| /* |
| * MAXIM MAX77693 Haptic device driver |
| * |
| * Copyright (C) 2014 Samsung Electronics |
| * Jaewon Kim <jaewon02.kim@samsung.com> |
| * |
| * This program is not provided / owned by Maxim Integrated Products. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/input.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/mfd/max77693.h> |
| #include <linux/mfd/max77693-private.h> |
| |
| #define MAX_MAGNITUDE_SHIFT 16 |
| |
| enum max77693_haptic_motor_type { |
| MAX77693_HAPTIC_ERM = 0, |
| MAX77693_HAPTIC_LRA, |
| }; |
| |
| enum max77693_haptic_pulse_mode { |
| MAX77693_HAPTIC_EXTERNAL_MODE = 0, |
| MAX77693_HAPTIC_INTERNAL_MODE, |
| }; |
| |
| enum max77693_haptic_pwm_divisor { |
| MAX77693_HAPTIC_PWM_DIVISOR_32 = 0, |
| MAX77693_HAPTIC_PWM_DIVISOR_64, |
| MAX77693_HAPTIC_PWM_DIVISOR_128, |
| MAX77693_HAPTIC_PWM_DIVISOR_256, |
| }; |
| |
| struct max77693_haptic { |
| struct regmap *regmap_pmic; |
| struct regmap *regmap_haptic; |
| struct device *dev; |
| struct input_dev *input_dev; |
| struct pwm_device *pwm_dev; |
| struct regulator *motor_reg; |
| |
| bool enabled; |
| bool suspend_state; |
| unsigned int magnitude; |
| unsigned int pwm_duty; |
| enum max77693_haptic_motor_type type; |
| enum max77693_haptic_pulse_mode mode; |
| enum max77693_haptic_pwm_divisor pwm_divisor; |
| |
| struct work_struct work; |
| }; |
| |
| static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic) |
| { |
| int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2; |
| int error; |
| |
| error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period); |
| if (error) { |
| dev_err(haptic->dev, "failed to configure pwm: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int max77693_haptic_configure(struct max77693_haptic *haptic, |
| bool enable) |
| { |
| unsigned int value; |
| int error; |
| |
| value = ((haptic->type << MAX77693_CONFIG2_MODE) | |
| (enable << MAX77693_CONFIG2_MEN) | |
| (haptic->mode << MAX77693_CONFIG2_HTYP) | |
| (haptic->pwm_divisor)); |
| |
| error = regmap_write(haptic->regmap_haptic, |
| MAX77693_HAPTIC_REG_CONFIG2, value); |
| if (error) { |
| dev_err(haptic->dev, |
| "failed to update haptic config: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable) |
| { |
| int error; |
| |
| error = regmap_update_bits(haptic->regmap_pmic, |
| MAX77693_PMIC_REG_LSCNFG, |
| MAX77693_PMIC_LOW_SYS_MASK, |
| enable << MAX77693_PMIC_LOW_SYS_SHIFT); |
| if (error) { |
| dev_err(haptic->dev, "cannot update pmic regmap: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static void max77693_haptic_enable(struct max77693_haptic *haptic) |
| { |
| int error; |
| |
| if (haptic->enabled) |
| return; |
| |
| error = pwm_enable(haptic->pwm_dev); |
| if (error) { |
| dev_err(haptic->dev, |
| "failed to enable haptic pwm device: %d\n", error); |
| return; |
| } |
| |
| error = max77693_haptic_lowsys(haptic, true); |
| if (error) |
| goto err_enable_lowsys; |
| |
| error = max77693_haptic_configure(haptic, true); |
| if (error) |
| goto err_enable_config; |
| |
| haptic->enabled = true; |
| |
| return; |
| |
| err_enable_config: |
| max77693_haptic_lowsys(haptic, false); |
| err_enable_lowsys: |
| pwm_disable(haptic->pwm_dev); |
| } |
| |
| static void max77693_haptic_disable(struct max77693_haptic *haptic) |
| { |
| int error; |
| |
| if (!haptic->enabled) |
| return; |
| |
| error = max77693_haptic_configure(haptic, false); |
| if (error) |
| return; |
| |
| error = max77693_haptic_lowsys(haptic, false); |
| if (error) |
| goto err_disable_lowsys; |
| |
| pwm_disable(haptic->pwm_dev); |
| haptic->enabled = false; |
| |
| return; |
| |
| err_disable_lowsys: |
| max77693_haptic_configure(haptic, true); |
| } |
| |
| static void max77693_haptic_play_work(struct work_struct *work) |
| { |
| struct max77693_haptic *haptic = |
| container_of(work, struct max77693_haptic, work); |
| int error; |
| |
| error = max77693_haptic_set_duty_cycle(haptic); |
| if (error) { |
| dev_err(haptic->dev, "failed to set duty cycle: %d\n", error); |
| return; |
| } |
| |
| if (haptic->magnitude) |
| max77693_haptic_enable(haptic); |
| else |
| max77693_haptic_disable(haptic); |
| } |
| |
| static int max77693_haptic_play_effect(struct input_dev *dev, void *data, |
| struct ff_effect *effect) |
| { |
| struct max77693_haptic *haptic = input_get_drvdata(dev); |
| u64 period_mag_multi; |
| |
| haptic->magnitude = effect->u.rumble.strong_magnitude; |
| if (!haptic->magnitude) |
