Merge branch 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6
* 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6: (37 commits)
[CELL] spufs: rework list management and associated locking
[CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
[CELL] oprofile: enable SPU switch notification to detect currently active SPU tasks
[CELL] spu_base: locking cleanup
[CELL] cell: indexing of SPUs based on firmware vicinity properties
[CELL] spufs: integration of SPE affinity with the scheduller
[CELL] cell: add placement computation for scheduling of affinity contexts
[CELL] spufs: extension of spu_create to support affinity definition
[CELL] cell: add hardcoded spu vicinity information for QS20
[CELL] cell: add vicinity information on spus
[CELL] cell: add per BE structure with info about its SPUs
[CELL] spufs: use find_first_bit() instead of sched_find_first_bit()
[CELL] spufs: remove unused file argument from spufs_run_spu()
[CELL] spufs: change decrementer restore timing
[CELL] spufs: dont halt decrementer at restore step 47
[CELL] spufs: limit saving MFC_CNTL bits
[CELL] spufs: fix read and write for decr_status file
[CELL] spufs: fix decr_status meanings
[CELL] spufs: remove needless context save/restore code
[CELL] spufs: fix array size of channel index
...
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9a54148..5fbe077 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1154,6 +1154,8 @@
nointroute [IA-64]
+ nojitter [IA64] Disables jitter checking for ITC timers.
+
nolapic [IA-32,APIC] Do not enable or use the local APIC.
nolapic_timer [IA-32,APIC] Do not use the local APIC timer.
@@ -1885,6 +1887,9 @@
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
+ vector= [IA-64,SMP]
+ vector=percpu: enable percpu vector domain
+
video= [FB] Frame buffer configuration
See Documentation/fb/modedb.txt.
diff --git a/Documentation/time_interpolators.txt b/Documentation/time_interpolators.txt
deleted file mode 100644
index e3b6085..0000000
--- a/Documentation/time_interpolators.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Time Interpolators
-------------------
-
-Time interpolators are a base of time calculation between timer ticks and
-allow an accurate determination of time down to the accuracy of the time
-source in nanoseconds.
-
-The architecture specific code typically provides gettimeofday and
-settimeofday under Linux. The time interpolator provides both if an arch
-defines CONFIG_TIME_INTERPOLATION. The arch still must set up timer tick
-operations and call the necessary functions to advance the clock.
-
-With the time interpolator a standardized interface exists for time
-interpolation between ticks. The provided logic is highly scalable
-and has been tested in SMP situations of up to 512 CPUs.
-
-If CONFIG_TIME_INTERPOLATION is defined then the architecture specific code
-(or the device drivers - like HPET) may register time interpolators.
-These are typically defined in the following way:
-
-static struct time_interpolator my_interpolator {
- .frequency = MY_FREQUENCY,
- .source = TIME_SOURCE_MMIO32,
- .shift = 8, /* scaling for higher accuracy */
- .drift = -1, /* Unknown drift */
- .jitter = 0 /* time source is stable */
-};
-
-void time_init(void)
-{
- ....
- /* Initialization of the timer *.
- my_interpolator.address = &my_timer;
- register_time_interpolator(&my_interpolator);
- ....
-}
-
-For more details see include/linux/timex.h and kernel/timer.c.
-
-Christoph Lameter <christoph@lameter.com>, October 31, 2004
-
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 616c96e..36c7b96 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -62,7 +62,11 @@
bool
default y
-config TIME_INTERPOLATION
+config GENERIC_TIME
+ bool
+ default y
+
+config GENERIC_TIME_VSYSCALL
bool
default y
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 90e9c2e..9eb48c0 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -85,7 +85,7 @@
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index 0d29aa2..3a9ed95 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -86,7 +86,7 @@
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
index d9146c3..c420d9f 100644
--- a/arch/ia64/configs/sim_defconfig
+++ b/arch/ia64/configs/sim_defconfig
@@ -86,7 +86,7 @@
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 64e951d..4c9ffc4 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -93,7 +93,7 @@
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index a144693..3dbb398 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar 8 11:07:09 2007
+# Linux kernel version: 2.6.22
+# Thu Jul 19 13:54:47 2007
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -19,15 +19,15 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
@@ -46,18 +46,19 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -65,12 +66,9 @@
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -91,6 +89,7 @@
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -98,7 +97,7 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
@@ -114,8 +113,8 @@
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_IA64_PAGE_SIZE_16KB is not set
+CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
@@ -145,6 +144,9 @@
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -152,11 +154,11 @@
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
+# CONFIG_IA32_SUPPORT is not set
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_MC_ERR_INJECT is not set
# CONFIG_IA64_ESI is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
@@ -166,6 +168,7 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -175,7 +178,6 @@
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
@@ -205,13 +207,11 @@
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCI Hotplug Support
-#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
@@ -232,7 +232,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -270,20 +269,8 @@
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -309,7 +296,17 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -324,25 +321,9 @@
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
@@ -350,10 +331,7 @@
# Protocols
#
CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -370,16 +348,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
@@ -396,6 +369,7 @@
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
@@ -404,12 +378,12 @@
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
@@ -438,7 +412,6 @@
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
@@ -446,6 +419,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
@@ -468,6 +442,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -514,15 +489,7 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -539,6 +506,7 @@
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
@@ -553,46 +521,25 @@
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
@@ -623,10 +570,7 @@
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
@@ -639,36 +583,36 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -678,18 +622,9 @@
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -697,6 +632,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -722,9 +658,17 @@
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -790,19 +734,10 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=m
@@ -821,15 +756,8 @@
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -837,21 +765,17 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -863,17 +787,20 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -887,16 +814,18 @@
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -907,8 +836,10 @@
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
@@ -918,7 +849,6 @@
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -926,6 +856,7 @@
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
@@ -955,41 +886,10 @@
# CONFIG_USB_LIBUSUAL is not set
#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
@@ -1033,10 +933,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -1051,17 +947,9 @@
#
# LED Triggers
#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
@@ -1080,12 +968,9 @@
#
#
-# Auxiliary Display support
+# Userspace I/O
#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
# CONFIG_MSPEC is not set
#
@@ -1200,7 +1085,8 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
@@ -1214,7 +1100,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1236,6 +1121,7 @@
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
@@ -1292,11 +1178,14 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
@@ -1319,8 +1208,8 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -1343,17 +1232,12 @@
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
@@ -1373,6 +1257,7 @@
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -1390,7 +1275,4 @@
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 1c7955c..4a060fc 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -96,7 +96,7 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 90bd960..03172dc 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar 8 11:01:03 2007
+# Linux kernel version: 2.6.22
+# Thu Jul 19 13:55:32 2007
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -19,15 +19,15 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
@@ -46,18 +46,19 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -65,12 +66,9 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -91,6 +89,7 @@
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -98,7 +97,7 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_INTERPOLATION=y
+CONFIG_GENERIC_TIME=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
@@ -114,8 +113,8 @@
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_IA64_PAGE_SIZE_16KB is not set
+CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
@@ -147,6 +146,9 @@
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -164,7 +166,7 @@
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
-# CONFIG_MC_ERR_INJECT is not set
+# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
@@ -180,6 +182,7 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -189,7 +192,6 @@
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
@@ -220,13 +222,11 @@
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCI Hotplug Support
-#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
@@ -248,7 +248,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -286,20 +285,8 @@
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -325,7 +312,17 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -340,25 +337,9 @@
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
@@ -366,10 +347,7 @@
# Protocols
#
CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -386,16 +364,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
@@ -412,6 +385,7 @@
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
@@ -420,12 +394,12 @@
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
@@ -455,7 +429,6 @@
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
@@ -463,6 +436,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
@@ -485,6 +459,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -492,7 +467,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
#
@@ -531,15 +506,7 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -557,6 +524,8 @@
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
+# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
@@ -564,53 +533,32 @@
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
-# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
@@ -641,10 +589,7 @@
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
@@ -657,36 +602,36 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -696,18 +641,9 @@
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -715,6 +651,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -740,9 +677,17 @@
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -814,19 +759,10 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=m
@@ -848,15 +784,8 @@
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -864,21 +793,17 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -890,17 +815,20 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -1014,9 +942,10 @@
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
@@ -1025,16 +954,24 @@
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1045,8 +982,10 @@
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
@@ -1056,7 +995,6 @@
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1064,6 +1002,7 @@
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
@@ -1093,47 +1032,10 @@
# CONFIG_USB_LIBUSUAL is not set
#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
@@ -1177,10 +1079,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -1195,10 +1093,6 @@
#
# LED Triggers
#
-
-#
-# InfiniBand support
-#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
@@ -1206,6 +1100,7 @@
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
+# CONFIG_MLX4_INFINIBAND is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1214,10 +1109,6 @@
# CONFIG_INFINIBAND_ISER is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
@@ -1236,12 +1127,9 @@
#
#
-# Auxiliary Display support
+# Userspace I/O
#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
# CONFIG_MSPEC is not set
#
@@ -1357,7 +1245,8 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
@@ -1371,7 +1260,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1393,6 +1281,7 @@
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
@@ -1449,11 +1338,14 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
@@ -1483,8 +1375,8 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -1514,10 +1406,6 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
@@ -1537,6 +1425,7 @@
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -1554,7 +1443,4 @@
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 2236fab..0aebc6f 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -7,6 +7,7 @@
#define ASM_OFFSETS_C 1
#include <linux/sched.h>
+#include <linux/clocksource.h>
#include <asm-ia64/processor.h>
#include <asm-ia64/ptrace.h>
@@ -15,6 +16,7 @@
#include <asm-ia64/mca.h>
#include "../kernel/sigframe.h"
+#include "../kernel/fsyscall_gtod_data.h"
#define DEFINE(sym, val) \
asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -256,17 +258,24 @@
BLANK();
/* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */
- DEFINE(IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET, offsetof (struct time_interpolator, addr));
- DEFINE(IA64_TIME_INTERPOLATOR_SOURCE_OFFSET, offsetof (struct time_interpolator, source));
- DEFINE(IA64_TIME_INTERPOLATOR_SHIFT_OFFSET, offsetof (struct time_interpolator, shift));
- DEFINE(IA64_TIME_INTERPOLATOR_NSEC_OFFSET, offsetof (struct time_interpolator, nsec_per_cyc));
- DEFINE(IA64_TIME_INTERPOLATOR_OFFSET_OFFSET, offsetof (struct time_interpolator, offset));
- DEFINE(IA64_TIME_INTERPOLATOR_LAST_CYCLE_OFFSET, offsetof (struct time_interpolator, last_cycle));
- DEFINE(IA64_TIME_INTERPOLATOR_LAST_COUNTER_OFFSET, offsetof (struct time_interpolator, last_counter));
- DEFINE(IA64_TIME_INTERPOLATOR_JITTER_OFFSET, offsetof (struct time_interpolator, jitter));
- DEFINE(IA64_TIME_INTERPOLATOR_MASK_OFFSET, offsetof (struct time_interpolator, mask));
- DEFINE(IA64_TIME_SOURCE_CPU, TIME_SOURCE_CPU);
- DEFINE(IA64_TIME_SOURCE_MMIO64, TIME_SOURCE_MMIO64);
- DEFINE(IA64_TIME_SOURCE_MMIO32, TIME_SOURCE_MMIO32);
- DEFINE(IA64_TIMESPEC_TV_NSEC_OFFSET, offsetof (struct timespec, tv_nsec));
+ DEFINE(IA64_GTOD_LOCK_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, lock));
+ DEFINE(IA64_GTOD_WALL_TIME_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, wall_time));
+ DEFINE(IA64_GTOD_MONO_TIME_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, monotonic_time));
+ DEFINE(IA64_CLKSRC_MASK_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, clk_mask));
+ DEFINE(IA64_CLKSRC_MULT_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, clk_mult));
+ DEFINE(IA64_CLKSRC_SHIFT_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, clk_shift));
+ DEFINE(IA64_CLKSRC_MMIO_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, clk_fsys_mmio));
+ DEFINE(IA64_CLKSRC_CYCLE_LAST_OFFSET,
+ offsetof (struct fsyscall_gtod_data_t, clk_cycle_last));
+ DEFINE(IA64_ITC_JITTER_OFFSET,
+ offsetof (struct itc_jitter_data_t, itc_jitter));
+ DEFINE(IA64_ITC_LASTCYCLE_OFFSET,
+ offsetof (struct itc_jitter_data_t, itc_lastcycle));
}
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index e00b215..2fd96d90 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -3,6 +3,7 @@
#include <linux/time.h>
#include <linux/errno.h>
#include <linux/timex.h>
+#include <linux/clocksource.h>
#include <asm/io.h>
/* IBM Summit (EXA) Cyclone counter code*/
@@ -18,13 +19,21 @@
use_cyclone = 1;
}
+static void __iomem *cyclone_mc;
-struct time_interpolator cyclone_interpolator = {
- .source = TIME_SOURCE_MMIO64,
- .shift = 16,
- .frequency = CYCLONE_TIMER_FREQ,
- .drift = -100,
- .mask = (1LL << 40) - 1
+static cycle_t read_cyclone(void)
+{
+ return (cycle_t)readq((void __iomem *)cyclone_mc);
+}
+
+static struct clocksource clocksource_cyclone = {
+ .name = "cyclone",
+ .rating = 300,
+ .read = read_cyclone,
+ .mask = (1LL << 40) - 1,
+ .mult = 0, /*to be caluclated*/
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
int __init init_cyclone_clock(void)
@@ -44,13 +53,15 @@
offset = (CYCLONE_CBAR_ADDR);
reg = (u64*)ioremap_nocache(offset, sizeof(u64));
if(!reg){
- printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
+ printk(KERN_ERR "Summit chipset: Could not find valid CBAR"
+ " register.\n");
use_cyclone = 0;
return -ENODEV;
}
base = readq(reg);
if(!base){
- printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
+ printk(KERN_ERR "Summit chipset: Could not find valid CBAR"
+ " value.\n");
use_cyclone = 0;
return -ENODEV;
}
@@ -60,7 +71,8 @@
offset = (base + CYCLONE_PMCC_OFFSET);
reg = (u64*)ioremap_nocache(offset, sizeof(u64));
if(!reg){
- printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
+ printk(KERN_ERR "Summit chipset: Could not find valid PMCC"
+ " register.\n");
use_cyclone = 0;
return -ENODEV;
}
@@ -71,7 +83,8 @@
offset = (base + CYCLONE_MPCS_OFFSET);
reg = (u64*)ioremap_nocache(offset, sizeof(u64));
if(!reg){
- printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
+ printk(KERN_ERR "Summit chipset: Could not find valid MPCS"
+ " register.\n");
use_cyclone = 0;
return -ENODEV;
}
@@ -82,7 +95,8 @@
offset = (base + CYCLONE_MPMC_OFFSET);
cyclone_timer = (u32*)ioremap_nocache(offset, sizeof(u32));
if(!cyclone_timer){
- printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
+ printk(KERN_ERR "Summit chipset: Could not find valid MPMC"
+ " register.\n");
use_cyclone = 0;
return -ENODEV;
}
@@ -93,7 +107,8 @@
int stall = 100;
while(stall--) barrier();
if(readl(cyclone_timer) == old){
- printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
+ printk(KERN_ERR "Summit chipset: Counter not counting!"
