[media] cx25840: more cx23888 register address changes
The cx23888 also moves the following registers around:
!cx23888 cx23888
-------- -------
0x418, 0x41c 0x434, 0x438
0x420 0x418 (expect for bit 29 which has a different meaning)
0x478 0x454
Also drop the set_input code where the scaler is changed: this does not
belong here, changing the input should not change the scaler.
And that's besides the fact that that code is plain wrong.
After this change the cx23888 behaves much better. In particular, calling
set_input no longer changes the saturation to 0, causing a grayscale
image.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index ec11ba7..a741c30 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -559,7 +559,10 @@
cx25840_write4(client, 0x414, 0x00107d12);
/* Chroma */
- cx25840_write4(client, 0x420, 0x3d008282);
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x418, 0x1d008282);
+ else
+ cx25840_write4(client, 0x420, 0x3d008282);
/*
* Aux PLL
@@ -673,7 +676,10 @@
cx25840_write4(client, 0x130, 0x0);
/* Undocumented */
- cx25840_write4(client, 0x478, 0x6628021F);
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x454, 0x6628021F);
+ else
+ cx25840_write4(client, 0x478, 0x6628021F);
/* AFE_CLK_OUT_CTRL - Select the clock output source as output */
cx25840_write4(client, 0x144, 0x5);
@@ -1106,25 +1112,10 @@
cx25840_write4(client, 0x410, 0xffff0dbf);
cx25840_write4(client, 0x414, 0x00137d03);
- /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is
- CHROMA_CTRL */
- if (is_cx23888(state))
- cx25840_write4(client, 0x418, 0x01008080);
- else
- cx25840_write4(client, 0x418, 0x01000000);
-
- cx25840_write4(client, 0x41c, 0x00000000);
-
- /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is
- CRUSH_CTRL */
- if (is_cx23888(state))
- cx25840_write4(client, 0x420, 0x001c3e0f);
- else
- cx25840_write4(client, 0x420, 0x001c8282);
-
cx25840_write4(client, state->vbi_regs_offset + 0x42c, 0x42600000);
cx25840_write4(client, state->vbi_regs_offset + 0x430, 0x0000039b);
cx25840_write4(client, state->vbi_regs_offset + 0x438, 0x00000000);
+
cx25840_write4(client, state->vbi_regs_offset + 0x440, 0xF8E3E824);
cx25840_write4(client, state->vbi_regs_offset + 0x444, 0x401040dc);
cx25840_write4(client, state->vbi_regs_offset + 0x448, 0xcd3f02a0);
@@ -1425,14 +1416,20 @@
fmt->width, fmt->height, HSC, VSC);
/* HSCALE=HSC */
- cx25840_write(client, 0x418, HSC & 0xff);
- cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
- cx25840_write(client, 0x41a, HSC >> 16);
- /* VSCALE=VSC */
- cx25840_write(client, 0x41c, VSC & 0xff);
- cx25840_write(client, 0x41d, VSC >> 8);
- /* VS_INTRLACE=1 VFILT=filter */
- cx25840_write(client, 0x41e, 0x8 | filter);
+ if (is_cx23888(state)) {
+ cx25840_write4(client, 0x434, HSC | (1 << 24));
+ /* VSCALE=VSC VS_INTRLACE=1 VFILT=filter */
+ cx25840_write4(client, 0x438, VSC | (1 << 19) | (filter << 16));
+ } else {
+ cx25840_write(client, 0x418, HSC & 0xff);
+ cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
+ cx25840_write(client, 0x41a, HSC >> 16);
+ /* VSCALE=VSC */
+ cx25840_write(client, 0x41c, VSC & 0xff);
+ cx25840_write(client, 0x41d, VSC >> 8);
+ /* VS_INTRLACE=1 VFILT=filter */
+ cx25840_write(client, 0x41e, 0x8 | filter);
+ }
return 0;
}