| /******************************************************************************* |
| * This file contains error recovery level one used by the iSCSI Target driver. |
| * |
| * \u00a9 Copyright 2007-2011 RisingTide Systems LLC. |
| * |
| * Licensed to the Linux Foundation under the General Public License (GPL) version 2. |
| * |
| * Author: Nicholas A. Bellinger <nab@linux-iscsi.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| ******************************************************************************/ |
| |
| #include <linux/list.h> |
| #include <scsi/iscsi_proto.h> |
| #include <target/target_core_base.h> |
| #include <target/target_core_fabric.h> |
| |
| #include "iscsi_target_core.h" |
| #include "iscsi_target_seq_pdu_list.h" |
| #include "iscsi_target_datain_values.h" |
| #include "iscsi_target_device.h" |
| #include "iscsi_target_tpg.h" |
| #include "iscsi_target_util.h" |
| #include "iscsi_target_erl0.h" |
| #include "iscsi_target_erl1.h" |
| #include "iscsi_target_erl2.h" |
| #include "iscsi_target.h" |
| |
| #define OFFLOAD_BUF_SIZE 32768 |
| |
| /* |
| * Used to dump excess datain payload for certain error recovery |
| * situations. Receive in OFFLOAD_BUF_SIZE max of datain per rx_data(). |
| * |
| * dump_padding_digest denotes if padding and data digests need |
| * to be dumped. |
| */ |
| int iscsit_dump_data_payload( |
| struct iscsi_conn *conn, |
| u32 buf_len, |
| int dump_padding_digest) |
| { |
| char *buf, pad_bytes[4]; |
| int ret = DATAOUT_WITHIN_COMMAND_RECOVERY, rx_got; |
| u32 length, padding, offset = 0, size; |
| struct kvec iov; |
| |
| length = (buf_len > OFFLOAD_BUF_SIZE) ? OFFLOAD_BUF_SIZE : buf_len; |
| |
| buf = kzalloc(length, GFP_ATOMIC); |
| if (!buf) { |
| pr_err("Unable to allocate %u bytes for offload" |
| " buffer.\n", length); |
| return -1; |
| } |
| memset(&iov, 0, sizeof(struct kvec)); |
| |
| while (offset < buf_len) { |
| size = ((offset + length) > buf_len) ? |
| (buf_len - offset) : length; |
| |
| iov.iov_len = size; |
| iov.iov_base = buf; |
| |
| rx_got = rx_data(conn, &iov, 1, size); |
| if (rx_got != size) { |
| ret = DATAOUT_CANNOT_RECOVER; |
| goto out; |
| } |
| |
| offset += size; |
| } |
| |
| if (!dump_padding_digest) |
| goto out; |
| |
| padding = ((-buf_len) & 3); |
| if (padding != 0) { |
| iov.iov_len = padding; |
| iov.iov_base = pad_bytes; |
| |
| rx_got = rx_data(conn, &iov, 1, padding); |
| if (rx_got != padding) { |
| ret = DATAOUT_CANNOT_RECOVER; |
| goto out; |
| } |
| } |
| |
| if (conn->conn_ops->DataDigest) { |
| u32 data_crc; |
| |
| iov.iov_len = ISCSI_CRC_LEN; |
| iov.iov_base = &data_crc; |
| |
| rx_got = rx_data(conn, &iov, 1, ISCSI_CRC_LEN); |
| if (rx_got != ISCSI_CRC_LEN) { |
| ret = DATAOUT_CANNOT_RECOVER; |
| goto out; |
| } |
| } |
| |
| out: |
| kfree(buf); |
| return ret; |
| } |
| |
| /* |
| * Used for retransmitting R2Ts from a R2T SNACK request. |
| */ |
| static int iscsit_send_recovery_r2t_for_snack( |
| struct iscsi_cmd *cmd, |
| struct iscsi_r2t *r2t) |
| { |
| /* |
| * If the struct iscsi_r2t has not been sent yet, we can safely |
| * ignore retransmission |
| * of the R2TSN in question. |
| */ |
| spin_lock_bh(&cmd->r2t_lock); |
| if (!r2t->sent_r2t) { |
| spin_unlock_bh(&cmd->r2t_lock); |
| return 0; |
| } |
| r2t->sent_r2t = 0; |
| spin_unlock_bh(&cmd->r2t_lock); |
| |
| iscsit_add_cmd_to_immediate_queue(cmd, cmd->conn, ISTATE_SEND_R2T); |
| |
| return 0; |
| } |
| |
| static int iscsit_handle_r2t_snack( |
| struct iscsi_cmd *cmd, |
| unsigned char *buf, |
| u32 begrun, |
| u32 runlength) |
| { |
| u32 last_r2tsn; |
| struct iscsi_r2t *r2t; |
| |
| /* |
| * Make sure the initiator is not requesting retransmission |
| * of R2TSNs already acknowledged by a TMR TASK_REASSIGN. |
| */ |
| if ((cmd->cmd_flags & ICF_GOT_DATACK_SNACK) && |
| (begrun <= cmd->acked_data_sn)) { |
| pr_err("ITT: 0x%08x, R2T SNACK requesting" |
| " retransmission of R2TSN: 0x%08x to 0x%08x but already" |
| " acked to R2TSN: 0x%08x by TMR TASK_REASSIGN," |
| " protocol error.\n", cmd->init_task_tag, begrun, |
| (begrun + runlength), cmd->acked_data_sn); |
| |
| return iscsit_add_reject_from_cmd( |
| ISCSI_REASON_PROTOCOL_ERROR, |
| 1, 0, buf, cmd); |
| } |
| |
| if (runlength) { |
| if ((begrun + runlength) > cmd->r2t_sn) { |
| pr_err("Command ITT: 0x%08x received R2T SNACK" |
| " with BegRun: 0x%08x, RunLength: 0x%08x, exceeds" |
| " current R2TSN: 0x%08x, protocol error.\n", |
| cmd->init_task_tag, begrun, runlength, cmd->r2t_sn); |