+ " DISABLED\n");
iounmap(cyclone_timer);
cyclone_timer = 0;
use_cyclone = 0;
@@ -101,8 +116,11 @@
}
}
/* initialize last tick */
- cyclone_interpolator.addr = cyclone_timer;
- register_time_interpolator(&cyclone_interpolator);
+ cyclone_mc = cyclone_timer;
+ clocksource_cyclone.fsys_mmio = cyclone_timer;
+ clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
+ clocksource_cyclone.shift);
+ clocksource_register(&clocksource_cyclone);
return 0;
}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 95f5175..c36f43c 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1581,7 +1581,7 @@
data8 sys_sync_file_range // 1300
data8 sys_tee
data8 sys_vmsplice
- data8 sys_ni_syscall // reserved for move_pages
+ data8 sys_fallocate
data8 sys_getcpu
data8 sys_epoll_pwait // 1305
data8 sys_utimensat
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 3f926c2..4484197 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -147,12 +147,11 @@
FSYS_RETURN
END(fsys_set_tid_address)
-/*
- * Ensure that the time interpolator structure is compatible with the asm code
- */
-#if IA64_TIME_INTERPOLATOR_SOURCE_OFFSET !=0 || IA64_TIME_INTERPOLATOR_SHIFT_OFFSET != 2 \
- || IA64_TIME_INTERPOLATOR_JITTER_OFFSET != 3 || IA64_TIME_INTERPOLATOR_NSEC_OFFSET != 4
-#error fsys_gettimeofday incompatible with changes to struct time_interpolator
+#if IA64_GTOD_LOCK_OFFSET !=0
+#error fsys_gettimeofday incompatible with changes to struct fsyscall_gtod_data_t
+#endif
+#if IA64_ITC_JITTER_OFFSET !=0
+#error fsys_gettimeofday incompatible with changes to struct itc_jitter_data_t
#endif
#define CLOCK_REALTIME 0
#define CLOCK_MONOTONIC 1
@@ -179,126 +178,124 @@
// r11 = preserved: saved ar.pfs
// r12 = preserved: memory stack
// r13 = preserved: thread pointer
- // r14 = address of mask / mask
+ // r14 = address of mask / mask value
// r15 = preserved: system call number
// r16 = preserved: current task pointer
- // r17 = wall to monotonic use
- // r18 = time_interpolator->offset
- // r19 = address of wall_to_monotonic
- // r20 = pointer to struct time_interpolator / pointer to time_interpolator->address
- // r21 = shift factor
- // r22 = address of time interpolator->last_counter
- // r23 = address of time_interpolator->last_cycle
- // r24 = adress of time_interpolator->offset
- // r25 = last_cycle value
- // r26 = last_counter value
- // r27 = pointer to xtime
+ // r17 = (not used)
+ // r18 = (not used)
+ // r19 = address of itc_lastcycle
+ // r20 = struct fsyscall_gtod_data (= address of gtod_lock.sequence)
+ // r21 = address of mmio_ptr
+ // r22 = address of wall_time or monotonic_time
+ // r23 = address of shift / value
+ // r24 = address mult factor / cycle_last value
+ // r25 = itc_lastcycle value
+ // r26 = address clocksource cycle_last
+ // r27 = (not used)
// r28 = sequence number at the beginning of critcal section
- // r29 = address of seqlock
+ // r29 = address of itc_jitter
// r30 = time processing flags / memory address
// r31 = pointer to result
// Predicates
// p6,p7 short term use
// p8 = timesource ar.itc
// p9 = timesource mmio64
- // p10 = timesource mmio32
+ // p10 = timesource mmio32 - not used
// p11 = timesource not to be handled by asm code
- // p12 = memory time source ( = p9 | p10)
- // p13 = do cmpxchg with time_interpolator_last_cycle
+ // p12 = memory time source ( = p9 | p10) - not used
+ // p13 = do cmpxchg with itc_lastcycle
// p14 = Divide by 1000
// p15 = Add monotonic
//
- // Note that instructions are optimized for McKinley. McKinley can process two
- // bundles simultaneously and therefore we continuously try to feed the CPU
- // two bundles and then a stop.
- tnat.nz p6,p0 = r31 // branch deferred since it does not fit into bundle structure
+ // Note that instructions are optimized for McKinley. McKinley can
+ // process two bundles simultaneously and therefore we continuously
+ // try to feed the CPU two bundles and then a stop.
+ //
+ // Additional note that code has changed a lot. Optimization is TBD.
+ // Comments begin with "?" are maybe outdated.
+ tnat.nz p6,p0 = r31 // ? branch deferred to fit later bundle
mov pr = r30,0xc000 // Set predicates according to function
add r2 = TI_FLAGS+IA64_TASK_SIZE,r16
- movl r20 = time_interpolator
+ movl r20 = fsyscall_gtod_data // load fsyscall gettimeofday data address
;;
- ld8 r20 = [r20] // get pointer to time_interpolator structure
- movl r29 = xtime_lock
+ movl r29 = itc_jitter_data // itc_jitter
+ add r22 = IA64_GTOD_WALL_TIME_OFFSET,r20 // wall_time
ld4 r2 = [r2] // process work pending flags
- movl r27 = xtime
- ;; // only one bundle here
- ld8 r21 = [r20] // first quad with control information
- and r2 = TIF_ALLWORK_MASK,r2
-(p6) br.cond.spnt.few .fail_einval // deferred branch
;;
- add r10 = IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET,r20
- extr r3 = r21,32,32 // time_interpolator->nsec_per_cyc
- extr r8 = r21,0,16 // time_interpolator->source
+(p15) add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20 // monotonic_time
+ add r21 = IA64_CLKSRC_MMIO_OFFSET,r20
+ add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29
+ and r2 = TIF_ALLWORK_MASK,r2
+(p6) br.cond.spnt.few .fail_einval // ? deferred branch
+ ;;
+ add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last
cmp.ne p6, p0 = 0, r2 // Fallback if work is scheduled
(p6) br.cond.spnt.many fsys_fallback_syscall
;;
- cmp.eq p8,p12 = 0,r8 // Check for cpu timer
- cmp.eq p9,p0 = 1,r8 // MMIO64 ?
- extr r2 = r21,24,8 // time_interpolator->jitter
- cmp.eq p10,p0 = 2,r8 // MMIO32 ?
- cmp.ltu p11,p0 = 2,r8 // function or other clock
-(p11) br.cond.spnt.many fsys_fallback_syscall
- ;;
- setf.sig f7 = r3 // Setup for scaling of counter
-(p15) movl r19 = wall_to_monotonic
-(p12) ld8 r30 = [r10]
- cmp.ne p13,p0 = r2,r0 // need jitter compensation?
- extr r21 = r21,16,8 // shift factor
- ;;
+ // Begin critical section
.time_redo:
- .pred.rel.mutex p8,p9,p10
- ld4.acq r28 = [r29] // xtime_lock.sequence. Must come first for locking purposes
+ ld4.acq r28 = [r20] // gtod_lock.sequence, Must take first
;;
- and r28 = ~1,r28 // Make sequence even to force retry if odd
+ and r28 = ~1,r28 // And make sequence even to force retry if odd
;;
+ ld8 r30 = [r21] // clocksource->mmio_ptr
+ add r24 = IA64_CLKSRC_MULT_OFFSET,r20
+ ld4 r2 = [r29] // itc_jitter value
+ add r23 = IA64_CLKSRC_SHIFT_OFFSET,r20
+ add r14 = IA64_CLKSRC_MASK_OFFSET,r20
+ ;;
+ ld4 r3 = [r24] // clocksource mult value
+ ld8 r14 = [r14] // clocksource mask value
+ cmp.eq p8,p9 = 0,r30 // use cpu timer if no mmio_ptr
+ ;;
+ setf.sig f7 = r3 // Setup for mult scaling of counter
+(p8) cmp.ne p13,p0 = r2,r0 // need itc_jitter compensation, set p13
+ ld4 r23 = [r23] // clocksource shift value
+ ld8 r24 = [r26] // get clksrc_cycle_last value
+(p9) cmp.eq p13,p0 = 0,r30 // if mmio_ptr, clear p13 jitter control
+ ;;
+ .pred.rel.mutex p8,p9
(p8) mov r2 = ar.itc // CPU_TIMER. 36 clocks latency!!!
- add r22 = IA64_TIME_INTERPOLATOR_LAST_COUNTER_OFFSET,r20
-(p9) ld8 r2 = [r30] // readq(ti->address). Could also have latency issues..
-(p10) ld4 r2 = [r30] // readw(ti->address)
-(p13) add r23 = IA64_TIME_INTERPOLATOR_LAST_CYCLE_OFFSET,r20
- ;; // could be removed by moving the last add upward
- ld8 r26 = [r22] // time_interpolator->last_counter
-(p13) ld8 r25 = [r23] // time interpolator->last_cycle
- add r24 = IA64_TIME_INTERPOLATOR_OFFSET_OFFSET,r20
-(p15) ld8 r17 = [r19],IA64_TIMESPEC_TV_NSEC_OFFSET
- ld8 r9 = [r27],IA64_TIMESPEC_TV_NSEC_OFFSET
- add r14 = IA64_TIME_INTERPOLATOR_MASK_OFFSET, r20
+(p9) ld8 r2 = [r30] // MMIO_TIMER. Could also have latency issues..
+(p13) ld8 r25 = [r19] // get itc_lastcycle value
+ ;; // ? could be removed by moving the last add upward
+ ld8 r9 = [r22],IA64_TIMESPEC_TV_NSEC_OFFSET // tv_sec
;;
- ld8 r18 = [r24] // time_interpolator->offset
- ld8 r8 = [r27],-IA64_TIMESPEC_TV_NSEC_OFFSET // xtime.tv_nsec
-(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm)
+ ld8 r8 = [r22],-IA64_TIMESPEC_TV_NSEC_OFFSET // tv_nsec
+(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm)
;;
- ld8 r14 = [r14] // time_interpolator->mask
-(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared
- sub r10 = r2,r26 // current_counter - last_counter
+(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared
+ sub r10 = r2,r24 // current_cycle - last_cycle
;;
-(p6) sub r10 = r25,r26 // time we got was less than last_cycle
+(p6) sub r10 = r25,r24 // time we got was less than last_cycle
(p7) mov ar.ccv = r25 // more than last_cycle. Prep for cmpxchg
;;
+(p7) cmpxchg8.rel r3 = [r19],r2,ar.ccv
+ ;;
+(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful
+ ;;
+(p7) sub r10 = r3,r24 // then use new last_cycle instead
+ ;;
and r10 = r10,r14 // Apply mask
;;
setf.sig f8 = r10
nop.i 123
;;
-(p7) cmpxchg8.rel r3 = [r23],r2,ar.ccv
-EX(.fail_efault, probe.w.fault r31, 3) // This takes 5 cycles and we have spare time
+ // fault check takes 5 cycles and we have spare time
+EX(.fail_efault, probe.w.fault r31, 3)
xmpy.l f8 = f8,f7 // nsec_per_cyc*(counter-last_counter)
-(p15) add r9 = r9,r17 // Add wall to monotonic.secs to result secs
;;
-(p15) ld8 r17 = [r19],-IA64_TIMESPEC_TV_NSEC_OFFSET
-(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful redo
- // simulate tbit.nz.or p7,p0 = r28,0
+ // ? simulate tbit.nz.or p7,p0 = r28,0
getf.sig r2 = f8
mf
- add r8 = r8,r18 // Add time interpolator offset
;;
- ld4 r10 = [r29] // xtime_lock.sequence
-(p15) add r8 = r8, r17 // Add monotonic.nsecs to nsecs
- shr.u r2 = r2,r21
- ;; // overloaded 3 bundles!
- // End critical section.
+ ld4 r10 = [r20] // gtod_lock.sequence
+ shr.u r2 = r2,r23 // shift by factor
+ ;; // ? overloaded 3 bundles!
add r8 = r8,r2 // Add xtime.nsecs
- cmp4.ne.or p7,p0 = r28,r10
-(p7) br.cond.dpnt.few .time_redo // sequence number changed ?
+ cmp4.ne p7,p0 = r28,r10
+(p7) br.cond.dpnt.few .time_redo // sequence number changed, redo
+ // End critical section.
// Now r8=tv->tv_nsec and r9=tv->tv_sec
mov r10 = r0
movl r2 = 1000000000
@@ -308,19 +305,19 @@
.time_normalize:
mov r21 = r8
cmp.ge p6,p0 = r8,r2
-(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting some time
+(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting time
;;
(p14) setf.sig f8 = r20
(p6) sub r8 = r8,r2
-(p6) add r9 = 1,r9 // two nops before the branch.
-(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod
+(p6) add r9 = 1,r9 // two nops before the branch.
+(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod
(p6) br.cond.dpnt.few .time_normalize
;;
// Divided by 8 though shift. Now divide by 125
// The compiler was able to do that with a multiply
// and a shift and we do the same
-EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles
-(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it...
+EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles
+(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it
;;
mov r8 = r0
(p14) getf.sig r2 = f8
diff --git a/arch/ia64/kernel/fsyscall_gtod_data.h b/arch/ia64/kernel/fsyscall_gtod_data.h
new file mode 100644
index 0000000..490dab5
--- /dev/null
+++ b/arch/ia64/kernel/fsyscall_gtod_data.h
@@ -0,0 +1,23 @@
+/*
+ * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
+ * Contributed by Peter Keilty <peter.keilty@hp.com>
+ *
+ * fsyscall gettimeofday data
+ */
+
+struct fsyscall_gtod_data_t {
+ seqlock_t lock;
+ struct timespec wall_time;
+ struct timespec monotonic_time;
+ cycle_t clk_mask;
+ u32 clk_mult;
+ u32 clk_shift;
+ void *clk_fsys_mmio;
+ cycle_t clk_cycle_last;
+} __attribute__ ((aligned (L1_CACHE_BYTES)));
+
+struct itc_jitter_data_t {
+ int itc_jitter;
+ cycle_t itc_lastcycle;
+} __attribute__ ((aligned (L1_CACHE_BYTES)));
+
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 37f4652..91e6dc1 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -118,15 +118,25 @@
* vector.
*/
-struct iosapic_rte_info {
- struct list_head rte_list; /* node in list of RTEs sharing the
- * same vector */
+#define NO_REF_RTE 0
+
+static struct iosapic {
char __iomem *addr; /* base address of IOSAPIC */
- unsigned int gsi_base; /* first GSI assigned to this
- * IOSAPIC */
+ unsigned int gsi_base; /* GSI base */
+ unsigned short num_rte; /* # of RTEs on this IOSAPIC */
+ int rtes_inuse; /* # of RTEs in use on this IOSAPIC */
+#ifdef CONFIG_NUMA
+ unsigned short node; /* numa node association via pxm */
+#endif
+ spinlock_t lock; /* lock for indirect reg access */
+} iosapic_lists[NR_IOSAPICS];
+
+struct iosapic_rte_info {
+ struct list_head rte_list; /* RTEs sharing the same vector */
char rte_index; /* IOSAPIC RTE index */
int refcnt; /* reference counter */
unsigned int flags; /* flags */
+ struct iosapic *iosapic;
} ____cacheline_aligned;
static struct iosapic_intr_info {
@@ -140,24 +150,23 @@
unsigned char polarity: 1; /* interrupt polarity
* (see iosapic.h) */
unsigned char trigger : 1; /* trigger mode (see iosapic.h) */
-} iosapic_intr_info[IA64_NUM_VECTORS];
-
-static struct iosapic {
- char __iomem *addr; /* base address of IOSAPIC */
- unsigned int gsi_base; /* first GSI assigned to this
- * IOSAPIC */
- unsigned short num_rte; /* # of RTEs on this IOSAPIC */
- int rtes_inuse; /* # of RTEs in use on this IOSAPIC */
-#ifdef CONFIG_NUMA
- unsigned short node; /* numa node association via pxm */
-#endif
-} iosapic_lists[NR_IOSAPICS];
+} iosapic_intr_info[NR_IRQS];
static unsigned char pcat_compat __devinitdata; /* 8259 compatibility flag */
static int iosapic_kmalloc_ok;
static LIST_HEAD(free_rte_list);
+static inline void
+iosapic_write(struct iosapic *iosapic, unsigned int reg, u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&iosapic->lock, flags);
+ __iosapic_write(iosapic->addr, reg, val);
+ spin_unlock_irqrestore(&iosapic->lock, flags);
+}
+
/*
* Find an IOSAPIC associated with a GSI
*/
@@ -175,17 +184,18 @@
return -1;
}
-static inline int
-_gsi_to_vector (unsigned int gsi)
+static inline int __gsi_to_irq(unsigned int gsi)
{
+ int irq;
struct iosapic_intr_info *info;
struct iosapic_rte_info *rte;
- for (info = iosapic_intr_info; info <
- iosapic_intr_info + IA64_NUM_VECTORS; ++info)
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ info = &iosapic_intr_info[irq];
list_for_each_entry(rte, &info->rtes, rte_list)
- if (rte->gsi_base + rte->rte_index == gsi)
- return info - iosapic_intr_info;
+ if (rte->iosapic->gsi_base + rte->rte_index == gsi)
+ return irq;
+ }
return -1;
}
@@ -196,7 +206,10 @@
inline int
gsi_to_vector (unsigned int gsi)
{
- return _gsi_to_vector(gsi);
+ int irq = __gsi_to_irq(gsi);
+ if (check_irq_used(irq) < 0)
+ return -1;
+ return irq_to_vector(irq);
}
int
@@ -204,66 +217,48 @@
{
unsigned long flags;
int irq;
- /*
- * XXX fix me: this assumes an identity mapping between IA-64 vector
- * and Linux irq numbers...