| haptic->magnitude = effect->u.rumble.weak_magnitude; |
| |
| /* |
| * The magnitude comes from force-feedback interface. |
| * The formula to convert magnitude to pwm_duty as follows: |
| * - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF) |
| */ |
| period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude; |
| haptic->pwm_duty = (unsigned int)(period_mag_multi >> |
| MAX_MAGNITUDE_SHIFT); |
| |
| schedule_work(&haptic->work); |
| |
| return 0; |
| } |
| |
| static int max77693_haptic_open(struct input_dev *dev) |
| { |
| struct max77693_haptic *haptic = input_get_drvdata(dev); |
| int error; |
| |
| error = regulator_enable(haptic->motor_reg); |
| if (error) { |
| dev_err(haptic->dev, |
| "failed to enable regulator: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static void max77693_haptic_close(struct input_dev *dev) |
| { |
| struct max77693_haptic *haptic = input_get_drvdata(dev); |
| int error; |
| |
| cancel_work_sync(&haptic->work); |
| max77693_haptic_disable(haptic); |
| |
| error = regulator_disable(haptic->motor_reg); |
| if (error) |
| dev_err(haptic->dev, |
| "failed to disable regulator: %d\n", error); |
| } |
| |
| static int max77693_haptic_probe(struct platform_device *pdev) |
| { |
| struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent); |
| struct max77693_haptic *haptic; |
| int error; |
| |
| haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL); |
| if (!haptic) |
| return -ENOMEM; |
| |
| haptic->regmap_pmic = max77693->regmap; |
| haptic->regmap_haptic = max77693->regmap_haptic; |
| haptic->dev = &pdev->dev; |
| haptic->type = MAX77693_HAPTIC_LRA; |
| haptic->mode = MAX77693_HAPTIC_EXTERNAL_MODE; |
| haptic->pwm_divisor = MAX77693_HAPTIC_PWM_DIVISOR_128; |
| haptic->suspend_state = false; |
| |
| INIT_WORK(&haptic->work, max77693_haptic_play_work); |
| |
| /* Get pwm and regulatot for haptic device */ |
| haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL); |
| if (IS_ERR(haptic->pwm_dev)) { |
| dev_err(&pdev->dev, "failed to get pwm device\n"); |
| return PTR_ERR(haptic->pwm_dev); |
| } |
| |
| haptic->motor_reg = devm_regulator_get(&pdev->dev, "haptic"); |
| if (IS_ERR(haptic->motor_reg)) { |
| dev_err(&pdev->dev, "failed to get regulator\n"); |
| return PTR_ERR(haptic->motor_reg); |
| } |
| |
| /* Initialize input device for haptic device */ |
| haptic->input_dev = devm_input_allocate_device(&pdev->dev); |
| if (!haptic->input_dev) { |
| dev_err(&pdev->dev, "failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| haptic->input_dev->name = "max77693-haptic"; |
| haptic->input_dev->id.version = 1; |
| haptic->input_dev->dev.parent = &pdev->dev; |
| haptic->input_dev->open = max77693_haptic_open; |
| haptic->input_dev->close = max77693_haptic_close; |
| input_set_drvdata(haptic->input_dev, haptic); |
| input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE); |
| |
| error = input_ff_create_memless(haptic->input_dev, NULL, |
| max77693_haptic_play_effect); |
| if (error) { |
| dev_err(&pdev->dev, "failed to create force-feedback\n"); |
| return error; |
| } |
| |
| error = input_register_device(haptic->input_dev); |
| if (error) { |
| dev_err(&pdev->dev, "failed to register input device\n"); |
| return error; |
| } |
| |
| platform_set_drvdata(pdev, haptic); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int max77693_haptic_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct max77693_haptic *haptic = platform_get_drvdata(pdev); |
| |
| if (haptic->enabled) { |
| max77693_haptic_disable(haptic); |
| haptic->suspend_state = true; |
| } |
| |
| return 0; |
| } |
| |
| static int max77693_haptic_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct max77693_haptic *haptic = platform_get_drvdata(pdev); |
| |
| if (haptic->suspend_state) { |
| max77693_haptic_enable(haptic); |
| haptic->suspend_state = false; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops, |
| max77693_haptic_suspend, max77693_haptic_resume); |
| |
| static struct platform_driver max77693_haptic_driver = { |
| .driver = { |
| .name = "max77693-haptic", |
| .owner = THIS_MODULE, |
| .pm = &max77693_haptic_pm_ops, |
| }, |
| .probe = max77693_haptic_probe, |
| }; |
| module_platform_driver(max77693_haptic_driver); |
| |
| MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>"); |
| MODULE_DESCRIPTION("MAXIM MAX77693 Haptic driver"); |
| MODULE_ALIAS("platform:max77693-haptic"); |
| MODULE_LICENSE("GPL"); |