staging:iio: Move adis library out of staging
Now that the adis library no longer depends on the sw_ring buffer implementation
we can move it out of staging.
While we are at it also sort the entries in the iio Kconfig and Makefile to be
in alphabetical order.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
new file mode 100644
index 0000000..a91b4cb
--- /dev/null
+++ b/drivers/iio/imu/adis_buffer.c
@@ -0,0 +1,159 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/imu/adis.h>
+
+int adis_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct adis *adis = iio_device_get_drvdata(indio_dev);
+ const struct iio_chan_spec *chan;
+ unsigned int scan_count;
+ unsigned int i, j;
+ __be16 *tx, *rx;
+
+ kfree(adis->xfer);
+ kfree(adis->buffer);
+
+ scan_count = indio_dev->scan_bytes / 2;
+
+ adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL);
+ if (!adis->xfer)
+ return -ENOMEM;
+
+ adis->buffer = kzalloc(indio_dev->scan_bytes * 2, GFP_KERNEL);
+ if (!adis->buffer)
+ return -ENOMEM;
+
+ rx = adis->buffer;
+ tx = rx + indio_dev->scan_bytes;
+
+ spi_message_init(&adis->msg);
+
+ for (j = 0; j <= scan_count; j++) {
+ adis->xfer[j].bits_per_word = 8;
+ if (j != scan_count)
+ adis->xfer[j].cs_change = 1;
+ adis->xfer[j].len = 2;
+ adis->xfer[j].delay_usecs = adis->data->read_delay;
+ if (j < scan_count)
+ adis->xfer[j].tx_buf = &tx[j];
+ if (j >= 1)
+ adis->xfer[j].rx_buf = &rx[j - 1];
+ spi_message_add_tail(&adis->xfer[j], &adis->msg);
+ }
+
+ chan = indio_dev->channels;
+ for (i = 0; i < indio_dev->num_channels; i++, chan++) {
+ if (!test_bit(chan->scan_index, scan_mask))
+ continue;
+ *tx++ = cpu_to_be16(chan->address << 8);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(adis_update_scan_mode);
+
+static irqreturn_t adis_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct adis *adis = iio_device_get_drvdata(indio_dev);
+ int ret;
+
+ if (!adis->buffer)
+ return -ENOMEM;
+
+ ret = spi_sync(adis->spi, &adis->msg);
+ if (ret)
+ dev_err(&adis->spi->dev, "Failed to read data: %d", ret);
+
+ /* Guaranteed to be aligned with 8 byte boundary */
+ if (indio_dev->scan_timestamp) {
+ void *b = adis->buffer + indio_dev->scan_bytes - sizeof(s64);
+ *(s64 *)b = pf->timestamp;
+ }
+
+ iio_push_to_buffers(indio_dev, adis->buffer);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device
+ * @adis: The adis device.
+ * @indio_dev: The IIO device.
+ * @trigger_handler: Optional trigger handler, may be NULL.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function sets up the buffer and trigger for a adis devices. If
+ * 'trigger_handler' is NULL the default trigger handler will be used. The
+ * default trigger handler will simply read the registers assigned to the
+ * currently active channels.
+ *
+ * adis_cleanup_buffer_and_trigger() should be called to free the resources
+ * allocated by this function.
+ */
+int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
+ irqreturn_t (*trigger_handler)(int, void *))
+{
+ int ret;
+
+ if (!trigger_handler)
+ trigger_handler = adis_trigger_handler;
+
+ ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ trigger_handler, NULL);
+ if (ret)
+ return ret;
+
+ if (adis->spi->irq) {
+ ret = adis_probe_trigger(adis, indio_dev);
+ if (ret)
+ goto error_buffer_cleanup;
+ }
+ return 0;
+
+error_buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger);
+
+/**
+ * adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources
+ * @adis: The adis device.
+ * @indio_dev: The IIO device.
+ *
+ * Frees resources allocated by adis_setup_buffer_and_trigger()
+ */
+void adis_cleanup_buffer_and_trigger(struct adis *adis,
+ struct iio_dev *indio_dev)
+{
+ if (adis->spi->irq)
+ adis_remove_trigger(adis);
+ kfree(adis->buffer);
+ kfree(adis->xfer);
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger);