| /* |
| * Driver for the Conexant CX23885 PCIe bridge |
| * |
| * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/kthread.h> |
| #include <linux/file.h> |
| #include <linux/suspend.h> |
| |
| #include "cx23885.h" |
| #include <media/v4l2-common.h> |
| |
| #include "dvb_ca_en50221.h" |
| #include "s5h1409.h" |
| #include "s5h1411.h" |
| #include "mt2131.h" |
| #include "tda8290.h" |
| #include "tda18271.h" |
| #include "lgdt330x.h" |
| #include "xc4000.h" |
| #include "xc5000.h" |
| #include "max2165.h" |
| #include "tda10048.h" |
| #include "tuner-xc2028.h" |
| #include "tuner-simple.h" |
| #include "dib7000p.h" |
| #include "dib0070.h" |
| #include "dibx000_common.h" |
| #include "zl10353.h" |
| #include "stv0900.h" |
| #include "stv0900_reg.h" |
| #include "stv6110.h" |
| #include "lnbh24.h" |
| #include "cx24116.h" |
| #include "cx24117.h" |
| #include "cimax2.h" |
| #include "lgs8gxx.h" |
| #include "netup-eeprom.h" |
| #include "netup-init.h" |
| #include "lgdt3305.h" |
| #include "atbm8830.h" |
| #include "ts2020.h" |
| #include "ds3000.h" |
| #include "cx23885-f300.h" |
| #include "altera-ci.h" |
| #include "stv0367.h" |
| #include "drxk.h" |
| #include "mt2063.h" |
| #include "stv090x.h" |
| #include "stb6100.h" |
| #include "stb6100_cfg.h" |
| #include "tda10071.h" |
| #include "a8293.h" |
| #include "mb86a20s.h" |
| #include "si2165.h" |
| #include "si2168.h" |
| #include "si2157.h" |
| #include "sp2.h" |
| #include "m88ds3103.h" |
| #include "m88rs6000t.h" |
| |
| static unsigned int debug; |
| |
| #define dprintk(level, fmt, arg...)\ |
| do { if (debug >= level)\ |
| printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ |
| } while (0) |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static unsigned int alt_tuner; |
| module_param(alt_tuner, int, 0644); |
| MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration"); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt, |
| unsigned int *num_buffers, unsigned int *num_planes, |
| unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct cx23885_tsport *port = q->drv_priv; |
| |
| port->ts_packet_size = 188 * 4; |
| port->ts_packet_count = 32; |
| *num_planes = 1; |
| sizes[0] = port->ts_packet_size * port->ts_packet_count; |
| alloc_ctxs[0] = port->dev->alloc_ctx; |
| *num_buffers = 32; |
| return 0; |
| } |
| |
| |
| static int buffer_prepare(struct vb2_buffer *vb) |
| { |
| struct cx23885_tsport *port = vb->vb2_queue->drv_priv; |
| struct cx23885_buffer *buf = |
| container_of(vb, struct cx23885_buffer, vb); |
| |
| return cx23885_buf_prepare(buf, port); |
| } |
| |
| static void buffer_finish(struct vb2_buffer *vb) |
| { |
| struct cx23885_tsport *port = vb->vb2_queue->drv_priv; |
| struct cx23885_dev *dev = port->dev; |
| struct cx23885_buffer *buf = container_of(vb, |
| struct cx23885_buffer, vb); |
| |
| cx23885_free_buffer(dev, buf); |
| } |
| |
| static void buffer_queue(struct vb2_buffer *vb) |
| { |
| struct cx23885_tsport *port = vb->vb2_queue->drv_priv; |
| struct cx23885_buffer *buf = container_of(vb, |
| struct cx23885_buffer, vb); |
| |
| cx23885_buf_queue(port, buf); |
| } |
| |
| static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open) |
| { |
| struct vb2_dvb_frontends *f; |
| struct vb2_dvb_frontend *fe; |
| |
| f = &port->frontends; |
| |
| if (f->gate <= 1) /* undefined or fe0 */ |
| fe = vb2_dvb_get_frontend(f, 1); |
| else |
| fe = vb2_dvb_get_frontend(f, f->gate); |
| |
| if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) |
| fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); |
| } |
| |
| static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count) |
| { |
| struct cx23885_tsport *port = q->drv_priv; |
| struct cx23885_dmaqueue *dmaq = &port->mpegq; |
| struct cx23885_buffer *buf = list_entry(dmaq->active.next, |
| struct cx23885_buffer, queue); |
| |
| cx23885_start_dma(port, dmaq, buf); |
| return 0; |
| } |
| |
| static void cx23885_stop_streaming(struct vb2_queue *q) |
| { |
| struct cx23885_tsport *port = q->drv_priv; |
| |
| cx23885_cancel_buffers(port); |
| } |
| |
| static struct vb2_ops dvb_qops = { |
| .queue_setup = queue_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_finish = buffer_finish, |
| .buf_queue = buffer_queue, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| .start_streaming = cx23885_start_streaming, |
| .stop_streaming = cx23885_stop_streaming, |
| }; |
| |
| static struct s5h1409_config hauppauge_generic_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_ON, |
| .qam_if = 44000, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct tda10048_config hauppauge_hvr1200_config = { |
| .demod_address = 0x10 >> 1, |
| .output_mode = TDA10048_SERIAL_OUTPUT, |
| .fwbulkwritelen = TDA10048_BULKWRITE_200, |
| .inversion = TDA10048_INVERSION_ON, |
| .dtv6_if_freq_khz = TDA10048_IF_3300, |
| .dtv7_if_freq_khz = TDA10048_IF_3800, |
| .dtv8_if_freq_khz = TDA10048_IF_4300, |
| .clk_freq_khz = TDA10048_CLK_16000, |
| }; |
| |
| static struct tda10048_config hauppauge_hvr1210_config = { |
| .demod_address = 0x10 >> 1, |
| .output_mode = TDA10048_SERIAL_OUTPUT, |
| .fwbulkwritelen = TDA10048_BULKWRITE_200, |
| .inversion = TDA10048_INVERSION_ON, |
| .dtv6_if_freq_khz = TDA10048_IF_3300, |
| .dtv7_if_freq_khz = TDA10048_IF_3500, |
| .dtv8_if_freq_khz = TDA10048_IF_4000, |
| .clk_freq_khz = TDA10048_CLK_16000, |
| }; |
| |
| static struct s5h1409_config hauppauge_ezqam_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .qam_if = 4000, |
| .inversion = S5H1409_INVERSION_ON, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct s5h1409_config hauppauge_hvr1800lp_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .qam_if = 44000, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct s5h1409_config hauppauge_hvr1500_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct mt2131_config hauppauge_generic_tunerconfig = { |
| 0x61 |
| }; |
| |
| static struct lgdt330x_config fusionhdtv_5_express = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3303, |
| .serial_mpeg = 0x40, |
| }; |
| |
| static struct s5h1409_config hauppauge_hvr1500q_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_ON, |
| .qam_if = 44000, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct s5h1409_config dvico_s5h1409_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_SERIAL_OUTPUT, |
| .gpio = S5H1409_GPIO_ON, |
| .qam_if = 44000, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct s5h1411_config dvico_s5h1411_config = { |
| .output_mode = S5H1411_SERIAL_OUTPUT, |
| .gpio = S5H1411_GPIO_ON, |
| .qam_if = S5H1411_IF_44000, |
| .vsb_if = S5H1411_IF_44000, |
| .inversion = S5H1411_INVERSION_OFF, |
| .status_mode = S5H1411_DEMODLOCKING, |
| .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct s5h1411_config hcw_s5h1411_config = { |
| .output_mode = S5H1411_SERIAL_OUTPUT, |
| .gpio = S5H1411_GPIO_OFF, |
| .vsb_if = S5H1411_IF_44000, |
| .qam_if = S5H1411_IF_4000, |
| .inversion = S5H1411_INVERSION_ON, |
| .status_mode = S5H1411_DEMODLOCKING, |
| .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { |
| .i2c_address = 0x61, |
| .if_khz = 5380, |
| }; |
| |
| static struct xc5000_config dvico_xc5000_tunerconfig = { |
| .i2c_address = 0x64, |
| .if_khz = 5380, |
| }; |
| |
| static struct tda829x_config tda829x_no_probe = { |
| .probe_tuner = TDA829X_DONT_PROBE, |
| }; |
| |
| static struct tda18271_std_map hauppauge_tda18271_std_map = { |
| .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, |
| .if_lvl = 6, .rfagc_top = 0x37 }, |