- */
- spin_lock_irqsave(&iosapic_lock, flags);
- {
- irq = _gsi_to_vector(gsi);
- }
- spin_unlock_irqrestore(&iosapic_lock, flags);
+ spin_lock_irqsave(&iosapic_lock, flags);
+ irq = __gsi_to_irq(gsi);
+ spin_unlock_irqrestore(&iosapic_lock, flags);
return irq;
}
-static struct iosapic_rte_info *gsi_vector_to_rte(unsigned int gsi,
- unsigned int vec)
+static struct iosapic_rte_info *find_rte(unsigned int irq, unsigned int gsi)
{
struct iosapic_rte_info *rte;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list)
- if (rte->gsi_base + rte->rte_index == gsi)
+ list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list)
+ if (rte->iosapic->gsi_base + rte->rte_index == gsi)
return rte;
return NULL;
}
static void
-set_rte (unsigned int gsi, unsigned int vector, unsigned int dest, int mask)
+set_rte (unsigned int gsi, unsigned int irq, unsigned int dest, int mask)
{
unsigned long pol, trigger, dmode;
u32 low32, high32;
- char __iomem *addr;
int rte_index;
char redir;
struct iosapic_rte_info *rte;
+ ia64_vector vector = irq_to_vector(irq);
DBG(KERN_DEBUG"IOSAPIC: routing vector %d to 0x%x\n", vector, dest);
- rte = gsi_vector_to_rte(gsi, vector);
+ rte = find_rte(irq, gsi);
if (!rte)
return; /* not an IOSAPIC interrupt */
rte_index = rte->rte_index;
- addr = rte->addr;
- pol = iosapic_intr_info[vector].polarity;
- trigger = iosapic_intr_info[vector].trigger;
- dmode = iosapic_intr_info[vector].dmode;
+ pol = iosapic_intr_info[irq].polarity;
+ trigger = iosapic_intr_info[irq].trigger;
+ dmode = iosapic_intr_info[irq].dmode;
redir = (dmode == IOSAPIC_LOWEST_PRIORITY) ? 1 : 0;
#ifdef CONFIG_SMP
- {
- unsigned int irq;
-
- for (irq = 0; irq < NR_IRQS; ++irq)
- if (irq_to_vector(irq) == vector) {
- set_irq_affinity_info(irq,
- (int)(dest & 0xffff),
- redir);
- break;
- }
- }
+ set_irq_affinity_info(irq, (int)(dest & 0xffff), redir);
#endif
low32 = ((pol << IOSAPIC_POLARITY_SHIFT) |
@@ -275,10 +270,10 @@
/* dest contains both id and eid */
high32 = (dest << IOSAPIC_DEST_SHIFT);
- iosapic_write(addr, IOSAPIC_RTE_HIGH(rte_index), high32);
- iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
- iosapic_intr_info[vector].low32 = low32;
- iosapic_intr_info[vector].dest = dest;
+ iosapic_write(rte->iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
+ iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
+ iosapic_intr_info[irq].low32 = low32;
+ iosapic_intr_info[irq].dest = dest;
}
static void
@@ -294,15 +289,18 @@
{
struct iosapic_intr_info *info;
struct iosapic_rte_info *rte;
- u8 vec = 0;
- for (info = iosapic_intr_info; info <
- iosapic_intr_info + IA64_NUM_VECTORS; ++info, ++vec) {
+ ia64_vector vec;
+ int irq;
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ info = &iosapic_intr_info[irq];
+ vec = irq_to_vector(irq);
list_for_each_entry(rte, &info->rtes,
rte_list) {
- iosapic_write(rte->addr,
+ iosapic_write(rte->iosapic,
IOSAPIC_RTE_LOW(rte->rte_index),
IOSAPIC_MASK|vec);
- iosapic_eoi(rte->addr, vec);
+ iosapic_eoi(rte->iosapic->addr, vec);
}
}
}
@@ -311,54 +309,36 @@
static void
mask_irq (unsigned int irq)
{
- unsigned long flags;
- char __iomem *addr;
u32 low32;
int rte_index;
- ia64_vector vec = irq_to_vector(irq);
struct iosapic_rte_info *rte;
- if (list_empty(&iosapic_intr_info[vec].rtes))
+ if (list_empty(&iosapic_intr_info[irq].rtes))
return; /* not an IOSAPIC interrupt! */
- spin_lock_irqsave(&iosapic_lock, flags);
- {
- /* set only the mask bit */
- low32 = iosapic_intr_info[vec].low32 |= IOSAPIC_MASK;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
- rte_list) {
- addr = rte->addr;
- rte_index = rte->rte_index;
- iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
- }
+ /* set only the mask bit */
+ low32 = iosapic_intr_info[irq].low32 |= IOSAPIC_MASK;
+ list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) {
+ rte_index = rte->rte_index;
+ iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
}
- spin_unlock_irqrestore(&iosapic_lock, flags);
}
static void
unmask_irq (unsigned int irq)
{
- unsigned long flags;
- char __iomem *addr;
u32 low32;
int rte_index;
- ia64_vector vec = irq_to_vector(irq);
struct iosapic_rte_info *rte;
- if (list_empty(&iosapic_intr_info[vec].rtes))
+ if (list_empty(&iosapic_intr_info[irq].rtes))
return; /* not an IOSAPIC interrupt! */
- spin_lock_irqsave(&iosapic_lock, flags);
- {
- low32 = iosapic_intr_info[vec].low32 &= ~IOSAPIC_MASK;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
- rte_list) {
- addr = rte->addr;
- rte_index = rte->rte_index;
- iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
- }
+ low32 = iosapic_intr_info[irq].low32 &= ~IOSAPIC_MASK;
+ list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) {
+ rte_index = rte->rte_index;
+ iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
}
- spin_unlock_irqrestore(&iosapic_lock, flags);
}
@@ -366,23 +346,24 @@
iosapic_set_affinity (unsigned int irq, cpumask_t mask)
{
#ifdef CONFIG_SMP
- unsigned long flags;
u32 high32, low32;
int dest, rte_index;
- char __iomem *addr;
int redir = (irq & IA64_IRQ_REDIRECTED) ? 1 : 0;
- ia64_vector vec;
struct iosapic_rte_info *rte;
+ struct iosapic *iosapic;
irq &= (~IA64_IRQ_REDIRECTED);
- vec = irq_to_vector(irq);
+ cpus_and(mask, mask, cpu_online_map);
if (cpus_empty(mask))
return;
+ if (reassign_irq_vector(irq, first_cpu(mask)))
+ return;
+
dest = cpu_physical_id(first_cpu(mask));
- if (list_empty(&iosapic_intr_info[vec].rtes))
+ if (list_empty(&iosapic_intr_info[irq].rtes))
return; /* not an IOSAPIC interrupt */
set_irq_affinity_info(irq, dest, redir);
@@ -390,31 +371,24 @@
/* dest contains both id and eid */
high32 = dest << IOSAPIC_DEST_SHIFT;
- spin_lock_irqsave(&iosapic_lock, flags);
- {
- low32 = iosapic_intr_info[vec].low32 &
- ~(7 << IOSAPIC_DELIVERY_SHIFT);
+ low32 = iosapic_intr_info[irq].low32 & ~(7 << IOSAPIC_DELIVERY_SHIFT);
+ if (redir)
+ /* change delivery mode to lowest priority */
+ low32 |= (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT);
+ else
+ /* change delivery mode to fixed */
+ low32 |= (IOSAPIC_FIXED << IOSAPIC_DELIVERY_SHIFT);
+ low32 &= IOSAPIC_VECTOR_MASK;
+ low32 |= irq_to_vector(irq);
- if (redir)
- /* change delivery mode to lowest priority */
- low32 |= (IOSAPIC_LOWEST_PRIORITY <<
- IOSAPIC_DELIVERY_SHIFT);
- else
- /* change delivery mode to fixed */
- low32 |= (IOSAPIC_FIXED << IOSAPIC_DELIVERY_SHIFT);
-
- iosapic_intr_info[vec].low32 = low32;
- iosapic_intr_info[vec].dest = dest;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
- rte_list) {
- addr = rte->addr;
- rte_index = rte->rte_index;
- iosapic_write(addr, IOSAPIC_RTE_HIGH(rte_index),
- high32);
- iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
- }
+ iosapic_intr_info[irq].low32 = low32;
+ iosapic_intr_info[irq].dest = dest;
+ list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) {
+ iosapic = rte->iosapic;
+ rte_index = rte->rte_index;
+ iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
+ iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
}
- spin_unlock_irqrestore(&iosapic_lock, flags);
#endif
}
@@ -434,10 +408,20 @@
{
ia64_vector vec = irq_to_vector(irq);
struct iosapic_rte_info *rte;
+ int do_unmask_irq = 0;
- move_native_irq(irq);
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list)
- iosapic_eoi(rte->addr, vec);
+ if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
+ do_unmask_irq = 1;
+ mask_irq(irq);
+ }
+
+ list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list)
+ iosapic_eoi(rte->iosapic->addr, vec);
+
+ if (unlikely(do_unmask_irq)) {
+ move_masked_irq(irq);
+ unmask_irq(irq);
+ }
}
#define iosapic_shutdown_level_irq mask_irq
@@ -519,13 +503,12 @@
* unsigned int reserved2 : 8;
* }
*/
- return iosapic_read(addr, IOSAPIC_VERSION);
+ return __iosapic_read(addr, IOSAPIC_VERSION);
}
-static int iosapic_find_sharable_vector (unsigned long trigger,
- unsigned long pol)
+static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol)
{
- int i, vector = -1, min_count = -1;
+ int i, irq = -ENOSPC, min_count = -1;
struct iosapic_intr_info *info;
/*
@@ -533,21 +516,21 @@
* supported yet
*/
if (trigger == IOSAPIC_EDGE)
- return -1;
+ return -EINVAL;
- for (i = IA64_FIRST_DEVICE_VECTOR; i <= IA64_LAST_DEVICE_VECTOR; i++) {
+ for (i = 0; i <= NR_IRQS; i++) {
info = &iosapic_intr_info[i];
if (info->trigger == trigger && info->polarity == pol &&
- (info->dmode == IOSAPIC_FIXED || info->dmode ==
- IOSAPIC_LOWEST_PRIORITY)) {
+ (info->dmode == IOSAPIC_FIXED ||
+ info->dmode == IOSAPIC_LOWEST_PRIORITY) &&
+ can_request_irq(i, IRQF_SHARED)) {
if (min_count == -1 || info->count < min_count) {
- vector = i;
+ irq = i;
min_count = info->count;
}
}
}
-
- return vector;
+ return irq;
}
/*
@@ -555,25 +538,25 @@
* assign a new vector for the other and make the vector available
*/
static void __init
-iosapic_reassign_vector (int vector)
+iosapic_reassign_vector (int irq)
{
- int new_vector;
+ int new_irq;
- if (!list_empty(&iosapic_intr_info[vector].rtes)) {
- new_vector = assign_irq_vector(AUTO_ASSIGN);
- if (new_vector < 0)
+ if (!list_empty(&iosapic_intr_info[irq].rtes)) {
+ new_irq = create_irq();
+ if (new_irq < 0)
panic("%s: out of interrupt vectors!\n", __FUNCTION__);
printk(KERN_INFO "Reassigning vector %d to %d\n",
- vector, new_vector);
- memcpy(&iosapic_intr_info[new_vector], &iosapic_intr_info[vector],
+ irq_to_vector(irq), irq_to_vector(new_irq));
+ memcpy(&iosapic_intr_info[new_irq], &iosapic_intr_info[irq],
sizeof(struct iosapic_intr_info));
- INIT_LIST_HEAD(&iosapic_intr_info[new_vector].rtes);
- list_move(iosapic_intr_info[vector].rtes.next,
- &iosapic_intr_info[new_vector].rtes);
- memset(&iosapic_intr_info[vector], 0,
+ INIT_LIST_HEAD(&iosapic_intr_info[new_irq].rtes);
+ list_move(iosapic_intr_info[irq].rtes.next,
+ &iosapic_intr_info[new_irq].rtes);
+ memset(&iosapic_intr_info[irq], 0,
sizeof(struct iosapic_intr_info));
- iosapic_intr_info[vector].low32 = IOSAPIC_MASK;
- INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
+ iosapic_intr_info[irq].low32 = IOSAPIC_MASK;
+ INIT_LIST_HEAD(&iosapic_intr_info[irq].rtes);
}
}
@@ -610,29 +593,18 @@
return rte;
}
-static void iosapic_free_rte (struct iosapic_rte_info *rte)
+static inline int irq_is_shared (int irq)
{
- if (rte->flags & RTE_PREALLOCATED)
- list_add_tail(&rte->rte_list, &free_rte_list);
- else
- kfree(rte);
-}
-
-static inline int vector_is_shared (int vector)
-{
- return (iosapic_intr_info[vector].count > 1);
+ return (iosapic_intr_info[irq].count > 1);
}
static int
-register_intr (unsigned int gsi, int vector, unsigned char delivery,
+register_intr (unsigned int gsi, int irq, unsigned char delivery,
unsigned long polarity, unsigned long trigger)
{
irq_desc_t *idesc;
struct hw_interrupt_type *irq_type;
- int rte_index;
int index;
- unsigned long gsi_base;
- void __iomem *iosapic_address;
struct iosapic_rte_info *rte;
index = find_iosapic(gsi);
@@ -642,10 +614,7 @@
return -ENODEV;
}
- iosapic_address = iosapic_lists[index].addr;
- gsi_base = iosapic_lists[index].gsi_base;
-
- rte = gsi_vector_to_rte(gsi, vector);
+ rte = find_rte(irq, gsi);
if (!rte) {
rte = iosapic_alloc_rte();
if (!rte) {
@@ -654,40 +623,42 @@
return -ENOMEM;
}
- rte_index = gsi - gsi_base;
- rte->rte_index = rte_index;
- rte->addr = iosapic_address;
- rte->gsi_base = gsi_base;
+ rte->iosapic = &iosapic_lists[index];
+ rte->rte_index = gsi - rte->iosapic->gsi_base;
rte->refcnt++;
- list_add_tail(&rte->rte_list, &iosapic_intr_info[vector].rtes);
- iosapic_intr_info[vector].count++;
+ list_add_tail(&rte->rte_list, &iosapic_intr_info[irq].rtes);
+ iosapic_intr_info[irq].count++;
iosapic_lists[index].rtes_inuse++;
}
- else if (vector_is_shared(vector)) {
- struct iosapic_intr_info *info = &iosapic_intr_info[vector];
- if (info->trigger != trigger || info->polarity != polarity) {
+ else if (rte->refcnt == NO_REF_RTE) {
+ struct iosapic_intr_info *info = &iosapic_intr_info[irq];
+ if (info->count > 0 &&
+ (info->trigger != trigger || info->polarity != polarity)){
printk (KERN_WARNING
"%s: cannot override the interrupt\n",
__FUNCTION__);
return -EINVAL;
}
+ rte->refcnt++;
+ iosapic_intr_info[irq].count++;
+ iosapic_lists[index].rtes_inuse++;
}
- iosapic_intr_info[vector].polarity = polarity;
- iosapic_intr_info[vector].dmode = delivery;
- iosapic_intr_info[vector].trigger = trigger;
+ iosapic_intr_info[irq].polarity = polarity;
+ iosapic_intr_info[irq].dmode = delivery;
+ iosapic_intr_info[irq].trigger = trigger;
if (trigger == IOSAPIC_EDGE)
irq_type = &irq_type_iosapic_edge;
else
irq_type = &irq_type_iosapic_level;
- idesc = irq_desc + vector;
+ idesc = irq_desc + irq;
if (idesc->chip != irq_type) {
if (idesc->chip != &no_irq_type)
printk(KERN_WARNING
"%s: changing vector %d from %s to %s\n",
- __FUNCTION__, vector,
+ __FUNCTION__, irq_to_vector(irq),
idesc->chip->name, irq_type->name);
idesc->chip = irq_type;
}
@@ -695,18 +666,19 @@
}
static unsigned int
-get_target_cpu (unsigned int gsi, int vector)
+get_target_cpu (unsigned int gsi, int irq)
{
#ifdef CONFIG_SMP
static int cpu = -1;
extern int cpe_vector;
+ cpumask_t domain = irq_to_domain(irq);
/*
* In case of vector shared by multiple RTEs, all RTEs that
* share the vector need to use the same destination CPU.
