Merge tag 'leds_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this merge window we'd like to announce a change on the list of LED
subsystem maintainers - Bryan Wu decided to step back and handed over
the maintainership to me (Jacek Anaszewski), which entailed an update
of LED subsystem git tree URL.
Besides the changes in MAINTAINERS we have:
- optimizations and improvements to existing LED class drivers
- improvements to the common LEDs DT documentation
- modifications of kirkwood-* dts files, to be in sync with patches
for leds-ns2 driver, that move LEDs mode mapping outside of the
driver"
* tag 'leds_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: Export OF module alias information in missing drivers
leds:lp55xx: use the private data instead of updating I2C device platform data
leds: syscon: Correct check for syscon_node_to_regmap() errors
leds: leds-fsg: Use devm_led_classdev_register
MAINTAINERS: Change LED subsystem git tree URL
leds/led-class: Add missing put_device()
ARM: Kirkwood: add modes-map property to ns2-leds nodes
leds: tlc591xx: Remove redundant I2C_FUNC_SMBUS_BYTE_DATA functionality check
leds: leds-ns2: depends on MACH_ARMADA_370
leds: leds-ns2: handle can_sleep GPIOs
leds: leds-ns2: move LED modes mapping outside of the driver
leds: lp8860: Constify reg_default tables
leds: Drop owner assignment from i2c_driver
leds: Allow compile test of LEDS_AAT1290 and LEDS_KTD2692 if !GPIOLIB
leds: Allow compile test of GPIO consumers if !GPIOLIB
DT: leds: Improve description of flash LEDs related properties
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 747c538..6841984 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -29,14 +29,23 @@
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
-- max-microamp : maximum intensity in microamperes of the LED
- (torch LED for flash devices)
-- flash-max-microamp : maximum intensity in microamperes of the
- flash LED; it is mandatory if the LED should
- support the flash mode
-- flash-timeout-us : timeout in microseconds after which the flash
- LED is turned off
+- led-max-microamp : Maximum LED supply current in microamperes. This property
+ can be made mandatory for the board configurations
+ introducing a risk of hardware damage in case an excessive
+ current is set.
+ For flash LED controllers with configurable current this
+ property is mandatory for the LEDs in the non-flash modes
+ (e.g. torch or indicator).
+Required properties for flash LED child nodes:
+- flash-max-microamp : Maximum flash LED supply current in microamperes.
+- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
+ LED is turned off.
+
+For controllers that have no configurable current the flash-max-microamp
+property can be omitted.
+For controllers that have no configurable timeout the flash-max-timeout-us
+property can be omitted.
Examples:
@@ -49,7 +58,7 @@
camera-flash {
label = "Flash";
led-sources = <0>, <1>;
- max-microamp = <50000>;
+ led-max-microamp = <50000>;
flash-max-microamp = <320000>;
- flash-timeout-us = <500000>;
+ flash-max-timeout-us = <500000>;
};
diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
index aef3aca..9f81258 100644
--- a/Documentation/devicetree/bindings/leds/leds-ns2.txt
+++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -8,6 +8,9 @@
Required sub-node properties:
- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
+ the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
+ should be given in order to avoid having an unknown mode at driver probe time.
Optional sub-node properties:
- label: Name for this LED. If omitted, the label is taken from the node name.
@@ -15,6 +18,8 @@
Example:
+#include <dt-bindings/leds/leds-ns2.h>
+
ns2-leds {
compatible = "lacie,ns2-leds";
@@ -22,5 +27,9 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 0 1
+ NS_V2_LED_ON 1 0
+ NS_V2_LED_ON 0 0
+ NS_V2_LED_SATA 1 1>;
};
};
diff --git a/MAINTAINERS b/MAINTAINERS
index b41244b..cdcd9c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6042,11 +6042,10 @@
F: drivers/scsi/53c700*
LED SUBSYSTEM
-M: Bryan Wu <cooloney@gmail.com>
M: Richard Purdie <rpurdie@rpsys.net>
M: Jacek Anaszewski <j.anaszewski@samsung.com>
L: linux-leds@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
S: Maintained
F: drivers/leds/
F: include/linux/leds.h
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b78560..e1c25c3 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-netxbig.dtsi"
/ {
@@ -28,6 +29,10 @@
label = "d2net_v2:blue:sata";
slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bb..4121674 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -27,6 +28,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d1..190189d 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -27,6 +28,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0..55cc41d 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -46,6 +47,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf6..9935f3e 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -47,6 +48,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9ad35f7..23408bd 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -43,7 +43,7 @@
tristate "LED support for the AAT1290"
depends on LEDS_CLASS_FLASH
depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
depends on OF
depends on PINCTRL
help
@@ -419,7 +419,7 @@
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
depends on LEDS_CLASS
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
This option enables support for LEDs driven by a Linear Technology
LT3593 controller. This controller uses a special one-wire pulse
@@ -455,12 +455,16 @@
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
- depends on MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD || MACH_ARMADA_370
default y
help
- This option enable support for the dual-GPIO LED found on the
- Network Space v2 board (and parents). This include Internet Space v2,
- Network Space (Max) v2 and d2 Network v2 boards.