| .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, |
| .if_lvl = 6, .rfagc_top = 0x37 }, |
| }; |
| |
| static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { |
| .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config hauppauge_tda18271_config = { |
| .std_map = &hauppauge_tda18271_std_map, |
| .gate = TDA18271_GATE_ANALOG, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static struct tda18271_config hauppauge_hvr1200_tuner_config = { |
| .std_map = &hauppauge_hvr1200_tda18271_std_map, |
| .gate = TDA18271_GATE_ANALOG, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static struct tda18271_config hauppauge_hvr1210_tuner_config = { |
| .gate = TDA18271_GATE_DIGITAL, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static struct tda18271_config hauppauge_hvr4400_tuner_config = { |
| .gate = TDA18271_GATE_DIGITAL, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static struct tda18271_std_map hauppauge_hvr127x_std_map = { |
| .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, |
| .if_lvl = 1, .rfagc_top = 0x58 }, |
| .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, |
| .if_lvl = 1, .rfagc_top = 0x58 }, |
| }; |
| |
| static struct tda18271_config hauppauge_hvr127x_config = { |
| .std_map = &hauppauge_hvr127x_std_map, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static struct lgdt3305_config hauppauge_lgdt3305_config = { |
| .i2c_addr = 0x0e, |
| .mpeg_mode = LGDT3305_MPEG_SERIAL, |
| .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
| .deny_i2c_rptr = 1, |
| .spectral_inversion = 1, |
| .qam_if_khz = 4000, |
| .vsb_if_khz = 3250, |
| }; |
| |
| static struct dibx000_agc_config xc3028_agc_config = { |
| BAND_VHF | BAND_UHF, /* band_caps */ |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, |
| * P_agc_nb_est=2, P_agc_write=0 |
| */ |
| (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | |
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ |
| |
| 712, /* inv_gain */ |
| 21, /* time_stabiliz */ |
| |
| 0, /* alpha_level */ |
| 118, /* thlock */ |
| |
| 0, /* wbd_inv */ |
| 2867, /* wbd_ref */ |
| 0, /* wbd_sel */ |
| 2, /* wbd_alpha */ |
| |
| 0, /* agc1_max */ |
| 0, /* agc1_min */ |
| 39718, /* agc2_max */ |
| 9930, /* agc2_min */ |
| 0, /* agc1_pt1 */ |
| 0, /* agc1_pt2 */ |
| 0, /* agc1_pt3 */ |
| 0, /* agc1_slope1 */ |
| 0, /* agc1_slope2 */ |
| 0, /* agc2_pt1 */ |
| 128, /* agc2_pt2 */ |
| 29, /* agc2_slope1 */ |
| 29, /* agc2_slope2 */ |
| |
| 17, /* alpha_mant */ |
| 27, /* alpha_exp */ |
| 23, /* beta_mant */ |
| 51, /* beta_exp */ |
| |
| 1, /* perform_agc_softsplit */ |
| }; |
| |
| /* PLL Configuration for COFDM BW_MHz = 8.000000 |
| * With external clock = 30.000000 */ |
| static struct dibx000_bandwidth_config xc3028_bw_config = { |
| 60000, /* internal */ |
| 30000, /* sampling */ |
| 1, /* pll_cfg: prediv */ |
| 8, /* pll_cfg: ratio */ |
| 3, /* pll_cfg: range */ |
| 1, /* pll_cfg: reset */ |
| 0, /* pll_cfg: bypass */ |
| 0, /* misc: refdiv */ |
| 0, /* misc: bypclk_div */ |
| 1, /* misc: IO_CLK_en_core */ |
| 1, /* misc: ADClkSrc */ |
| 0, /* misc: modulo */ |
| (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ |
| (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ |
| 20452225, /* timf */ |
| 30000000 /* xtal_hz */ |
| }; |
| |
| static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| .hostbus_diversity = 1, |
| .tuner_is_baseband = 0, |
| .update_lna = NULL, |
| |
| .agc_config_count = 1, |
| .agc = &xc3028_agc_config, |
| .bw = &xc3028_bw_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .pwm_freq_div = 0, |
| .agc_control = NULL, |
| .spur_protect = 0, |
| |
| .output_mode = OUTMODE_MPEG2_SERIAL, |
| }; |
| |
| static struct zl10353_config dvico_fusionhdtv_xc3028 = { |
| .demod_address = 0x0f, |
| .if2 = 45600, |
| .no_tuner = 1, |
| .disable_i2c_gate_ctrl = 1, |
| }; |
| |
| static struct stv0900_reg stv0900_ts_regs[] = { |
| { R0900_TSGENERAL, 0x00 }, |
| { R0900_P1_TSSPEED, 0x40 }, |
| { R0900_P2_TSSPEED, 0x40 }, |
| { R0900_P1_TSCFGM, 0xc0 }, |
| { R0900_P2_TSCFGM, 0xc0 }, |
| { R0900_P1_TSCFGH, 0xe0 }, |
| { R0900_P2_TSCFGH, 0xe0 }, |
| { R0900_P1_TSCFGL, 0x20 }, |
| { R0900_P2_TSCFGL, 0x20 }, |
| { 0xffff, 0xff }, /* terminate */ |
| }; |
| |
| static struct stv0900_config netup_stv0900_config = { |
| .demod_address = 0x68, |
| .demod_mode = 1, /* dual */ |
| .xtal = 8000000, |
| .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ |
| .diseqc_mode = 2,/* 2/3 PWM */ |
| .ts_config_regs = stv0900_ts_regs, |
| .tun1_maddress = 0,/* 0x60 */ |
| .tun2_maddress = 3,/* 0x63 */ |
| .tun1_adc = 1,/* 1 Vpp */ |
| .tun2_adc = 1,/* 1 Vpp */ |
| }; |
| |
| static struct stv6110_config netup_stv6110_tunerconfig_a = { |
| .i2c_address = 0x60, |
| .mclk = 16000000, |
| .clk_div = 1, |
| .gain = 8, /* +16 dB - maximum gain */ |
| }; |
| |
| static struct stv6110_config netup_stv6110_tunerconfig_b = { |
| .i2c_address = 0x63, |
| .mclk = 16000000, |
| .clk_div = 1, |
| .gain = 8, /* +16 dB - maximum gain */ |
| }; |
| |
| static struct cx24116_config tbs_cx24116_config = { |
| .demod_address = 0x55, |
| }; |
| |
| static struct cx24117_config tbs_cx24117_config = { |
| .demod_address = 0x55, |
| }; |
| |
| static struct ds3000_config tevii_ds3000_config = { |
| .demod_address = 0x68, |
| }; |
| |
| static struct ts2020_config tevii_ts2020_config = { |
| .tuner_address = 0x60, |
| .clk_out_div = 1, |
| .frequency_div = 1146000, |
| }; |
| |
| static struct cx24116_config dvbworld_cx24116_config = { |
| .demod_address = 0x05, |
| }; |
| |
| static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { |
| .prod = LGS8GXX_PROD_LGS8GL5, |
| .demod_address = 0x19, |
| .serial_ts = 0, |
| .ts_clk_pol = 1, |
| .ts_clk_gated = 1, |
| .if_clk_freq = 30400, /* 30.4 MHz */ |
| .if_freq = 5380, /* 5.38 MHz */ |
| .if_neg_center = 1, |
| .ext_adc = 0, |
| .adc_signed = 0, |
| .if_neg_edge = 0, |
| }; |
| |
| static struct xc5000_config mygica_x8506_xc5000_config = { |
| .i2c_address = 0x61, |
| .if_khz = 5380, |
| }; |
| |
| static struct mb86a20s_config mygica_x8507_mb86a20s_config = { |
| .demod_address = 0x10, |
| }; |
| |
| static struct xc5000_config mygica_x8507_xc5000_config = { |
| .i2c_address = 0x61, |
| .if_khz = 4000, |
| }; |
| |
| static struct stv090x_config prof_8000_stv090x_config = { |
| .device = STV0903, |
| .demod_mode = STV090x_SINGLE, |
| .clk_mode = STV090x_CLK_EXT, |
| .xtal = 27000000, |
| .address = 0x6A, |
| .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, |
| .repeater_level = STV090x_RPTLEVEL_64, |
| .adc1_range = STV090x_ADC_2Vpp, |
| .diseqc_envelope_mode = false, |
| |
| .tuner_get_frequency = stb6100_get_frequency, |
| .tuner_set_frequency = stb6100_set_frequency, |
| .tuner_set_bandwidth = stb6100_set_bandwidth, |
| .tuner_get_bandwidth = stb6100_get_bandwidth, |
| }; |
| |
| static struct stb6100_config prof_8000_stb6100_config = { |
| .tuner_address = 0x60, |
| .refclock = 27000000, |
| }; |
| |
| static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| struct cx23885_tsport *port = fe->dvb->priv; |
| struct cx23885_dev *dev = port->dev; |
| |
| if (voltage == SEC_VOLTAGE_18) |
| cx_write(MC417_RWD, 0x00001e00); |
| else if (voltage == SEC_VOLTAGE_13) |
| cx_write(MC417_RWD, 0x00001a00); |
| else |
| cx_write(MC417_RWD, 0x00001800); |
| return 0; |
| } |
| |
| static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx23885_tsport *port = fe->dvb->priv; |
| struct cx23885_dev *dev = port->dev; |
| |
| cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| cx23885_gpio_set(dev, GPIO_1); |
