arch/arm/mach-sa1100/neponset.c - kernel/msm-4.9 - Gitiles

 /*
  * linux/arch/arm/mach-sa1100/neponset.c
  *
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>

 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
 #include <mach/assabet.h>
 #include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>

 /*
  * Install handler for Neponset IRQ.  Note that we have to loop here
  * since the ETHERNET and USAR IRQs are level based, and we need to
  * ensure that the IRQ signal is deasserted before returning.  This
  * is rather unfortunate.
  */
 static void
 neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int irr;

 	while (1) {
 		/*
 		 * Acknowledge the parent IRQ.
 		 */
 		desc->irq_data.chip->irq_ack(&desc->irq_data);

 		/*
 		 * Read the interrupt reason register.  Let's have all
 		 * active IRQ bits high.  Note: there is a typo in the
 		 * Neponset user's guide for the SA1111 IRR level.
 		 */
 		irr = IRR ^ (IRR_ETHERNET | IRR_USAR);

 		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
 			break;

 		/*
 		 * Since there is no individual mask, we have to
 		 * mask the parent IRQ.  This is safe, since we'll
 		 * recheck the register for any pending IRQs.
 		 */
 		if (irr & (IRR_ETHERNET | IRR_USAR)) {
 			desc->irq_data.chip->irq_mask(&desc->irq_data);

 			/*
 			 * Ack the interrupt now to prevent re-entering
 			 * this neponset handler.  Again, this is safe
 			 * since we'll check the IRR register prior to
 			 * leaving.
 			 */
 			desc->irq_data.chip->irq_ack(&desc->irq_data);

 			if (irr & IRR_ETHERNET) {
 				generic_handle_irq(IRQ_NEPONSET_SMC9196);
 			}

 			if (irr & IRR_USAR) {
 				generic_handle_irq(IRQ_NEPONSET_USAR);
 			}

 			desc->irq_data.chip->irq_unmask(&desc->irq_data);
 		}

 		if (irr & IRR_SA1111) {
 			generic_handle_irq(IRQ_NEPONSET_SA1111);
 		}
 	}
 }

 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 {
 	u_int mdm_ctl0 = MDM_CTL_0;

 	if (port->mapbase == _Ser1UTCR0) {
 		if (mctrl & TIOCM_RTS)
 			mdm_ctl0 &= ~MDM_CTL0_RTS2;
 		else
 			mdm_ctl0 |= MDM_CTL0_RTS2;

 		if (mctrl & TIOCM_DTR)
 			mdm_ctl0 &= ~MDM_CTL0_DTR2;
 		else
 			mdm_ctl0 |= MDM_CTL0_DTR2;
 	} else if (port->mapbase == _Ser3UTCR0) {
 		if (mctrl & TIOCM_RTS)
 			mdm_ctl0 &= ~MDM_CTL0_RTS1;
 		else
 			mdm_ctl0 |= MDM_CTL0_RTS1;

 		if (mctrl & TIOCM_DTR)
 			mdm_ctl0 &= ~MDM_CTL0_DTR1;
 		else
 			mdm_ctl0 |= MDM_CTL0_DTR1;
 	}

 	MDM_CTL_0 = mdm_ctl0;
 }

 static u_int neponset_get_mctrl(struct uart_port *port)
 {
 	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
 	u_int mdm_ctl1 = MDM_CTL_1;

 	if (port->mapbase == _Ser1UTCR0) {
 		if (mdm_ctl1 & MDM_CTL1_DCD2)
 			ret &= ~TIOCM_CD;
 		if (mdm_ctl1 & MDM_CTL1_CTS2)
 			ret &= ~TIOCM_CTS;
 		if (mdm_ctl1 & MDM_CTL1_DSR2)
 			ret &= ~TIOCM_DSR;
 	} else if (port->mapbase == _Ser3UTCR0) {
 		if (mdm_ctl1 & MDM_CTL1_DCD1)
 			ret &= ~TIOCM_CD;
 		if (mdm_ctl1 & MDM_CTL1_CTS1)
 			ret &= ~TIOCM_CTS;
 		if (mdm_ctl1 & MDM_CTL1_DSR1)
 			ret &= ~TIOCM_DSR;
 	}

 	return ret;
 }

 static struct sa1100_port_fns neponset_port_fns __devinitdata = {
 	.set_mctrl	= neponset_set_mctrl,
 	.get_mctrl	= neponset_get_mctrl,
 };

 static int __devinit neponset_probe(struct platform_device *dev)
 {
 	sa1100_register_uart_fns(&neponset_port_fns);

 	/*
 	 * Install handler for GPIO25.
 	 */
 	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);