+ This option enables support for the dual-GPIO LEDs found on the
+ following LaCie/Seagate boards:
+
+ Network Space v2 (and parents: Max, Mini)
+ Internet Space v2
+ d2 Network v2
+ n090401 (Seagate NAS 4-Bay)
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
@@ -543,7 +547,8 @@
config LEDS_KTD2692
tristate "LED support for KTD2692 flash LED controller"
- depends on LEDS_CLASS_FLASH && GPIOLIB && OF
+ depends on LEDS_CLASS_FLASH && OF
+ depends on GPIOLIB || COMPILE_TEST
help
This option enables support for KTD2692 LED flash connected
through ExpressWire interface.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index beabfbc..ca51d58 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -228,12 +228,15 @@
{
unsigned int i = 0;
int ret = 0;
+ struct device *dev;
strlcpy(name, init_name, len);
- while (class_find_device(leds_class, NULL, name, match_name) &&
- (ret < len))
+ while ((ret < len) &&
+ (dev = class_find_device(leds_class, NULL, name, match_name))) {
+ put_device(dev);
ret = snprintf(name, len, "%s_%u", init_name, ++i);
+ }
if (ret >= len)
return -ENOMEM;
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index 2b4dc73..257a813 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -156,63 +156,35 @@
latch_value = 0xffff;
*latch_address = latch_value;
- ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
+ ret = devm_led_classdev_register(&pdev->dev, &fsg_wlan_led);
if (ret < 0)
- goto failwlan;
+ return ret;
- ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
+ ret = devm_led_classdev_register(&pdev->dev, &fsg_wan_led);
if (ret < 0)
- goto failwan;
+ return ret;
- ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
+ ret = devm_led_classdev_register(&pdev->dev, &fsg_sata_led);
if (ret < 0)
- goto failsata;
+ return ret;
- ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
+ ret = devm_led_classdev_register(&pdev->dev, &fsg_usb_led);
if (ret < 0)
- goto failusb;
+ return ret;
- ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
+ ret = devm_led_classdev_register(&pdev->dev, &fsg_sync_led);
if (ret < 0)
- goto failsync;
+ return ret;
- ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
+ ret = devm_led_classdev_register(&pdev->dev, &fsg_ring_led);
if (ret < 0)
- goto failring;
-
- return ret;
-
- failring:
- led_classdev_unregister(&fsg_sync_led);
- failsync:
- led_classdev_unregister(&fsg_usb_led);
- failusb:
- led_classdev_unregister(&fsg_sata_led);
- failsata:
- led_classdev_unregister(&fsg_wan_led);
- failwan:
- led_classdev_unregister(&fsg_wlan_led);
- failwlan:
+ return ret;
return ret;
}
-static int fsg_led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&fsg_wlan_led);
- led_classdev_unregister(&fsg_wan_led);
- led_classdev_unregister(&fsg_sata_led);
- led_classdev_unregister(&fsg_usb_led);
- led_classdev_unregister(&fsg_sync_led);
- led_classdev_unregister(&fsg_ring_led);
-
- return 0;
-}
-
-
static struct platform_driver fsg_led_driver = {
.probe = fsg_led_probe,
- .remove = fsg_led_remove,
.driver = {
.name = "fsg-led",
},
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 91325de..b38430c 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -492,7 +492,6 @@
.id_table = lm3530_id,
.driver = {
.name = LM3530_NAME,
- .owner = THIS_MODULE,
},
};
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index f5112cb..48872997 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -555,7 +555,6 @@
static struct i2c_driver lm355x_i2c_driver = {
.driver = {
.name = LM355x_NAME,
- .owner = THIS_MODULE,
.pm = NULL,
},
.probe = lm355x_probe,
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index d3dec01..02ebe34 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -446,7 +446,6 @@
static struct i2c_driver lm3642_i2c_driver = {
.driver = {
.name = LM3642_NAME,
- .owner = THIS_MODULE,
.pm = NULL,
},
.probe = lm3642_probe,
