| /* |
| * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> |
| * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. |
| * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz |
| * |
| * Portions Copyright (C) 1999 Promise Technology, Inc. |
| * Author: Frank Tiernan (frankt@promise.com) |
| * Released under terms of General Public License |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/blkdev.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/ide.h> |
| |
| #include <asm/io.h> |
| |
| #define DRV_NAME "pdc202xx_old" |
| |
| static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
| { |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| u8 drive_pci = 0x60 + (drive->dn << 2); |
| const u8 speed = drive->dma_mode; |
| |
| u8 AP = 0, BP = 0, CP = 0; |
| u8 TA = 0, TB = 0, TC = 0; |
| |
| pci_read_config_byte(dev, drive_pci, &AP); |
| pci_read_config_byte(dev, drive_pci + 1, &BP); |
| pci_read_config_byte(dev, drive_pci + 2, &CP); |
| |
| switch(speed) { |
| case XFER_UDMA_5: |
| case XFER_UDMA_4: TB = 0x20; TC = 0x01; break; |
| case XFER_UDMA_2: TB = 0x20; TC = 0x01; break; |
| case XFER_UDMA_3: |
| case XFER_UDMA_1: TB = 0x40; TC = 0x02; break; |
| case XFER_UDMA_0: |
| case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break; |
| case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break; |
| case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break; |
| case XFER_PIO_4: TA = 0x01; TB = 0x04; break; |
| case XFER_PIO_3: TA = 0x02; TB = 0x06; break; |
| case XFER_PIO_2: TA = 0x03; TB = 0x08; break; |
| case XFER_PIO_1: TA = 0x05; TB = 0x0C; break; |
| case XFER_PIO_0: |
| default: TA = 0x09; TB = 0x13; break; |
| } |
| |
| if (speed < XFER_SW_DMA_0) { |
| /* |
| * preserve SYNC_INT / ERDDY_EN bits while clearing |
| * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A |
| */ |
| AP &= ~0x3f; |
| if (ide_pio_need_iordy(drive, speed - XFER_PIO_0)) |
| AP |= 0x20; /* set IORDY_EN bit */ |
| if (drive->media == ide_disk) |
| AP |= 0x10; /* set Prefetch_EN bit */ |
| /* clear PB[4:0] bits of register B */ |
| BP &= ~0x1f; |
| pci_write_config_byte(dev, drive_pci, AP | TA); |
| pci_write_config_byte(dev, drive_pci + 1, BP | TB); |
| } else { |
| /* clear MB[2:0] bits of register B */ |
| BP &= ~0xe0; |
| /* clear MC[3:0] bits of register C */ |
| CP &= ~0x0f; |
| pci_write_config_byte(dev, drive_pci + 1, BP | TB); |
| pci_write_config_byte(dev, drive_pci + 2, CP | TC); |
| } |
| } |
| |
| static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
| { |
| drive->dma_mode = drive->pio_mode; |
| pdc202xx_set_mode(hwif, drive); |
| } |
| |
| static int pdc202xx_test_irq(ide_hwif_t *hwif) |
| { |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| unsigned long high_16 = pci_resource_start(dev, 4); |
| u8 sc1d = inb(high_16 + 0x1d); |
| |
| if (hwif->channel) { |
| /* |
| * bit 7: error, bit 6: interrupting, |
| * bit 5: FIFO full, bit 4: FIFO empty |
| */ |
| return (sc1d & 0x40) ? 1 : 0; |
| } else { |
| /* |
| * bit 3: error, bit 2: interrupting, |
| * bit 1: FIFO full, bit 0: FIFO empty |
| */ |
| return (sc1d & 0x04) ? 1 : 0; |
| } |
| } |
| |
| static u8 pdc2026x_cable_detect(ide_hwif_t *hwif) |
| { |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10); |
| |
| pci_read_config_word(dev, 0x50, &CIS); |
| |
| return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; |
| } |
| |
| /* |
| * Set the control register to use the 66MHz system |
| * clock for UDMA 3/4/5 mode operation when necessary. |
| * |
| * FIXME: this register is shared by both channels, some locking is needed |
| * |
| * It may also be possible to leave the 66MHz clock on |
| * and readjust the timing parameters. |