 	/*
 	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but
 	 * unfortunately something on the Neponset activates
 	 * this IRQ on sleep (ethernet?)
 	 */
 #if 0
 	enable_irq_wake(IRQ_GPIO25);
 #endif

 	/*
 	 * Setup other Neponset IRQs.  SA1111 will be done by the
 	 * generic SA1111 code.
 	 */
 	set_irq_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
 	set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
 	set_irq_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
 	set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);

 	/*
 	 * Disable GPIO 0/1 drivers so the buttons work on the module.
 	 */
 	NCR_0 = NCR_GP01_OFF;

 	return 0;
 }

 #ifdef CONFIG_PM

 /*
  * LDM power management.
  */
 static unsigned int neponset_saved_state;

 static int neponset_suspend(struct platform_device *dev, pm_message_t state)
 {
 	/*
 	 * Save state.
 	 */
 	neponset_saved_state = NCR_0;

 	return 0;
 }

 static int neponset_resume(struct platform_device *dev)
 {
 	NCR_0 = neponset_saved_state;

 	return 0;
 }

 #else
 #define neponset_suspend NULL
 #define neponset_resume  NULL
 #endif

 static struct platform_driver neponset_device_driver = {
 	.probe		= neponset_probe,
 	.suspend	= neponset_suspend,
 	.resume		= neponset_resume,
 	.driver		= {
 		.name	= "neponset",
 	},
 };

 static struct resource neponset_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
 		.end	= 0x17ffffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static struct platform_device neponset_device = {
 	.name		= "neponset",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(neponset_resources),
 	.resource	= neponset_resources,
 };

 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x40000000,
 		.end	= 0x40001fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_NEPONSET_SA1111,
 		.end	= IRQ_NEPONSET_SA1111,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct sa1111_platform_data sa1111_info = {
 	.irq_base	= IRQ_BOARD_END,
 };

 static u64 sa1111_dmamask = 0xffffffffUL;

 static struct platform_device sa1111_device = {
 	.name		= "sa1111",
 	.id		= 0,
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
 		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
 };

 static struct resource smc91x_resources[] = {
 	[0] = {
 		.name	= "smc91x-regs",
 		.start	= SA1100_CS3_PHYS,
 		.end	= SA1100_CS3_PHYS + 0x01ffffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_NEPONSET_SMC9196,
 		.end	= IRQ_NEPONSET_SMC9196,
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
 		.name	= "smc91x-attrib",
 		.start	= SA1100_CS3_PHYS + 0x02000000,
 		.end	= SA1100_CS3_PHYS + 0x03ffffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };

 static struct platform_device *devices[] __initdata = {
 	&neponset_device,
 	&sa1111_device,
 	&smc91x_device,
 };

 extern void sa1110_mb_disable(void);

 static int __init neponset_init(void)
 {
 	platform_driver_register(&neponset_device_driver);

 	/*
 	 * The Neponset is only present on the Assabet machine type.
 	 */
 	if (!machine_is_assabet())
 		return -ENODEV;

 	/*
 	 * Ensure that the memory bus request/grant signals are setup,
 	 * and the grant is held in its inactive state, whether or not
 	 * we actually have a Neponset attached.
 	 */
 	sa1110_mb_disable();

 	if (!machine_has_neponset()) {
 		printk(KERN_DEBUG "Neponset expansion board not present\n");
 		return -ENODEV;
 	}

 	if (WHOAMI != 0x11) {
 		printk(KERN_WARNING "Neponset board detected, but "
 			"wrong ID: %02x\n", WHOAMI);
 		return -ENODEV;
 	}

 	return platform_add_devices(devices, ARRAY_SIZE(devices));
 }

 subsys_initcall(neponset_init);

 static struct map_desc neponset_io_desc[] __initdata = {
 	{	/* System Registers */
 		.virtual	=  0xf3000000,
 		.pfn		= __phys_to_pfn(0x10000000),
 		.length		= SZ_1M,
 		.type		= MT_DEVICE
 	}, {	/* SA-1111 */
 		.virtual	=  0xf4000000,
 		.pfn		= __phys_to_pfn(0x40000000),
 		.length		= SZ_1M,
 		.type		= MT_DEVICE
 	}
 };

 void __init neponset_map_io(void)
 {
 	iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
 }
	/*
	* linux/arch/arm/mach-sa1100/neponset.c
	*
	*/
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/tty.h>
	#include <linux/ioport.h>
	#include <linux/serial_core.h>
	#include <linux/platform_device.h>

	#include <mach/hardware.h>
	#include <asm/mach-types.h>
	#include <asm/irq.h>
	#include <asm/mach/map.h>
	#include <asm/mach/irq.h>
	#include <asm/mach/serial_sa1100.h>
	#include <mach/assabet.h>
	#include <mach/neponset.h>
	#include <asm/hardware/sa1111.h>
	#include <asm/sizes.h>

