| /* |
| * Clk driver for NXP LPC18xx/43xx Configuration Registers (CREG) |
| * |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #define LPC18XX_CREG_CREG0 0x004 |
| #define LPC18XX_CREG_CREG0_EN1KHZ BIT(0) |
| #define LPC18XX_CREG_CREG0_EN32KHZ BIT(1) |
| #define LPC18XX_CREG_CREG0_RESET32KHZ BIT(2) |
| #define LPC18XX_CREG_CREG0_PD32KHZ BIT(3) |
| |
| #define to_clk_creg(_hw) container_of(_hw, struct clk_creg_data, hw) |
| |
| enum { |
| CREG_CLK_1KHZ, |
| CREG_CLK_32KHZ, |
| CREG_CLK_MAX, |
| }; |
| |
| struct clk_creg_data { |
| struct clk_hw hw; |
| const char *name; |
| struct regmap *reg; |
| unsigned int en_mask; |
| const struct clk_ops *ops; |
| }; |
| |
| #define CREG_CLK(_name, _emask, _ops) \ |
| { \ |
| .name = _name, \ |
| .en_mask = LPC18XX_CREG_CREG0_##_emask, \ |
| .ops = &_ops, \ |
| } |
| |
| static int clk_creg_32k_prepare(struct clk_hw *hw) |
| { |
| struct clk_creg_data *creg = to_clk_creg(hw); |
| int ret; |
| |
| ret = regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, |
| LPC18XX_CREG_CREG0_PD32KHZ | |
| LPC18XX_CREG_CREG0_RESET32KHZ, 0); |
| |
| /* |
| * Powering up the 32k oscillator takes a long while |
| * and sadly there aren't any status bit to poll. |
| */ |
| msleep(2500); |
| |
| return ret; |
| } |
| |
| static void clk_creg_32k_unprepare(struct clk_hw *hw) |
| { |
| struct clk_creg_data *creg = to_clk_creg(hw); |
| |
| regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, |
| LPC18XX_CREG_CREG0_PD32KHZ, |
| LPC18XX_CREG_CREG0_PD32KHZ); |
| } |
| |
| static int clk_creg_32k_is_prepared(struct clk_hw *hw) |
| { |
| struct clk_creg_data *creg = to_clk_creg(hw); |
| u32 reg; |
| |
| regmap_read(creg->reg, LPC18XX_CREG_CREG0, ®); |
| |
| return !(reg & LPC18XX_CREG_CREG0_PD32KHZ) && |
| !(reg & LPC18XX_CREG_CREG0_RESET32KHZ); |
| } |
| |
| static unsigned long clk_creg_1k_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return parent_rate / 32; |
| } |
| |
| static int clk_creg_enable(struct clk_hw *hw) |
| { |
| struct clk_creg_data *creg = to_clk_creg(hw); |
| |
| return regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, |
| creg->en_mask, creg->en_mask); |
| } |
| |
| static void clk_creg_disable(struct clk_hw *hw) |
| { |
| struct clk_creg_data *creg = to_clk_creg(hw); |
| |
| regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, |
| creg->en_mask, 0); |
| } |
| |
| static int clk_creg_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_creg_data *creg = to_clk_creg(hw); |
| u32 reg; |
| |
| regmap_read(creg->reg, LPC18XX_CREG_CREG0, ®); |
| |
| return !!(reg & creg->en_mask); |
| } |
| |
| static const struct clk_ops clk_creg_32k = { |
| .enable = clk_creg_enable, |
| .disable = clk_creg_disable, |
| .is_enabled = clk_creg_is_enabled, |
| .prepare = clk_creg_32k_prepare, |
| .unprepare = clk_creg_32k_unprepare, |
| .is_prepared = clk_creg_32k_is_prepared, |
| }; |
| |
| static const struct clk_ops clk_creg_1k = { |