| */ |
| static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif) |
| { |
| unsigned long clock_reg = hwif->extra_base + 0x01; |
| u8 clock = inb(clock_reg); |
| |
| outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg); |
| } |
| |
| static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) |
| { |
| unsigned long clock_reg = hwif->extra_base + 0x01; |
| u8 clock = inb(clock_reg); |
| |
| outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); |
| } |
| |
| static void pdc2026x_init_hwif(ide_hwif_t *hwif) |
| { |
| pdc_old_disable_66MHz_clock(hwif); |
| } |
| |
| static void pdc202xx_dma_start(ide_drive_t *drive) |
| { |
| if (drive->current_speed > XFER_UDMA_2) |
| pdc_old_enable_66MHz_clock(drive->hwif); |
| if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) { |
| ide_hwif_t *hwif = drive->hwif; |
| struct request *rq = hwif->rq; |
| unsigned long high_16 = hwif->extra_base - 16; |
| unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); |
| u32 word_count = 0; |
| u8 clock = inb(high_16 + 0x11); |
| |
| outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11); |
| word_count = (blk_rq_sectors(rq) << 8); |
| word_count = (rq_data_dir(rq) == READ) ? |
| word_count | 0x05000000 : |
| word_count | 0x06000000; |
| outl(word_count, atapi_reg); |
| } |
| ide_dma_start(drive); |
| } |
| |
| static int pdc202xx_dma_end(ide_drive_t *drive) |
| { |
| if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) { |
| ide_hwif_t *hwif = drive->hwif; |
| unsigned long high_16 = hwif->extra_base - 16; |
| unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); |
| u8 clock = 0; |
| |
| outl(0, atapi_reg); /* zero out extra */ |
| clock = inb(high_16 + 0x11); |
| outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11); |
| } |
| if (drive->current_speed > XFER_UDMA_2) |
| pdc_old_disable_66MHz_clock(drive->hwif); |
| return ide_dma_end(drive); |
| } |
| |
| static int init_chipset_pdc202xx(struct pci_dev *dev) |
| { |
| unsigned long dmabase = pci_resource_start(dev, 4); |
| u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; |
| |
| if (dmabase == 0) |
| goto out; |
| |
| udma_speed_flag = inb(dmabase | 0x1f); |
| primary_mode = inb(dmabase | 0x1a); |
| secondary_mode = inb(dmabase | 0x1b); |
| printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \ |
| "Primary %s Mode " \ |
| "Secondary %s Mode.\n", pci_name(dev), |
| (udma_speed_flag & 1) ? "EN" : "DIS", |
| (primary_mode & 1) ? "MASTER" : "PCI", |
| (secondary_mode & 1) ? "MASTER" : "PCI" ); |
| |
| if (!(udma_speed_flag & 1)) { |
| printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ", |
| pci_name(dev), udma_speed_flag, |
| (udma_speed_flag|1)); |
| outb(udma_speed_flag | 1, dmabase | 0x1f); |
| printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); |
| } |
| out: |
| return 0; |
| } |
| |
| static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, |
| const char *name) |
| { |
| if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) { |
| u8 irq = 0, irq2 = 0; |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
| /* 0xbc */ |
| pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2); |
| if (irq != irq2) { |
| pci_write_config_byte(dev, |
| (PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */ |
| printk(KERN_INFO "%s %s: PCI config space interrupt " |
| "mirror fixed\n", name, pci_name(dev)); |
| } |
| } |
| } |
| |
| #define IDE_HFLAGS_PDC202XX \ |
| (IDE_HFLAG_ERROR_STOPS_FIFO | \ |
| IDE_HFLAG_OFF_BOARD) |
| |
| static const struct ide_port_ops pdc20246_port_ops = { |
| .set_pio_mode = pdc202xx_set_pio_mode, |
| .set_dma_mode = pdc202xx_set_mode, |
| .test_irq = pdc202xx_test_irq, |