| return iscsit_add_reject_from_cmd( |
| ISCSI_REASON_BOOKMARK_INVALID, 1, 0, buf, cmd); |
| } |
| last_r2tsn = (begrun + runlength); |
| } else |
| last_r2tsn = cmd->r2t_sn; |
| |
| while (begrun < last_r2tsn) { |
| r2t = iscsit_get_holder_for_r2tsn(cmd, begrun); |
| if (!r2t) |
| return -1; |
| if (iscsit_send_recovery_r2t_for_snack(cmd, r2t) < 0) |
| return -1; |
| |
| begrun++; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Generates Offsets and NextBurstLength based on Begrun and Runlength |
| * carried in a Data SNACK or ExpDataSN in TMR TASK_REASSIGN. |
| * |
| * For DataSequenceInOrder=Yes and DataPDUInOrder=[Yes,No] only. |
| * |
| * FIXME: How is this handled for a RData SNACK? |
| */ |
| int iscsit_create_recovery_datain_values_datasequenceinorder_yes( |
| struct iscsi_cmd *cmd, |
| struct iscsi_datain_req *dr) |
| { |
| u32 data_sn = 0, data_sn_count = 0; |
| u32 pdu_start = 0, seq_no = 0; |
| u32 begrun = dr->begrun; |
| struct iscsi_conn *conn = cmd->conn; |
| |
| while (begrun > data_sn++) { |
| data_sn_count++; |
| if ((dr->next_burst_len + |
| conn->conn_ops->MaxRecvDataSegmentLength) < |
| conn->sess->sess_ops->MaxBurstLength) { |
| dr->read_data_done += |
| conn->conn_ops->MaxRecvDataSegmentLength; |
| dr->next_burst_len += |
| conn->conn_ops->MaxRecvDataSegmentLength; |
| } else { |
| dr->read_data_done += |
| (conn->sess->sess_ops->MaxBurstLength - |
| dr->next_burst_len); |
| dr->next_burst_len = 0; |
| pdu_start += data_sn_count; |
| data_sn_count = 0; |
| seq_no++; |
| } |
| } |
| |
| if (!conn->sess->sess_ops->DataPDUInOrder) { |
| cmd->seq_no = seq_no; |
| cmd->pdu_start = pdu_start; |
| cmd->pdu_send_order = data_sn_count; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Generates Offsets and NextBurstLength based on Begrun and Runlength |
| * carried in a Data SNACK or ExpDataSN in TMR TASK_REASSIGN. |
| * |
| * For DataSequenceInOrder=No and DataPDUInOrder=[Yes,No] only. |
| * |
| * FIXME: How is this handled for a RData SNACK? |
| */ |
| int iscsit_create_recovery_datain_values_datasequenceinorder_no( |
| struct iscsi_cmd *cmd, |
| struct iscsi_datain_req *dr) |
| { |
| int found_seq = 0, i; |
| u32 data_sn, read_data_done = 0, seq_send_order = 0; |
| u32 begrun = dr->begrun; |
| u32 runlength = dr->runlength; |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_seq *first_seq = NULL, *seq = NULL; |
| |
| if (!cmd->seq_list) { |
| pr_err("struct iscsi_cmd->seq_list is NULL!\n"); |
| return -1; |
| } |
| |
| /* |
| * Calculate read_data_done for all sequences containing a |
| * first_datasn and last_datasn less than the BegRun. |
| * |
| * Locate the struct iscsi_seq the BegRun lies within and calculate |
| * NextBurstLenghth up to the DataSN based on MaxRecvDataSegmentLength. |
| * |
| * Also use struct iscsi_seq->seq_send_order to determine where to start. |
| */ |
| for (i = 0; i < cmd->seq_count; i++) { |
| seq = &cmd->seq_list[i]; |
| |
| if (!seq->seq_send_order) |
| first_seq = seq; |
| |
| /* |
| * No data has been transferred for this DataIN sequence, so the |
| * seq->first_datasn and seq->last_datasn have not been set. |
| */ |
| if (!seq->sent) { |
| pr_err("Ignoring non-sent sequence 0x%08x ->" |
| " 0x%08x\n\n", seq->first_datasn, |
| seq->last_datasn); |
| continue; |
| } |
| |
| /* |
| * This DataIN sequence is precedes the received BegRun, add the |
| * total xfer_len of the sequence to read_data_done and reset |
| * seq->pdu_send_order. |
| */ |
| if ((seq->first_datasn < begrun) && |
| (seq->last_datasn < begrun)) { |
| pr_err("Pre BegRun sequence 0x%08x ->" |
| " 0x%08x\n", seq->first_datasn, |
| seq->last_datasn); |
| |
| read_data_done += cmd->seq_list[i].xfer_len; |
| seq->next_burst_len = seq->pdu_send_order = 0; |
| continue; |
| } |
| |
| /* |
| * The BegRun lies within this DataIN sequence. |
| */ |
| if ((seq->first_datasn <= begrun) && |
| (seq->last_datasn >= begrun)) { |
| pr_err("Found sequence begrun: 0x%08x in" |
| " 0x%08x -> 0x%08x\n", begrun, |
| seq->first_datasn, seq->last_datasn); |
| |
| seq_send_order = seq->seq_send_order; |
| data_sn = seq->first_datasn; |
| seq->next_burst_len = seq->pdu_send_order = 0; |
| found_seq = 1; |
| |
| /* |
| * For DataPDUInOrder=Yes, while the first DataSN of |
| * the sequence is less than the received BegRun, add |
| * the MaxRecvDataSegmentLength to read_data_done and |
| * to the sequence's next_burst_len; |
| * |
| * For DataPDUInOrder=No, while the first DataSN of the |
| * sequence is less than the received BegRun, find the |