| cx23885_gpio_clear(dev, GPIO_0); |
| break; |
| case SEC_VOLTAGE_18: |
| cx23885_gpio_set(dev, GPIO_1); |
| cx23885_gpio_set(dev, GPIO_0); |
| break; |
| case SEC_VOLTAGE_OFF: |
| cx23885_gpio_clear(dev, GPIO_1); |
| cx23885_gpio_clear(dev, GPIO_0); |
| break; |
| } |
| |
| /* call the frontend set_voltage function */ |
| port->fe_set_voltage(fe, voltage); |
| |
| return 0; |
| } |
| |
| static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx23885_tsport *port = fe->dvb->priv; |
| struct cx23885_dev *dev = port->dev; |
| |
| cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1); |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| cx23885_gpio_set(dev, GPIO_13); |
| cx23885_gpio_clear(dev, GPIO_12); |
| break; |
| case SEC_VOLTAGE_18: |
| cx23885_gpio_set(dev, GPIO_13); |
| cx23885_gpio_set(dev, GPIO_12); |
| break; |
| case SEC_VOLTAGE_OFF: |
| cx23885_gpio_clear(dev, GPIO_13); |
| cx23885_gpio_clear(dev, GPIO_12); |
| break; |
| } |
| /* call the frontend set_voltage function */ |
| return port->fe_set_voltage(fe, voltage); |
| } |
| |
| static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr, |
| u8 data, int *mem) |
| { |
| /* MC417 */ |
| #define SP2_DATA 0x000000ff |
| #define SP2_WR 0x00008000 |
| #define SP2_RD 0x00004000 |
| #define SP2_ACK 0x00001000 |
| #define SP2_ADHI 0x00000800 |
| #define SP2_ADLO 0x00000400 |
| #define SP2_CS1 0x00000200 |
| #define SP2_CS0 0x00000100 |
| #define SP2_EN_ALL 0x00001000 |
| #define SP2_CTRL_OFF (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD) |
| |
| struct cx23885_tsport *port = priv; |
| struct cx23885_dev *dev = port->dev; |
| int ret; |
| int tmp = 0; |
| unsigned long timeout; |
| |
| mutex_lock(&dev->gpio_lock); |
| |
| /* write addr */ |
| cx_write(MC417_OEN, SP2_EN_ALL); |
| cx_write(MC417_RWD, SP2_CTRL_OFF | |
| SP2_ADLO | (0xff & addr)); |
| cx_clear(MC417_RWD, SP2_ADLO); |
| cx_write(MC417_RWD, SP2_CTRL_OFF | |
| SP2_ADHI | (0xff & (addr >> 8))); |
| cx_clear(MC417_RWD, SP2_ADHI); |
| |
| if (read) |
| /* data in */ |
| cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA); |
| else |
| /* data out */ |
| cx_write(MC417_RWD, SP2_CTRL_OFF | data); |
| |
| /* chip select 0 */ |
| cx_clear(MC417_RWD, SP2_CS0); |
| |
| /* read/write */ |
| cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR); |
| |
| /* wait for a maximum of 1 msec */ |
| timeout = jiffies + msecs_to_jiffies(1); |
| while (!time_after(jiffies, timeout)) { |
| tmp = cx_read(MC417_RWD); |
| if ((tmp & SP2_ACK) == 0) |
| break; |
| usleep_range(50, 100); |
| } |
| |
| cx_set(MC417_RWD, SP2_CTRL_OFF); |
| *mem = tmp & 0xff; |
| |
| mutex_unlock(&dev->gpio_lock); |
| |
| if (!read) { |
| if (*mem < 0) { |
| ret = -EREMOTEIO; |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct cx23885_tsport *port = fe->dvb->priv; |
| struct cx23885_dev *dev = port->dev; |
| |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| switch (p->modulation) { |
| case VSB_8: |
| cx23885_gpio_clear(dev, GPIO_5); |
| break; |
| case QAM_64: |
| case QAM_256: |
| default: |
| cx23885_gpio_set(dev, GPIO_5); |
| break; |
| } |
| break; |
| case CX23885_BOARD_MYGICA_X8506: |
| case CX23885_BOARD_MYGICA_X8507: |
| case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| /* Select Digital TV */ |
| cx23885_gpio_set(dev, GPIO_0); |
| break; |
| } |
| |
| /* Call the real set_frontend */ |
| if (port->set_frontend) |
| return port->set_frontend(fe); |
| |
| return 0; |
| } |
| |
| static void cx23885_set_frontend_hook(struct cx23885_tsport *port, |
| struct dvb_frontend *fe) |
| { |
| port->set_frontend = fe->ops.set_frontend; |
| fe->ops.set_frontend = cx23885_dvb_set_frontend; |
| } |
| |
| static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { |
| .prod = LGS8GXX_PROD_LGS8G75, |
| .demod_address = 0x19, |
| .serial_ts = 0, |
| .ts_clk_pol = 1, |
| .ts_clk_gated = 1, |
| .if_clk_freq = 30400, /* 30.4 MHz */ |
| .if_freq = 6500, /* 6.50 MHz */ |
| .if_neg_center = 1, |
| .ext_adc = 0, |
| .adc_signed = 1, |
| .adc_vpp = 2, /* 1.6 Vpp */ |
| .if_neg_edge = 1, |
| }; |
| |
| static struct xc5000_config magicpro_prohdtve2_xc5000_config = { |
| .i2c_address = 0x61, |
| .if_khz = 6500, |
| }; |
| |
| static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = { |
| .prod = ATBM8830_PROD_8830, |
| .demod_address = 0x44, |
| .serial_ts = 0, |
| .ts_sampling_edge = 1, |
| .ts_clk_gated = 0, |
| .osc_clk_freq = 30400, /* in kHz */ |
| .if_freq = 0, /* zero IF */ |
| .zif_swap_iq = 1, |
| .agc_min = 0x2E, |
| .agc_max = 0xFF, |
| .agc_hold_loop = 0, |
| }; |
| |
| static struct max2165_config mygic_x8558pro_max2165_cfg1 = { |
| .i2c_address = 0x60, |
| .osc_clk = 20 |
| }; |
| |
| static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = { |
| .prod = ATBM8830_PROD_8830, |
| .demod_address = 0x44, |
| .serial_ts = 1, |
| .ts_sampling_edge = 1, |
| .ts_clk_gated = 0, |
| .osc_clk_freq = 30400, /* in kHz */ |
| .if_freq = 0, /* zero IF */ |
| .zif_swap_iq = 1, |
| .agc_min = 0x2E, |
| .agc_max = 0xFF, |
| .agc_hold_loop = 0, |
| }; |
| |
| static struct max2165_config mygic_x8558pro_max2165_cfg2 = { |
| .i2c_address = 0x60, |
| .osc_clk = 20 |
| }; |
| static struct stv0367_config netup_stv0367_config[] = { |
| { |
| .demod_address = 0x1c, |
| .xtal = 27000000, |
| .if_khz = 4500, |
| .if_iq_mode = 0, |
| .ts_mode = 1, |
| .clk_pol = 0, |
| }, { |
| .demod_address = 0x1d, |
| .xtal = 27000000, |
| .if_khz = 4500, |
| .if_iq_mode = 0, |
| .ts_mode = 1, |
| .clk_pol = 0, |
| }, |
| }; |
| |
| static struct xc5000_config netup_xc5000_config[] = { |
| { |
| .i2c_address = 0x61, |
| .if_khz = 4500, |
| }, { |
| .i2c_address = 0x64, |
| .if_khz = 4500, |
| }, |
| }; |
| |
| static struct drxk_config terratec_drxk_config[] = { |
| { |
| .adr = 0x29, |
| .no_i2c_bridge = 1, |
| }, { |
| .adr = 0x2a, |
| .no_i2c_bridge = 1, |
| }, |
| }; |
| |
| static struct mt2063_config terratec_mt2063_config[] = { |
| { |
| .tuner_address = 0x60, |
| }, { |
| .tuner_address = 0x67, |
| }, |
| }; |
| |
| static const struct tda10071_config hauppauge_tda10071_config = { |
| .demod_i2c_addr = 0x05, |
| .tuner_i2c_addr = 0x54, |
| .i2c_wr_max = 64, |
| .ts_mode = TDA10071_TS_SERIAL, |
| .spec_inv = 0, |
| .xtal = 40444000, /* 40.444 MHz */ |
| .pll_multiplier = 20, |
| }; |
| |
| static const struct a8293_config hauppauge_a8293_config = { |
| .i2c_addr = 0x0b, |
| }; |
| |
| static const struct si2165_config hauppauge_hvr4400_si2165_config = { |
| .i2c_addr = 0x64, |
| .chip_mode = SI2165_MODE_PLL_XTAL, |
| .ref_freq_Hz = 16000000, |
| }; |
| |
| static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = { |
| .i2c_addr = 0x68, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .clock_out = 0, |
| .ts_mode = M88DS3103_TS_PARALLEL, |
| .ts_clk = 16000, |
| .ts_clk_pol = 1, |
| .lnb_en_pol = 1, |
| .lnb_hv_pol = 0, |
| .agc = 0x99, |
| }; |
| |
| static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = { |
| .i2c_addr = 0x68, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .clock_out = 0, |
| .ts_mode = M88DS3103_TS_CI, |
| .ts_clk = 10000, |
| .ts_clk_pol = 1, |
| .lnb_en_pol = 1, |
| .lnb_hv_pol = 0, |
| .agc = 0x99, |
| }; |
| |
| static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = { |
| .i2c_addr = 0x68, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .clock_out = 0, |
| .ts_mode = M88DS3103_TS_SERIAL, |
| .ts_clk = 96000, |
| .ts_clk_pol = 0, |
| .lnb_en_pol = 1, |
| .lnb_hv_pol = 0, |
| .agc = 0x99, |
| }; |
| |
