V4L/DVB (7060): em28xx: remove has_tuner
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.
Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.
Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.
Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 368a766..2159d01 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -78,7 +78,6 @@
.is_em2800 = 1,
.vchannels = 2,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
@@ -93,13 +92,14 @@
[EM2820_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/28xx video grabber",
.is_em2800 = 0,
+ .tuner_type = TUNER_ABSENT,
},
[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
.name = "Kworld PVR TV 2800 RF",
.is_em2800 = 0,
.vchannels = 2,
+ .tuner_type = TUNER_TEMIC_PAL,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
@@ -116,7 +116,6 @@
.vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -137,7 +136,6 @@
.vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -160,7 +158,6 @@
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE|
TDA9887_PORT2_ACTIVE,
- .has_tuner = 1,
.decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
/*FIXME: S-Video not tested */
@@ -180,7 +177,6 @@
.vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
- .has_tuner = 1,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
@@ -202,7 +198,6 @@
.vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
- .has_tuner = 1,
.mts_firmware = 1,
.has_12mhz_i2s = 1,
.decoder = EM28XX_TVP5150,
@@ -227,7 +222,6 @@
.name = "Terratec Hybrid XS",
.vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.tuner_type = TUNER_XC2028,
.decoder = EM28XX_TVP5150,
.input = { {
@@ -251,7 +245,6 @@
.name = "Terratec Prodigy XS",
.vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.tuner_type = TUNER_XC2028,
.decoder = EM28XX_TVP5150,
.input = { {
@@ -275,7 +268,6 @@
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
- .has_tuner = 1,
.max_range_640_480 = 1,
.decoder = EM28XX_SAA7114,
@@ -299,7 +291,6 @@
.vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -321,7 +312,6 @@
.vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -343,7 +333,6 @@
.vchannels = 3,
.tuner_type = TUNER_PHILIPS_ATSC,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -362,7 +351,7 @@
[EM2820_BOARD_PINNACLE_DVC_90] = {
.name = "Pinnacle Dazzle DVC 90/DVC 100",
.vchannels = 3,
- .has_tuner = 0,
+ .tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
@@ -380,7 +369,6 @@
.vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -400,7 +388,7 @@
.name = "Pixelview Prolink PlayTV USB 2.0",
.vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
- .has_tuner = 1,
+ .tuner_type = TUNER_YMEC_TVF_5533MF,
.decoder = EM28XX_SAA7113,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -551,7 +539,7 @@
struct tuner_setup tun_setup;
struct v4l2_frequency f;
- if (!dev->has_tuner)
+ if (dev->tuner_type == TUNER_ABSENT)
return;
tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
@@ -668,7 +656,6 @@
static void em28xx_set_model(struct em28xx *dev)
{
dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
- dev->has_tuner = em28xx_boards[dev->model].has_tuner;
dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
dev->decoder = em28xx_boards[dev->model].decoder;
@@ -676,9 +663,6 @@
dev->analog_gpio = em28xx_boards[dev->model].analog_gpio;
dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
-
- if (!em28xx_boards[dev->model].has_tuner)
- dev->tuner_type = UNSET;
}
/* ----------------------------------------------------------------------- */
@@ -745,6 +729,7 @@
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
dev->tuner_type = tv.tuner_type;
+
if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
dev->i2s_speed = 2048000;
dev->has_msp34xx = 1;
@@ -777,7 +762,7 @@
request_module("saa7115");
if (dev->decoder == EM28XX_TVP5150)
request_module("tvp5150");
- if (dev->has_tuner)
+ if (dev->tuner_type != TUNER_ABSENT)
request_module("tuner");
#endif
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index de95ca8..a0c3346 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -38,6 +38,7 @@
#include "em28xx.h"
#include <media/v4l2-common.h>
#include <media/msp3400.h>
+#include <media/tuner.h>
#define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \
"Markus Rechberger <mrechberger@gmail.com>, " \
@@ -928,7 +929,7 @@
V4L2_CAP_AUDIO |
V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
- if (dev->has_tuner)
+ if (dev->tuner_type != TUNER_ABSENT)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
@@ -1900,7 +1901,7 @@
em28xx_errdev("cannot allocate video_device.\n");
goto fail_unreg;
}
- if (dev->has_tuner)
+ if (dev->tuner_type != TUNER_ABSENT)
dev->vdev->type |= VID_TYPE_TUNER;
/* register v4l2 video video_device */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 3ef80d8..f3bad0c 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -161,7 +161,6 @@
unsigned int tda9887_conf;
unsigned int is_em2800:1;
- unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
unsigned int mts_firmware:1;
unsigned int has_12mhz_i2s:1;
@@ -226,7 +225,6 @@
int devno; /* marks the number of this device */
unsigned int analog_gpio;
unsigned int is_em2800:1;
- unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
unsigned int has_tda9887:1;
unsigned int stream_on:1; /* Locks streams */