libertas: Extend MESH_CONFIG command to access non-volatile configuration
This patch is based on a patch from Shailendra Govardhan and Brian Cavagnolo.
It extends the MESH_CONFIG command to configure non-volatile parameters on
libertas devices that support them (e.g. OLPC Active Antenna).
This patch only implements the driver/firmware interface.
See http://dev.laptop.org/ticket/6823 for minimal testing results and known
issues.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index b494aba..7ccec98 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -4,6 +4,7 @@
*/
#include <net/iw_handler.h>
+#include <net/ieee80211.h>
#include <linux/kfifo.h>
#include "host.h"
#include "hostcmd.h"
@@ -998,24 +999,69 @@
return ret;
}
-int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
+int lbs_mesh_config_send(struct lbs_private *priv,
+ struct cmd_ds_mesh_config *cmd,
+ uint16_t action, uint16_t type)
+{
+ int ret;
+
+ lbs_deb_enter(LBS_DEB_CMD);
+
+ cmd->hdr.command = cpu_to_le16(CMD_MESH_CONFIG);
+ cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
+ cmd->hdr.result = 0;
+
+ cmd->type = cpu_to_le16(type);
+ cmd->action = cpu_to_le16(action);
+
+ ret = lbs_cmd_with_response(priv, CMD_MESH_CONFIG, cmd);
+
+ lbs_deb_leave(LBS_DEB_CMD);
+ return ret;
+}
+
+/* This function is the CMD_MESH_CONFIG legacy function. It only handles the
+ * START and STOP actions. The extended actions supported by CMD_MESH_CONFIG
+ * are all handled by preparing a struct cmd_ds_mesh_config and passing it to
+ * lbs_mesh_config_send.
+ */
+int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan)
{
struct cmd_ds_mesh_config cmd;
+ struct mrvl_meshie *ie;
memset(&cmd, 0, sizeof(cmd));
- cmd.action = cpu_to_le16(enable);
cmd.channel = cpu_to_le16(chan);
- cmd.type = cpu_to_le16(priv->mesh_tlv);
- cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ ie = (struct mrvl_meshie *)cmd.data;
- if (enable) {
- cmd.length = cpu_to_le16(priv->mesh_ssid_len);
- memcpy(cmd.data, priv->mesh_ssid, priv->mesh_ssid_len);
+ switch (action) {
+ case CMD_ACT_MESH_CONFIG_START:
+ ie->hdr.id = MFIE_TYPE_GENERIC;
+ ie->val.oui[0] = 0x00;
+ ie->val.oui[1] = 0x50;
+ ie->val.oui[2] = 0x43;
+ ie->val.type = MARVELL_MESH_IE_TYPE;
+ ie->val.subtype = MARVELL_MESH_IE_SUBTYPE;
+ ie->val.version = MARVELL_MESH_IE_VERSION;
+ ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
+ ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
+ ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
+ ie->val.mesh_id_len = priv->mesh_ssid_len;
+ memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
+ ie->hdr.len = sizeof(struct mrvl_meshie_val) -
+ IW_ESSID_MAX_SIZE + priv->mesh_ssid_len;
+ cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
+ break;
+ case CMD_ACT_MESH_CONFIG_STOP:
+ break;
+ default:
+ return -1;
}
- lbs_deb_cmd("mesh config enable %d TLV %x channel %d SSID %s\n",
- enable, priv->mesh_tlv, chan,
+ lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
+ action, priv->mesh_tlv, chan,
escape_essid(priv->mesh_ssid, priv->mesh_ssid_len));
- return lbs_cmd_with_response(priv, CMD_MESH_CONFIG, &cmd);
+
+ return lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
}
static int lbs_cmd_bcn_ctrl(struct lbs_private * priv,