| static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = { |
| .i2c_addr = 0x69, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .ts_mode = M88DS3103_TS_PARALLEL, |
| .ts_clk = 16000, |
| .ts_clk_pol = 1, |
| .agc = 0x99, |
| }; |
| |
| static int netup_altera_fpga_rw(void *device, int flag, int data, int read) |
| { |
| struct cx23885_dev *dev = (struct cx23885_dev *)device; |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| uint32_t mem = 0; |
| |
| mem = cx_read(MC417_RWD); |
| if (read) |
| cx_set(MC417_OEN, ALT_DATA); |
| else { |
| cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */ |
| mem &= ~ALT_DATA; |
| mem |= (data & ALT_DATA); |
| } |
| |
| if (flag) |
| mem |= ALT_AD_RG; |
| else |
| mem &= ~ALT_AD_RG; |
| |
| mem &= ~ALT_CS; |
| if (read) |
| mem = (mem & ~ALT_RD) | ALT_WR; |
| else |
| mem = (mem & ~ALT_WR) | ALT_RD; |
| |
| cx_write(MC417_RWD, mem); /* start RW cycle */ |
| |
| for (;;) { |
| mem = cx_read(MC417_RWD); |
| if ((mem & ALT_RDY) == 0) |
| break; |
| if (time_after(jiffies, timeout)) |
| break; |
| udelay(1); |
| } |
| |
| cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); |
| if (read) |
| return mem & ALT_DATA; |
| |
| return 0; |
| }; |
| |
| static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) |
| { |
| struct dib7000p_ops *dib7000p_ops = fe->sec_priv; |
| |
| return dib7000p_ops->set_gpio(fe, 8, 0, !onoff); |
| } |
| |
| static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| return 0; |
| } |
| |
| static struct dib0070_config dib7070p_dib0070_config = { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| .freq_offset_khz_vhf = 550, |
| /* .flip_chip = 1, */ |
| }; |
| |
| /* DIB7070 generic */ |
| static struct dibx000_agc_config dib7070_agc_config = { |
| .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| |
| /* |
| * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 |
| */ |
| .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | |
| (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| .inv_gain = 600, |
| .time_stabiliz = 10, |
| .alpha_level = 0, |
| .thlock = 118, |
| .wbd_inv = 0, |
| .wbd_ref = 3530, |
| .wbd_sel = 1, |
| .wbd_alpha = 5, |
| .agc1_max = 65535, |
| .agc1_min = 0, |
| .agc2_max = 65535, |
| .agc2_min = 0, |
| .agc1_pt1 = 0, |
| .agc1_pt2 = 40, |
| .agc1_pt3 = 183, |
| .agc1_slope1 = 206, |
| .agc1_slope2 = 255, |
| .agc2_pt1 = 72, |
| .agc2_pt2 = 152, |
| .agc2_slope1 = 88, |
| .agc2_slope2 = 90, |
| .alpha_mant = 17, |
| .alpha_exp = 27, |
| .beta_mant = 23, |
| .beta_exp = 51, |
| .perform_agc_softsplit = 0, |
| }; |
| |
| static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { |
| .internal = 60000, |
| .sampling = 15000, |
| .pll_prediv = 1, |
| .pll_ratio = 20, |
| .pll_range = 3, |
| .pll_reset = 1, |
| .pll_bypass = 0, |
| .enable_refdiv = 0, |
| .bypclk_div = 0, |
| .IO_CLK_en_core = 1, |
| .ADClkSrc = 1, |
| .modulo = 2, |
| /* refsel, sel, freq_15k */ |
| .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), |
| .ifreq = (0 << 25) | 0, |
| .timf = 20452225, |
| .xtal_hz = 12000000, |
| }; |
| |
| static struct dib7000p_config dib7070p_dib7000p_config = { |
| /* .output_mode = OUTMODE_MPEG2_FIFO, */ |
| .output_mode = OUTMODE_MPEG2_SERIAL, |
| /* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */ |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */ |
| .gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */ |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }; |
| |
| static int dvb_register_ci_mac(struct cx23885_tsport *port) |
| { |
| struct cx23885_dev *dev = port->dev; |
| struct i2c_client *client_ci = NULL; |
| struct vb2_dvb_frontend *fe0; |
| |
| fe0 = vb2_dvb_get_frontend(&port->frontends, 1); |
| if (!fe0) |
| return -EINVAL; |
| |
| switch (dev->board) { |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: { |
| static struct netup_card_info cinfo; |
| |
| netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); |
| memcpy(port->frontends.adapter.proposed_mac, |
| cinfo.port[port->nr - 1].mac, 6); |
| printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n", |
| port->nr, port->frontends.adapter.proposed_mac); |
| |
| netup_ci_init(port); |
| return 0; |
| } |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { |
| struct altera_ci_config netup_ci_cfg = { |
| .dev = dev,/* magic number to identify*/ |
| .adapter = &port->frontends.adapter,/* for CI */ |
| .demux = &fe0->dvb.demux,/* for hw pid filter */ |
| .fpga_rw = netup_altera_fpga_rw, |
| }; |
| |
| altera_ci_init(&netup_ci_cfg, port->nr); |
| return 0; |
| } |
| case CX23885_BOARD_TEVII_S470: { |
| u8 eeprom[256]; /* 24C02 i2c eeprom */ |
| |
| if (port->nr != 1) |
| return 0; |
| |
| /* Read entire EEPROM */ |
| dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom)); |
| printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0); |
| memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6); |
| return 0; |
| } |
| case CX23885_BOARD_DVBSKY_T9580: |
| case CX23885_BOARD_DVBSKY_S950: |
| case CX23885_BOARD_DVBSKY_S952: |
| case CX23885_BOARD_DVBSKY_T982: { |
| u8 eeprom[256]; /* 24C02 i2c eeprom */ |
| |
| if (port->nr > 2) |
| return 0; |
| |
| /* Read entire EEPROM */ |
| dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, |
| sizeof(eeprom)); |
| printk(KERN_INFO "%s port %d MAC address: %pM\n", |
| cx23885_boards[dev->board].name, port->nr, |
| eeprom + 0xc0 + (port->nr-1) * 8); |
| memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 + |
| (port->nr-1) * 8, 6); |
| return 0; |
| } |
| case CX23885_BOARD_DVBSKY_S950C: |
| case CX23885_BOARD_DVBSKY_T980C: |
| case CX23885_BOARD_TT_CT2_4500_CI: { |
| u8 eeprom[256]; /* 24C02 i2c eeprom */ |
| struct sp2_config sp2_config; |
| struct i2c_board_info info; |
| struct cx23885_i2c *i2c_bus2 = &dev->i2c_bus[1]; |
| |
| /* attach CI */ |
| memset(&sp2_config, 0, sizeof(sp2_config)); |
| sp2_config.dvb_adap = &port->frontends.adapter; |
| sp2_config.priv = port; |
| sp2_config.ci_control = cx23885_sp2_ci_ctrl; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "sp2", I2C_NAME_SIZE); |
| info.addr = 0x40; |
| info.platform_data = &sp2_config; |
| request_module(info.type); |
| client_ci = i2c_new_device(&i2c_bus2->i2c_adap, &info); |
| if (client_ci == NULL || client_ci->dev.driver == NULL) |
| return -ENODEV; |
| if (!try_module_get(client_ci->dev.driver->owner)) { |
| i2c_unregister_device(client_ci); |
| return -ENODEV; |
| } |
| port->i2c_client_ci = client_ci; |
| |
| if (port->nr != 1) |
| return 0; |
| |
| /* Read entire EEPROM */ |
| dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, |
| sizeof(eeprom)); |
| printk(KERN_INFO "%s MAC address: %pM\n", |
| cx23885_boards[dev->board].name, eeprom + 0xc0); |
| memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6); |
| return 0; |
| } |
| } |
| return 0; |
| } |
| |
| static int dvb_register(struct cx23885_tsport *port) |
| { |
| struct dib7000p_ops dib7000p_ops; |
| struct cx23885_dev *dev = port->dev; |
| struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; |
| struct vb2_dvb_frontend *fe0, *fe1 = NULL; |
| struct si2168_config si2168_config; |
| struct si2157_config si2157_config; |
| struct ts2020_config ts2020_config; |
| struct i2c_board_info info; |
| struct i2c_adapter *adapter; |
| struct i2c_client *client_demod = NULL, *client_tuner = NULL; |
| const struct m88ds3103_config *p_m88ds3103_config = NULL; |
| int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL; |
| int mfe_shared = 0; /* bus not shared by default */ |
| int ret; |