| * struct iscsi_pdu of the DataSN in question and add the |
| * MaxRecvDataSegmentLength to read_data_done and to the |
| * sequence's next_burst_len; |
| */ |
| if (conn->sess->sess_ops->DataPDUInOrder) { |
| while (data_sn < begrun) { |
| seq->pdu_send_order++; |
| read_data_done += |
| conn->conn_ops->MaxRecvDataSegmentLength; |
| seq->next_burst_len += |
| conn->conn_ops->MaxRecvDataSegmentLength; |
| data_sn++; |
| } |
| } else { |
| int j; |
| struct iscsi_pdu *pdu; |
| |
| while (data_sn < begrun) { |
| seq->pdu_send_order++; |
| |
| for (j = 0; j < seq->pdu_count; j++) { |
| pdu = &cmd->pdu_list[ |
| seq->pdu_start + j]; |
| if (pdu->data_sn == data_sn) { |
| read_data_done += |
| pdu->length; |
| seq->next_burst_len += |
| pdu->length; |
| } |
| } |
| data_sn++; |
| } |
| } |
| continue; |
| } |
| |
| /* |
| * This DataIN sequence is larger than the received BegRun, |
| * reset seq->pdu_send_order and continue. |
| */ |
| if ((seq->first_datasn > begrun) || |
| (seq->last_datasn > begrun)) { |
| pr_err("Post BegRun sequence 0x%08x -> 0x%08x\n", |
| seq->first_datasn, seq->last_datasn); |
| |
| seq->next_burst_len = seq->pdu_send_order = 0; |
| continue; |
| } |
| } |
| |
| if (!found_seq) { |
| if (!begrun) { |
| if (!first_seq) { |
| pr_err("ITT: 0x%08x, Begrun: 0x%08x" |
| " but first_seq is NULL\n", |
| cmd->init_task_tag, begrun); |
| return -1; |
| } |
| seq_send_order = first_seq->seq_send_order; |
| seq->next_burst_len = seq->pdu_send_order = 0; |
| goto done; |
| } |
| |
| pr_err("Unable to locate struct iscsi_seq for ITT: 0x%08x," |
| " BegRun: 0x%08x, RunLength: 0x%08x while" |
| " DataSequenceInOrder=No and DataPDUInOrder=%s.\n", |
| cmd->init_task_tag, begrun, runlength, |
| (conn->sess->sess_ops->DataPDUInOrder) ? "Yes" : "No"); |
| return -1; |
| } |
| |
| done: |
| dr->read_data_done = read_data_done; |
| dr->seq_send_order = seq_send_order; |
| |
| return 0; |
| } |
| |
| static int iscsit_handle_recovery_datain( |
| struct iscsi_cmd *cmd, |
| unsigned char *buf, |
| u32 begrun, |
| u32 runlength) |
| { |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_datain_req *dr; |
| struct se_cmd *se_cmd = &cmd->se_cmd; |
| |
| if (!(se_cmd->transport_state & CMD_T_COMPLETE)) { |
| pr_err("Ignoring ITT: 0x%08x Data SNACK\n", |
| cmd->init_task_tag); |
| return 0; |
| } |
| |
| /* |
| * Make sure the initiator is not requesting retransmission |
| * of DataSNs already acknowledged by a Data ACK SNACK. |
| */ |
| if ((cmd->cmd_flags & ICF_GOT_DATACK_SNACK) && |
| (begrun <= cmd->acked_data_sn)) { |
| pr_err("ITT: 0x%08x, Data SNACK requesting" |
| " retransmission of DataSN: 0x%08x to 0x%08x but" |
| " already acked to DataSN: 0x%08x by Data ACK SNACK," |
| " protocol error.\n", cmd->init_task_tag, begrun, |
| (begrun + runlength), cmd->acked_data_sn); |
| |
| return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR, |
| 1, 0, buf, cmd); |
| } |
| |
| /* |
| * Make sure BegRun and RunLength in the Data SNACK are sane. |
| * Note: (cmd->data_sn - 1) will carry the maximum DataSN sent. |
| */ |
| if ((begrun + runlength) > (cmd->data_sn - 1)) { |
| pr_err("Initiator requesting BegRun: 0x%08x, RunLength" |
| ": 0x%08x greater than maximum DataSN: 0x%08x.\n", |
| begrun, runlength, (cmd->data_sn - 1)); |
| return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID, |
| 1, 0, buf, cmd); |
| } |
| |
| dr = iscsit_allocate_datain_req(); |
| if (!dr) |
| return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_NO_RESOURCES, |
| 1, 0, buf, cmd); |
| |
| dr->data_sn = dr->begrun = begrun; |
| dr->runlength = runlength; |
| dr->generate_recovery_values = 1; |
| dr->recovery = DATAIN_WITHIN_COMMAND_RECOVERY; |
| |
| iscsit_attach_datain_req(cmd, dr); |
| |
| cmd->i_state = ISTATE_SEND_DATAIN; |
| iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); |
| |
| return 0; |
| } |
| |
| int iscsit_handle_recovery_datain_or_r2t( |
| struct iscsi_conn *conn, |
| unsigned char *buf, |
| itt_t init_task_tag, |
| u32 targ_xfer_tag, |
| u32 begrun, |
| u32 runlength) |
| { |
| struct iscsi_cmd *cmd; |
| |
| cmd = iscsit_find_cmd_from_itt(conn, init_task_tag); |
| if (!cmd) |
| return 0; |
| |
| /* |
| * FIXME: This will not work for bidi commands. |
| */ |
| switch (cmd->data_direction) { |
| case DMA_TO_DEVICE: |
| return iscsit_handle_r2t_snack(cmd, buf, begrun, runlength); |
| case DMA_FROM_DEVICE: |
| return iscsit_handle_recovery_datain(cmd, buf, begrun, |
| runlength); |
| default: |
| pr_err("Unknown cmd->data_direction: 0x%02x\n", |