| .enable = clk_creg_enable, |
| .disable = clk_creg_disable, |
| .is_enabled = clk_creg_is_enabled, |
| .recalc_rate = clk_creg_1k_recalc_rate, |
| }; |
| |
| static struct clk_creg_data clk_creg_clocks[] = { |
| [CREG_CLK_1KHZ] = CREG_CLK("1khz_clk", EN1KHZ, clk_creg_1k), |
| [CREG_CLK_32KHZ] = CREG_CLK("32khz_clk", EN32KHZ, clk_creg_32k), |
| }; |
| |
| static struct clk *clk_register_creg_clk(struct device *dev, |
| struct clk_creg_data *creg_clk, |
| const char **parent_name, |
| struct regmap *syscon) |
| { |
| struct clk_init_data init; |
| |
| init.ops = creg_clk->ops; |
| init.name = creg_clk->name; |
| init.parent_names = parent_name; |
| init.num_parents = 1; |
| init.flags = 0; |
| |
| creg_clk->reg = syscon; |
| creg_clk->hw.init = &init; |
| |
| if (dev) |
| return devm_clk_register(dev, &creg_clk->hw); |
| |
| return clk_register(NULL, &creg_clk->hw); |
| } |
| |
| static struct clk *clk_creg_early[CREG_CLK_MAX]; |
| static struct clk_onecell_data clk_creg_early_data = { |
| .clks = clk_creg_early, |
| .clk_num = CREG_CLK_MAX, |
| }; |
| |
| static void __init lpc18xx_creg_clk_init(struct device_node *np) |
| { |
| const char *clk_32khz_parent; |
| struct regmap *syscon; |
| |
| syscon = syscon_node_to_regmap(np->parent); |
| if (IS_ERR(syscon)) { |
| pr_err("%s: syscon lookup failed\n", __func__); |
| return; |
| } |
| |
| clk_32khz_parent = of_clk_get_parent_name(np, 0); |
| |
| clk_creg_early[CREG_CLK_32KHZ] = |
| clk_register_creg_clk(NULL, &clk_creg_clocks[CREG_CLK_32KHZ], |
| &clk_32khz_parent, syscon); |
| clk_creg_early[CREG_CLK_1KHZ] = ERR_PTR(-EPROBE_DEFER); |
| |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_creg_early_data); |
| } |
| CLK_OF_DECLARE(lpc18xx_creg_clk, "nxp,lpc1850-creg-clk", lpc18xx_creg_clk_init); |
| |
| static struct clk *clk_creg[CREG_CLK_MAX]; |
| static struct clk_onecell_data clk_creg_data = { |
| .clks = clk_creg, |
| .clk_num = CREG_CLK_MAX, |
| }; |
| |
| static int lpc18xx_creg_clk_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct regmap *syscon; |
| |
| syscon = syscon_node_to_regmap(np->parent); |
| if (IS_ERR(syscon)) { |
| dev_err(&pdev->dev, "syscon lookup failed\n"); |
| return PTR_ERR(syscon); |
| } |
| |
| clk_creg[CREG_CLK_32KHZ] = clk_creg_early[CREG_CLK_32KHZ]; |
| clk_creg[CREG_CLK_1KHZ] = |
| clk_register_creg_clk(NULL, &clk_creg_clocks[CREG_CLK_1KHZ], |
| &clk_creg_clocks[CREG_CLK_32KHZ].name, |
| syscon); |
| |
| return of_clk_add_provider(np, of_clk_src_onecell_get, &clk_creg_data); |
| } |
| |
| static const struct of_device_id lpc18xx_creg_clk_of_match[] = { |
| { .compatible = "nxp,lpc1850-creg-clk" }, |
| {}, |
| }; |
| |
| static struct platform_driver lpc18xx_creg_clk_driver = { |
| .probe = lpc18xx_creg_clk_probe, |
| .driver = { |
| .name = "lpc18xx-creg-clk", |
| .of_match_table = lpc18xx_creg_clk_of_match, |
| }, |
| }; |
| builtin_platform_driver(lpc18xx_creg_clk_driver); |