| |
| /* Get the first frontend */ |
| fe0 = vb2_dvb_get_frontend(&port->frontends, 1); |
| if (!fe0) |
| return -EINVAL; |
| |
| /* init struct vb2_dvb */ |
| fe0->dvb.name = dev->name; |
| |
| /* multi-frontend gate control is undefined or defaults to fe0 */ |
| port->frontends.gate = 0; |
| |
| /* Sets the gate control callback to be used by i2c command calls */ |
| port->gate_ctrl = cx23885_dvb_gate_ctrl; |
| |
| /* init frontend */ |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &hauppauge_generic_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(mt2131_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &hauppauge_generic_tunerconfig, 0); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(lgdt3305_attach, |
| &hauppauge_lgdt3305_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_hvr127x_config); |
| if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275) |
| cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| &hcw_s5h1411_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_tda18271_config); |
| |
| tda18271_attach(&dev->ts1.analog_fe, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_tda18271_config); |
| |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| i2c_bus = &dev->i2c_bus[0]; |
| switch (alt_tuner) { |
| case 1: |
| fe0->dvb.frontend = |
| dvb_attach(s5h1409_attach, |
| &hauppauge_ezqam_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| dvb_attach(tda829x_attach, fe0->dvb.frontend, |
| &dev->i2c_bus[1].i2c_adap, 0x42, |
| &tda829x_no_probe); |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_tda18271_config); |
| break; |
| case 0: |
| default: |
| fe0->dvb.frontend = |
| dvb_attach(s5h1409_attach, |
| &hauppauge_generic_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(mt2131_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &hauppauge_generic_tunerconfig, 0); |
| } |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1800lp: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &hauppauge_hvr1800lp_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(mt2131_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &hauppauge_generic_tunerconfig, 0); |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(lgdt330x_attach, |
| &fusionhdtv_5_express, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, 0x61, |
| TUNER_LG_TDVS_H06XF); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| i2c_bus = &dev->i2c_bus[1]; |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &hauppauge_hvr1500q_config, |
| &dev->i2c_bus[0].i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &hauppauge_hvr1500q_tunerconfig); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| i2c_bus = &dev->i2c_bus[1]; |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &hauppauge_hvr1500_config, |
| &dev->i2c_bus[0].i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &i2c_bus->i2c_adap, |
| .i2c_addr = 0x61, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_OREN538, |
| }; |
| |
| fe = dvb_attach(xc2028_attach, |
| fe0->dvb.frontend, &cfg); |
| if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| } |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1200: |
| case CX23885_BOARD_HAUPPAUGE_HVR1700: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(tda10048_attach, |
| &hauppauge_hvr1200_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(tda829x_attach, fe0->dvb.frontend, |
| &dev->i2c_bus[1].i2c_adap, 0x42, |
| &tda829x_no_probe); |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_hvr1200_tuner_config); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1210: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(tda10048_attach, |
| &hauppauge_hvr1210_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_hvr1210_tuner_config); |
| } |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| i2c_bus = &dev->i2c_bus[0]; |
| |
| if (!dvb_attach(dib7000p_attach, &dib7000p_ops)) |
| return -ENODEV; |
| |
| fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, |
| 0x12, &hauppauge_hvr1400_dib7000_config); |
| if (fe0->dvb.frontend != NULL) { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &dev->i2c_bus[1].i2c_adap, |
| .i2c_addr = 0x64, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC3028L_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_DIBCOM52, |
| /* This is true for all demods with |
| v36 firmware? */ |
| .type = XC2028_D2633, |
| }; |
| |
| fe = dvb_attach(xc2028_attach, |
| fe0->dvb.frontend, &cfg); |
| if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| } |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: |
| i2c_bus = &dev->i2c_bus[port->nr - 1]; |
| |
| fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| &dvico_s5h1409_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| &dvico_s5h1411_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) |
| dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &dvico_xc5000_tunerconfig); |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { |
| i2c_bus = &dev->i2c_bus[port->nr - 1]; |
| |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_xc3028, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &i2c_bus->i2c_adap, |
| .i2c_addr = 0x61, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_ZARLINK456, |
| }; |
| |
| fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, |
| &cfg); |
| if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| } |
| break; |
| } |
| case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: { |
| i2c_bus = &dev->i2c_bus[port->nr - 1]; |
| /* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */ |
| /* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */ |
| |
| if (!dvb_attach(dib7000p_attach, &dib7000p_ops)) |
| return -ENODEV; |
| |
| if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) { |
| printk(KERN_WARNING "Unable to enumerate dib7000p\n"); |
| return -ENODEV; |
| } |
| fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config); |
| if (fe0->dvb.frontend != NULL) { |
| struct i2c_adapter *tun_i2c; |
| |
| fe0->dvb.frontend->sec_priv = kmalloc(sizeof(dib7000p_ops), GFP_KERNEL); |
| memcpy(fe0->dvb.frontend->sec_priv, &dib7000p_ops, sizeof(dib7000p_ops)); |
| tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1); |
| if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config)) |
| return -ENODEV; |
| } |
| break; |
| } |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E800: |
| i2c_bus = &dev->i2c_bus[0]; |
| |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_xc3028, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &dev->i2c_bus[1].i2c_adap, |
| .i2c_addr = 0x61, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_ZARLINK456, |
| }; |
| |
| fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, |
| &cfg); |
| if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| } |
| break; |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: |
| i2c_bus = &dev->i2c_bus[0]; |
| |
| fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| &dvico_fusionhdtv_xc3028, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| struct dvb_frontend *fe; |
| struct xc4000_config cfg = { |
| .i2c_address = 0x61, |
| .default_pm = 0, |
| .dvb_amplitude = 134, |
| .set_smoothedcvbs = 1, |
| .if_khz = 4560 |
| }; |
| |
| fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, |
| &dev->i2c_bus[1].i2c_adap, &cfg); |
| if (!fe) { |
| printk(KERN_ERR "%s/2: xc4000 attach failed\n", |
| dev->name); |
| goto frontend_detach; |
| } |
| } |
| break; |
| case CX23885_BOARD_TBS_6920: |
| i2c_bus = &dev->i2c_bus[1]; |
| |
| fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| &tbs_cx24116_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) |
| fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; |
| |
| break; |
| case CX23885_BOARD_TBS_6980: |
| case CX23885_BOARD_TBS_6981: |
| i2c_bus = &dev->i2c_bus[1]; |
| |
| switch (port->nr) { |
| /* PORT B */ |
| case 1: |
| fe0->dvb.frontend = dvb_attach(cx24117_attach, |
| &tbs_cx24117_config, |
| &i2c_bus->i2c_adap); |
| break; |
| /* PORT C */ |
| case 2: |
| fe0->dvb.frontend = dvb_attach(cx24117_attach, |
| &tbs_cx24117_config, |
| &i2c_bus->i2c_adap); |
| break; |
| } |
| break; |
| case CX23885_BOARD_TEVII_S470: |
| i2c_bus = &dev->i2c_bus[1]; |
| |
| fe0->dvb.frontend = dvb_attach(ds3000_attach, |
| &tevii_ds3000_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| dvb_attach(ts2020_attach, fe0->dvb.frontend, |
| &tevii_ts2020_config, &i2c_bus->i2c_adap); |
| fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; |
| } |
| |
| break; |
| case CX23885_BOARD_DVBWORLD_2005: |
| i2c_bus = &dev->i2c_bus[1]; |
| |
| fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| &dvbworld_cx24116_config, |
| &i2c_bus->i2c_adap); |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| i2c_bus = &dev->i2c_bus[0]; |
| switch (port->nr) { |
| /* port B */ |
| case 1: |
| fe0->dvb.frontend = dvb_attach(stv0900_attach, |
| &netup_stv0900_config, |
| &i2c_bus->i2c_adap, 0); |
| if (fe0->dvb.frontend != NULL) { |
| if (dvb_attach(stv6110_attach, |
| fe0->dvb.frontend, |
| &netup_stv6110_tunerconfig_a, |
| &i2c_bus->i2c_adap)) { |
| if (!dvb_attach(lnbh24_attach, |
| fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| LNBH24_PCL | LNBH24_TTX, |
| LNBH24_TEN, 0x09)) |
| printk(KERN_ERR |
| "No LNBH24 found!\n"); |
| |
| } |
| } |
| break; |
| /* port C */ |
| case 2: |
| fe0->dvb.frontend = dvb_attach(stv0900_attach, |
| &netup_stv0900_config, |
| &i2c_bus->i2c_adap, 1); |
| if (fe0->dvb.frontend != NULL) { |
| if (dvb_attach(stv6110_attach, |
| fe0->dvb.frontend, |
| &netup_stv6110_tunerconfig_b, |
| &i2c_bus->i2c_adap)) { |
| if (!dvb_attach(lnbh24_attach, |
| fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| LNBH24_PCL | LNBH24_TTX, |
| LNBH24_TEN, 0x0a)) |
| printk(KERN_ERR |
| "No LNBH24 found!\n"); |
| |
| } |
| } |
| break; |
| } |
| break; |
| case CX23885_BOARD_MYGICA_X8506: |
| i2c_bus = &dev->i2c_bus[0]; |
| i2c_bus2 = &dev->i2c_bus[1]; |
| fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, |
| &mygica_x8506_lgs8gl5_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config); |
| cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| break; |
| case CX23885_BOARD_MYGICA_X8507: |
| i2c_bus = &dev->i2c_bus[0]; |
| i2c_bus2 = &dev->i2c_bus[1]; |
| fe0->dvb.frontend = dvb_attach(mb86a20s_attach, |
| &mygica_x8507_mb86a20s_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &i2c_bus2->i2c_adap, |
| &mygica_x8507_xc5000_config); |
| cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| break; |
| case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| i2c_bus = &dev->i2c_bus[0]; |
| i2c_bus2 = &dev->i2c_bus[1]; |
| fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, |
| &magicpro_prohdtve2_lgs8g75_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &i2c_bus2->i2c_adap, |
| &magicpro_prohdtve2_xc5000_config); |
| cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| &hcw_s5h1411_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[0].i2c_adap, |
| &hauppauge_tda18271_config); |
| |
| tda18271_attach(&dev->ts1.analog_fe, |
| 0x60, &dev->i2c_bus[1].i2c_adap, |
| &hauppauge_tda18271_config); |
| |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| &hcw_s5h1411_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 0x60, &dev->i2c_bus[0].i2c_adap, |
| &hauppauge_tda18271_config); |
| break; |
| case CX23885_BOARD_MYGICA_X8558PRO: |
| switch (port->nr) { |
| /* port B */ |
| case 1: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(atbm8830_attach, |
| &mygica_x8558pro_atbm8830_cfg1, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(max2165_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &mygic_x8558pro_max2165_cfg1); |
| break; |
| /* port C */ |
| case 2: |
| i2c_bus = &dev->i2c_bus[1]; |
| fe0->dvb.frontend = dvb_attach(atbm8830_attach, |
| &mygica_x8558pro_atbm8830_cfg2, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(max2165_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &mygic_x8558pro_max2165_cfg2); |
| } |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| i2c_bus = &dev->i2c_bus[0]; |
| mfe_shared = 1;/* MFE */ |
| port->frontends.gate = 0;/* not clear for me yet */ |
| /* ports B, C */ |
| /* MFE frontend 1 DVB-T */ |
| fe0->dvb.frontend = dvb_attach(stv0367ter_attach, |
| &netup_stv0367_config[port->nr - 1], |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &netup_xc5000_config[port->nr - 1])) |
| goto frontend_detach; |
| /* load xc5000 firmware */ |
| fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend); |
| |
| /* MFE frontend 2 */ |
| fe1 = vb2_dvb_get_frontend(&port->frontends, 2); |
| if (fe1 == NULL) |
| goto frontend_detach; |
| /* DVB-C init */ |
| fe1->dvb.frontend = dvb_attach(stv0367cab_attach, |
| &netup_stv0367_config[port->nr - 1], |
| &i2c_bus->i2c_adap); |
| if (fe1->dvb.frontend == NULL) |
| break; |
| |
| fe1->dvb.frontend->id = 1; |
| if (NULL == dvb_attach(xc5000_attach, |
| fe1->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &netup_xc5000_config[port->nr - 1])) |
| goto frontend_detach; |
| break; |
| case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: |
| i2c_bus = &dev->i2c_bus[0]; |
| i2c_bus2 = &dev->i2c_bus[1]; |
| |
| switch (port->nr) { |
| /* port b */ |
| case 1: |
| fe0->dvb.frontend = dvb_attach(drxk_attach, |
| &terratec_drxk_config[0], |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| if (!dvb_attach(mt2063_attach, |
| fe0->dvb.frontend, |
| &terratec_mt2063_config[0], |
| &i2c_bus2->i2c_adap)) |
| goto frontend_detach; |
| break; |
| /* port c */ |
| case 2: |
| fe0->dvb.frontend = dvb_attach(drxk_attach, |
| &terratec_drxk_config[1], |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| if (!dvb_attach(mt2063_attach, |
| fe0->dvb.frontend, |
| &terratec_mt2063_config[1], |
| &i2c_bus2->i2c_adap)) |
| goto frontend_detach; |
| break; |
| } |
| break; |
| case CX23885_BOARD_TEVII_S471: |
| i2c_bus = &dev->i2c_bus[1]; |
| |
| fe0->dvb.frontend = dvb_attach(ds3000_attach, |
| &tevii_ds3000_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| dvb_attach(ts2020_attach, fe0->dvb.frontend, |
| &tevii_ts2020_config, &i2c_bus->i2c_adap); |
| break; |
| case CX23885_BOARD_PROF_8000: |
| i2c_bus = &dev->i2c_bus[0]; |
| |
| fe0->dvb.frontend = dvb_attach(stv090x_attach, |
| &prof_8000_stv090x_config, |
| &i2c_bus->i2c_adap, |
| STV090x_DEMODULATOR_0); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| if (!dvb_attach(stb6100_attach, |
| fe0->dvb.frontend, |
| &prof_8000_stb6100_config, |
| &i2c_bus->i2c_adap)) |
| goto frontend_detach; |
| |
| fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR4400: |
| i2c_bus = &dev->i2c_bus[0]; |
| i2c_bus2 = &dev->i2c_bus[1]; |
| switch (port->nr) { |
| /* port b */ |
| case 1: |
| fe0->dvb.frontend = dvb_attach(tda10071_attach, |
| &hauppauge_tda10071_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| if (!dvb_attach(a8293_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &hauppauge_a8293_config)) |
| goto frontend_detach; |
| break; |
| /* port c */ |
| case 2: |
| fe0->dvb.frontend = dvb_attach(si2165_attach, |
