arch/arm/mach-kirkwood/pcie.c - kernel/msm-4.9 - Gitiles

 /*
  * arch/arm/mach-kirkwood/pcie.c
  *
  * PCIe functions for Marvell Kirkwood SoCs
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */

 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <video/vga.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <mach/bridge-regs.h>
 #include "common.h"

 static void kirkwood_enable_pcie_clk(const char *port)
 {
 	struct clk *clk;

 	clk = clk_get_sys("pcie", port);
 	if (IS_ERR(clk)) {
 		pr_err("PCIE clock %s missing\n", port);
 		return;
 	}
 	clk_prepare_enable(clk);
 	clk_put(clk);
 }

 /* This function is called very early in the boot when probing the
    hardware to determine what we actually are, and what rate tclk is
    ticking at. Hence calling kirkwood_enable_pcie_clk() is not
    possible since the clk tree has not been created yet. */
 void kirkwood_enable_pcie(void)
 {
 	u32 curr = readl(CLOCK_GATING_CTRL);
 	if (!(curr & CGC_PEX0))
 		writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
 }

 void kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
 	kirkwood_enable_pcie();
 	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
 	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
 }

 struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
 	int			irq;
 	struct resource		res;
 };

 static int pcie_port_map[2];
 static int num_pcie_ports;

 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
 	 * Don't go out when trying to access --
 	 * 1. nonexisting device on local bus
 	 * 2. where there's no device connected (no link)
 	 */
 	if (bus == pp->root_bus_nr && dev == 0)
 		return 1;

 	if (!orion_pcie_link_up(pp->base))
 		return 0;

 	if (bus == pp->root_bus_nr && dev != 1)
 		return 0;

 	return 1;
 }


 /*
  * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
  * and then reading the PCIE_CONF_DATA register. Need to make sure these
  * transactions are atomic.
  */

 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
 	struct pci_sys_data *sys = bus->sysdata;
 	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;

 	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}

 	spin_lock_irqsave(&pp->conf_lock, flags);
 	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
 	spin_unlock_irqrestore(&pp->conf_lock, flags);

 	return ret;
 }

 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
 	struct pci_sys_data *sys = bus->sysdata;
 	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;

 	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;

 	spin_lock_irqsave(&pp->conf_lock, flags);
 	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
 	spin_unlock_irqrestore(&pp->conf_lock, flags);

 	return ret;
 }

 static struct pci_ops pcie_ops = {
 	.read = pcie_rd_conf,
 	.write = pcie_wr_conf,
 };

 static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
 	pp->base = PCIE_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE;

 	/*
 	 * IORESOURCE_MEM
 	 */
 	pp->res.name = "PCIe 0 MEM";
 	pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
 	pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
 	pp->res.flags = IORESOURCE_MEM;
 }

 static void __init pcie1_ioresources_init(struct pcie_port *pp)
 {
 	pp->base = PCIE1_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE1;

 	/*
 	 * IORESOURCE_MEM
 	 */
 	pp->res.name = "PCIe 1 MEM";
 	pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
 	pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
 	pp->res.flags = IORESOURCE_MEM;
 }

 static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
 	int index;

 	if (nr >= num_pcie_ports)
 		return 0;

 	index = pcie_port_map[nr];
 	pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);

 	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
 	if (!pp)
 		panic("PCIe: failed to allocate pcie_port data");
 	sys->private_data = pp;
 	pp->root_bus_nr = sys->busnr;
 	spin_lock_init(&pp->conf_lock);

 	switch (index) {
 	case 0:
 		kirkwood_enable_pcie_clk("0");
 		pcie0_ioresources_init(pp);
 		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
 		break;
 	case 1:
 		kirkwood_enable_pcie_clk("1");
 		pcie1_ioresources_init(pp);
 		pci_ioremap_io(SZ_64K * sys->busnr,
 			       KIRKWOOD_PCIE1_IO_PHYS_BASE);
 		break;
 	default:
 		panic("PCIe setup: invalid controller %d", index);
 	}

 	if (request_resource(&iomem_resource, &pp->res))
 		panic("Request PCIe%d Memory resource failed\n", index);

 	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);