| cmd->data_direction); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* #warning FIXME: Status SNACK needs to be dependent on OPCODE!!! */ |
| int iscsit_handle_status_snack( |
| struct iscsi_conn *conn, |
| itt_t init_task_tag, |
| u32 targ_xfer_tag, |
| u32 begrun, |
| u32 runlength) |
| { |
| struct iscsi_cmd *cmd = NULL; |
| u32 last_statsn; |
| int found_cmd; |
| |
| if (conn->exp_statsn > begrun) { |
| pr_err("Got Status SNACK Begrun: 0x%08x, RunLength:" |
| " 0x%08x but already got ExpStatSN: 0x%08x on CID:" |
| " %hu.\n", begrun, runlength, conn->exp_statsn, |
| conn->cid); |
| return 0; |
| } |
| |
| last_statsn = (!runlength) ? conn->stat_sn : (begrun + runlength); |
| |
| while (begrun < last_statsn) { |
| found_cmd = 0; |
| |
| spin_lock_bh(&conn->cmd_lock); |
| list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) { |
| if (cmd->stat_sn == begrun) { |
| found_cmd = 1; |
| break; |
| } |
| } |
| spin_unlock_bh(&conn->cmd_lock); |
| |
| if (!found_cmd) { |
| pr_err("Unable to find StatSN: 0x%08x for" |
| " a Status SNACK, assuming this was a" |
| " protactic SNACK for an untransmitted" |
| " StatSN, ignoring.\n", begrun); |
| begrun++; |
| continue; |
| } |
| |
| spin_lock_bh(&cmd->istate_lock); |
| if (cmd->i_state == ISTATE_SEND_DATAIN) { |
| spin_unlock_bh(&cmd->istate_lock); |
| pr_err("Ignoring Status SNACK for BegRun:" |
| " 0x%08x, RunLength: 0x%08x, assuming this was" |
| " a protactic SNACK for an untransmitted" |
| " StatSN\n", begrun, runlength); |
| begrun++; |
| continue; |
| } |
| spin_unlock_bh(&cmd->istate_lock); |
| |
| cmd->i_state = ISTATE_SEND_STATUS_RECOVERY; |
| iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); |
| begrun++; |
| } |
| |
| return 0; |
| } |
| |
| int iscsit_handle_data_ack( |
| struct iscsi_conn *conn, |
| u32 targ_xfer_tag, |
| u32 begrun, |
| u32 runlength) |
| { |
| struct iscsi_cmd *cmd = NULL; |
| |
| cmd = iscsit_find_cmd_from_ttt(conn, targ_xfer_tag); |
| if (!cmd) { |
| pr_err("Data ACK SNACK for TTT: 0x%08x is" |
| " invalid.\n", targ_xfer_tag); |
| return -1; |
| } |
| |
| if (begrun <= cmd->acked_data_sn) { |
| pr_err("ITT: 0x%08x Data ACK SNACK BegRUN: 0x%08x is" |
| " less than the already acked DataSN: 0x%08x.\n", |
| cmd->init_task_tag, begrun, cmd->acked_data_sn); |
| return -1; |
| } |
| |
| /* |
| * For Data ACK SNACK, BegRun is the next expected DataSN. |
| * (see iSCSI v19: 10.16.6) |
| */ |
| cmd->cmd_flags |= ICF_GOT_DATACK_SNACK; |
| cmd->acked_data_sn = (begrun - 1); |
| |
| pr_debug("Received Data ACK SNACK for ITT: 0x%08x," |
| " updated acked DataSN to 0x%08x.\n", |
| cmd->init_task_tag, cmd->acked_data_sn); |
| |
| return 0; |
| } |
| |
| static int iscsit_send_recovery_r2t( |
| struct iscsi_cmd *cmd, |
| u32 offset, |
| u32 xfer_len) |
| { |
| int ret; |
| |
| spin_lock_bh(&cmd->r2t_lock); |
| ret = iscsit_add_r2t_to_list(cmd, offset, xfer_len, 1, 0); |
| spin_unlock_bh(&cmd->r2t_lock); |
| |
| return ret; |
| } |
| |
| int iscsit_dataout_datapduinorder_no_fbit( |
| struct iscsi_cmd *cmd, |
| struct iscsi_pdu *pdu) |
| { |
| int i, send_recovery_r2t = 0, recovery = 0; |
| u32 length = 0, offset = 0, pdu_count = 0, xfer_len = 0; |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_pdu *first_pdu = NULL; |
| |
| /* |
| * Get an struct iscsi_pdu pointer to the first PDU, and total PDU count |
| * of the DataOUT sequence. |
| */ |
| if (conn->sess->sess_ops->DataSequenceInOrder) { |
| for (i = 0; i < cmd->pdu_count; i++) { |
| if (cmd->pdu_list[i].seq_no == pdu->seq_no) { |
| if (!first_pdu) |
| first_pdu = &cmd->pdu_list[i]; |
| xfer_len += cmd->pdu_list[i].length; |
| pdu_count++; |
| } else if (pdu_count) |
| break; |
| } |
| } else { |
| struct iscsi_seq *seq = cmd->seq_ptr; |
| |
| first_pdu = &cmd->pdu_list[seq->pdu_start]; |
| pdu_count = seq->pdu_count; |
| } |
| |
| if (!first_pdu || !pdu_count) |
| return DATAOUT_CANNOT_RECOVER; |
| |
| /* |
| * Loop through the ending DataOUT Sequence checking each struct iscsi_pdu. |
| * The following ugly logic does batching of not received PDUs. |
| */ |
| for (i = 0; i < pdu_count; i++) { |
| if (first_pdu[i].status == ISCSI_PDU_RECEIVED_OK) { |
| if (!send_recovery_r2t) |
| continue; |
| |
| if (iscsit_send_recovery_r2t(cmd, offset, length) < 0) |
| return DATAOUT_CANNOT_RECOVER; |
| |
| send_recovery_r2t = length = offset = 0; |
| continue; |
| } |
| /* |
| * Set recovery = 1 for any missing, CRC failed, or timed |
| * out PDUs to let the DataOUT logic know that this sequence |