| &hauppauge_hvr4400_si2165_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
| if (!dvb_attach(tda18271_attach, |
| fe0->dvb.frontend, |
| 0x60, &i2c_bus2->i2c_adap, |
| &hauppauge_hvr4400_tuner_config)) |
| goto frontend_detach; |
| break; |
| } |
| break; |
| case CX23885_BOARD_HAUPPAUGE_STARBURST: |
| i2c_bus = &dev->i2c_bus[0]; |
| fe0->dvb.frontend = dvb_attach(tda10071_attach, |
| &hauppauge_tda10071_config, |
| &i2c_bus->i2c_adap); |
| if (fe0->dvb.frontend != NULL) { |
| dvb_attach(a8293_attach, fe0->dvb.frontend, |
| &i2c_bus->i2c_adap, |
| &hauppauge_a8293_config); |
| } |
| break; |
| case CX23885_BOARD_DVBSKY_T9580: |
| case CX23885_BOARD_DVBSKY_S950: |
| i2c_bus = &dev->i2c_bus[0]; |
| i2c_bus2 = &dev->i2c_bus[1]; |
| switch (port->nr) { |
| /* port b - satellite */ |
| case 1: |
| /* attach frontend */ |
| fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| &dvbsky_t9580_m88ds3103_config, |
| &i2c_bus2->i2c_adap, &adapter); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| /* attach tuner */ |
| memset(&ts2020_config, 0, sizeof(ts2020_config)); |
| ts2020_config.fe = fe0->dvb.frontend; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &ts2020_config; |
| request_module(info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (client_tuner == NULL || |
| client_tuner->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| fe0->dvb.frontend->ops.read_signal_strength = |
| fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| |
| /* |
| * for setting the voltage we need to set GPIOs on |
| * the card. |
| */ |
| port->fe_set_voltage = |
| fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = |
| dvbsky_t9580_set_voltage; |
| |
| port->i2c_client_tuner = client_tuner; |
| |
| break; |
| /* port c - terrestrial/cable */ |
| case 2: |
| /* attach frontend */ |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &fe0->dvb.frontend; |
| si2168_config.ts_mode = SI2168_TS_SERIAL; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| info.addr = 0x64; |
| info.platform_data = &si2168_config; |
| request_module(info.type); |
| client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| if (client_demod == NULL || |
| client_demod->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_demod->dev.driver->owner)) { |
| i2c_unregister_device(client_demod); |
| goto frontend_detach; |
| } |
| port->i2c_client_demod = client_demod; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = fe0->dvb.frontend; |
| si2157_config.if_port = 1; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| request_module(info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (client_tuner == NULL || |
| client_tuner->dev.driver == NULL) |
| goto frontend_detach; |
| |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| port->i2c_client_tuner = client_tuner; |
| break; |
| } |
| break; |
| case CX23885_BOARD_DVBSKY_T980C: |
| case CX23885_BOARD_TT_CT2_4500_CI: |
| i2c_bus = &dev->i2c_bus[1]; |
| i2c_bus2 = &dev->i2c_bus[0]; |
| |
| /* attach frontend */ |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &fe0->dvb.frontend; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| info.addr = 0x64; |
| info.platform_data = &si2168_config; |
| request_module(info.type); |
| client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| if (client_demod == NULL || client_demod->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_demod->dev.driver->owner)) { |
| i2c_unregister_device(client_demod); |
| goto frontend_detach; |
| } |
| port->i2c_client_demod = client_demod; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = fe0->dvb.frontend; |
| si2157_config.if_port = 1; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| request_module(info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (client_tuner == NULL || |
| client_tuner->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| port->i2c_client_tuner = client_tuner; |
| break; |
| case CX23885_BOARD_DVBSKY_S950C: |
| i2c_bus = &dev->i2c_bus[1]; |
| i2c_bus2 = &dev->i2c_bus[0]; |
| |
| /* attach frontend */ |
| fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| &dvbsky_s950c_m88ds3103_config, |
| &i2c_bus->i2c_adap, &adapter); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| /* attach tuner */ |
| memset(&ts2020_config, 0, sizeof(ts2020_config)); |
| ts2020_config.fe = fe0->dvb.frontend; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &ts2020_config; |
| request_module(info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (client_tuner == NULL || client_tuner->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| fe0->dvb.frontend->ops.read_signal_strength = |
| fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| |
| port->i2c_client_tuner = client_tuner; |
| break; |
| case CX23885_BOARD_DVBSKY_S952: |
| switch (port->nr) { |
| /* port b */ |
| case 1: |
| i2c_bus = &dev->i2c_bus[1]; |
| p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config; |
| p_set_voltage = dvbsky_t9580_set_voltage; |
| break; |
| /* port c */ |
| case 2: |
| i2c_bus = &dev->i2c_bus[0]; |
| p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config; |
| p_set_voltage = dvbsky_s952_portc_set_voltage; |
| break; |
| } |
| |
| /* attach frontend */ |
| fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| p_m88ds3103_config, |
| &i2c_bus->i2c_adap, &adapter); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| /* attach tuner */ |
| memset(&ts2020_config, 0, sizeof(ts2020_config)); |
| ts2020_config.fe = fe0->dvb.frontend; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &ts2020_config; |
| request_module(info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (client_tuner == NULL || client_tuner->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| fe0->dvb.frontend->ops.read_signal_strength = |
| fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| |
| /* |
| * for setting the voltage we need to set GPIOs on |
| * the card. |
| */ |
| port->fe_set_voltage = |
| fe0->dvb.frontend->ops.set_voltage; |
| fe0->dvb.frontend->ops.set_voltage = p_set_voltage; |
| |
| port->i2c_client_tuner = client_tuner; |
| break; |
| case CX23885_BOARD_DVBSKY_T982: |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| switch (port->nr) { |
| /* port b */ |
| case 1: |
| i2c_bus = &dev->i2c_bus[1]; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| break; |
| /* port c */ |
| case 2: |
| i2c_bus = &dev->i2c_bus[0]; |
| si2168_config.ts_mode = SI2168_TS_SERIAL; |
| break; |
| } |
| |
| /* attach frontend */ |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &fe0->dvb.frontend; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| info.addr = 0x64; |
| info.platform_data = &si2168_config; |
| request_module(info.type); |
| client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| if (client_demod == NULL || client_demod->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_demod->dev.driver->owner)) { |
| i2c_unregister_device(client_demod); |
| goto frontend_detach; |
| } |
| port->i2c_client_demod = client_demod; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = fe0->dvb.frontend; |
| si2157_config.if_port = 1; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| request_module(info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (client_tuner == NULL || |
| client_tuner->dev.driver == NULL) |
| goto frontend_detach; |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| port->i2c_client_tuner = client_tuner; |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR5525: |