 	/*
 	 * Generic PCIe unit setup.
 	 */
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);

 	orion_pcie_setup(pp->base);

 	return 1;
 }

 /*
  * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
  * is operating as a root complex this needs to be switched to
  * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
  * the device. Decoding setup is handled by the orion code.
  */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;

 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
 			dev->resource[i].flags = 0;
 		}
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);

 static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
 	struct pci_sys_data *sys = dev->sysdata;
 	struct pcie_port *pp = sys->private_data;

 	return pp->irq;
 }

 static struct hw_pci kirkwood_pci __initdata = {
 	.setup		= kirkwood_pcie_setup,
 	.map_irq	= kirkwood_pcie_map_irq,
 	.ops            = &pcie_ops,
 };

 static void __init add_pcie_port(int index, void __iomem *base)
 {
 	pcie_port_map[num_pcie_ports++] = index;
 	pr_info("Kirkwood PCIe port %d: link %s\n", index,
 		orion_pcie_link_up(base) ? "up" : "down");
 }

 void __init kirkwood_pcie_init(unsigned int portmask)
 {
 	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;

 	if (portmask & KW_PCIE0)
 		add_pcie_port(0, PCIE_VIRT_BASE);

 	if (portmask & KW_PCIE1)
 		add_pcie_port(1, PCIE1_VIRT_BASE);

 	kirkwood_pci.nr_controllers = num_pcie_ports;
 	pci_common_init(&kirkwood_pci);
 }
	/*
	* arch/arm/mach-kirkwood/pcie.c
	*
	* PCIe functions for Marvell Kirkwood SoCs
	*
	* This file is licensed under the terms of the GNU General Public
	* License version 2. This program is licensed "as is" without any
	* warranty of any kind, whether express or implied.
	*/

	#include <linux/kernel.h>
	#include <linux/pci.h>
	#include <linux/slab.h>
	#include <linux/clk.h>
	#include <video/vga.h>
	#include <asm/irq.h>
	#include <asm/mach/pci.h>
	#include <plat/pcie.h>
	#include <mach/bridge-regs.h>
	#include "common.h"

	static void kirkwood_enable_pcie_clk(const char *port)
	{
	struct clk *clk;

	clk = clk_get_sys("pcie", port);
	if (IS_ERR(clk)) {
	pr_err("PCIE clock %s missing\n", port);
	return;
	}
	clk_prepare_enable(clk);
	clk_put(clk);
	}

	/* This function is called very early in the boot when probing the
	hardware to determine what we actually are, and what rate tclk is
	ticking at. Hence calling kirkwood_enable_pcie_clk() is not
	possible since the clk tree has not been created yet. */
	void kirkwood_enable_pcie(void)
	{
	u32 curr = readl(CLOCK_GATING_CTRL);
	if (!(curr & CGC_PEX0))
	writel(curr \| CGC_PEX0, CLOCK_GATING_CTRL);
	}

	void kirkwood_pcie_id(u32 dev, u32 rev)
	{
	kirkwood_enable_pcie();
	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
	}

	struct pcie_port {
	u8 root_bus_nr;
	void __iomem *base;
	spinlock_t conf_lock;
	int irq;
	struct resource res;
	};

	static int pcie_port_map[2];
	static int num_pcie_ports;

	static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
	{
	/*
	* Don't go out when trying to access --
	* 1. nonexisting device on local bus
	* 2. where there's no device connected (no link)
	*/
	if (bus == pp->root_bus_nr && dev == 0)
	return 1;

	if (!orion_pcie_link_up(pp->base))
	return 0;

	if (bus == pp->root_bus_nr && dev != 1)
	return 0;

	return 1;
	}


	/*
	* PCIe config cycles are done by programming the PCIE_CONF_ADDR register
	* and then reading the PCIE_CONF_DATA register. Need to make sure these
	* transactions are atomic.
	*/

	static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
	int size, u32 *val)
	{
	struct pci_sys_data *sys = bus->sysdata;
	struct pcie_port *pp = sys->private_data;
	unsigned long flags;
	int ret;

