[SCSI] ipr: Support new device queueing model
New ipr adapters support a new device queueing model in the
adapter firmware. The queueing model is the NACA queueing model,
but it does not mean use of NACA is required. The new model removes
some of the adapter firmware queue state that made handling QERR=0
almost impossible. The queueing model on older adapters included the
concept of a queue frozen state, which would freeze the response
queue in the adapter when a check condition occurred, requiring a
a primitive to resume the queue. The new queueing model removes this
complexity.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index cca4972..2f84f26 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -814,7 +814,7 @@
**/
static void ipr_init_res_entry(struct ipr_resource_entry *res)
{
- res->needs_sync_complete = 1;
+ res->needs_sync_complete = 0;
res->in_erp = 0;
res->add_to_ml = 0;
res->del_from_ml = 0;
@@ -3251,7 +3251,8 @@
res->add_to_ml = 0;
res->in_erp = 0;
sdev->hostdata = res;
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
rc = 0;
break;
}
@@ -3515,7 +3516,8 @@
}
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
LEAVE;
return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
@@ -3819,7 +3821,8 @@
}
if (res) {
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
res->in_erp = 0;
}
ipr_unmap_sglist(ioa_cfg, ipr_cmd);
@@ -4089,6 +4092,30 @@
}
/**
+ * ipr_get_autosense - Copy autosense data to sense buffer
+ * @ipr_cmd: ipr command struct
+ *
+ * This function copies the autosense buffer to the buffer
+ * in the scsi_cmd, if there is autosense available.
+ *
+ * Return value:
+ * 1 if autosense was available / 0 if not
+ **/
+static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)
+{
+ struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+
+ if ((be32_to_cpu(ioasa->ioasc_specific) &
+ (IPR_ADDITIONAL_STATUS_FMT | IPR_AUTOSENSE_VALID)) == 0)
+ return 0;
+
+ memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
+ min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
+ SCSI_SENSE_BUFFERSIZE));
+ return 1;
+}
+
+/**
* ipr_erp_start - Process an error response for a SCSI op
* @ioa_cfg: ioa config struct
* @ipr_cmd: ipr command struct
@@ -4118,7 +4145,10 @@
switch (ioasc & IPR_IOASC_IOASC_MASK) {
case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
- scsi_cmd->result |= (DID_IMM_RETRY << 16);
+ if (ipr_is_naca_model(res))
+ scsi_cmd->result |= (DID_ABORT << 16);
+ else
+ scsi_cmd->result |= (DID_IMM_RETRY << 16);
break;
case IPR_IOASC_IR_RESOURCE_HANDLE:
case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA:
@@ -4126,7 +4156,8 @@
break;
case IPR_IOASC_HW_SEL_TIMEOUT:
scsi_cmd->result |= (DID_NO_CONNECT << 16);
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
break;
case IPR_IOASC_SYNC_REQUIRED:
if (!res->in_erp)
@@ -4146,21 +4177,27 @@
if (!res->resetting_device)
scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);
scsi_cmd->result |= (DID_ERROR << 16);
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
break;
case IPR_IOASC_HW_DEV_BUS_STATUS:
scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);
if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {
- ipr_erp_cancel_all(ipr_cmd);
- return;
+ if (!ipr_get_autosense(ipr_cmd)) {
+ if (!ipr_is_naca_model(res)) {
+ ipr_erp_cancel_all(ipr_cmd);
+ return;
+ }
+ }
}
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
break;
case IPR_IOASC_NR_INIT_CMD_REQUIRED:
break;
default:
scsi_cmd->result |= (DID_ERROR << 16);
- if (!ipr_is_vset_device(res))
+ if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
}
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index f7fa8cd..c9cc40e 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -302,6 +302,10 @@
#define IPR_SUBTYPE_GENERIC_SCSI 1
#define IPR_SUBTYPE_VOLUME_SET 2
+#define IPR_QUEUEING_MODEL(res) ((((res)->cfgte.flags) & 0x70) >> 4)
+#define IPR_QUEUE_FROZEN_MODEL 0
+#define IPR_QUEUE_NACA_MODEL 1
+
struct ipr_res_addr res_addr;
__be32 res_handle;
__be32 reserved4[2];
@@ -1294,6 +1298,20 @@
}
/**
+ * ipr_is_naca_model - Determine if a resource is using NACA queueing model
+ * @res: resource entry struct
+ *
+ * Return value:
+ * 1 if NACA queueing model / 0 if not NACA queueing model
+ **/
+static inline int ipr_is_naca_model(struct ipr_resource_entry *res)
+{
+ if (ipr_is_gscsi(res) && IPR_QUEUEING_MODEL(res) == IPR_QUEUE_NACA_MODEL)
+ return 1;
+ return 0;
+}
+
+/**
* ipr_is_device - Determine if resource address is that of a device
* @res_addr: resource address struct
*