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 8ca197a..63a9254 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -514,20 +514,19 @@
int ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
- struct lp55xx_platform_data *pdata;
+ struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *np = client->dev.of_node;
- if (!dev_get_platdata(&client->dev)) {
+ if (!pdata) {
if (np) {
- ret = lp55xx_of_populate_pdata(&client->dev, np);
- if (ret < 0)
- return ret;
+ pdata = lp55xx_of_populate_pdata(&client->dev, np);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
} else {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
}
- pdata = dev_get_platdata(&client->dev);
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 584dbbc..1d0187f 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -880,20 +880,19 @@
int ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
- struct lp55xx_platform_data *pdata;
+ struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *np = client->dev.of_node;
- if (!dev_get_platdata(&client->dev)) {
+ if (!pdata) {
if (np) {
- ret = lp55xx_of_populate_pdata(&client->dev, np);
- if (ret < 0)
- return ret;
+ pdata = lp55xx_of_populate_pdata(&client->dev, np);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
} else {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
}
- pdata = dev_get_platdata(&client->dev);
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
index ca85724..0360c59 100644
--- a/drivers/leds/leds-lp5562.c
+++ b/drivers/leds/leds-lp5562.c
@@ -515,20 +515,19 @@
int ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
- struct lp55xx_platform_data *pdata;
+ struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *np = client->dev.of_node;
- if (!dev_get_platdata(&client->dev)) {
+ if (!pdata) {
if (np) {
- ret = lp55xx_of_populate_pdata(&client->dev, np);
- if (ret < 0)
- return ret;
+ pdata = lp55xx_of_populate_pdata(&client->dev, np);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
} else {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
}
- pdata = dev_get_platdata(&client->dev);
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 96d51e9..59b7683 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -543,7 +543,8 @@
}
EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs);
-int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
+struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
+ struct device_node *np)
{
struct device_node *child;
struct lp55xx_platform_data *pdata;
@@ -553,17 +554,17 @@
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
num_channels = of_get_child_count(np);
if (num_channels == 0) {
dev_err(dev, "no LED channels\n");
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
cfg = devm_kzalloc(dev, sizeof(*cfg) * num_channels, GFP_KERNEL);
if (!cfg)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
pdata->led_config = &cfg[0];
pdata->num_channels = num_channels;
@@ -588,9 +589,7 @@
/* LP8501 specific */
of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
- dev->platform_data = pdata;
-
- return 0;
+ return pdata;
}
EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata);
diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h
index cceab48..c7f1e61 100644
--- a/drivers/leds/leds-lp55xx-common.h
+++ b/drivers/leds/leds-lp55xx-common.h
@@ -202,7 +202,7 @@
extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip);
/* common device tree population function */
-extern int lp55xx_of_populate_pdata(struct device *dev,
- struct device_node *np);
+extern struct lp55xx_platform_data
+*lp55xx_of_populate_pdata(struct device *dev, struct device_node *np);
#endif /* _LEDS_LP55XX_COMMON_H */
diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c
index d3098e3..3f54f6f 100644
--- a/drivers/leds/leds-lp8501.c
+++ b/drivers/leds/leds-lp8501.c
@@ -308,20 +308,19 @@
int ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