	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
	*val = 0xffffffff;
	return PCIBIOS_DEVICE_NOT_FOUND;
	}

	spin_lock_irqsave(&pp->conf_lock, flags);
	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
	spin_unlock_irqrestore(&pp->conf_lock, flags);

	return ret;
	}

	static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
	int where, int size, u32 val)
	{
	struct pci_sys_data *sys = bus->sysdata;
	struct pcie_port *pp = sys->private_data;
	unsigned long flags;
	int ret;

	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
	return PCIBIOS_DEVICE_NOT_FOUND;

	spin_lock_irqsave(&pp->conf_lock, flags);
	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
	spin_unlock_irqrestore(&pp->conf_lock, flags);

	return ret;
	}

	static struct pci_ops pcie_ops = {
	.read = pcie_rd_conf,
	.write = pcie_wr_conf,
	};

	static void __init pcie0_ioresources_init(struct pcie_port *pp)
	{
	pp->base = PCIE_VIRT_BASE;
	pp->irq = IRQ_KIRKWOOD_PCIE;

	/*
	* IORESOURCE_MEM
	*/
	pp->res.name = "PCIe 0 MEM";
	pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
	pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
	pp->res.flags = IORESOURCE_MEM;
	}

	static void __init pcie1_ioresources_init(struct pcie_port *pp)
	{
	pp->base = PCIE1_VIRT_BASE;
	pp->irq = IRQ_KIRKWOOD_PCIE1;

	/*
	* IORESOURCE_MEM
	*/
	pp->res.name = "PCIe 1 MEM";
	pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
	pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
	pp->res.flags = IORESOURCE_MEM;
	}

	static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
	{
	struct pcie_port *pp;
	int index;

	if (nr >= num_pcie_ports)
	return 0;

	index = pcie_port_map[nr];
	pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);

	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
	if (!pp)
	panic("PCIe: failed to allocate pcie_port data");
	sys->private_data = pp;
	pp->root_bus_nr = sys->busnr;
	spin_lock_init(&pp->conf_lock);

	switch (index) {
	case 0:
	kirkwood_enable_pcie_clk("0");
	pcie0_ioresources_init(pp);
	pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
	break;
	case 1:
	kirkwood_enable_pcie_clk("1");
	pcie1_ioresources_init(pp);
	pci_ioremap_io(SZ_64K * sys->busnr,
	KIRKWOOD_PCIE1_IO_PHYS_BASE);
	break;
	default:
	panic("PCIe setup: invalid controller %d", index);
	}

	if (request_resource(&iomem_resource, &pp->res))
	panic("Request PCIe%d Memory resource failed\n", index);

	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);

	/*
	* Generic PCIe unit setup.
	*/
	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);

	orion_pcie_setup(pp->base);

	return 1;
	}

	/*
	* The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
	* is operating as a root complex this needs to be switched to
	* PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
	* the device. Decoding setup is handled by the orion code.
	*/
	static void rc_pci_fixup(struct pci_dev *dev)
	{
	if (dev->bus->parent == NULL && dev->devfn == 0) {
	int i;

	dev->class &= 0xff;
	dev->class \|= PCI_CLASS_BRIDGE_HOST << 8;
	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
	dev->resource[i].start = 0;
	dev->resource[i].end = 0;
	dev->resource[i].flags = 0;
	}
	}
	}
	DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);

	static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
	u8 pin)
	{
	struct pci_sys_data *sys = dev->sysdata;
	struct pcie_port *pp = sys->private_data;

	return pp->irq;
	}

	static struct hw_pci kirkwood_pci __initdata = {
	.setup = kirkwood_pcie_setup,
	.map_irq = kirkwood_pcie_map_irq,
	.ops = &pcie_ops,
	};

	static void __init add_pcie_port(int index, void __iomem *base)
	{
	pcie_port_map[num_pcie_ports++] = index;
	pr_info("Kirkwood PCIe port %d: link %s\n", index,
	orion_pcie_link_up(base) ? "up" : "down");
	}

	void __init kirkwood_pcie_init(unsigned int portmask)
	{
	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;

	if (portmask & KW_PCIE0)
	add_pcie_port(0, PCIE_VIRT_BASE);

	if (portmask & KW_PCIE1)
	add_pcie_port(1, PCIE1_VIRT_BASE);

	kirkwood_pci.nr_controllers = num_pcie_ports;
	pci_common_init(&kirkwood_pci);
	}