diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index de79283..2985e3f 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2550,6 +2550,27 @@
 EXPORT_SYMBOL(drm_mode_set_config_internal);
 
 /**
+ * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
+ * @mode: mode to query
+ * @hdisplay: hdisplay value to fill in
+ * @vdisplay: vdisplay value to fill in
+ *
+ * The vdisplay value will be doubled if the specified mode is a stereo mode of
+ * the appropriate layout.
+ */
+void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay)
+{
+	struct drm_display_mode adjusted;
+
+	drm_mode_copy(&adjusted, mode);
+	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
+	*hdisplay = adjusted.crtc_hdisplay;
+	*vdisplay = adjusted.crtc_vdisplay;
+}
+EXPORT_SYMBOL(drm_crtc_get_hv_timing);
+
+/**
  * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
  *     CRTC viewport
  * @crtc: CRTC that framebuffer will be displayed on
@@ -2566,16 +2587,7 @@
 {
 	int hdisplay, vdisplay;
 
-	hdisplay = mode->hdisplay;
-	vdisplay = mode->vdisplay;
-
-	if (drm_mode_is_stereo(mode)) {
-		struct drm_display_mode adjusted = *mode;
-
-		drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
-		hdisplay = adjusted.crtc_hdisplay;
-		vdisplay = adjusted.crtc_vdisplay;
-	}
+	drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
 
 	if (crtc->invert_dimensions)
 		swap(hdisplay, vdisplay);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 6d8b941..7689c14 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -739,6 +739,8 @@
  * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for
  *   buffers containing two eyes (only adjust the timings when needed, eg. for
  *   "frame packing" or "side by side full").
+ * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not*
+ *   be performed for doublescan and vscan > 1 modes respectively.
  */
 void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
 {
@@ -765,18 +767,22 @@
 		}
 	}
 
-	if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
-		p->crtc_vdisplay *= 2;
-		p->crtc_vsync_start *= 2;
-		p->crtc_vsync_end *= 2;
-		p->crtc_vtotal *= 2;
+	if (!(adjust_flags & CRTC_NO_DBLSCAN)) {
+		if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
+			p->crtc_vdisplay *= 2;
+			p->crtc_vsync_start *= 2;
+			p->crtc_vsync_end *= 2;
+			p->crtc_vtotal *= 2;
+		}
 	}
 
-	if (p->vscan > 1) {
-		p->crtc_vdisplay *= p->vscan;
-		p->crtc_vsync_start *= p->vscan;
-		p->crtc_vsync_end *= p->vscan;
-		p->crtc_vtotal *= p->vscan;
+	if (!(adjust_flags & CRTC_NO_VSCAN)) {
+		if (p->vscan > 1) {
+			p->crtc_vdisplay *= p->vscan;
+			p->crtc_vsync_start *= p->vscan;
+			p->crtc_vsync_end *= p->vscan;
+			p->crtc_vtotal *= p->vscan;
+		}
 	}
 
 	if (adjust_flags & CRTC_STEREO_DOUBLE) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3a088c0..9eee2c9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10322,9 +10322,9 @@
 	 * computation to clearly distinguish it from the adjusted mode, which
 	 * can be changed by the connectors in the below retry loop.
 	 */
-	drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
-	pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
-	pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
+	drm_crtc_get_hv_timing(&pipe_config->requested_mode,
+			       &pipe_config->pipe_src_w,
+			       &pipe_config->pipe_src_h);
 
 encoder_retry:
 	/* Ensure the port clock defaults are reset when retrying. */