- struct lp55xx_platform_data *pdata;
+ struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *np = client->dev.of_node;
- if (!dev_get_platdata(&client->dev)) {
+ if (!pdata) {
if (np) {
- ret = lp55xx_of_populate_pdata(&client->dev, np);
- if (ret < 0)
- return ret;
+ pdata = lp55xx_of_populate_pdata(&client->dev, np);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
} else {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
}
- pdata = dev_get_platdata(&client->dev);
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
index 8c2b7fb..79f0843 100644
--- a/drivers/leds/leds-lp8860.c
+++ b/drivers/leds/leds-lp8860.c
@@ -302,7 +302,7 @@
return ret;
}
-static struct reg_default lp8860_reg_defs[] = {
+static const struct reg_default lp8860_reg_defs[] = {
{ LP8860_DISP_CL1_BRT_MSB, 0x00},
{ LP8860_DISP_CL1_BRT_LSB, 0x00},
{ LP8860_DISP_CL1_CURR_MSB, 0x00},
@@ -332,7 +332,7 @@
.cache_type = REGCACHE_NONE,
};
-static struct reg_default lp8860_eeprom_defs[] = {
+static const struct reg_default lp8860_eeprom_defs[] = {
{ LP8860_EEPROM_REG_0, 0x00 },
{ LP8860_EEPROM_REG_1, 0x00 },
{ LP8860_EEPROM_REG_2, 0x00 },
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 1fd6adb..b33514d 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -31,50 +31,38 @@
#include <linux/platform_data/leds-kirkwood-ns2.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include "leds.h"
/*
- * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
- * relation with the SATA activity. This capability is exposed through the
- * "sata" sysfs attribute.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * cmd_led | slow_led | /SATA active | LED state
- * | | |
- * 1 | 0 | x | off
- * - | 1 | x | on
- * 0 | 0 | 1 | on
- * 0 | 0 | 0 | blink (rate 300ms)
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD. Three different LED
+ * modes are available: off, on and SATA activity blinking. The LED modes are
+ * controlled through two GPIOs (command and slow): each combination of values
+ * for the command/slow GPIOs corresponds to a LED mode.
*/
-enum ns2_led_modes {
- NS_V2_LED_OFF,
- NS_V2_LED_ON,
- NS_V2_LED_SATA,
-};
-
-struct ns2_led_mode_value {
- enum ns2_led_modes mode;
- int cmd_level;
- int slow_level;
-};
-
-static struct ns2_led_mode_value ns2_led_modval[] = {
- { NS_V2_LED_OFF , 1, 0 },
- { NS_V2_LED_ON , 0, 1 },
- { NS_V2_LED_ON , 1, 1 },
- { NS_V2_LED_SATA, 0, 0 },
-};
-
struct ns2_led_data {
struct led_classdev cdev;
unsigned cmd;
unsigned slow;
+ bool can_sleep;
+ int mode_index;
unsigned char sata; /* True when SATA mode active. */
rwlock_t rw_lock; /* Lock GPIOs. */
+ struct work_struct work;
+ int num_modes;
+ struct ns2_led_modval *modval;
};
+static void ns2_led_work(struct work_struct *work)
+{
+ struct ns2_led_data *led_dat =
+ container_of(work, struct ns2_led_data, work);
+ int i = led_dat->mode_index;
+
+ gpio_set_value_cansleep(led_dat->cmd, led_dat->modval[i].cmd_level);
+ gpio_set_value_cansleep(led_dat->slow, led_dat->modval[i].slow_level);
+}
+
static int ns2_led_get_mode(struct ns2_led_data *led_dat,
enum ns2_led_modes *mode)
{
@@ -83,22 +71,18 @@
int cmd_level;
int slow_level;
- read_lock_irq(&led_dat->rw_lock);
+ cmd_level = gpio_get_value_cansleep(led_dat->cmd);
+ slow_level = gpio_get_value_cansleep(led_dat->slow);
- cmd_level = gpio_get_value(led_dat->cmd);
- slow_level = gpio_get_value(led_dat->slow);
-
- for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
- if (cmd_level == ns2_led_modval[i].cmd_level &&
- slow_level == ns2_led_modval[i].slow_level) {
- *mode = ns2_led_modval[i].mode;
+ for (i = 0; i < led_dat->num_modes; i++) {
+ if (cmd_level == led_dat->modval[i].cmd_level &&
+ slow_level == led_dat->modval[i].slow_level) {
+ *mode = led_dat->modval[i].mode;
ret = 0;
break;
}
}
- read_unlock_irq(&led_dat->rw_lock);
-
return ret;
}
@@ -106,19 +90,32 @@
enum ns2_led_modes mode)