*/
- if (!list_empty(&iosapic_intr_info[vector].rtes))
- return iosapic_intr_info[vector].dest;
+ if (!list_empty(&iosapic_intr_info[irq].rtes))
+ return iosapic_intr_info[irq].dest;
/*
* If the platform supports redirection via XTP, let it
@@ -723,7 +695,7 @@
return cpu_physical_id(smp_processor_id());
#ifdef CONFIG_ACPI
- if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR)
+ if (cpe_vector > 0 && irq_to_vector(irq) == IA64_CPEP_VECTOR)
return get_cpei_target_cpu();
#endif
@@ -738,7 +710,7 @@
goto skip_numa_setup;
cpu_mask = node_to_cpumask(iosapic_lists[iosapic_index].node);
-
+ cpus_and(cpu_mask, cpu_mask, domain);
for_each_cpu_mask(numa_cpu, cpu_mask) {
if (!cpu_online(numa_cpu))
cpu_clear(numa_cpu, cpu_mask);
@@ -749,8 +721,8 @@
if (!num_cpus)
goto skip_numa_setup;
- /* Use vector assignment to distribute across cpus in node */
- cpu_index = vector % num_cpus;
+ /* Use irq assignment to distribute across cpus in node */
+ cpu_index = irq % num_cpus;
for (numa_cpu = first_cpu(cpu_mask) ; i < cpu_index ; i++)
numa_cpu = next_cpu(numa_cpu, cpu_mask);
@@ -768,7 +740,7 @@
do {
if (++cpu >= NR_CPUS)
cpu = 0;
- } while (!cpu_online(cpu));
+ } while (!cpu_online(cpu) || !cpu_isset(cpu, domain));
return cpu_physical_id(cpu);
#else /* CONFIG_SMP */
@@ -785,84 +757,72 @@
iosapic_register_intr (unsigned int gsi,
unsigned long polarity, unsigned long trigger)
{
- int vector, mask = 1, err;
+ int irq, mask = 1, err;
unsigned int dest;
unsigned long flags;
struct iosapic_rte_info *rte;
u32 low32;
-again:
+
/*
* If this GSI has already been registered (i.e., it's a
* shared interrupt, or we lost a race to register it),
* don't touch the RTE.
*/
spin_lock_irqsave(&iosapic_lock, flags);
- {
- vector = gsi_to_vector(gsi);
- if (vector > 0) {
- rte = gsi_vector_to_rte(gsi, vector);
+ irq = __gsi_to_irq(gsi);
+ if (irq > 0) {
+ rte = find_rte(irq, gsi);
+ if(iosapic_intr_info[irq].count == 0) {
+ assign_irq_vector(irq);
+ dynamic_irq_init(irq);
+ } else if (rte->refcnt != NO_REF_RTE) {
rte->refcnt++;
- spin_unlock_irqrestore(&iosapic_lock, flags);
- return vector;
+ goto unlock_iosapic_lock;
}
- }
- spin_unlock_irqrestore(&iosapic_lock, flags);
+ } else
+ irq = create_irq();
/* If vector is running out, we try to find a sharable vector */
- vector = assign_irq_vector(AUTO_ASSIGN);
- if (vector < 0) {
- vector = iosapic_find_sharable_vector(trigger, polarity);
- if (vector < 0)
- return -ENOSPC;
+ if (irq < 0) {
+ irq = iosapic_find_sharable_irq(trigger, polarity);
+ if (irq < 0)
+ goto unlock_iosapic_lock;
}
- spin_lock_irqsave(&irq_desc[vector].lock, flags);
- spin_lock(&iosapic_lock);
- {
- if (gsi_to_vector(gsi) > 0) {
- if (list_empty(&iosapic_intr_info[vector].rtes))
- free_irq_vector(vector);
- spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_desc[vector].lock,
- flags);
- goto again;
- }
-
- dest = get_target_cpu(gsi, vector);
- err = register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY,
- polarity, trigger);
- if (err < 0) {
- spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_desc[vector].lock,
- flags);
- return err;
- }
-
- /*
- * If the vector is shared and already unmasked for
- * other interrupt sources, don't mask it.
- */
- low32 = iosapic_intr_info[vector].low32;
- if (vector_is_shared(vector) && !(low32 & IOSAPIC_MASK))
- mask = 0;
- set_rte(gsi, vector, dest, mask);
+ spin_lock(&irq_desc[irq].lock);
+ dest = get_target_cpu(gsi, irq);
+ err = register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY,
+ polarity, trigger);
+ if (err < 0) {
+ irq = err;
+ goto unlock_all;
}
- spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_desc[vector].lock, flags);
+
+ /*
+ * If the vector is shared and already unmasked for other
+ * interrupt sources, don't mask it.
+ */
+ low32 = iosapic_intr_info[irq].low32;
+ if (irq_is_shared(irq) && !(low32 & IOSAPIC_MASK))
+ mask = 0;
+ set_rte(gsi, irq, dest, mask);
printk(KERN_INFO "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d\n",
gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
(polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
- cpu_logical_id(dest), dest, vector);
-
- return vector;
+ cpu_logical_id(dest), dest, irq_to_vector(irq));
+ unlock_all:
+ spin_unlock(&irq_desc[irq].lock);
+ unlock_iosapic_lock:
+ spin_unlock_irqrestore(&iosapic_lock, flags);
+ return irq;
}
void
iosapic_unregister_intr (unsigned int gsi)
{
unsigned long flags;
- int irq, vector, index;
+ int irq, index;
irq_desc_t *idesc;
u32 low32;
unsigned long trigger, polarity;
@@ -881,78 +841,56 @@
WARN_ON(1);
return;
}
- vector = irq_to_vector(irq);
+
+ spin_lock_irqsave(&iosapic_lock, flags);
+ if ((rte = find_rte(irq, gsi)) == NULL) {
+ printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n",
+ gsi);
+ WARN_ON(1);
+ goto out;
+ }
+
+ if (--rte->refcnt > 0)
+ goto out;
idesc = irq_desc + irq;
- spin_lock_irqsave(&idesc->lock, flags);
- spin_lock(&iosapic_lock);
- {
- if ((rte = gsi_vector_to_rte(gsi, vector)) == NULL) {
- printk(KERN_ERR
- "iosapic_unregister_intr(%u) unbalanced\n",
- gsi);
- WARN_ON(1);
- goto out;
- }
+ rte->refcnt = NO_REF_RTE;
- if (--rte->refcnt > 0)
- goto out;
+ /* Mask the interrupt */
+ low32 = iosapic_intr_info[irq].low32 | IOSAPIC_MASK;
+ iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte->rte_index), low32);
- /* Mask the interrupt */
- low32 = iosapic_intr_info[vector].low32 | IOSAPIC_MASK;
- iosapic_write(rte->addr, IOSAPIC_RTE_LOW(rte->rte_index),
- low32);
+ iosapic_intr_info[irq].count--;
+ index = find_iosapic(gsi);
+ iosapic_lists[index].rtes_inuse--;
+ WARN_ON(iosapic_lists[index].rtes_inuse < 0);
- /* Remove the rte entry from the list */
- list_del(&rte->rte_list);
- iosapic_intr_info[vector].count--;
- iosapic_free_rte(rte);
- index = find_iosapic(gsi);
- iosapic_lists[index].rtes_inuse--;
- WARN_ON(iosapic_lists[index].rtes_inuse < 0);
+ trigger = iosapic_intr_info[irq].trigger;
+ polarity = iosapic_intr_info[irq].polarity;
+ dest = iosapic_intr_info[irq].dest;
+ printk(KERN_INFO
+ "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d unregistered\n",
+ gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
+ (polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
+ cpu_logical_id(dest), dest, irq_to_vector(irq));
- trigger = iosapic_intr_info[vector].trigger;
- polarity = iosapic_intr_info[vector].polarity;
- dest = iosapic_intr_info[vector].dest;
- printk(KERN_INFO
- "GSI %u (%s, %s) -> CPU %d (0x%04x)"
- " vector %d unregistered\n",
- gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
- (polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
- cpu_logical_id(dest), dest, vector);
-
- if (list_empty(&iosapic_intr_info[vector].rtes)) {
- /* Sanity check */
- BUG_ON(iosapic_intr_info[vector].count);
-
- /* Clear the interrupt controller descriptor */
- idesc->chip = &no_irq_type;
-
+ if (iosapic_intr_info[irq].count == 0) {
#ifdef CONFIG_SMP
- /* Clear affinity */
- cpus_setall(idesc->affinity);
+ /* Clear affinity */
+ cpus_setall(idesc->affinity);
#endif
+ /* Clear the interrupt information */
+ iosapic_intr_info[irq].dest = 0;
+ iosapic_intr_info[irq].dmode = 0;
+ iosapic_intr_info[irq].polarity = 0;
+ iosapic_intr_info[irq].trigger = 0;
+ iosapic_intr_info[irq].low32 |= IOSAPIC_MASK;
- /* Clear the interrupt information */
- memset(&iosapic_intr_info[vector], 0,
- sizeof(struct iosapic_intr_info));
- iosapic_intr_info[vector].low32 |= IOSAPIC_MASK;
- INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
-
- if (idesc->action) {
- printk(KERN_ERR
- "interrupt handlers still exist on"
- "IRQ %u\n", irq);
- WARN_ON(1);
- }
-
- /* Free the interrupt vector */
- free_irq_vector(vector);
- }
+ /* Destroy and reserve IRQ */
+ destroy_and_reserve_irq(irq);
}
out:
- spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&idesc->lock, flags);
+ spin_unlock_irqrestore(&iosapic_lock, flags);
}
/*
@@ -965,27 +903,30 @@
{
static const char * const name[] = {"unknown", "PMI", "INIT", "CPEI"};
unsigned char delivery;
- int vector, mask = 0;
+ int irq, vector, mask = 0;
unsigned int dest = ((id << 8) | eid) & 0xffff;
switch (int_type) {
case ACPI_INTERRUPT_PMI:
- vector = iosapic_vector;
+ irq = vector = iosapic_vector;
+ bind_irq_vector(irq, vector, CPU_MASK_ALL);
/*
* since PMI vector is alloc'd by FW(ACPI) not by kernel,
* we need to make sure the vector is available
*/
- iosapic_reassign_vector(vector);
+ iosapic_reassign_vector(irq);
delivery = IOSAPIC_PMI;
break;
case ACPI_INTERRUPT_INIT:
- vector = assign_irq_vector(AUTO_ASSIGN);
- if (vector < 0)
+ irq = create_irq();
+ if (irq < 0)
panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ vector = irq_to_vector(irq);
delivery = IOSAPIC_INIT;
break;
case ACPI_INTERRUPT_CPEI:
- vector = IA64_CPE_VECTOR;
+ irq = vector = IA64_CPE_VECTOR;
+ BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL));
delivery = IOSAPIC_LOWEST_PRIORITY;
mask = 1;
break;
@@ -995,7 +936,7 @@
return -1;
}
- register_intr(gsi, vector, delivery, polarity, trigger);
+ register_intr(gsi, irq, delivery, polarity, trigger);
printk(KERN_INFO
"PLATFORM int %s (0x%x): GSI %u (%s, %s) -> CPU %d (0x%04x)"
@@ -1005,7 +946,7 @@
(polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
cpu_logical_id(dest), dest, vector);
- set_rte(gsi, vector, dest, mask);
+ set_rte(gsi, irq, dest, mask);
return vector;
}
@@ -1017,30 +958,32 @@
unsigned long polarity,
unsigned long trigger)
{
- int vector;
+ int vector, irq;
unsigned int dest = cpu_physical_id(smp_processor_id());
- vector = isa_irq_to_vector(isa_irq);
-
- register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, polarity, trigger);
+ irq = vector = isa_irq_to_vector(isa_irq);
+ BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL));
+ register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY, polarity, trigger);
DBG("ISA: IRQ %u -> GSI %u (%s,%s) -> CPU %d (0x%04x) vector %d\n",
isa_irq, gsi, trigger == IOSAPIC_EDGE ? "edge" : "level",
polarity == IOSAPIC_POL_HIGH ? "high" : "low",
cpu_logical_id(dest), dest, vector);
- set_rte(gsi, vector, dest, 1);
+ set_rte(gsi, irq, dest, 1);
}
void __init
iosapic_system_init (int system_pcat_compat)
{
- int vector;
+ int irq;
- for (vector = 0; vector < IA64_NUM_VECTORS; ++vector) {
- iosapic_intr_info[vector].low32 = IOSAPIC_MASK;
+ for (irq = 0; irq < NR_IRQS; ++irq) {
+ iosapic_intr_info[irq].low32 = IOSAPIC_MASK;
/* mark as unused */
- INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
+ INIT_LIST_HEAD(&iosapic_intr_info[irq].rtes);
+
+ iosapic_intr_info[irq].count = 0;
}
pcat_compat = system_pcat_compat;
@@ -1108,31 +1051,35 @@
unsigned long flags;
spin_lock_irqsave(&iosapic_lock, flags);
- {
- addr = ioremap(phys_addr, 0);
- ver = iosapic_version(addr);
-
- if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
- iounmap(addr);
- spin_unlock_irqrestore(&iosapic_lock, flags);
- return err;
- }
-
- /*
- * The MAX_REDIR register holds the highest input pin
- * number (starting from 0).