| * has not been completed yet. |
| * |
| * Also, only send a Recovery R2T for ISCSI_PDU_NOT_RECEIVED. |
| * We assume if the PDU either failed CRC or timed out |
| * that a Recovery R2T has already been sent. |
| */ |
| recovery = 1; |
| |
| if (first_pdu[i].status != ISCSI_PDU_NOT_RECEIVED) |
| continue; |
| |
| if (!offset) |
| offset = first_pdu[i].offset; |
| length += first_pdu[i].length; |
| |
| send_recovery_r2t = 1; |
| } |
| |
| if (send_recovery_r2t) |
| if (iscsit_send_recovery_r2t(cmd, offset, length) < 0) |
| return DATAOUT_CANNOT_RECOVER; |
| |
| return (!recovery) ? DATAOUT_NORMAL : DATAOUT_WITHIN_COMMAND_RECOVERY; |
| } |
| |
| static int iscsit_recalculate_dataout_values( |
| struct iscsi_cmd *cmd, |
| u32 pdu_offset, |
| u32 pdu_length, |
| u32 *r2t_offset, |
| u32 *r2t_length) |
| { |
| int i; |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_pdu *pdu = NULL; |
| |
| if (conn->sess->sess_ops->DataSequenceInOrder) { |
| cmd->data_sn = 0; |
| |
| if (conn->sess->sess_ops->DataPDUInOrder) { |
| *r2t_offset = cmd->write_data_done; |
| *r2t_length = (cmd->seq_end_offset - |
| cmd->write_data_done); |
| return 0; |
| } |
| |
| *r2t_offset = cmd->seq_start_offset; |
| *r2t_length = (cmd->seq_end_offset - cmd->seq_start_offset); |
| |
| for (i = 0; i < cmd->pdu_count; i++) { |
| pdu = &cmd->pdu_list[i]; |
| |
| if (pdu->status != ISCSI_PDU_RECEIVED_OK) |
| continue; |
| |
| if ((pdu->offset >= cmd->seq_start_offset) && |
| ((pdu->offset + pdu->length) <= |
| cmd->seq_end_offset)) { |
| if (!cmd->unsolicited_data) |
| cmd->next_burst_len -= pdu->length; |
| else |
| cmd->first_burst_len -= pdu->length; |
| |
| cmd->write_data_done -= pdu->length; |
| pdu->status = ISCSI_PDU_NOT_RECEIVED; |
| } |
| } |
| } else { |
| struct iscsi_seq *seq = NULL; |
| |
| seq = iscsit_get_seq_holder(cmd, pdu_offset, pdu_length); |
| if (!seq) |
| return -1; |
| |
| *r2t_offset = seq->orig_offset; |
| *r2t_length = seq->xfer_len; |
| |
| cmd->write_data_done -= (seq->offset - seq->orig_offset); |
| if (cmd->immediate_data) |
| cmd->first_burst_len = cmd->write_data_done; |
| |
| seq->data_sn = 0; |
| seq->offset = seq->orig_offset; |
| seq->next_burst_len = 0; |
| seq->status = DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY; |
| |
| if (conn->sess->sess_ops->DataPDUInOrder) |
| return 0; |
| |
| for (i = 0; i < seq->pdu_count; i++) { |
| pdu = &cmd->pdu_list[i+seq->pdu_start]; |
| |
| if (pdu->status != ISCSI_PDU_RECEIVED_OK) |
| continue; |
| |
| pdu->status = ISCSI_PDU_NOT_RECEIVED; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int iscsit_recover_dataout_sequence( |
| struct iscsi_cmd *cmd, |
| u32 pdu_offset, |
| u32 pdu_length) |
| { |
| u32 r2t_length = 0, r2t_offset = 0; |
| |
| spin_lock_bh(&cmd->istate_lock); |
| cmd->cmd_flags |= ICF_WITHIN_COMMAND_RECOVERY; |
| spin_unlock_bh(&cmd->istate_lock); |
| |
| if (iscsit_recalculate_dataout_values(cmd, pdu_offset, pdu_length, |
| &r2t_offset, &r2t_length) < 0) |
| return DATAOUT_CANNOT_RECOVER; |
| |
| iscsit_send_recovery_r2t(cmd, r2t_offset, r2t_length); |
| |
| return DATAOUT_WITHIN_COMMAND_RECOVERY; |
| } |
| |
| static struct iscsi_ooo_cmdsn *iscsit_allocate_ooo_cmdsn(void) |
| { |
| struct iscsi_ooo_cmdsn *ooo_cmdsn = NULL; |
| |
| ooo_cmdsn = kmem_cache_zalloc(lio_ooo_cache, GFP_ATOMIC); |
| if (!ooo_cmdsn) { |
| pr_err("Unable to allocate memory for" |
| " struct iscsi_ooo_cmdsn.\n"); |
| return NULL; |
| } |
| INIT_LIST_HEAD(&ooo_cmdsn->ooo_list); |
| |
| return ooo_cmdsn; |
| } |
| |
| /* |
| * Called with sess->cmdsn_mutex held. |
| */ |
| static int iscsit_attach_ooo_cmdsn( |
| struct iscsi_session *sess, |
| struct iscsi_ooo_cmdsn *ooo_cmdsn) |
| { |
| struct iscsi_ooo_cmdsn *ooo_tail, *ooo_tmp; |
| /* |
| * We attach the struct iscsi_ooo_cmdsn entry to the out of order |
| * list in increasing CmdSN order. |
| * This allows iscsi_execute_ooo_cmdsns() to detect any |
| * additional CmdSN holes while performing delayed execution. |
| */ |
| if (list_empty(&sess->sess_ooo_cmdsn_list)) |
| list_add_tail(&ooo_cmdsn->ooo_list, |
| &sess->sess_ooo_cmdsn_list); |
| else { |
| ooo_tail = list_entry(sess->sess_ooo_cmdsn_list.prev, |
| typeof(*ooo_tail), ooo_list); |
| /* |
| * CmdSN is greater than the tail of the list. |
| */ |
| if (ooo_tail->cmdsn < ooo_cmdsn->cmdsn) |
| list_add_tail(&ooo_cmdsn->ooo_list, |
| &sess->sess_ooo_cmdsn_list); |
| else { |
| /* |
| * CmdSN is either lower than the head, or somewhere |
| * in the middle. |
