,25 @@
struct pxamci_host *host = mmc_priv(mmc);
if (ios->clock) {
- unsigned int clk = CLOCKRATE / ios->clock;
- if (CLOCKRATE / clk > ios->clock)
+ unsigned long rate = host->clkrate;
+ unsigned int clk = rate / ios->clock;
+
+ /*
+ * clk might result in a lower divisor than we
+ * desire. check for that condition and adjust
+ * as appropriate.
+ */
+ if (rate / clk > ios->clock)
clk <<= 1;
host->clkrt = fls(clk) - 1;
- pxa_set_cken(CKEN_MMC, 1);
+ clk_enable(host->clk);
/*
* we write clkrt on the next command
*/
} else {
pxamci_stop_clock(host);
- pxa_set_cken(CKEN_MMC, 0);
+ clk_disable(host->clk);
}
if (host->power_mode != ios->power_mode) {
@@ -462,8 +473,6 @@
}
mmc->ops = &pxamci_ops;
- mmc->f_min = CLOCKRATE_MIN;
- mmc->f_max = CLOCKRATE_MAX;
/*
* We can do SG-DMA, but we don't because we never know how much
@@ -490,6 +499,22 @@
host->mmc = mmc;
host->dma = -1;
host->pdata = pdev->dev.platform_data;
+
+ host->clk = clk_get(&pdev->dev, "MMCCLK");
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ host->clk = NULL;
+ goto out;
+ }
+
+ host->clkrate = clk_get_rate(host->clk);
+
+ /*
+ * Calculate minimum clock rate, rounding up.
+ */
+ mmc->f_min = (host->clkrate + 63) / 64;
+ mmc->f_max = host->clkrate;
+
mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
MMC_VDD_32_33|MMC_VDD_33_34;
@@ -554,6 +579,8 @@
iounmap(host->base);
if (host->sg_cpu)
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ if (host->clk)
+ clk_put(host->clk);
}
if (mmc)
mmc_free_host(mmc);
@@ -588,6 +615,8 @@
iounmap(host->base);
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ clk_put(host->clk);
+
release_resource(host->res);
mmc_free_host(mmc);
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index 3153e77..748c770 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -88,17 +88,3 @@
#define MMC_RXFIFO 0x0040 /* 8 bit */
#define MMC_TXFIFO 0x0044 /* 8 bit */
-
-/*
- * The base MMC clock rate
- */
-#ifdef CONFIG_PXA27x
-#define CLOCKRATE_MIN 304688
-#define CLOCKRATE_MAX 19500000
-#else
-#define CLOCKRATE_MIN 312500
-#define CLOCKRATE_MAX 20000000
-#endif
-
-#define CLOCKRATE CLOCKRATE_MAX
-