	/*
	* Install handler for Neponset IRQ. Note that we have to loop here
	* since the ETHERNET and USAR IRQs are level based, and we need to
	* ensure that the IRQ signal is deasserted before returning. This
	* is rather unfortunate.
	*/
	static void
	neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
	{
	unsigned int irr;

	while (1) {
	/*
	* Acknowledge the parent IRQ.
	*/
	desc->irq_data.chip->irq_ack(&desc->irq_data);

	/*
	* Read the interrupt reason register. Let's have all
	* active IRQ bits high. Note: there is a typo in the
	* Neponset user's guide for the SA1111 IRR level.
	*/
	irr = IRR ^ (IRR_ETHERNET \| IRR_USAR);

	if ((irr & (IRR_ETHERNET \| IRR_USAR \| IRR_SA1111)) == 0)
	break;

	/*
	* Since there is no individual mask, we have to
	* mask the parent IRQ. This is safe, since we'll
	* recheck the register for any pending IRQs.
	*/
	if (irr & (IRR_ETHERNET \| IRR_USAR)) {
	desc->irq_data.chip->irq_mask(&desc->irq_data);

	/*
	* Ack the interrupt now to prevent re-entering
	* this neponset handler. Again, this is safe
	* since we'll check the IRR register prior to
	* leaving.
	*/
	desc->irq_data.chip->irq_ack(&desc->irq_data);

	if (irr & IRR_ETHERNET) {
	generic_handle_irq(IRQ_NEPONSET_SMC9196);
	}

	if (irr & IRR_USAR) {
	generic_handle_irq(IRQ_NEPONSET_USAR);
	}

	desc->irq_data.chip->irq_unmask(&desc->irq_data);
	}

	if (irr & IRR_SA1111) {
	generic_handle_irq(IRQ_NEPONSET_SA1111);
	}
	}
	}

	static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
	{
	u_int mdm_ctl0 = MDM_CTL_0;

	if (port->mapbase == _Ser1UTCR0) {
	if (mctrl & TIOCM_RTS)
	mdm_ctl0 &= ~MDM_CTL0_RTS2;
	else
	mdm_ctl0 \|= MDM_CTL0_RTS2;

	if (mctrl & TIOCM_DTR)
	mdm_ctl0 &= ~MDM_CTL0_DTR2;
	else
	mdm_ctl0 \|= MDM_CTL0_DTR2;
	} else if (port->mapbase == _Ser3UTCR0) {
	if (mctrl & TIOCM_RTS)
	mdm_ctl0 &= ~MDM_CTL0_RTS1;
	else
	mdm_ctl0 \|= MDM_CTL0_RTS1;

	if (mctrl & TIOCM_DTR)
	mdm_ctl0 &= ~MDM_CTL0_DTR1;
	else
	mdm_ctl0 \|= MDM_CTL0_DTR1;
	}

	MDM_CTL_0 = mdm_ctl0;
	}

	static u_int neponset_get_mctrl(struct uart_port *port)
	{
	u_int ret = TIOCM_CD \| TIOCM_CTS \| TIOCM_DSR;
	u_int mdm_ctl1 = MDM_CTL_1;

	if (port->mapbase == _Ser1UTCR0) {
	if (mdm_ctl1 & MDM_CTL1_DCD2)
	ret &= ~TIOCM_CD;
	if (mdm_ctl1 & MDM_CTL1_CTS2)
	ret &= ~TIOCM_CTS;
	if (mdm_ctl1 & MDM_CTL1_DSR2)
	ret &= ~TIOCM_DSR;
	} else if (port->mapbase == _Ser3UTCR0) {
	if (mdm_ctl1 & MDM_CTL1_DCD1)
	ret &= ~TIOCM_CD;
	if (mdm_ctl1 & MDM_CTL1_CTS1)
	ret &= ~TIOCM_CTS;
	if (mdm_ctl1 & MDM_CTL1_DSR1)
	ret &= ~TIOCM_DSR;
	}

	return ret;
	}

	static struct sa1100_port_fns neponset_port_fns __devinitdata = {
	.set_mctrl = neponset_set_mctrl,
	.get_mctrl = neponset_get_mctrl,
	};

	static int __devinit neponset_probe(struct platform_device *dev)
	{
	sa1100_register_uart_fns(&neponset_port_fns);

	/*
	* Install handler for GPIO25.
	*/
	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);

	/*
	* We would set IRQ_GPIO25 to be a wake-up IRQ, but
	* unfortunately something on the Neponset activates
	* this IRQ on sleep (ethernet?)
	*/
	#if 0
	enable_irq_wake(IRQ_GPIO25);
	#endif