| */ |
| list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list, |
| ooo_list) { |
| if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) |
| continue; |
| |
| list_add(&ooo_cmdsn->ooo_list, |
| &ooo_tmp->ooo_list); |
| break; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Removes an struct iscsi_ooo_cmdsn from a session's list, |
| * called with struct iscsi_session->cmdsn_mutex held. |
| */ |
| void iscsit_remove_ooo_cmdsn( |
| struct iscsi_session *sess, |
| struct iscsi_ooo_cmdsn *ooo_cmdsn) |
| { |
| list_del(&ooo_cmdsn->ooo_list); |
| kmem_cache_free(lio_ooo_cache, ooo_cmdsn); |
| } |
| |
| void iscsit_clear_ooo_cmdsns_for_conn(struct iscsi_conn *conn) |
| { |
| struct iscsi_ooo_cmdsn *ooo_cmdsn; |
| struct iscsi_session *sess = conn->sess; |
| |
| mutex_lock(&sess->cmdsn_mutex); |
| list_for_each_entry(ooo_cmdsn, &sess->sess_ooo_cmdsn_list, ooo_list) { |
| if (ooo_cmdsn->cid != conn->cid) |
| continue; |
| |
| ooo_cmdsn->cmd = NULL; |
| } |
| mutex_unlock(&sess->cmdsn_mutex); |
| } |
| |
| /* |
| * Called with sess->cmdsn_mutex held. |
| */ |
| int iscsit_execute_ooo_cmdsns(struct iscsi_session *sess) |
| { |
| int ooo_count = 0; |
| struct iscsi_cmd *cmd = NULL; |
| struct iscsi_ooo_cmdsn *ooo_cmdsn, *ooo_cmdsn_tmp; |
| |
| list_for_each_entry_safe(ooo_cmdsn, ooo_cmdsn_tmp, |
| &sess->sess_ooo_cmdsn_list, ooo_list) { |
| if (ooo_cmdsn->cmdsn != sess->exp_cmd_sn) |
| continue; |
| |
| if (!ooo_cmdsn->cmd) { |
| sess->exp_cmd_sn++; |
| iscsit_remove_ooo_cmdsn(sess, ooo_cmdsn); |
| continue; |
| } |
| |
| cmd = ooo_cmdsn->cmd; |
| cmd->i_state = cmd->deferred_i_state; |
| ooo_count++; |
| sess->exp_cmd_sn++; |
| pr_debug("Executing out of order CmdSN: 0x%08x," |
| " incremented ExpCmdSN to 0x%08x.\n", |
| cmd->cmd_sn, sess->exp_cmd_sn); |
| |
| iscsit_remove_ooo_cmdsn(sess, ooo_cmdsn); |
| |
| if (iscsit_execute_cmd(cmd, 1) < 0) |
| return -1; |
| |
| continue; |
| } |
| |
| return ooo_count; |
| } |
| |
| /* |
| * Called either: |
| * |
| * 1. With sess->cmdsn_mutex held from iscsi_execute_ooo_cmdsns() |
| * or iscsi_check_received_cmdsn(). |
| * 2. With no locks held directly from iscsi_handle_XXX_pdu() functions |
| * for immediate commands. |
| */ |
| int iscsit_execute_cmd(struct iscsi_cmd *cmd, int ooo) |
| { |
| struct se_cmd *se_cmd = &cmd->se_cmd; |
| int lr = 0; |
| |
| spin_lock_bh(&cmd->istate_lock); |
| if (ooo) |
| cmd->cmd_flags &= ~ICF_OOO_CMDSN; |
| |
| switch (cmd->iscsi_opcode) { |
| case ISCSI_OP_SCSI_CMD: |
| /* |
| * Go ahead and send the CHECK_CONDITION status for |
| * any SCSI CDB exceptions that may have occurred, also |
| * handle the SCF_SCSI_RESERVATION_CONFLICT case here as well. |
| */ |
| if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) { |
| if (se_cmd->scsi_sense_reason == TCM_RESERVATION_CONFLICT) { |
| cmd->i_state = ISTATE_SEND_STATUS; |
| spin_unlock_bh(&cmd->istate_lock); |
| iscsit_add_cmd_to_response_queue(cmd, cmd->conn, |
| cmd->i_state); |
| return 0; |
| } |
| spin_unlock_bh(&cmd->istate_lock); |
| /* |
| * Determine if delayed TASK_ABORTED status for WRITEs |
| * should be sent now if no unsolicited data out |
| * payloads are expected, or if the delayed status |
| * should be sent after unsolicited data out with |
| * ISCSI_FLAG_CMD_FINAL set in iscsi_handle_data_out() |
| */ |
| if (transport_check_aborted_status(se_cmd, |
| (cmd->unsolicited_data == 0)) != 0) |
| return 0; |
| /* |
| * Otherwise send CHECK_CONDITION and sense for |
| * exception |
| */ |
| return transport_send_check_condition_and_sense(se_cmd, |
| se_cmd->scsi_sense_reason, 0); |
| } |
| /* |
| * Special case for delayed CmdSN with Immediate |
| * Data and/or Unsolicited Data Out attached. |
| */ |
| if (cmd->immediate_data) { |
| if (cmd->cmd_flags & ICF_GOT_LAST_DATAOUT) { |
| spin_unlock_bh(&cmd->istate_lock); |
| target_execute_cmd(&cmd->se_cmd); |
| return 0; |
| } |
| spin_unlock_bh(&cmd->istate_lock); |
| |
| if (!(cmd->cmd_flags & |
| ICF_NON_IMMEDIATE_UNSOLICITED_DATA)) { |
| /* |
| * Send the delayed TASK_ABORTED status for |
| * WRITEs if no more unsolicitied data is |
| * expected. |
| */ |
| if (transport_check_aborted_status(se_cmd, 1) |
| != 0) |
| return 0; |
| |
| iscsit_set_dataout_sequence_values(cmd); |
| iscsit_build_r2ts_for_cmd(cmd, cmd->conn, false); |
| } |
| return 0; |
| } |
| /* |
| * The default handler. |
| */ |
| spin_unlock_bh(&cmd->istate_lock); |
| |
| if ((cmd->data_direction == DMA_TO_DEVICE) && |
| !(cmd->cmd_flags & ICF_NON_IMMEDIATE_UNSOLICITED_DATA)) { |
