cw1200: Less function calls in cw1200_load_firmware_cw1200() after error detection
The functions kfree() and release_firmware() were called in a few cases
by the cw1200_load_firmware_cw1200() function during error handling even if
the passed variables contained still a null pointer.
Corresponding implementation details could be improved by adjustments for
jump targets.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c
index 581dfde..30e7646 100644
--- a/drivers/net/wireless/cw1200/fwio.c
+++ b/drivers/net/wireless/cw1200/fwio.c
@@ -66,25 +66,31 @@
do { \
ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \
if (ret < 0) \
- goto error; \
+ goto exit; \
+ } while (0)
+#define APB_WRITE2(reg, val) \
+ do { \
+ ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \
+ if (ret < 0) \
+ goto free_buffer; \
} while (0)
#define APB_READ(reg, val) \
do { \
ret = cw1200_apb_read_32(priv, CW1200_APB(reg), &(val)); \
if (ret < 0) \
- goto error; \
+ goto free_buffer; \
} while (0)
#define REG_WRITE(reg, val) \
do { \
ret = cw1200_reg_write_32(priv, (reg), (val)); \
if (ret < 0) \
- goto error; \
+ goto exit; \
} while (0)
#define REG_READ(reg, val) \
do { \
ret = cw1200_reg_read_32(priv, (reg), &(val)); \
if (ret < 0) \
- goto error; \
+ goto exit; \
} while (0)
switch (priv->hw_revision) {
@@ -142,14 +148,14 @@
ret = request_firmware(&firmware, fw_path, priv->pdev);
if (ret) {
pr_err("Can't load firmware file %s.\n", fw_path);
- goto error;
+ goto exit;
}
buf = kmalloc(DOWNLOAD_BLOCK_SIZE, GFP_KERNEL | GFP_DMA);
if (!buf) {
pr_err("Can't allocate firmware load buffer.\n");
ret = -ENOMEM;
- goto error;
+ goto firmware_release;
}
/* Check if the bootloader is ready */
@@ -163,7 +169,7 @@
if (val32 != DOWNLOAD_I_AM_HERE) {
pr_err("Bootloader is not ready.\n");
ret = -ETIMEDOUT;
- goto error;
+ goto free_buffer;
}
/* Calculcate number of download blocks */
@@ -171,7 +177,7 @@
/* Updating the length in Download Ctrl Area */
val32 = firmware->size; /* Explicit cast from size_t to u32 */
- APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, val32);
+ APB_WRITE2(DOWNLOAD_IMAGE_SIZE_REG, val32);
/* Firmware downloading loop */
for (block = 0; block < num_blocks; block++) {
@@ -183,7 +189,7 @@
if (val32 != DOWNLOAD_PENDING) {
pr_err("Bootloader reported error %d.\n", val32);
ret = -EIO;
- goto error;
+ goto free_buffer;
}
/* loop until put - get <= 24K */
@@ -198,7 +204,7 @@
if ((put - get) > (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) {
pr_err("Timeout waiting for FIFO.\n");
ret = -ETIMEDOUT;
- goto error;
+ goto free_buffer;
}
/* calculate the block size */
@@ -220,12 +226,12 @@
if (ret < 0) {
pr_err("Can't write firmware block @ %d!\n",
put & (DOWNLOAD_FIFO_SIZE - 1));
- goto error;
+ goto free_buffer;
}
/* update the put register */
put += block_size;
- APB_WRITE(DOWNLOAD_PUT_REG, put);
+ APB_WRITE2(DOWNLOAD_PUT_REG, put);
} /* End of firmware download loop */
/* Wait for the download completion */
@@ -238,18 +244,21 @@
if (val32 != DOWNLOAD_SUCCESS) {
pr_err("Wait for download completion failed: 0x%.8X\n", val32);
ret = -ETIMEDOUT;
- goto error;
+ goto free_buffer;
} else {
pr_info("Firmware download completed.\n");
ret = 0;
}
-error:
+free_buffer:
kfree(buf);
+firmware_release:
release_firmware(firmware);
+exit:
return ret;
#undef APB_WRITE
+#undef APB_WRITE2
#undef APB_READ
#undef REG_WRITE
#undef REG_READ