- * We add 1 so that we can use it for number of pins (= RTEs)
- */
- num_rte = ((ver >> 16) & 0xff) + 1;
-
- index = iosapic_alloc();
- iosapic_lists[index].addr = addr;
- iosapic_lists[index].gsi_base = gsi_base;
- iosapic_lists[index].num_rte = num_rte;
-#ifdef CONFIG_NUMA
- iosapic_lists[index].node = MAX_NUMNODES;
-#endif
+ index = find_iosapic(gsi_base);
+ if (index >= 0) {
+ spin_unlock_irqrestore(&iosapic_lock, flags);
+ return -EBUSY;
}
+
+ addr = ioremap(phys_addr, 0);
+ ver = iosapic_version(addr);
+ if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
+ iounmap(addr);
+ spin_unlock_irqrestore(&iosapic_lock, flags);
+ return err;
+ }
+
+ /*
+ * The MAX_REDIR register holds the highest input pin number
+ * (starting from 0). We add 1 so that we can use it for
+ * number of pins (= RTEs)
+ */
+ num_rte = ((ver >> 16) & 0xff) + 1;
+
+ index = iosapic_alloc();
+ iosapic_lists[index].addr = addr;
+ iosapic_lists[index].gsi_base = gsi_base;
+ iosapic_lists[index].num_rte = num_rte;
+#ifdef CONFIG_NUMA
+ iosapic_lists[index].node = MAX_NUMNODES;
+#endif
+ spin_lock_init(&iosapic_lists[index].lock);
spin_unlock_irqrestore(&iosapic_lock, flags);
if ((gsi_base == 0) && pcat_compat) {
@@ -1157,25 +1104,22 @@
unsigned long flags;
spin_lock_irqsave(&iosapic_lock, flags);
- {
- index = find_iosapic(gsi_base);
- if (index < 0) {
- printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
- __FUNCTION__, gsi_base);
- goto out;
- }
-
- if (iosapic_lists[index].rtes_inuse) {
- err = -EBUSY;
- printk(KERN_WARNING
- "%s: IOSAPIC for GSI base %u is busy\n",
- __FUNCTION__, gsi_base);
- goto out;
- }
-
- iounmap(iosapic_lists[index].addr);
- iosapic_free(index);
+ index = find_iosapic(gsi_base);
+ if (index < 0) {
+ printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
+ __FUNCTION__, gsi_base);
+ goto out;
}
+
+ if (iosapic_lists[index].rtes_inuse) {
+ err = -EBUSY;
+ printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
+ __FUNCTION__, gsi_base);
+ goto out;
+ }
+
+ iounmap(iosapic_lists[index].addr);
+ iosapic_free(index);
out:
spin_unlock_irqrestore(&iosapic_lock, flags);
return err;
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 407b458..cc3ee4e 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -35,7 +35,7 @@
#ifdef CONFIG_IA64_GENERIC
unsigned int __ia64_local_vector_to_irq (ia64_vector vec)
{
- return (unsigned int) vec;
+ return __get_cpu_var(vector_irq)[vec];
}
#endif
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index bc47049..91797c1 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -46,6 +46,12 @@
#define IRQ_DEBUG 0
+#define IRQ_VECTOR_UNASSIGNED (0)
+
+#define IRQ_UNUSED (0)
+#define IRQ_USED (1)
+#define IRQ_RSVD (2)
+
/* These can be overridden in platform_irq_init */
int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR;
int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR;
@@ -54,6 +60,8 @@
void __iomem *ipi_base_addr = ((void __iomem *)
(__IA64_UNCACHED_OFFSET | IA64_IPI_DEFAULT_BASE_ADDR));
+static cpumask_t vector_allocation_domain(int cpu);
+
/*
* Legacy IRQ to IA-64 vector translation table.
*/
@@ -64,46 +72,269 @@
};
EXPORT_SYMBOL(isa_irq_to_vector_map);
-static unsigned long ia64_vector_mask[BITS_TO_LONGS(IA64_MAX_DEVICE_VECTORS)];
+DEFINE_SPINLOCK(vector_lock);
+
+struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
+ [0 ... NR_IRQS - 1] = {
+ .vector = IRQ_VECTOR_UNASSIGNED,
+ .domain = CPU_MASK_NONE
+ }
+};
+
+DEFINE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq) = {
+ [0 ... IA64_NUM_VECTORS - 1] = IA64_SPURIOUS_INT_VECTOR
+};
+
+static cpumask_t vector_table[IA64_MAX_DEVICE_VECTORS] = {
+ [0 ... IA64_MAX_DEVICE_VECTORS - 1] = CPU_MASK_NONE
+};
+
+static int irq_status[NR_IRQS] = {
+ [0 ... NR_IRQS -1] = IRQ_UNUSED
+};
+
+int check_irq_used(int irq)
+{
+ if (irq_status[irq] == IRQ_USED)
+ return 1;
+
+ return -1;
+}
+
+static void reserve_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ irq_status[irq] = IRQ_RSVD;
+ spin_unlock_irqrestore(&vector_lock, flags);
+}
+
+static inline int find_unassigned_irq(void)
+{
+ int irq;
+
+ for (irq = IA64_FIRST_DEVICE_VECTOR; irq < NR_IRQS; irq++)
+ if (irq_status[irq] == IRQ_UNUSED)
+ return irq;
+ return -ENOSPC;
+}
+
+static inline int find_unassigned_vector(cpumask_t domain)
+{
+ cpumask_t mask;
+ int pos;
+
+ cpus_and(mask, domain, cpu_online_map);
+ if (cpus_empty(mask))
+ return -EINVAL;
+
+ for (pos = 0; pos < IA64_NUM_DEVICE_VECTORS; pos++) {
+ cpus_and(mask, domain, vector_table[pos]);
+ if (!cpus_empty(mask))
+ continue;
+ return IA64_FIRST_DEVICE_VECTOR + pos;
+ }
+ return -ENOSPC;
+}
+
+static int __bind_irq_vector(int irq, int vector, cpumask_t domain)
+{
+ cpumask_t mask;
+ int cpu, pos;
+ struct irq_cfg *cfg = &irq_cfg[irq];
+
+ cpus_and(mask, domain, cpu_online_map);
+ if (cpus_empty(mask))
+ return -EINVAL;
+ if ((cfg->vector == vector) && cpus_equal(cfg->domain, domain))
+ return 0;
+ if (cfg->vector != IRQ_VECTOR_UNASSIGNED)
+ return -EBUSY;
+ for_each_cpu_mask(cpu, mask)
+ per_cpu(vector_irq, cpu)[vector] = irq;
+ cfg->vector = vector;
+ cfg->domain = domain;
+ irq_status[irq] = IRQ_USED;
+ pos = vector - IA64_FIRST_DEVICE_VECTOR;
+ cpus_or(vector_table[pos], vector_table[pos], domain);
+ return 0;
+}
+
+int bind_irq_vector(int irq, int vector, cpumask_t domain)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ ret = __bind_irq_vector(irq, vector, domain);
+ spin_unlock_irqrestore(&vector_lock, flags);
+ return ret;
+}
+
+static void __clear_irq_vector(int irq)
+{
+ int vector, cpu, pos;
+ cpumask_t mask;
+ cpumask_t domain;
+ struct irq_cfg *cfg = &irq_cfg[irq];
+
+ BUG_ON((unsigned)irq >= NR_IRQS);
+ BUG_ON(cfg->vector == IRQ_VECTOR_UNASSIGNED);
+ vector = cfg->vector;
+ domain = cfg->domain;
+ cpus_and(mask, cfg->domain, cpu_online_map);
+ for_each_cpu_mask(cpu, mask)
+ per_cpu(vector_irq, cpu)[vector] = IA64_SPURIOUS_INT_VECTOR;
+ cfg->vector = IRQ_VECTOR_UNASSIGNED;
+ cfg->domain = CPU_MASK_NONE;
+ irq_status[irq] = IRQ_UNUSED;
+ pos = vector - IA64_FIRST_DEVICE_VECTOR;
+ cpus_andnot(vector_table[pos], vector_table[pos], domain);
+}
+
+static void clear_irq_vector(int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ __clear_irq_vector(irq);
+ spin_unlock_irqrestore(&vector_lock, flags);
+}
int
assign_irq_vector (int irq)
{
- int pos, vector;
- again:
- pos = find_first_zero_bit(ia64_vector_mask, IA64_NUM_DEVICE_VECTORS);
- vector = IA64_FIRST_DEVICE_VECTOR + pos;
- if (vector > IA64_LAST_DEVICE_VECTOR)
- return -ENOSPC;
- if (test_and_set_bit(pos, ia64_vector_mask))
- goto again;
+ unsigned long flags;
+ int vector, cpu;
+ cpumask_t domain;
+
+ vector = -ENOSPC;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ if (irq < 0) {
+ goto out;
+ }
+ for_each_online_cpu(cpu) {
+ domain = vector_allocation_domain(cpu);
+ vector = find_unassigned_vector(domain);
+ if (vector >= 0)
+ break;
+ }
+ if (vector < 0)
+ goto out;
+ BUG_ON(__bind_irq_vector(irq, vector, domain));
+ out:
+ spin_unlock_irqrestore(&vector_lock, flags);
return vector;
}
void
free_irq_vector (int vector)
{
- int pos;
-
- if (vector < IA64_FIRST_DEVICE_VECTOR || vector > IA64_LAST_DEVICE_VECTOR)
+ if (vector < IA64_FIRST_DEVICE_VECTOR ||
+ vector > IA64_LAST_DEVICE_VECTOR)
return;
-
- pos = vector - IA64_FIRST_DEVICE_VECTOR;
- if (!test_and_clear_bit(pos, ia64_vector_mask))
- printk(KERN_WARNING "%s: double free!\n", __FUNCTION__);
+ clear_irq_vector(vector);
}
int
reserve_irq_vector (int vector)
{
- int pos;
-
if (vector < IA64_FIRST_DEVICE_VECTOR ||
vector > IA64_LAST_DEVICE_VECTOR)
return -EINVAL;
+ return !!bind_irq_vector(vector, vector, CPU_MASK_ALL);
+}
- pos = vector - IA64_FIRST_DEVICE_VECTOR;
- return test_and_set_bit(pos, ia64_vector_mask);
+/*
+ * Initialize vector_irq on a new cpu. This function must be called
+ * with vector_lock held.
+ */
+void __setup_vector_irq(int cpu)
+{
+ int irq, vector;
+
+ /* Clear vector_irq */
+ for (vector = 0; vector < IA64_NUM_VECTORS; ++vector)
+ per_cpu(vector_irq, cpu)[vector] = IA64_SPURIOUS_INT_VECTOR;
+ /* Mark the inuse vectors */
+ for (irq = 0; irq < NR_IRQS; ++irq) {
+ if (!cpu_isset(cpu, irq_cfg[irq].domain))
+ continue;
+ vector = irq_to_vector(irq);
+ per_cpu(vector_irq, cpu)[vector] = irq;
+ }
+}
+
+#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+static enum vector_domain_type {
+ VECTOR_DOMAIN_NONE,
+ VECTOR_DOMAIN_PERCPU
+} vector_domain_type = VECTOR_DOMAIN_NONE;
+
+static cpumask_t vector_allocation_domain(int cpu)
+{
+ if (vector_domain_type == VECTOR_DOMAIN_PERCPU)
+ return cpumask_of_cpu(cpu);
+ return CPU_MASK_ALL;
+}
+
+static int __init parse_vector_domain(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+ if (!strcmp(arg, "percpu")) {
+ vector_domain_type = VECTOR_DOMAIN_PERCPU;
+ no_int_routing = 1;
+ }
+ return 1;
+}
+early_param("vector", parse_vector_domain);
+#else
+static cpumask_t vector_allocation_domain(int cpu)
+{
+ return CPU_MASK_ALL;
+}
+#endif
+
+
+void destroy_and_reserve_irq(unsigned int irq)
+{
+ dynamic_irq_cleanup(irq);
+
+ clear_irq_vector(irq);
+ reserve_irq(irq);
+}
+
+static int __reassign_irq_vector(int irq, int cpu)
+{
+ struct irq_cfg *cfg = &irq_cfg[irq];
+ int vector;
+ cpumask_t domain;
+
+ if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
+ return -EINVAL;
+ if (cpu_isset(cpu, cfg->domain))
+ return 0;
+ domain = vector_allocation_domain(cpu);
+ vector = find_unassigned_vector(domain);
+ if (vector < 0)
+ return -ENOSPC;
+ __clear_irq_vector(irq);
+ BUG_ON(__bind_irq_vector(irq, vector, domain));
+ return 0;
+}
+
+int reassign_irq_vector(int irq, int cpu)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ ret = __reassign_irq_vector(irq, cpu);
+ spin_unlock_irqrestore(&vector_lock, flags);
+ return ret;
}
/*
@@ -111,18 +342,35 @@
*/
int create_irq(void)
{
- int vector = assign_irq_vector(AUTO_ASSIGN);
+ unsigned long flags;
+ int irq, vector, cpu;
+ cpumask_t domain;
- if (vector >= 0)
- dynamic_irq_init(vector);
-
- return vector;
+ irq = vector = -ENOSPC;
+ spin_lock_irqsave(&vector_lock, flags);
+ for_each_online_cpu(cpu) {
+ domain = vector_allocation_domain(cpu);
+ vector = find_unassigned_vector(domain);
+ if (vector >= 0)
+ break;
+ }
+ if (vector < 0)
+ goto out;
+ irq = find_unassigned_irq();
+ if (irq < 0)
+ goto out;
+ BUG_ON(__bind_irq_vector(irq, vector, domain));
+ out:
+ spin_unlock_irqrestore(&vector_lock, flags);
+ if (irq >= 0)
+ dynamic_irq_init(irq);
+ return irq;
}
void destroy_irq(unsigned int irq)
{
dynamic_irq_cleanup(irq);
- free_irq_vector(irq);
+ clear_irq_vector(irq);
}
#ifdef CONFIG_SMP
@@ -301,14 +549,13 @@
irq_desc_t *desc;
unsigned int irq;
- for (irq = 0; irq < NR_IRQS; ++irq)
- if (irq_to_vector(irq) == vec) {
- desc = irq_desc + irq;
- desc->status |= IRQ_PER_CPU;
- desc->chip = &irq_type_ia64_lsapic;
- if (action)
- setup_irq(irq, action);
- }
+ irq = vec;
+ BUG_ON(bind_irq_vector(irq, vec, CPU_MASK_ALL));
+ desc = irq_desc + irq;
+ desc->status |= IRQ_PER_CPU;
+ desc->chip = &irq_type_ia64_lsapic;
+ if (action)
+ setup_irq(irq, action);
}
void __init
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index c81080d..2fdbd5c 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -13,6 +13,7 @@
#define MSI_DATA_VECTOR_SHIFT 0
#define MSI_DATA_VECTOR(v) (((u8)v) << MSI_DATA_VECTOR_SHIFT)
+#define MSI_DATA_VECTOR_MASK 0xffffff00
#define MSI_DATA_DELIVERY_SHIFT 8
#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_SHIFT)
@@ -50,17 +51,29 @@
static void ia64_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask)
{
struct msi_msg msg;
- u32 addr;
+ u32 addr, data;
+ int cpu = first_cpu(cpu_mask);
+
+ if (!cpu_online(cpu))
+ return;
+
+ if (reassign_irq_vector(irq, cpu))
+ return;
read_msi_msg(irq, &msg);
addr = msg.address_lo;
addr &= MSI_ADDR_DESTID_MASK;
- addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(first_cpu(cpu_mask)));
+ addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu));
msg.address_lo = addr;
+ data = msg.data;
+ data &= MSI_DATA_VECTOR_MASK;
+ data |= MSI_DATA_VECTOR(irq_to_vector(irq));
+ msg.data = data;
+
write_msi_msg(irq, &msg);
- irq_desc[irq].affinity = cpu_mask;
+ irq_desc[irq].affinity = cpumask_of_cpu(cpu);
}
#endif /* CONFIG_SMP */
@@ -69,13 +82,15 @@
struct msi_msg msg;
unsigned long dest_phys_id;
int irq, vector;
+ cpumask_t mask;
irq = create_irq();
if (irq < 0)
return irq;
set_irq_msi(irq, desc);
- dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map));
+ cpus_and(mask, irq_to_domain(irq), cpu_online_map);
+ dest_phys_id = cpu_physical_id(first_cpu(mask));
vector = irq_to_vector(irq);
msg.address_hi = 0;
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 3c9d8e6..9f5c90b 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -395,9 +395,13 @@
fix_b0_for_bsp();
lock_ipi_calllock();
+ spin_lock(&vector_lock);
+ /* Setup the per cpu irq handling data structures */
+ __setup_vector_irq(cpuid);
cpu_set(cpuid, cpu_online_map);
unlock_ipi_calllock();
per_cpu(cpu_state, cpuid) = CPU_ONLINE;
+ spin_unlock(&vector_lock);
smp_setup_percpu_timer();
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 3486fe7..627785c 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/efi.h>
#include <linux/timex.h>
+#include <linux/clocksource.h>
#include <asm/machvec.h>
#include <asm/delay.h>
@@ -28,6 +29,16 @@
#include <asm/sections.h>
#include <asm/system.h>
+#include "fsyscall_gtod_data.h"
+
+static cycle_t itc_get_cycles(void);
+
+struct fsyscall_gtod_data_t fsyscall_gtod_data = {
+ .lock = SEQLOCK_UNLOCKED,
+};
+
+struct itc_jitter_data_t itc_jitter_data;
+
volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */
#ifdef CONFIG_IA64_DEBUG_IRQ
@@ -37,11 +48,16 @@
#endif
-static struct time_interpolator itc_interpolator = {
- .shift = 16,
- .mask = 0xffffffffffffffffLL,
- .source = TIME_SOURCE_CPU
+static struct clocksource clocksource_itc = {
+ .name = "itc",
+ .rating = 350,
+ .read = itc_get_cycles,
+ .mask = 0xffffffffffffffff,
+ .mult = 0, /*to be caluclated*/
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static struct clocksource *itc_clocksource;
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
@@ -210,8 +226,6 @@
+ itc_freq/2)/itc_freq;
if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
- itc_interpolator.frequency = local_cpu_data->itc_freq;
- itc_interpolator.drift = itc_drift;
#ifdef CONFIG_SMP
/* On IA64 in an SMP configuration ITCs are never accurately synchronized.