| switch (port->nr) { |
| struct m88rs6000t_config m88rs6000t_config; |
| |
| /* port b - satellite */ |
| case 1: |
| /* attach frontend */ |
| fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| &hauppauge_hvr5525_m88ds3103_config, |
| &dev->i2c_bus[0].i2c_adap, &adapter); |
| if (fe0->dvb.frontend == NULL) |
| break; |
| |
| /* attach SEC */ |
| if (!dvb_attach(a8293_attach, fe0->dvb.frontend, |
| &dev->i2c_bus[0].i2c_adap, |
| &hauppauge_a8293_config)) |
| goto frontend_detach; |
| |
| /* attach tuner */ |
| memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config)); |
| m88rs6000t_config.fe = fe0->dvb.frontend; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "m88rs6000t", I2C_NAME_SIZE); |
| info.addr = 0x21; |
| info.platform_data = &m88rs6000t_config; |
| request_module("%s", info.type); |
| client_tuner = i2c_new_device(adapter, &info); |
| if (!client_tuner || !client_tuner->dev.driver) |
| goto frontend_detach; |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| goto frontend_detach; |
| } |
| port->i2c_client_tuner = client_tuner; |
| |
| /* delegate signal strength measurement to tuner */ |
| fe0->dvb.frontend->ops.read_signal_strength = |
| fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| break; |
| /* port c - terrestrial/cable */ |
| case 2: |
| /* attach frontend */ |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &fe0->dvb.frontend; |
| si2168_config.ts_mode = SI2168_TS_SERIAL; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| info.addr = 0x64; |
| info.platform_data = &si2168_config; |
| request_module("%s", info.type); |
| client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info); |
| if (!client_demod || !client_demod->dev.driver) |
| goto frontend_detach; |
| if (!try_module_get(client_demod->dev.driver->owner)) { |
| i2c_unregister_device(client_demod); |
| goto frontend_detach; |
| } |
| port->i2c_client_demod = client_demod; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = fe0->dvb.frontend; |
| si2157_config.if_port = 1; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| request_module("%s", info.type); |
| client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info); |
| if (!client_tuner || !client_tuner->dev.driver) { |
| module_put(client_demod->dev.driver->owner); |
| i2c_unregister_device(client_demod); |
| port->i2c_client_demod = NULL; |
| goto frontend_detach; |
| } |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| i2c_unregister_device(client_tuner); |
| module_put(client_demod->dev.driver->owner); |
| i2c_unregister_device(client_demod); |
| port->i2c_client_demod = NULL; |
| goto frontend_detach; |
| } |
| port->i2c_client_tuner = client_tuner; |
| break; |
| } |
| break; |
| default: |
| printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " |
| " isn't supported yet\n", |
| dev->name); |
| break; |
| } |
| |
| if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) { |
| printk(KERN_ERR "%s: frontend initialization failed\n", |
| dev->name); |
| goto frontend_detach; |
| } |
| |
| /* define general-purpose callback pointer */ |
| fe0->dvb.frontend->callback = cx23885_tuner_callback; |
| if (fe1) |
| fe1->dvb.frontend->callback = cx23885_tuner_callback; |
| #if 0 |
| /* Ensure all frontends negotiate bus access */ |
| fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; |
| if (fe1) |
| fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; |
| #endif |
| |
| /* Put the analog decoder in standby to keep it quiet */ |
| call_all(dev, core, s_power, 0); |
| |
| if (fe0->dvb.frontend->ops.analog_ops.standby) |
| fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); |
| |
| /* register everything */ |
| ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port, |
| &dev->pci->dev, adapter_nr, mfe_shared); |
| if (ret) |
| goto frontend_detach; |
| |
| ret = dvb_register_ci_mac(port); |
| if (ret) |
| goto frontend_detach; |
| |
| return 0; |
| |
| frontend_detach: |
| /* remove I2C client for tuner */ |
| client_tuner = port->i2c_client_tuner; |
| if (client_tuner) { |
| module_put(client_tuner->dev.driver->owner); |
| i2c_unregister_device(client_tuner); |
| port->i2c_client_tuner = NULL; |
| } |
| |
| /* remove I2C client for demodulator */ |
| client_demod = port->i2c_client_demod; |
| if (client_demod) { |
| module_put(client_demod->dev.driver->owner); |
| i2c_unregister_device(client_demod); |
| port->i2c_client_demod = NULL; |
| } |
| |
| port->gate_ctrl = NULL; |
| vb2_dvb_dealloc_frontends(&port->frontends); |
| return -EINVAL; |
| } |
| |
| int cx23885_dvb_register(struct cx23885_tsport *port) |
| { |
| |
| struct vb2_dvb_frontend *fe0; |
| struct cx23885_dev *dev = port->dev; |
| int err, i; |
| |
| /* Here we need to allocate the correct number of frontends, |
| * as reflected in the cards struct. The reality is that currently |
| * no cx23885 boards support this - yet. But, if we don't modify this |
| * code then the second frontend would never be allocated (later) |
| * and fail with error before the attach in dvb_register(). |
| * Without these changes we risk an OOPS later. The changes here |
| * are for safety, and should provide a good foundation for the |
| * future addition of any multi-frontend cx23885 based boards. |
| */ |
| printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, |
| port->num_frontends); |
| |
| for (i = 1; i <= port->num_frontends; i++) { |
| struct vb2_queue *q; |
| |
| if (vb2_dvb_alloc_frontend( |
| &port->frontends, i) == NULL) { |
| printk(KERN_ERR "%s() failed to alloc\n", __func__); |
| return -ENOMEM; |
| } |
| |
| fe0 = vb2_dvb_get_frontend(&port->frontends, i); |
| if (!fe0) |
| return -EINVAL; |
| |
| dprintk(1, "%s\n", __func__); |
| dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n", |
| dev->board, |
| dev->name, |
| dev->pci_bus, |
| dev->pci_slot); |
| |
| err = -ENODEV; |
| |
| /* dvb stuff */ |
| /* We have to init the queue for each frontend on a port. */ |
| printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name); |
| q = &fe0->dvb.dvbq; |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ; |
| q->gfp_flags = GFP_DMA32; |
| q->min_buffers_needed = 2; |
| q->drv_priv = port; |
| q->buf_struct_size = sizeof(struct cx23885_buffer); |
| q->ops = &dvb_qops; |
| q->mem_ops = &vb2_dma_sg_memops; |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->lock = &dev->lock; |
| |
| err = vb2_queue_init(q); |
| if (err < 0) |
| return err; |
| } |
| err = dvb_register(port); |
| if (err != 0) |
| printk(KERN_ERR "%s() dvb_register failed err = %d\n", |
| __func__, err); |
| |
| return err; |
| } |
| |
| int cx23885_dvb_unregister(struct cx23885_tsport *port) |
| { |
| struct vb2_dvb_frontend *fe0; |
| struct i2c_client *client; |
| |
| /* remove I2C client for CI */ |
| client = port->i2c_client_ci; |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| /* remove I2C client for tuner */ |
| client = port->i2c_client_tuner; |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| /* remove I2C client for demodulator */ |
| client = port->i2c_client_demod; |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| fe0 = vb2_dvb_get_frontend(&port->frontends, 1); |
| |
| if (fe0 && fe0->dvb.frontend) |
| vb2_dvb_unregister_bus(&port->frontends); |
| |
| switch (port->dev->board) { |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| netup_ci_exit(port); |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| altera_ci_release(port->dev, port->nr); |
| break; |
| } |
| |
| port->gate_ctrl = NULL; |
| |
| return 0; |
| } |