| /* |
| * Send the delayed TASK_ABORTED status for WRITEs if |
| * no more nsolicitied data is expected. |
| */ |
| if (transport_check_aborted_status(se_cmd, 1) != 0) |
| return 0; |
| |
| iscsit_set_dataout_sequence_values(cmd); |
| spin_lock_bh(&cmd->dataout_timeout_lock); |
| iscsit_start_dataout_timer(cmd, cmd->conn); |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| } |
| return transport_handle_cdb_direct(&cmd->se_cmd); |
| |
| case ISCSI_OP_NOOP_OUT: |
| case ISCSI_OP_TEXT: |
| spin_unlock_bh(&cmd->istate_lock); |
| iscsit_add_cmd_to_response_queue(cmd, cmd->conn, cmd->i_state); |
| break; |
| case ISCSI_OP_SCSI_TMFUNC: |
| if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) { |
| spin_unlock_bh(&cmd->istate_lock); |
| iscsit_add_cmd_to_response_queue(cmd, cmd->conn, |
| cmd->i_state); |
| return 0; |
| } |
| spin_unlock_bh(&cmd->istate_lock); |
| |
| return transport_generic_handle_tmr(&cmd->se_cmd); |
| case ISCSI_OP_LOGOUT: |
| spin_unlock_bh(&cmd->istate_lock); |
| switch (cmd->logout_reason) { |
| case ISCSI_LOGOUT_REASON_CLOSE_SESSION: |
| lr = iscsit_logout_closesession(cmd, cmd->conn); |
| break; |
| case ISCSI_LOGOUT_REASON_CLOSE_CONNECTION: |
| lr = iscsit_logout_closeconnection(cmd, cmd->conn); |
| break; |
| case ISCSI_LOGOUT_REASON_RECOVERY: |
| lr = iscsit_logout_removeconnforrecovery(cmd, cmd->conn); |
| break; |
| default: |
| pr_err("Unknown iSCSI Logout Request Code:" |
| " 0x%02x\n", cmd->logout_reason); |
| return -1; |
| } |
| |
| return lr; |
| default: |
| spin_unlock_bh(&cmd->istate_lock); |
| pr_err("Cannot perform out of order execution for" |
| " unknown iSCSI Opcode: 0x%02x\n", cmd->iscsi_opcode); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| void iscsit_free_all_ooo_cmdsns(struct iscsi_session *sess) |
| { |
| struct iscsi_ooo_cmdsn *ooo_cmdsn, *ooo_cmdsn_tmp; |
| |
| mutex_lock(&sess->cmdsn_mutex); |
| list_for_each_entry_safe(ooo_cmdsn, ooo_cmdsn_tmp, |
| &sess->sess_ooo_cmdsn_list, ooo_list) { |
| |
| list_del(&ooo_cmdsn->ooo_list); |
| kmem_cache_free(lio_ooo_cache, ooo_cmdsn); |
| } |
| mutex_unlock(&sess->cmdsn_mutex); |
| } |
| |
| int iscsit_handle_ooo_cmdsn( |
| struct iscsi_session *sess, |
| struct iscsi_cmd *cmd, |
| u32 cmdsn) |
| { |
| int batch = 0; |
| struct iscsi_ooo_cmdsn *ooo_cmdsn = NULL, *ooo_tail = NULL; |
| |
| cmd->deferred_i_state = cmd->i_state; |
| cmd->i_state = ISTATE_DEFERRED_CMD; |
| cmd->cmd_flags |= ICF_OOO_CMDSN; |
| |
| if (list_empty(&sess->sess_ooo_cmdsn_list)) |
| batch = 1; |
| else { |
| ooo_tail = list_entry(sess->sess_ooo_cmdsn_list.prev, |
| typeof(*ooo_tail), ooo_list); |
| if (ooo_tail->cmdsn != (cmdsn - 1)) |
| batch = 1; |
| } |
| |
| ooo_cmdsn = iscsit_allocate_ooo_cmdsn(); |
| if (!ooo_cmdsn) |
| return CMDSN_ERROR_CANNOT_RECOVER; |
| |
| ooo_cmdsn->cmd = cmd; |
| ooo_cmdsn->batch_count = (batch) ? |
| (cmdsn - sess->exp_cmd_sn) : 1; |
| ooo_cmdsn->cid = cmd->conn->cid; |
| ooo_cmdsn->exp_cmdsn = sess->exp_cmd_sn; |
| ooo_cmdsn->cmdsn = cmdsn; |
| |
| if (iscsit_attach_ooo_cmdsn(sess, ooo_cmdsn) < 0) { |
| kmem_cache_free(lio_ooo_cache, ooo_cmdsn); |
| return CMDSN_ERROR_CANNOT_RECOVER; |
| } |
| |
| return CMDSN_HIGHER_THAN_EXP; |
| } |
| |
| static int iscsit_set_dataout_timeout_values( |
| struct iscsi_cmd *cmd, |
| u32 *offset, |
| u32 *length) |
| { |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_r2t *r2t; |
| |
| if (cmd->unsolicited_data) { |
| *offset = 0; |
| *length = (conn->sess->sess_ops->FirstBurstLength > |
| cmd->se_cmd.data_length) ? |
| cmd->se_cmd.data_length : |
| conn->sess->sess_ops->FirstBurstLength; |
| return 0; |
| } |
| |
| spin_lock_bh(&cmd->r2t_lock); |
| if (list_empty(&cmd->cmd_r2t_list)) { |
| pr_err("cmd->cmd_r2t_list is empty!\n"); |
| spin_unlock_bh(&cmd->r2t_lock); |
| return -1; |
| } |
| |
| list_for_each_entry(r2t, &cmd->cmd_r2t_list, r2t_list) { |
| if (r2t->sent_r2t && !r2t->recovery_r2t && !r2t->seq_complete) { |
| *offset = r2t->offset; |
| *length = r2t->xfer_len; |
| spin_unlock_bh(&cmd->r2t_lock); |
| return 0; |
| } |
| } |
| spin_unlock_bh(&cmd->r2t_lock); |
| |
| pr_err("Unable to locate any incomplete DataOUT" |
| " sequences for ITT: 0x%08x.\n", cmd->init_task_tag); |
| |
| return -1; |
| } |
| |
| /* |
| * NOTE: Called from interrupt (timer) context. |
| */ |
| static void iscsit_handle_dataout_timeout(unsigned long data) |
| { |
| u32 pdu_length = 0, pdu_offset = 0; |
| u32 r2t_length = 0, r2t_offset = 0; |