{
int i;
+ bool found = false;
unsigned long flags;
+ for (i = 0; i < led_dat->num_modes; i++)
+ if (mode == led_dat->modval[i].mode) {
+ found = true;
+ break;
+ }
+
+ if (!found)
+ return;
+
write_lock_irqsave(&led_dat->rw_lock, flags);
- for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
- if (mode == ns2_led_modval[i].mode) {
- gpio_set_value(led_dat->cmd,
- ns2_led_modval[i].cmd_level);
- gpio_set_value(led_dat->slow,
- ns2_led_modval[i].slow_level);
- }
+ if (!led_dat->can_sleep) {
+ gpio_set_value(led_dat->cmd,
+ led_dat->modval[i].cmd_level);
+ gpio_set_value(led_dat->slow,
+ led_dat->modval[i].slow_level);
+ goto exit_unlock;
}
+ led_dat->mode_index = i;
+ schedule_work(&led_dat->work);
+
+exit_unlock:
write_unlock_irqrestore(&led_dat->rw_lock, flags);
}
@@ -148,7 +145,6 @@
container_of(led_cdev, struct ns2_led_data, cdev);
int ret;
unsigned long enable;
- enum ns2_led_modes mode;
ret = kstrtoul(buff, 10, &enable);
if (ret < 0)
@@ -157,19 +153,19 @@
enable = !!enable;
if (led_dat->sata == enable)
- return count;
-
- ret = ns2_led_get_mode(led_dat, &mode);
- if (ret < 0)
- return ret;
-
- if (enable && mode == NS_V2_LED_ON)
- ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
- if (!enable && mode == NS_V2_LED_SATA)
- ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+ goto exit;
led_dat->sata = enable;
+ if (!led_get_brightness(led_cdev))
+ goto exit;
+
+ if (enable)
+ ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
+ else
+ ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+
+exit:
return count;
}
@@ -199,7 +195,7 @@
enum ns2_led_modes mode;
ret = devm_gpio_request_one(&pdev->dev, template->cmd,
- gpio_get_value(template->cmd) ?
+ gpio_get_value_cansleep(template->cmd) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret) {
@@ -209,7 +205,7 @@
}
ret = devm_gpio_request_one(&pdev->dev, template->slow,
- gpio_get_value(template->slow) ?
+ gpio_get_value_cansleep(template->slow) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret) {
@@ -228,6 +224,10 @@
led_dat->cdev.groups = ns2_led_groups;
led_dat->cmd = template->cmd;
led_dat->slow = template->slow;
+ led_dat->can_sleep = gpio_cansleep(led_dat->cmd) |
+ gpio_cansleep(led_dat->slow);
+ led_dat->modval = template->modval;
+ led_dat->num_modes = template->num_modes;
ret = ns2_led_get_mode(led_dat, &mode);
if (ret < 0)
@@ -238,6 +238,8 @@
led_dat->cdev.brightness =
(mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
+ INIT_WORK(&led_dat->work, ns2_led_work);
+
ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
if (ret < 0)
return ret;
@@ -248,6 +250,7 @@
static void delete_ns2_led(struct ns2_led_data *led_dat)
{
led_classdev_unregister(&led_dat->cdev);
+ cancel_work_sync(&led_dat->work);
}
#ifdef CONFIG_OF_GPIO
@@ -259,9 +262,8 @@
{
struct device_node *np = dev->of_node;
struct device_node *child;
- struct ns2_led *leds;
+ struct ns2_led *led, *leds;
int num_leds = 0;
- int i = 0;
num_leds = of_get_child_count(np);
if (!num_leds)
@@ -272,26 +274,57 @@
if (!leds)
return -ENOMEM;
+ led = leds;
for_each_child_of_node(np, child) {
const char *string;
- int ret;
+ int ret, i, num_modes;
+ struct ns2_led_modval *modval;
ret = of_get_named_gpio(child, "cmd-gpio", 0);
if (ret < 0)
return ret;
- leds[i].cmd = ret;
+ led->cmd = ret;
ret = of_get_named_gpio(child, "slow-gpio", 0);
if (ret < 0)
return ret;
- leds[i].slow = ret;
+ led->slow = ret;
ret = of_property_read_string(child, "label", &string);
- leds[i].name = (ret == 0) ? string : child->name;
+ led->name = (ret == 0) ? string : child->name;
ret = of_property_read_string(child, "linux,default-trigger",
&string);
if (ret == 0)
- leds[i].default_trigger = string;
+ led->default_trigger = string;
- i++;
+ ret = of_property_count_u32_elems(child, "modes-map");
+ if (ret < 0 || ret % 3) {
+ dev_err(dev,
+ "Missing or malformed modes-map property\n");