* Jitter compensation requires a cmpxchg which may limit
@@ -223,15 +237,50 @@
* even going backward) if the ITC offsets between the individual CPUs
* are too large.
*/
- if (!nojitter) itc_interpolator.jitter = 1;
+ if (!nojitter)
+ itc_jitter_data.itc_jitter = 1;
#endif
- register_time_interpolator(&itc_interpolator);
}
/* Setup the CPU local timer tick */
ia64_cpu_local_tick();
+
+ if (!itc_clocksource) {
+ /* Sort out mult/shift values: */
+ clocksource_itc.mult =
+ clocksource_hz2mult(local_cpu_data->itc_freq,
+ clocksource_itc.shift);
+ clocksource_register(&clocksource_itc);
+ itc_clocksource = &clocksource_itc;
+ }
}
+static cycle_t itc_get_cycles()
+{
+ u64 lcycle, now, ret;
+
+ if (!itc_jitter_data.itc_jitter)
+ return get_cycles();
+
+ lcycle = itc_jitter_data.itc_lastcycle;
+ now = get_cycles();
+ if (lcycle && time_after(lcycle, now))
+ return lcycle;
+
+ /*
+ * Keep track of the last timer value returned.
+ * In an SMP environment, you could lose out in contention of
+ * cmpxchg. If so, your cmpxchg returns new value which the
+ * winner of contention updated to. Use the new value instead.
+ */
+ ret = cmpxchg(&itc_jitter_data.itc_lastcycle, lcycle, now);
+ if (unlikely(ret != lcycle))
+ return ret;
+
+ return now;
+}
+
+
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_IRQPOLL,
@@ -307,3 +356,34 @@
if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT))
ia64_printk_clock = ia64_itc_printk_clock;
}
+
+void update_vsyscall(struct timespec *wall, struct clocksource *c)
+{
+ unsigned long flags;
+
+ write_seqlock_irqsave(&fsyscall_gtod_data.lock, flags);
+
+ /* copy fsyscall clock data */
+ fsyscall_gtod_data.clk_mask = c->mask;
+ fsyscall_gtod_data.clk_mult = c->mult;
+ fsyscall_gtod_data.clk_shift = c->shift;
+ fsyscall_gtod_data.clk_fsys_mmio = c->fsys_mmio;
+ fsyscall_gtod_data.clk_cycle_last = c->cycle_last;
+
+ /* copy kernel time structures */
+ fsyscall_gtod_data.wall_time.tv_sec = wall->tv_sec;
+ fsyscall_gtod_data.wall_time.tv_nsec = wall->tv_nsec;
+ fsyscall_gtod_data.monotonic_time.tv_sec = wall_to_monotonic.tv_sec
+ + wall->tv_sec;
+ fsyscall_gtod_data.monotonic_time.tv_nsec = wall_to_monotonic.tv_nsec
+ + wall->tv_nsec;
+
+ /* normalize */
+ while (fsyscall_gtod_data.monotonic_time.tv_nsec >= NSEC_PER_SEC) {
+ fsyscall_gtod_data.monotonic_time.tv_nsec -= NSEC_PER_SEC;
+ fsyscall_gtod_data.monotonic_time.tv_sec++;
+ }
+
+ write_sequnlock_irqrestore(&fsyscall_gtod_data.lock, flags);
+}
+
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index 56a88b6..19e25d2 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -11,6 +11,7 @@
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/interrupt.h>
+#include <linux/clocksource.h>
#include <asm/hw_irq.h>
#include <asm/system.h>
@@ -22,11 +23,21 @@
extern unsigned long sn_rtc_cycles_per_second;
-static struct time_interpolator sn2_interpolator = {
- .drift = -1,
- .shift = 10,
- .mask = (1LL << 55) - 1,
- .source = TIME_SOURCE_MMIO64
+static void __iomem *sn2_mc;
+
+static cycle_t read_sn2(void)
+{
+ return (cycle_t)readq(sn2_mc);
+}
+
+static struct clocksource clocksource_sn2 = {
+ .name = "sn2_rtc",
+ .rating = 300,
+ .read = read_sn2,
+ .mask = (1LL << 55) - 1,
+ .mult = 0,
+ .shift = 10,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
@@ -47,9 +58,11 @@
void __init sn_timer_init(void)
{
- sn2_interpolator.frequency = sn_rtc_cycles_per_second;
- sn2_interpolator.addr = RTC_COUNTER_ADDR;
- register_time_interpolator(&sn2_interpolator);
+ sn2_mc = RTC_COUNTER_ADDR;
+ clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR;
+ clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
+ clocksource_sn2.shift);
+ clocksource_register(&clocksource_sn2);
ia64_udelay = &ia64_sn_udelay;
}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 5c863bc..1e3aecc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1190,8 +1190,19 @@
config SYS_HAS_CPU_SB1
bool
+#
+# CPU may reorder R->R, R->W, W->R, W->W
+# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
+#
config WEAK_ORDERING
bool
+
+#
+# CPU may reorder reads and writes beyond LL/SC
+# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC
+#
+config WEAK_REORDERING_BEYOND_LLSC
+ bool
endmenu
#
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c6b8b07..06448a9 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -75,6 +75,27 @@
local_irq_enable();
}
+/*
+ * The RM7000 variant has to handle erratum 38. The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(
+ " .set push \n"
+ " .set mips3 \n"
+ " .set noat \n"
+ " mfc0 $1, $12 \n"
+ " sync \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " wait \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " .set pop \n");
+ local_irq_enable();
+}
+
/* The Au1xxx wait is available only if using 32khz counter or
* external timer source, but specifically not CP0 Counter. */
int allow_au1k_wait;
@@ -132,7 +153,6 @@
case CPU_R4700:
case CPU_R5000:
case CPU_NEVADA:
- case CPU_RM7000:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
@@ -142,6 +162,10 @@
cpu_wait = r4k_wait;
break;
+ case CPU_RM7000:
+ cpu_wait = rm7k_wait_irqoff;
+ break;
+
case CPU_24K:
case CPU_34K:
cpu_wait = r4k_wait;
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 8f4cf27c..bd05f5a 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -25,7 +25,9 @@
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/kallsyms.h>
+#include <linux/random.h>
+#include <asm/asm.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/dsp.h>
@@ -460,3 +462,15 @@
out:
return pc;
}
+
+/*
+ * Don't forget that the stack pointer must be aligned on a 8 bytes
+ * boundary for 32-bits ABI and 16 bytes for 64-bits ABI.
+ */
+unsigned long arch_align_stack(unsigned long sp)
+{
+ if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+ sp -= get_random_int() & ~PAGE_MASK;
+
+ return sp & ALMASK;
+}
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 80ffc78..bb5d23b 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -475,7 +475,7 @@
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-#ifdef CONFIG_GENERIC_TIME
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC halts in C2, so notify users */
mark_tsc_unstable("possible TSC halt in C2");
#endif
@@ -517,7 +517,7 @@
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
}
-#ifdef CONFIG_GENERIC_TIME
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC halts in C3, so notify users */
mark_tsc_unstable("TSC halts in C3");
#endif
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 0be700f..ba0e74a 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -29,6 +29,7 @@
#include <linux/bcd.h>
#include <linux/seq_file.h>
#include <linux/bitops.h>
+#include <linux/clocksource.h>
#include <asm/current.h>
#include <asm/uaccess.h>
@@ -51,8 +52,34 @@
#define HPET_RANGE_SIZE 1024 /* from HPET spec */
+#if BITS_PER_LONG == 64
+#define write_counter(V, MC) writeq(V, MC)
+#define read_counter(MC) readq(MC)
+#else
+#define write_counter(V, MC) writel(V, MC)
+#define read_counter(MC) readl(MC)
+#endif
+
static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ;
+static void __iomem *hpet_mctr;
+
+static cycle_t read_hpet(void)
+{
+ return (cycle_t)read_counter((void __iomem *)hpet_mctr);
+}
+
+static struct clocksource clocksource_hpet = {
+ .name = "hpet",
+ .rating = 250,
+ .read = read_hpet,
+ .mask = 0xffffffffffffffff,
+ .mult = 0, /*to be caluclated*/
+ .shift = 10,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+static struct clocksource *hpet_clocksource;
+
/* A lock for concurrent access by app and isr hpet activity. */
static DEFINE_SPINLOCK(hpet_lock);
/* A lock for concurrent intermodule access to hpet and isr hpet activity. */
@@ -79,7 +106,7 @@
struct hpets *hp_next;
struct hpet __iomem *hp_hpet;
unsigned long hp_hpet_phys;
- struct time_interpolator *hp_interpolator;
+ struct clocksource *hp_clocksource;
unsigned long long hp_tick_freq;
unsigned long hp_delta;
unsigned int hp_ntimer;
@@ -94,13 +121,6 @@
#define HPET_PERIODIC 0x0004
#define HPET_SHARED_IRQ 0x0008
-#if BITS_PER_LONG == 64
-#define write_counter(V, MC) writeq(V, MC)
-#define read_counter(MC) readq(MC)
-#else
-#define write_counter(V, MC) writel(V, MC)
-#define read_counter(MC) readl(MC)
-#endif
#ifndef readq
static inline unsigned long long readq(void __iomem *addr)
@@ -737,27 +757,6 @@
static struct ctl_table_header *sysctl_header;
-static void hpet_register_interpolator(struct hpets *hpetp)
-{
-#ifdef CONFIG_TIME_INTERPOLATION
- struct time_interpolator *ti;
-
- ti = kzalloc(sizeof(*ti), GFP_KERNEL);
- if (!ti)
- return;
-
- ti->source = TIME_SOURCE_MMIO64;
- ti->shift = 10;
- ti->addr = &hpetp->hp_hpet->hpet_mc;
- ti->frequency = hpetp->hp_tick_freq;
- ti->drift = HPET_DRIFT;
- ti->mask = -1;
-
- hpetp->hp_interpolator = ti;
- register_time_interpolator(ti);
-#endif
-}
-
/*
* Adjustment for when arming the timer with
* initial conditions. That is, main counter
@@ -909,7 +908,16 @@
}
hpetp->hp_delta = hpet_calibrate(hpetp);
- hpet_register_interpolator(hpetp);
+
+ if (!hpet_clocksource) {
+ hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc;
+ CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr);
+ clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq,
+ clocksource_hpet.shift);
+ clocksource_register(&clocksource_hpet);
+ hpetp->hp_clocksource = &clocksource_hpet;
+ hpet_clocksource = &clocksource_hpet;
+ }
return 0;
}
@@ -995,7 +1003,7 @@
static int hpet_acpi_remove(struct acpi_device *device, int type)
{
- /* XXX need to unregister interpolator, dealloc mem, etc */
+ /* XXX need to unregister clocksource, dealloc mem, etc */
return -EINVAL;
}
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 4b26ce4..8677fc6 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -465,7 +465,7 @@
return -ENOMEM;
if ((err = read_log(log)))
- return err;
+ goto out_free;
/* now register seq file */
err = seq_open(file, &tpm_binary_b_measurments_seqops);
@@ -473,10 +473,15 @@
seq = file->private_data;
seq->private = log;
} else {
- kfree(log->bios_event_log);
- kfree(log);
+ goto out_free;
}
+
+out:
return err;
+out_free:
+ kfree(log->bios_event_log);
+ kfree(log);
+ goto out;
}
const struct file_operations tpm_binary_bios_measurements_ops = {
diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h
index c054d7a..efa1b8f 100644
--- a/include/asm-ia64/hw_irq.h
+++ b/include/asm-ia64/hw_irq.h
@@ -90,13 +90,27 @@
extern __u8 isa_irq_to_vector_map[16];
#define isa_irq_to_vector(x) isa_irq_to_vector_map[(x)]
+struct irq_cfg {
+ ia64_vector vector;
+ cpumask_t domain;
+};
+extern spinlock_t vector_lock;
+extern struct irq_cfg irq_cfg[NR_IRQS];
+#define irq_to_domain(x) irq_cfg[(x)].domain
+DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
+
extern struct hw_interrupt_type irq_type_ia64_lsapic; /* CPU-internal interrupt controller */
+extern int bind_irq_vector(int irq, int vector, cpumask_t domain);
extern int assign_irq_vector (int irq); /* allocate a free vector */
extern void free_irq_vector (int vector);
extern int reserve_irq_vector (int vector);
+extern void __setup_vector_irq(int cpu);
+extern int reassign_irq_vector(int irq, int cpu);
extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
+extern int check_irq_used (int irq);
+extern void destroy_and_reserve_irq (unsigned int irq);
static inline void ia64_resend_irq(unsigned int vector)
{
@@ -113,7 +127,7 @@
static inline unsigned int
__ia64_local_vector_to_irq (ia64_vector vec)
{
- return (unsigned int) vec;
+ return __get_cpu_var(vector_irq)[vec];
}
#endif
@@ -131,7 +145,7 @@
static inline ia64_vector
irq_to_vector (int irq)
{
- return (ia64_vector) irq;
+ return irq_cfg[irq].vector;
}
/*
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
index 421cb6b..b8f7128 100644
--- a/include/asm-ia64/iosapic.h
+++ b/include/asm-ia64/iosapic.h
@@ -47,19 +47,21 @@
#define IOSAPIC_MASK_SHIFT 16
#define IOSAPIC_MASK (1<<IOSAPIC_MASK_SHIFT)
+#define IOSAPIC_VECTOR_MASK 0xffffff00
+
#ifndef __ASSEMBLY__
#ifdef CONFIG_IOSAPIC
#define NR_IOSAPICS 256
-static inline unsigned int iosapic_read(char __iomem *iosapic, unsigned int reg)
+static inline unsigned int __iosapic_read(char __iomem *iosapic, unsigned int reg)
{
writel(reg, iosapic + IOSAPIC_REG_SELECT);
return readl(iosapic + IOSAPIC_WINDOW);
}
-static inline void iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+static inline void __iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
{
writel(reg, iosapic + IOSAPIC_REG_SELECT);
writel(val, iosapic + IOSAPIC_WINDOW);
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
index 6722161..35b360b 100644
--- a/include/asm-ia64/irq.h
+++ b/include/asm-ia64/irq.h
@@ -14,8 +14,13 @@
#include <linux/types.h>
#include <linux/cpumask.h>
-#define NR_IRQS 256
-#define NR_IRQ_VECTORS NR_IRQS
+#define NR_VECTORS 256
+
+#if (NR_VECTORS + 32 * NR_CPUS) < 1024
+#define NR_IRQS (NR_VECTORS + 32 * NR_CPUS)
+#else
+#define NR_IRQS 1024
+#endif
static __inline__ int
irq_canonicalize (int irq)
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
index 2d1640c..8aba06a 100644
--- a/include/asm-ia64/rwsem.h
+++ b/include/asm-ia64/rwsem.h
@@ -21,6 +21,10 @@
#ifndef _ASM_IA64_RWSEM_H
#define _ASM_IA64_RWSEM_H
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
#include <linux/list.h>
#include <linux/spinlock.h>
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index 441c9e0..315f8de 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -292,7 +292,7 @@
#define __NR_sync_file_range 1300
#define __NR_tee 1301
#define __NR_vmsplice 1302
-/* 1303 reserved for move_pages */
+#define __NR_fallocate 1303
#define __NR_getcpu 1304
#define __NR_epoll_pwait 1305
#define __NR_utimensat 1306
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index 1b60624..7d80037 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -138,7 +138,7 @@
{
unsigned long result;
- smp_mb();
+ smp_llsc_mb();
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long temp;
@@ -181,7 +181,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return result;
}
@@ -190,7 +190,7 @@
{
unsigned long result;
- smp_mb();
+ smp_llsc_mb();
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long temp;
@@ -233,7 +233,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return result;
}
@@ -250,7 +250,7 @@
{
unsigned long result;
- smp_mb();
+ smp_llsc_mb();
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long temp;
@@ -302,7 +302,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return result;
}
@@ -519,7 +519,7 @@
{
unsigned long result;
- smp_mb();
+ smp_llsc_mb();
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long temp;
@@ -562,7 +562,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return result;
}
@@ -571,7 +571,7 @@
{
unsigned long result;
- smp_mb();
+ smp_llsc_mb();
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long temp;
@@ -614,7 +614,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return result;
}
@@ -631,7 +631,7 @@
{
unsigned long result;
- smp_mb();
+ smp_llsc_mb();
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long temp;
@@ -683,7 +683,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return result;
}
@@ -791,10 +791,11 @@
* atomic*_return operations are serializing but not the non-*_return
* versions.
