RealView: Move the IRQ_* definitions out of the board-*.h files
The IRQ_* macros need to be made visible via the mach/irqs.h file but
without the additional macros defined in the board-*.h files.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 346cbf0..9ea9c05 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
#include <asm/hardware/gic.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
#include "core.h"
#include "clock.h"
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d770..794a8d9 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
#endif
-#define IRQ_EB_GIC_START 32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
-#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
-#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
-#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
-#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
-#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
-#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
-#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
-#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
-#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
-#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
-#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
-#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
-#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
-#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
-#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
-#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
-#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2 -1
-#define IRQ_EB11MP_UART3 -1
-#define IRQ_EB11MP_CLCD -1
-#define IRQ_EB11MP_DMA -1
-#define IRQ_EB11MP_WDOG -1
-#define IRQ_EB11MP_GPIO0 -1
-#define IRQ_EB11MP_GPIO1 -1
-#define IRQ_EB11MP_GPIO2 -1
-#define IRQ_EB11MP_SCI -1
-#define IRQ_EB11MP_SSP -1
-
-#define NR_GIC_EB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
- && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
- && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_EB11MP
-#endif
-
/*
* Core tile identification (REALVIEW_SYS_PROCID)
*/
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index e4d0e804..98f8e7e 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -73,82 +73,4 @@
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START 32
-#define IRQ_PB1176_GIC_START 64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
-#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
-#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
-#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
-#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
-#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
-#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
-#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
-#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
-#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
-#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
-#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
-#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
-
-#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
-#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0 -1
-#define IRQ_PB1176_SSP -1
-#define IRQ_PB1176_SCTL -1
-
-#define NR_GIC_PB1176 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB1176
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB1176 */
-
#endif /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7..f0d68e0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START 32
-#define IRQ_PB11MP_GIC_START 64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
-#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
-#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
-#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
-#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
-#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
-#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
-#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
-#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
-#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
-#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC -1
-#define IRQ_PB11MP_SCTL -1
-
-#define NR_GIC_PB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB11MP
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB11MP */
-
#endif /* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b..4dfc67a 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START 32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
-#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
-#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
-#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
-#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
-#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
-#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
-#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
-#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
-#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC -1
-#define IRQ_PBA8_SCTL -1
-
-#define NR_GIC_PBA8 1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PBA8
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PBA8 */
-
#endif /* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
index c265093..848bfff 100644
--- a/arch/arm/mach-realview/include/mach/board-pbx.h
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -81,101 +81,6 @@
#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */
/*
- * Irqs
- */
-#define IRQ_PBX_GIC_START 32
-
-/* L220
-#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29)
-#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30)
-#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31)
-*/
-
-/*
- * PB-X on-board gic irq sources
- */
-#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */
-#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
-#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */
-#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */
-#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */
-#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */
-#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */
-#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */
-#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */
-#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */
-
-#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */
-#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33)
-#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34)
-#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35)
-#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36)
-#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37)
-#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38)
-#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39)
-
-#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */
-#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */
-/* ... */
-#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47)
-
-/* ... */
-#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50)
-#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51)
-#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52)
-#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53)
-
-#define IRQ_PBX_SMC -1
-#define IRQ_PBX_SCTL -1
-
-#define NR_GIC_PBX 1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBX
- */
-#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PBX)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PBX
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PBX
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PBX */
-
-/*
* Core tile identification (REALVIEW_SYS_PROCID)
*/
#define REALVIEW_PBX_PROC_MASK 0xFF000000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 0000000..204d537
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START 32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
+#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
+#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
+#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
+#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
+#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
+#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
+#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
+#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
+#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
+#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
+#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
+#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
+#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
+#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
+#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
+#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
+#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2 -1
+#define IRQ_EB11MP_UART3 -1
+#define IRQ_EB11MP_CLCD -1
+#define IRQ_EB11MP_DMA -1
+#define IRQ_EB11MP_WDOG -1
+#define IRQ_EB11MP_GPIO0 -1
+#define IRQ_EB11MP_GPIO1 -1
+#define IRQ_EB11MP_GPIO2 -1
+#define IRQ_EB11MP_SCI -1
+#define IRQ_EB11MP_SSP -1
+
+#define NR_GIC_EB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+ && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+ && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_EB11MP
+#endif
+
+#endif /* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 0000000..2410d4f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START 32
+#define IRQ_PB1176_GIC_START 64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
+#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
+#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
+#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
+#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
+#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
+#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
+#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
+#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
+#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
+#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
+#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
+
+#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
+#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0 -1
+#define IRQ_PB1176_SSP -1
+#define IRQ_PB1176_SCTL -1
+
+#define NR_GIC_PB1176 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB1176
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif /* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 0000000..34e255ad
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START 32
+#define IRQ_PB11MP_GIC_START 64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
+#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
+#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
+#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
+#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
+#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
+#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
+#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
+#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
+#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
+#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC -1
+#define IRQ_PB11MP_SCTL -1
+
+#define NR_GIC_PB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB11MP
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif /* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 0000000..86792a9
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START 32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
+#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
+#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
+#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
+#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC -1
+#define IRQ_PBA8_SCTL -1
+
+#define NR_GIC_PBA8 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBA8
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif /* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 0000000..deaad43
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START 32
+
+/* L220
+#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */
+#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */
+#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */
+#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */
+#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC -1
+#define IRQ_PBX_SCTL -1
+
+#define NR_GIC_PBX 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBX
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBX */
+
+#endif /* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index e9e3826..78854f2 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,11 +22,11 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30