+ return -EINVAL;
+ }
+
+ num_modes = ret / 3;
+ modval = devm_kzalloc(dev,
+ num_modes * sizeof(struct ns2_led_modval),
+ GFP_KERNEL);
+ if (!modval)
+ return -ENOMEM;
+
+ for (i = 0; i < num_modes; i++) {
+ of_property_read_u32_index(child,
+ "modes-map", 3 * i,
+ (u32 *) &modval[i].mode);
+ of_property_read_u32_index(child,
+ "modes-map", 3 * i + 1,
+ (u32 *) &modval[i].cmd_level);
+ of_property_read_u32_index(child,
+ "modes-map", 3 * i + 2,
+ (u32 *) &modval[i].slow_level);
+ }
+
+ led->num_modes = num_modes;
+ led->modval = modval;
+
+ led++;
}
pdata->leds = leds;
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index c3a08b6..b775e1e 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -379,7 +379,6 @@
static struct i2c_driver pca955x_driver = {
.driver = {
.name = "leds-pca955x",
- .owner = THIS_MODULE,
},
.probe = pca955x_probe,
.remove = pca955x_remove,
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index bee3e1a..41f269f 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -332,6 +332,7 @@
{ .compatible = "nxp,pca9635", },
{},
};
+MODULE_DEVICE_TABLE(of, of_pca963x_match);
#else
static struct pca963x_platform_data *
pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
@@ -458,7 +459,6 @@
static struct i2c_driver pca963x_driver = {
.driver = {
.name = "leds-pca963x",
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(of_pca963x_match),
},
.probe = pca963x_probe,
diff --git a/drivers/leds/leds-syscon.c b/drivers/leds/leds-syscon.c
index d1660b0..b88900d 100644
--- a/drivers/leds/leds-syscon.c
+++ b/drivers/leds/leds-syscon.c
@@ -83,9 +83,9 @@
return -ENODEV;
}
map = syscon_node_to_regmap(parent->of_node);
- if (!map) {
+ if (IS_ERR(map)) {
dev_err(dev, "no regmap for syscon LED parent\n");
- return -ENODEV;
+ return PTR_ERR(map);
}
sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index 20fa8e7..edbecc4 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -735,6 +735,7 @@
{ .compatible = "ti,tca6507", },
{},
};
+MODULE_DEVICE_TABLE(of, of_tca6507_leds_match);
#else
static struct tca6507_platform_data *
@@ -830,7 +831,6 @@
static struct i2c_driver tca6507_driver = {
.driver = {
.name = "leds-tca6507",
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(of_tca6507_leds_match),
},
.probe = tca6507_probe,
diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
index de16c29..b806eca 100644
--- a/drivers/leds/leds-tlc591xx.c
+++ b/drivers/leds/leds-tlc591xx.c
@@ -231,10 +231,6 @@
if (!count || count > tlc591xx->max_leds)
return -EINVAL;
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA))
- return -EIO;
-
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 49794b4..5bda6a9 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -72,7 +72,7 @@
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
This allows LEDs to be controlled by gpio events. It's good
when using gpios as switches and triggering the needed LEDs
diff --git a/include/dt-bindings/leds/leds-ns2.h b/include/dt-bindings/leds/leds-ns2.h
new file mode 100644
index 0000000..491c5f9
--- /dev/null
+++ b/include/dt-bindings/leds/leds-ns2.h
@@ -0,0 +1,8 @@
+#ifndef _DT_BINDINGS_LEDS_NS2_H
+#define _DT_BINDINGS_LEDS_NS2_H
+
+#define NS_V2_LED_OFF 0
+#define NS_V2_LED_ON 1
+#define NS_V2_LED_SATA 2
+
+#endif
diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h
index 6a9fed5..eb8a686 100644
--- a/include/linux/platform_data/leds-kirkwood-ns2.h
+++ b/include/linux/platform_data/leds-kirkwood-ns2.h
@@ -9,11 +9,25 @@
#ifndef __LEDS_KIRKWOOD_NS2_H
#define __LEDS_KIRKWOOD_NS2_H
+enum ns2_led_modes {
+ NS_V2_LED_OFF,
+ NS_V2_LED_ON,
+ NS_V2_LED_SATA,
+};
+
+struct ns2_led_modval {
+ enum ns2_led_modes mode;
+ int cmd_level;
+ int slow_level;
+};
+
struct ns2_led {
const char *name;
const char *default_trigger;
unsigned cmd;
unsigned slow;
+ int num_modes;
+ struct ns2_led_modval *modval;
};
struct ns2_led_platform_data {