| }; |
| |
| static const struct ide_port_ops pdc2026x_port_ops = { |
| .set_pio_mode = pdc202xx_set_pio_mode, |
| .set_dma_mode = pdc202xx_set_mode, |
| .test_irq = pdc202xx_test_irq, |
| .cable_detect = pdc2026x_cable_detect, |
| }; |
| |
| static const struct ide_dma_ops pdc2026x_dma_ops = { |
| .dma_host_set = ide_dma_host_set, |
| .dma_setup = ide_dma_setup, |
| .dma_start = pdc202xx_dma_start, |
| .dma_end = pdc202xx_dma_end, |
| .dma_test_irq = ide_dma_test_irq, |
| .dma_lost_irq = ide_dma_lost_irq, |
| .dma_timer_expiry = ide_dma_sff_timer_expiry, |
| .dma_sff_read_status = ide_dma_sff_read_status, |
| }; |
| |
| #define DECLARE_PDC2026X_DEV(udma, sectors) \ |
| { \ |
| .name = DRV_NAME, \ |
| .init_chipset = init_chipset_pdc202xx, \ |
| .init_hwif = pdc2026x_init_hwif, \ |
| .port_ops = &pdc2026x_port_ops, \ |
| .dma_ops = &pdc2026x_dma_ops, \ |
| .host_flags = IDE_HFLAGS_PDC202XX, \ |
| .pio_mask = ATA_PIO4, \ |
| .mwdma_mask = ATA_MWDMA2, \ |
| .udma_mask = udma, \ |
| .max_sectors = sectors, \ |
| } |
| |
| static const struct ide_port_info pdc202xx_chipsets[] __devinitconst = { |
| { /* 0: PDC20246 */ |
| .name = DRV_NAME, |
| .init_chipset = init_chipset_pdc202xx, |
| .port_ops = &pdc20246_port_ops, |
| .dma_ops = &sff_dma_ops, |
| .host_flags = IDE_HFLAGS_PDC202XX, |
| .pio_mask = ATA_PIO4, |
| .mwdma_mask = ATA_MWDMA2, |
| .udma_mask = ATA_UDMA2, |
| }, |
| |
| /* 1: PDC2026{2,3} */ |
| DECLARE_PDC2026X_DEV(ATA_UDMA4, 0), |
| /* 2: PDC2026{5,7}: UDMA5, limit LBA48 requests to 256 sectors */ |
| DECLARE_PDC2026X_DEV(ATA_UDMA5, 256), |
| }; |
| |
| /** |
| * pdc202xx_init_one - called when a PDC202xx is found |
| * @dev: the pdc202xx device |
| * @id: the matching pci id |
| * |
| * Called when the PCI registration layer (or the IDE initialization) |
| * finds a device matching our IDE device tables. |
| */ |
| |
| static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| const struct ide_port_info *d; |
| u8 idx = id->driver_data; |
| |
| d = &pdc202xx_chipsets[idx]; |
| |
| if (idx < 2) |
| pdc202ata4_fixup_irq(dev, d->name); |
| |
| if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) { |
| struct pci_dev *bridge = dev->bus->self; |
| |
| if (bridge && |
| bridge->vendor == PCI_VENDOR_ID_INTEL && |
| (bridge->device == PCI_DEVICE_ID_INTEL_I960 || |
| bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { |
| printk(KERN_INFO DRV_NAME " %s: skipping Promise " |
| "PDC20265 attached to I2O RAID controller\n", |
| pci_name(dev)); |
| return -ENODEV; |
| } |
| } |
| |
| return ide_pci_init_one(dev, d, NULL); |
| } |
| |
| static const struct pci_device_id pdc202xx_pci_tbl[] = { |
| { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 }, |
| { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 }, |
| { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 }, |
| { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 }, |
| { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl); |
| |
| static struct pci_driver pdc202xx_pci_driver = { |
| .name = "Promise_Old_IDE", |
| .id_table = pdc202xx_pci_tbl, |
| .probe = pdc202xx_init_one, |
| .remove = ide_pci_remove, |
| .suspend = ide_pci_suspend, |
| .resume = ide_pci_resume, |
| }; |
| |
| static int __init pdc202xx_ide_init(void) |
| { |
| return ide_pci_register_driver(&pdc202xx_pci_driver); |
| } |
| |
| static void __exit pdc202xx_ide_exit(void) |
| { |
| pci_unregister_driver(&pdc202xx_pci_driver); |
| } |
| |
| module_init(pdc202xx_ide_init); |
| module_exit(pdc202xx_ide_exit); |
| |
| MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz"); |
| MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); |
| MODULE_LICENSE("GPL"); |