| struct iscsi_cmd *cmd = (struct iscsi_cmd *) data; |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_session *sess = NULL; |
| struct iscsi_node_attrib *na; |
| |
| iscsit_inc_conn_usage_count(conn); |
| |
| spin_lock_bh(&cmd->dataout_timeout_lock); |
| if (cmd->dataout_timer_flags & ISCSI_TF_STOP) { |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| iscsit_dec_conn_usage_count(conn); |
| return; |
| } |
| cmd->dataout_timer_flags &= ~ISCSI_TF_RUNNING; |
| sess = conn->sess; |
| na = iscsit_tpg_get_node_attrib(sess); |
| |
| if (!sess->sess_ops->ErrorRecoveryLevel) { |
| pr_debug("Unable to recover from DataOut timeout while" |
| " in ERL=0.\n"); |
| goto failure; |
| } |
| |
| if (++cmd->dataout_timeout_retries == na->dataout_timeout_retries) { |
| pr_debug("Command ITT: 0x%08x exceeded max retries" |
| " for DataOUT timeout %u, closing iSCSI connection.\n", |
| cmd->init_task_tag, na->dataout_timeout_retries); |
| goto failure; |
| } |
| |
| cmd->cmd_flags |= ICF_WITHIN_COMMAND_RECOVERY; |
| |
| if (conn->sess->sess_ops->DataSequenceInOrder) { |
| if (conn->sess->sess_ops->DataPDUInOrder) { |
| pdu_offset = cmd->write_data_done; |
| if ((pdu_offset + (conn->sess->sess_ops->MaxBurstLength - |
| cmd->next_burst_len)) > cmd->se_cmd.data_length) |
| pdu_length = (cmd->se_cmd.data_length - |
| cmd->write_data_done); |
| else |
| pdu_length = (conn->sess->sess_ops->MaxBurstLength - |
| cmd->next_burst_len); |
| } else { |
| pdu_offset = cmd->seq_start_offset; |
| pdu_length = (cmd->seq_end_offset - |
| cmd->seq_start_offset); |
| } |
| } else { |
| if (iscsit_set_dataout_timeout_values(cmd, &pdu_offset, |
| &pdu_length) < 0) |
| goto failure; |
| } |
| |
| if (iscsit_recalculate_dataout_values(cmd, pdu_offset, pdu_length, |
| &r2t_offset, &r2t_length) < 0) |
| goto failure; |
| |
| pr_debug("Command ITT: 0x%08x timed out waiting for" |
| " completion of %sDataOUT Sequence Offset: %u, Length: %u\n", |
| cmd->init_task_tag, (cmd->unsolicited_data) ? "Unsolicited " : |
| "", r2t_offset, r2t_length); |
| |
| if (iscsit_send_recovery_r2t(cmd, r2t_offset, r2t_length) < 0) |
| goto failure; |
| |
| iscsit_start_dataout_timer(cmd, conn); |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| iscsit_dec_conn_usage_count(conn); |
| |
| return; |
| |
| failure: |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| iscsit_cause_connection_reinstatement(conn, 0); |
| iscsit_dec_conn_usage_count(conn); |
| } |
| |
| void iscsit_mod_dataout_timer(struct iscsi_cmd *cmd) |
| { |
| struct iscsi_conn *conn = cmd->conn; |
| struct iscsi_session *sess = conn->sess; |
| struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); |
| |
| spin_lock_bh(&cmd->dataout_timeout_lock); |
| if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) { |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| return; |
| } |
| |
| mod_timer(&cmd->dataout_timer, |
| (get_jiffies_64() + na->dataout_timeout * HZ)); |
| pr_debug("Updated DataOUT timer for ITT: 0x%08x", |
| cmd->init_task_tag); |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| } |
| |
| /* |
| * Called with cmd->dataout_timeout_lock held. |
| */ |
| void iscsit_start_dataout_timer( |
| struct iscsi_cmd *cmd, |
| struct iscsi_conn *conn) |
| { |
| struct iscsi_session *sess = conn->sess; |
| struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); |
| |
| if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING) |
| return; |
| |
| pr_debug("Starting DataOUT timer for ITT: 0x%08x on" |
| " CID: %hu.\n", cmd->init_task_tag, conn->cid); |
| |
| init_timer(&cmd->dataout_timer); |
| cmd->dataout_timer.expires = (get_jiffies_64() + na->dataout_timeout * HZ); |
| cmd->dataout_timer.data = (unsigned long)cmd; |
| cmd->dataout_timer.function = iscsit_handle_dataout_timeout; |
| cmd->dataout_timer_flags &= ~ISCSI_TF_STOP; |
| cmd->dataout_timer_flags |= ISCSI_TF_RUNNING; |
| add_timer(&cmd->dataout_timer); |
| } |
| |
| void iscsit_stop_dataout_timer(struct iscsi_cmd *cmd) |
| { |
| spin_lock_bh(&cmd->dataout_timeout_lock); |
| if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) { |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| return; |
| } |
| cmd->dataout_timer_flags |= ISCSI_TF_STOP; |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| |
| del_timer_sync(&cmd->dataout_timer); |
| |
| spin_lock_bh(&cmd->dataout_timeout_lock); |
| cmd->dataout_timer_flags &= ~ISCSI_TF_RUNNING; |
| pr_debug("Stopped DataOUT Timer for ITT: 0x%08x\n", |
| cmd->init_task_tag); |
| spin_unlock_bh(&cmd->dataout_timeout_lock); |
| } |