*/
-#define smp_mb__before_atomic_dec() smp_mb()
-#define smp_mb__after_atomic_dec() smp_mb()
-#define smp_mb__before_atomic_inc() smp_mb()
-#define smp_mb__after_atomic_inc() smp_mb()
+#define smp_mb__before_atomic_dec() smp_llsc_mb()
+#define smp_mb__after_atomic_dec() smp_llsc_mb()
+#define smp_mb__before_atomic_inc() smp_llsc_mb()
+#define smp_mb__after_atomic_inc() smp_llsc_mb()
#include <asm-generic/atomic.h>
+
#endif /* _ASM_ATOMIC_H */
diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h
index ed82631..9d8cfbb 100644
--- a/include/asm-mips/barrier.h
+++ b/include/asm-mips/barrier.h
@@ -121,6 +121,11 @@
#else
#define __WEAK_ORDERING_MB " \n"
#endif
+#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
+#define __WEAK_LLSC_MB " sync \n"
+#else
+#define __WEAK_LLSC_MB " \n"
+#endif
#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
@@ -129,4 +134,8 @@
#define set_mb(var, value) \
do { var = value; smp_mb(); } while (0)
+#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
#endif /* __ASM_BARRIER_H */
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index d9e81af..148bc79 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -38,8 +38,8 @@
/*
* clear_bit() doesn't provide any barrier for the compiler.
*/
-#define smp_mb__before_clear_bit() smp_mb()
-#define smp_mb__after_clear_bit() smp_mb()
+#define smp_mb__before_clear_bit() smp_llsc_mb()
+#define smp_mb__after_clear_bit() smp_llsc_mb()
/*
* set_bit - Atomically set a bit in memory
@@ -289,7 +289,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return res != 0;
}
@@ -377,7 +377,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return res != 0;
}
@@ -445,7 +445,7 @@
raw_local_irq_restore(flags);
}
- smp_mb();
+ smp_llsc_mb();
return res != 0;
}
diff --git a/include/asm-mips/ds1216.h b/include/asm-mips/ds1216.h
deleted file mode 100644
index 1ff8b73..0000000
--- a/include/asm-mips/ds1216.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _DS1216_H
-#define _DS1216_H
-
-extern volatile unsigned char *ds1216_base;
-unsigned long ds1216_get_cmos_time(void);
-int ds1216_set_rtc_mmss(unsigned long nowtime);
-
-#define DS1216_SEC_BYTE 1
-#define DS1216_MIN_BYTE 2
-#define DS1216_HOUR_BYTE 3
-#define DS1216_HOUR_MASK (0x1f)
-#define DS1216_AMPM_MASK (1<<5)
-#define DS1216_1224_MASK (1<<7)
-#define DS1216_DAY_BYTE 4
-#define DS1216_DAY_MASK (0x7)
-#define DS1216_DATE_BYTE 5
-#define DS1216_DATE_MASK (0x3f)
-#define DS1216_MONTH_BYTE 6
-#define DS1216_MONTH_MASK (0x1f)
-#define DS1216_YEAR_BYTE 7
-
-#define DS1216_SEC(buf) (buf[DS1216_SEC_BYTE])
-#define DS1216_MIN(buf) (buf[DS1216_MIN_BYTE])
-#define DS1216_HOUR(buf) (buf[DS1216_HOUR_BYTE] & DS1216_HOUR_MASK)
-#define DS1216_AMPM(buf) (buf[DS1216_HOUR_BYTE] & DS1216_AMPM_MASK)
-#define DS1216_1224(buf) (buf[DS1216_HOUR_BYTE] & DS1216_1224_MASK)
-#define DS1216_DATE(buf) (buf[DS1216_DATE_BYTE] & DS1216_DATE_MASK)
-#define DS1216_MONTH(buf) (buf[DS1216_MONTH_BYTE] & DS1216_MONTH_MASK)
-#define DS1216_YEAR(buf) (buf[DS1216_YEAR_BYTE])
-
-#endif
diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h
index 47e5679..b623882 100644
--- a/include/asm-mips/futex.h
+++ b/include/asm-mips/futex.h
@@ -29,7 +29,7 @@
" .set mips3 \n" \
"2: sc $1, %2 \n" \
" beqzl $1, 1b \n" \
- __WEAK_ORDERING_MB \
+ __WEAK_LLSC_MB \
"3: \n" \
" .set pop \n" \
" .set mips0 \n" \
@@ -55,7 +55,7 @@
" .set mips3 \n" \
"2: sc $1, %2 \n" \
" beqz $1, 1b \n" \
- __WEAK_ORDERING_MB \
+ __WEAK_LLSC_MB \
"3: \n" \
" .set pop \n" \
" .set mips0 \n" \
@@ -152,7 +152,7 @@
" .set mips3 \n"
"2: sc $1, %1 \n"
" beqzl $1, 1b \n"
- __WEAK_ORDERING_MB
+ __WEAK_LLSC_MB
"3: \n"
" .set pop \n"
" .section .fixup,\"ax\" \n"
@@ -179,7 +179,7 @@
" .set mips3 \n"
"2: sc $1, %1 \n"
" beqz $1, 1b \n"
- __WEAK_ORDERING_MB
+ __WEAK_LLSC_MB
"3: \n"
" .set pop \n"
" .section .fixup,\"ax\" \n"
diff --git a/include/asm-mips/gfx.h b/include/asm-mips/gfx.h
deleted file mode 100644
index 37235e4..0000000
--- a/include/asm-mips/gfx.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This is the user-visible SGI GFX interface.
- *
- * This must be used verbatim into the GNU libc. It does not include
- * any kernel-only bits on it.
- *
- * miguel@nuclecu.unam.mx
- */
-#ifndef _ASM_GFX_H
-#define _ASM_GFX_H
-
-/* The iocls, yes, they do not make sense, but such is life */
-#define GFX_BASE 100
-#define GFX_GETNUM_BOARDS (GFX_BASE + 1)
-#define GFX_GETBOARD_INFO (GFX_BASE + 2)
-#define GFX_ATTACH_BOARD (GFX_BASE + 3)
-#define GFX_DETACH_BOARD (GFX_BASE + 4)
-#define GFX_IS_MANAGED (GFX_BASE + 5)
-
-#define GFX_MAPALL (GFX_BASE + 10)
-#define GFX_LABEL (GFX_BASE + 11)
-
-#define GFX_INFO_NAME_SIZE 16
-#define GFX_INFO_LABEL_SIZE 16
-
-struct gfx_info {
- char name [GFX_INFO_NAME_SIZE]; /* board name */
- char label [GFX_INFO_LABEL_SIZE]; /* label name */
- unsigned short int xpmax, ypmax; /* screen resolution */
- unsigned int lenght; /* size of a complete gfx_info for this board */
-};
-
-struct gfx_getboardinfo_args {
- unsigned int board; /* board number. starting from zero */
- void *buf; /* pointer to gfx_info */
- unsigned int len; /* buffer size of buf */
-};
-
-struct gfx_attach_board_args {
- unsigned int board; /* board number, starting from zero */
- void *vaddr; /* address where the board registers should be mapped */
-};
-
-#ifdef __KERNEL__
-/* umap.c */
-extern void remove_mapping (struct vm_area_struct *vma, struct task_struct *, unsigned long, unsigned long);
-extern void *vmalloc_uncached (unsigned long size);
-extern int vmap_page_range (struct vm_area_struct *vma, unsigned long from, unsigned long size, unsigned long vaddr);
-#endif
-
-#endif /* _ASM_GFX_H */
diff --git a/include/asm-mips/mach-cobalt/cpu-feature-overrides.h b/include/asm-mips/mach-cobalt/cpu-feature-overrides.h
index c6dfa59d..d38f069 100644
--- a/include/asm-mips/mach-cobalt/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-cobalt/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
@@ -46,6 +46,8 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
diff --git a/include/asm-mips/mach-excite/cpu-feature-overrides.h b/include/asm-mips/mach-excite/cpu-feature-overrides.h
index 0d31854..07f4322 100644
--- a/include/asm-mips/mach-excite/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-excite/cpu-feature-overrides.h
@@ -4,6 +4,7 @@
* for more details.
*
* Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
@@ -27,6 +28,8 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-ip22/cpu-feature-overrides.h b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
index f7c5dc8..9c87351 100644
--- a/include/asm-mips/mach-ip22/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 Ralf Baechle
+ * Copyright (C) 2003, 07 Ralf Baechle
*/
#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
@@ -30,6 +30,8 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-ip27/cpu-feature-overrides.h b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
index a071974..fe07638 100644
--- a/include/asm-mips/mach-ip27/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 Ralf Baechle
+ * Copyright (C) 2003, 07 Ralf Baechle
*/
#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
@@ -27,6 +27,8 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
index 2a3de09..6782fcc 100644
--- a/include/asm-mips/mach-ip32/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
@@ -4,7 +4,7 @@
* for more details.
*
* Copyright (C) 2005 Ilya A. Volynets-Evenbakh
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
@@ -38,6 +38,8 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
#define cpu_has_4k_cache 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_mips32r1 0
diff --git a/include/asm-mips/mach-qemu/cpu-feature-overrides.h b/include/asm-mips/mach-qemu/cpu-feature-overrides.h
index 529445d..d2daaed 100644
--- a/include/asm-mips/mach-qemu/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-qemu/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 Ralf Baechle
+ * Copyright (C) 2003, 07 Ralf Baechle
*/
#ifndef __ASM_MACH_QEMU_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_QEMU_CPU_FEATURE_OVERRIDES_H
@@ -24,6 +24,7 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 0
diff --git a/include/asm-mips/mach-rm/cpu-feature-overrides.h b/include/asm-mips/mach-rm/cpu-feature-overrides.h
index 7e07283..ccf5433 100644
--- a/include/asm-mips/mach-rm/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-rm/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
*
* SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors.
*/
@@ -32,6 +32,8 @@
#define cpu_has_dsp 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
diff --git a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
index a25968f..63d5bf6 100644
--- a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
@@ -26,6 +26,8 @@
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
diff --git a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
index 42cebb7..470e5e9 100644
--- a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
@@ -26,6 +26,8 @@
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h
index 35e431c..bb89701 100644
--- a/include/asm-mips/spinlock.h
+++ b/include/asm-mips/spinlock.h
@@ -67,7 +67,7 @@
: "memory");
}
- smp_mb();
+ smp_llsc_mb();
}
static inline void __raw_spin_unlock(raw_spinlock_t *lock)
@@ -118,7 +118,7 @@
: "memory");
}
- smp_mb();
+ smp_llsc_mb();
return res == 0;
}
@@ -183,7 +183,7 @@
: "memory");
}
- smp_mb();
+ smp_llsc_mb();
}
/* Note the use of sub, not subu which will make the kernel die with an
@@ -193,7 +193,7 @@
{
unsigned int tmp;
- smp_mb();
+ smp_llsc_mb();
if (R10000_LLSC_WAR) {
__asm__ __volatile__(
@@ -262,7 +262,7 @@
: "memory");
}
- smp_mb();
+ smp_llsc_mb();
}
static inline void __raw_write_unlock(raw_rwlock_t *rw)
@@ -293,7 +293,7 @@
" .set reorder \n"
" beqzl %1, 1b \n"
" nop \n"
- __WEAK_ORDERING_MB
+ __WEAK_LLSC_MB
" li %2, 1 \n"
"2: \n"
: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
@@ -310,7 +310,7 @@
" beqz %1, 1b \n"
" nop \n"
" .set reorder \n"
- __WEAK_ORDERING_MB
+ __WEAK_LLSC_MB
" li %2, 1 \n"
"2: \n"
: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
@@ -336,7 +336,7 @@
" sc %1, %0 \n"
" beqzl %1, 1b \n"
" nop \n"
- __WEAK_ORDERING_MB
+ __WEAK_LLSC_MB
" li %2, 1 \n"
" .set reorder \n"
"2: \n"
@@ -354,7 +354,7 @@
" beqz %1, 3f \n"
" li %2, 1 \n"
"2: \n"
- __WEAK_ORDERING_MB
+ __WEAK_LLSC_MB
" .subsection 2 \n"
"3: b 1b \n"
" li %2, 0 \n"
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 7633916..8d0b1cd 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -117,7 +117,7 @@
raw_local_irq_restore(flags); /* implies memory barrier */
}
- smp_mb();
+ smp_llsc_mb();
return retval;
}
@@ -165,7 +165,7 @@
raw_local_irq_restore(flags); /* implies memory barrier */
}
- smp_mb();
+ smp_llsc_mb();
return retval;
}
@@ -246,7 +246,7 @@
raw_local_irq_restore(flags); /* implies memory barrier */
}
- smp_mb();
+ smp_llsc_mb();
return retval;
}
@@ -352,7 +352,7 @@
raw_local_irq_restore(flags); /* implies memory barrier */
}
- smp_mb();
+ smp_llsc_mb();
return retval;
}
@@ -470,6 +470,6 @@
*/
#define __ARCH_WANT_UNLOCKED_CTXSW
-#define arch_align_stack(x) (x)
+extern unsigned long arch_align_stack(unsigned long sp);
#endif /* _ASM_SYSTEM_H */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index bf297b0..16ea337 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -67,6 +67,12 @@
unsigned long flags;
cycle_t (*vread)(void);
void (*resume)(void);
+#ifdef CONFIG_IA64
+ void *fsys_mmio; /* used by fsyscall asm code */
+#define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr))
+#else
+#define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0)
+#endif
/* timekeeping specific data, ignore */
cycle_t cycle_interval;
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 7d0ecc1..d859354 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -40,7 +40,7 @@
*/
#define ZERO_SIZE_PTR ((void *)16)
-#define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) < \
+#define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) <= \
(unsigned long)ZERO_SIZE_PTR)
/*
diff --git a/include/linux/timex.h b/include/linux/timex.h
index da929db..37ac3ff 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -224,66 +224,6 @@
__x < 0 ? -(-__x >> __s) : __x >> __s; \
})
-
-#ifdef CONFIG_TIME_INTERPOLATION
-
-#define TIME_SOURCE_CPU 0
-#define TIME_SOURCE_MMIO64 1
-#define TIME_SOURCE_MMIO32 2
-#define TIME_SOURCE_FUNCTION 3
-
-/* For proper operations time_interpolator clocks must run slightly slower
- * than the standard clock since the interpolator may only correct by having
- * time jump forward during a tick. A slower clock is usually a side effect
- * of the integer divide of the nanoseconds in a second by the frequency.