	/*
	* Setup other Neponset IRQs. SA1111 will be done by the
	* generic SA1111 code.
	*/
	set_irq_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
	set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID \| IRQF_PROBE);
	set_irq_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
	set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID \| IRQF_PROBE);

	/*
	* Disable GPIO 0/1 drivers so the buttons work on the module.
	*/
	NCR_0 = NCR_GP01_OFF;

	return 0;
	}

	#ifdef CONFIG_PM

	/*
	* LDM power management.
	*/
	static unsigned int neponset_saved_state;

	static int neponset_suspend(struct platform_device *dev, pm_message_t state)
	{
	/*
	* Save state.
	*/
	neponset_saved_state = NCR_0;

	return 0;
	}

	static int neponset_resume(struct platform_device *dev)
	{
	NCR_0 = neponset_saved_state;

	return 0;
	}

	#else
	#define neponset_suspend NULL
	#define neponset_resume NULL
	#endif

	static struct platform_driver neponset_device_driver = {
	.probe = neponset_probe,
	.suspend = neponset_suspend,
	.resume = neponset_resume,
	.driver = {
	.name = "neponset",
	},
	};

	static struct resource neponset_resources[] = {
	[0] = {
	.start = 0x10000000,
	.end = 0x17ffffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device neponset_device = {
	.name = "neponset",
	.id = 0,
	.num_resources = ARRAY_SIZE(neponset_resources),
	.resource = neponset_resources,
	};

	static struct resource sa1111_resources[] = {
	[0] = {
	.start = 0x40000000,
	.end = 0x40001fff,
	.flags = IORESOURCE_MEM,
	},
	[1] = {
	.start = IRQ_NEPONSET_SA1111,
	.end = IRQ_NEPONSET_SA1111,
	.flags = IORESOURCE_IRQ,
	},
	};

	static struct sa1111_platform_data sa1111_info = {
	.irq_base = IRQ_BOARD_END,
	};

	static u64 sa1111_dmamask = 0xffffffffUL;

	static struct platform_device sa1111_device = {
	.name = "sa1111",
	.id = 0,
	.dev = {
	.dma_mask = &sa1111_dmamask,
	.coherent_dma_mask = 0xffffffff,
	.platform_data = &sa1111_info,
	},
	.num_resources = ARRAY_SIZE(sa1111_resources),
	.resource = sa1111_resources,
	};

	static struct resource smc91x_resources[] = {
	[0] = {
	.name = "smc91x-regs",
	.start = SA1100_CS3_PHYS,
	.end = SA1100_CS3_PHYS + 0x01ffffff,
	.flags = IORESOURCE_MEM,
	},
	[1] = {
	.start = IRQ_NEPONSET_SMC9196,
	.end = IRQ_NEPONSET_SMC9196,
	.flags = IORESOURCE_IRQ,
	},
	[2] = {
	.name = "smc91x-attrib",
	.start = SA1100_CS3_PHYS + 0x02000000,
	.end = SA1100_CS3_PHYS + 0x03ffffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device smc91x_device = {
	.name = "smc91x",
	.id = 0,
	.num_resources = ARRAY_SIZE(smc91x_resources),
	.resource = smc91x_resources,
	};

	static struct platform_device *devices[] __initdata = {
	&neponset_device,
	&sa1111_device,
	&smc91x_device,
	};

	extern void sa1110_mb_disable(void);

	static int __init neponset_init(void)
	{
	platform_driver_register(&neponset_device_driver);

	/*
	* The Neponset is only present on the Assabet machine type.
	*/
	if (!machine_is_assabet())
	return -ENODEV;

	/*
	* Ensure that the memory bus request/grant signals are setup,
	* and the grant is held in its inactive state, whether or not
	* we actually have a Neponset attached.
	*/
	sa1110_mb_disable();

	if (!machine_has_neponset()) {
	printk(KERN_DEBUG "Neponset expansion board not present\n");
	return -ENODEV;
	}

	if (WHOAMI != 0x11) {
	printk(KERN_WARNING "Neponset board detected, but "
	"wrong ID: %02x\n", WHOAMI);
	return -ENODEV;
	}

	return platform_add_devices(devices, ARRAY_SIZE(devices));
	}

	subsys_initcall(neponset_init);

	static struct map_desc neponset_io_desc[] __initdata = {
	{ /* System Registers */
	.virtual = 0xf3000000,
	.pfn = __phys_to_pfn(0x10000000),
	.length = SZ_1M,
	.type = MT_DEVICE
	}, { /* SA-1111 */
	.virtual = 0xf4000000,
	.pfn = __phys_to_pfn(0x40000000),
	.length = SZ_1M,
	.type = MT_DEVICE
	}
	};

	void __init neponset_map_io(void)
	{
	iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
	}