- * The accuracy of the division can be increased by specifying a shift.
- * However, this may cause the clock not to be slow enough.
- * The interpolator will self-tune the clock by slowing down if no
- * resets occur or speeding up if the time jumps per analysis cycle
- * become too high.
- *
- * Setting jitter compensates for a fluctuating timesource by comparing
- * to the last value read from the timesource to insure that an earlier value
- * is not returned by a later call. The price to pay
- * for the compensation is that the timer routines are not as scalable anymore.
- */
-
-struct time_interpolator {
- u16 source; /* time source flags */
- u8 shift; /* increases accuracy of multiply by shifting. */
- /* Note that bits may be lost if shift is set too high */
- u8 jitter; /* if set compensate for fluctuations */
- u32 nsec_per_cyc; /* set by register_time_interpolator() */
- void *addr; /* address of counter or function */
- cycles_t mask; /* mask the valid bits of the counter */
- unsigned long offset; /* nsec offset at last update of interpolator */
- u64 last_counter; /* counter value in units of the counter at last update */
- cycles_t last_cycle; /* Last timer value if TIME_SOURCE_JITTER is set */
- u64 frequency; /* frequency in counts/second */
- long drift; /* drift in parts-per-million (or -1) */
- unsigned long skips; /* skips forward */
- unsigned long ns_skipped; /* nanoseconds skipped */
- struct time_interpolator *next;
-};
-
-extern void register_time_interpolator(struct time_interpolator *);
-extern void unregister_time_interpolator(struct time_interpolator *);
-extern void time_interpolator_reset(void);
-extern unsigned long time_interpolator_get_offset(void);
-extern void time_interpolator_update(long delta_nsec);
-
-#else /* !CONFIG_TIME_INTERPOLATION */
-
-static inline void time_interpolator_reset(void)
-{
-}
-
-static inline void time_interpolator_update(long delta_nsec)
-{
-}
-
-#endif /* !CONFIG_TIME_INTERPOLATION */
-
#define TICK_LENGTH_SHIFT 32
#ifdef CONFIG_NO_HZ
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 2565e1b..d0e5c48 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -65,8 +65,8 @@
/*
* Make /sys/kernel/notes give the raw contents of our kernel .notes section.
*/
-extern const char __start_notes __attribute__((weak));
-extern const char __stop_notes __attribute__((weak));
+extern const void __start_notes __attribute__((weak));
+extern const void __stop_notes __attribute__((weak));
#define notes_size (&__stop_notes - &__start_notes)
static ssize_t notes_read(struct kobject *kobj, struct bin_attribute *bin_attr,
diff --git a/kernel/time.c b/kernel/time.c
index ffe1914..5b81da0 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -57,17 +57,14 @@
*/
asmlinkage long sys_time(time_t __user * tloc)
{
- /*
- * We read xtime.tv_sec atomically - it's updated
- * atomically by update_wall_time(), so no need to
- * even read-lock the xtime seqlock:
- */
- time_t i = xtime.tv_sec;
+ time_t i;
+ struct timespec tv;
- smp_rmb(); /* sys_time() results are coherent */
+ getnstimeofday(&tv);
+ i = tv.tv_sec;
if (tloc) {
- if (put_user(i, tloc))
+ if (put_user(i,tloc))
i = -EFAULT;
}
return i;
@@ -136,7 +133,6 @@
write_seqlock_irq(&xtime_lock);
wall_to_monotonic.tv_sec -= sys_tz.tz_minuteswest * 60;
xtime.tv_sec += sys_tz.tz_minuteswest * 60;
- time_interpolator_reset();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
}
@@ -309,92 +305,6 @@
}
EXPORT_SYMBOL(timespec_trunc);
-#ifdef CONFIG_TIME_INTERPOLATION
-void getnstimeofday (struct timespec *tv)
-{
- unsigned long seq,sec,nsec;
-
- do {
- seq = read_seqbegin(&xtime_lock);
- sec = xtime.tv_sec;
- nsec = xtime.tv_nsec+time_interpolator_get_offset();
- } while (unlikely(read_seqretry(&xtime_lock, seq)));
-
- while (unlikely(nsec >= NSEC_PER_SEC)) {
- nsec -= NSEC_PER_SEC;
- ++sec;
- }
- tv->tv_sec = sec;
- tv->tv_nsec = nsec;
-}
-EXPORT_SYMBOL_GPL(getnstimeofday);
-
-int do_settimeofday (struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- {
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
- time_interpolator_reset();
- }
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-
-void do_gettimeofday (struct timeval *tv)
-{
- unsigned long seq, nsec, usec, sec, offset;
- do {
- seq = read_seqbegin(&xtime_lock);
- offset = time_interpolator_get_offset();
- sec = xtime.tv_sec;
- nsec = xtime.tv_nsec;
- } while (unlikely(read_seqretry(&xtime_lock, seq)));
-
- usec = (nsec + offset) / 1000;
-
- while (unlikely(usec >= USEC_PER_SEC)) {
- usec -= USEC_PER_SEC;
- ++sec;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-
- /*
- * Make sure xtime.tv_sec [returned by sys_time()] always
- * follows the gettimeofday() result precisely. This
- * condition is extremely unlikely, it can hit at most
- * once per second:
- */
- if (unlikely(xtime.tv_sec != tv->tv_sec)) {
- unsigned long flags;
-
- write_seqlock_irqsave(&xtime_lock, flags);
- update_wall_time();
- write_sequnlock_irqrestore(&xtime_lock, flags);
- }
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-#else /* CONFIG_TIME_INTERPOLATION */
-
#ifndef CONFIG_GENERIC_TIME
/*
* Simulate gettimeofday using do_gettimeofday which only allows a timeval
@@ -410,7 +320,6 @@
}
EXPORT_SYMBOL_GPL(getnstimeofday);
#endif
-#endif /* CONFIG_TIME_INTERPOLATION */
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
* Assumes input in normal date format, i.e. 1980-12-31 23:59:59
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 438c6b7..b5e3525 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -116,11 +116,6 @@
if (xtime.tv_sec % 86400 == 0) {
xtime.tv_sec--;
wall_to_monotonic.tv_sec++;
- /*
- * The timer interpolator will make time change
- * gradually instead of an immediate jump by one second
- */
- time_interpolator_update(-NSEC_PER_SEC);
time_state = TIME_OOP;
printk(KERN_NOTICE "Clock: inserting leap second "
"23:59:60 UTC\n");
@@ -130,11 +125,6 @@
if ((xtime.tv_sec + 1) % 86400 == 0) {
xtime.tv_sec++;
wall_to_monotonic.tv_sec--;
- /*
- * Use of time interpolator for a gradual change of
- * time
- */
- time_interpolator_update(NSEC_PER_SEC);
time_state = TIME_WAIT;
printk(KERN_NOTICE "Clock: deleting leap second "
"23:59:59 UTC\n");
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8969877..88c8102 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -466,10 +466,6 @@
second_overflow();
}
- /* interpolator bits */
- time_interpolator_update(clock->xtime_interval
- >> clock->shift);
-
/* accumulate error between NTP and clock interval */
clock->error += current_tick_length();
clock->error -= clock->xtime_interval << (TICK_LENGTH_SHIFT - clock->shift);
diff --git a/kernel/timer.c b/kernel/timer.c
index d1e8b97..6ce1952 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1349,194 +1349,6 @@
open_softirq(TIMER_SOFTIRQ, run_timer_softirq, NULL);
}
-#ifdef CONFIG_TIME_INTERPOLATION
-
-struct time_interpolator *time_interpolator __read_mostly;
-static struct time_interpolator *time_interpolator_list __read_mostly;
-static DEFINE_SPINLOCK(time_interpolator_lock);
-
-static inline cycles_t time_interpolator_get_cycles(unsigned int src)
-{
- unsigned long (*x)(void);
-
- switch (src)
- {
- case TIME_SOURCE_FUNCTION:
- x = time_interpolator->addr;
- return x();
-
- case TIME_SOURCE_MMIO64 :
- return readq_relaxed((void __iomem *)time_interpolator->addr);
-
- case TIME_SOURCE_MMIO32 :
- return readl_relaxed((void __iomem *)time_interpolator->addr);
-
- default: return get_cycles();
- }
-}
-
-static inline u64 time_interpolator_get_counter(int writelock)
-{
- unsigned int src = time_interpolator->source;
-
- if (time_interpolator->jitter)
- {
- cycles_t lcycle;
- cycles_t now;
-
- do {
- lcycle = time_interpolator->last_cycle;
- now = time_interpolator_get_cycles(src);
- if (lcycle && time_after(lcycle, now))
- return lcycle;
-
- /* When holding the xtime write lock, there's no need
- * to add the overhead of the cmpxchg. Readers are
- * force to retry until the write lock is released.
- */
- if (writelock) {
- time_interpolator->last_cycle = now;
- return now;
- }
- /* Keep track of the last timer value returned. The use of cmpxchg here
- * will cause contention in an SMP environment.
- */
- } while (unlikely(cmpxchg(&time_interpolator->last_cycle, lcycle, now) != lcycle));
- return now;
- }
- else
- return time_interpolator_get_cycles(src);
-}
-
-void time_interpolator_reset(void)
-{
- time_interpolator->offset = 0;
- time_interpolator->last_counter = time_interpolator_get_counter(1);
-}
-
-#define GET_TI_NSECS(count,i) (((((count) - i->last_counter) & (i)->mask) * (i)->nsec_per_cyc) >> (i)->shift)
-
-unsigned long time_interpolator_get_offset(void)
-{
- /* If we do not have a time interpolator set up then just return zero */
- if (!time_interpolator)
- return 0;
-
- return time_interpolator->offset +
- GET_TI_NSECS(time_interpolator_get_counter(0), time_interpolator);
-}
-
-#define INTERPOLATOR_ADJUST 65536
-#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
-
-void time_interpolator_update(long delta_nsec)
-{
- u64 counter;
- unsigned long offset;
-
- /* If there is no time interpolator set up then do nothing */
- if (!time_interpolator)
- return;
-
- /*
- * The interpolator compensates for late ticks by accumulating the late
- * time in time_interpolator->offset. A tick earlier than expected will
- * lead to a reset of the offset and a corresponding jump of the clock
- * forward. Again this only works if the interpolator clock is running
- * slightly slower than the regular clock and the tuning logic insures
- * that.
- */
-
- counter = time_interpolator_get_counter(1);
- offset = time_interpolator->offset +
- GET_TI_NSECS(counter, time_interpolator);
-
- if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
- time_interpolator->offset = offset - delta_nsec;
- else {
- time_interpolator->skips++;
- time_interpolator->ns_skipped += delta_nsec - offset;
- time_interpolator->offset = 0;
- }
- time_interpolator->last_counter = counter;
-
- /* Tuning logic for time interpolator invoked every minute or so.
- * Decrease interpolator clock speed if no skips occurred and an offset is carried.
- * Increase interpolator clock speed if we skip too much time.
- */
- if (jiffies % INTERPOLATOR_ADJUST == 0)
- {
- if (time_interpolator->skips == 0 && time_interpolator->offset > tick_nsec)
- time_interpolator->nsec_per_cyc--;
- if (time_interpolator->ns_skipped > INTERPOLATOR_MAX_SKIP && time_interpolator->offset == 0)
- time_interpolator->nsec_per_cyc++;
- time_interpolator->skips = 0;
- time_interpolator->ns_skipped = 0;
- }
-}
-
-static inline int
-is_better_time_interpolator(struct time_interpolator *new)
-{
- if (!time_interpolator)
- return 1;
- return new->frequency > 2*time_interpolator->frequency ||
- (unsigned long)new->drift < (unsigned long)time_interpolator->drift;
-}
-
-void
-register_time_interpolator(struct time_interpolator *ti)
-{
- unsigned long flags;
-
- /* Sanity check */
- BUG_ON(ti->frequency == 0 || ti->mask == 0);
-
- ti->nsec_per_cyc = ((u64)NSEC_PER_SEC << ti->shift) / ti->frequency;
- spin_lock(&time_interpolator_lock);
- write_seqlock_irqsave(&xtime_lock, flags);
- if (is_better_time_interpolator(ti)) {
- time_interpolator = ti;
- time_interpolator_reset();
- }
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- ti->next = time_interpolator_list;
- time_interpolator_list = ti;
- spin_unlock(&time_interpolator_lock);
-}
-
-void
-unregister_time_interpolator(struct time_interpolator *ti)
-{
- struct time_interpolator *curr, **prev;
- unsigned long flags;
-
- spin_lock(&time_interpolator_lock);
- prev = &time_interpolator_list;
- for (curr = *prev; curr; curr = curr->next) {
- if (curr == ti) {
- *prev = curr->next;
- break;
- }
- prev = &curr->next;
- }
-
- write_seqlock_irqsave(&xtime_lock, flags);
- if (ti == time_interpolator) {
- /* we lost the best time-interpolator: */
- time_interpolator = NULL;
- /* find the next-best interpolator */
- for (curr = time_interpolator_list; curr; curr = curr->next)
- if (is_better_time_interpolator(curr))
- time_interpolator = curr;
- time_interpolator_reset();
- }
- write_sequnlock_irqrestore(&xtime_lock, flags);
- spin_unlock(&time_interpolator_lock);
-}
-#endif /* CONFIG_TIME_INTERPOLATION */
-
/**
* msleep - sleep safely even with waitqueue interruptions
* @msecs: Time in milliseconds to sleep for