Staging: rt3090: remove private debugging ioctls
This makes rt3090 match other Ralink drivers.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/rt3090/oid.h b/drivers/staging/rt3090/oid.h
index 29a4340..a375da8 100644
--- a/drivers/staging/rt3090/oid.h
+++ b/drivers/staging/rt3090/oid.h
@@ -679,18 +679,6 @@
#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
-#ifdef DBG
-#define RTPRIV_IOCTL_BBP (SIOCIWFIRSTPRIV + 0x03)
-#define RTPRIV_IOCTL_MAC (SIOCIWFIRSTPRIV + 0x05)
-
-#ifdef RTMP_RF_RW_SUPPORT
-// TODO: shiang, Need to reassign the oid number. ArchTeam use (SIOCIWFIRSTPRIV + 0x19) for this oid
-#define RTPRIV_IOCTL_RF (SIOCIWFIRSTPRIV + 0x13) // edit by johnli, fix read rf register problem
-#endif // RTMP_RF_RW_SUPPORT //
-
-#define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07)
-#endif // DBG //
-
#ifdef RALINK_ATE
#ifdef RALINK_28xx_QA
#define RTPRIV_IOCTL_ATE (SIOCIWFIRSTPRIV + 0x08)
diff --git a/drivers/staging/rt3090/sta_ioctl.c b/drivers/staging/rt3090/sta_ioctl.c
index b8ab84a..8f54cca 100644
--- a/drivers/staging/rt3090/sta_ioctl.c
+++ b/drivers/staging/rt3090/sta_ioctl.c
@@ -101,23 +101,6 @@
IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
/* --- sub-ioctls relations --- */
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
- IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- "bbp"},
-{ RTPRIV_IOCTL_MAC,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
- "mac"},
-#ifdef RTMP_RF_RW_SUPPORT
-{ RTPRIV_IOCTL_RF,
- IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- "rf"},
-#endif // RTMP_RF_RW_SUPPORT //
-{ RTPRIV_IOCTL_E2P,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
- "e2p"},
-#endif /* DBG */
-
{ RTPRIV_IOCTL_STATISTICS,
0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
"stat"},
@@ -204,18 +187,6 @@
IN PSTRING arg);
#endif // WPA_SUPPLICANT_SUPPORT //
-#ifdef DBG
-
-VOID RTMPIoctlMAC(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-
-VOID RTMPIoctlE2PROM(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-#endif // DBG //
-
-
NDIS_STATUS RTMPWPANoneAddKeyProc(
IN PRTMP_ADAPTER pAd,
IN PVOID pBuf);
@@ -2917,142 +2888,6 @@
}
#endif // #if WIRELESS_EXT > 17
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
- {
- PSTRING this_char;
- PSTRING value = NULL;
- UCHAR regBBP = 0;
-// CHAR arg[255]={0};
- UINT32 bbpId;
- UINT32 bbpValue;
- BOOLEAN bIsPrintAllBBP = FALSE;
- INT Status = 0;
- PRTMP_ADAPTER pAdapter = RTMP_OS_NETDEV_GET_PRIV(dev);
-
-
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
- if (wrq->length > 1) //No parameters.
- {
- sprintf(extra, "\n");
-
- //Parsing Read or Write
- this_char = wrq->pointer;
- DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
- if (!*this_char)
- goto next;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
- DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
- if (sscanf(this_char, "%d", &(bbpId)) == 1)
- {
- if (bbpId <= MAX_BBP_ID)
- {
-#ifdef RALINK_ATE
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- else
-#endif // RALINK_ATE //
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId, regBBP);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
- }
- else
- {//Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- else
- { //Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- else
- { //Write
- if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
- {
- if (bbpId <= MAX_BBP_ID)
- {
-#ifdef RALINK_ATE
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
- /* read it back for showing */
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- else
-#endif // RALINK_ATE //
- {
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
- /* read it back for showing */
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId, regBBP);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
- }
- else
- {//Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- else
- { //Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- }
- else
- bIsPrintAllBBP = TRUE;
-
-next:
- if (bIsPrintAllBBP)
- {
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
- sprintf(extra, "\n");
- for (bbpId = 0; bbpId <= MAX_BBP_ID; bbpId++)
- {
- if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 20))
- break;
-#ifdef RALINK_ATE
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- else
-#endif // RALINK_ATE //
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId, regBBP);
- if (bbpId%5 == 4)
- sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP); // edit by johnli, change display format
- }
-
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
- return Status;
-}
-#endif // DBG //
-
int rt_ioctl_siwrate(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
@@ -3246,11 +3081,7 @@
(iw_handler) NULL, /* + 0x00 */
(iw_handler) NULL, /* + 0x01 */
(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#ifdef DBG
- (iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
(iw_handler) NULL, /* + 0x03 */
-#endif
(iw_handler) NULL, /* + 0x04 */
(iw_handler) NULL, /* + 0x05 */
(iw_handler) NULL, /* + 0x06 */
@@ -5773,20 +5604,6 @@
case RTPRIV_IOCTL_GSITESURVEY:
RTMPIoctlGetSiteSurvey(pAd, wrq);
break;
-#ifdef DBG
- case RTPRIV_IOCTL_MAC:
- RTMPIoctlMAC(pAd, wrq);
- break;
- case RTPRIV_IOCTL_E2P:
- RTMPIoctlE2PROM(pAd, wrq);
- break;
-#ifdef RTMP_RF_RW_SUPPORT
- case RTPRIV_IOCTL_RF:
- RTMPIoctlRF(pAd, wrq);
- break;
-#endif // RTMP_RF_RW_SUPPORT //
-#endif // DBG //
-
case SIOCETHTOOL:
break;
default:
@@ -6700,622 +6517,6 @@
}
#endif // WPA_SUPPLICANT_SUPPORT //
-#ifdef DBG
-/*
- ==========================================================================
- Description:
- Read / Write MAC
- Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 mac 0 ==> read MAC where Addr=0x0
- 2.) iwpriv ra0 mac 0=12 ==> write MAC where Addr=0x0, value=12
- ==========================================================================
-*/
-VOID RTMPIoctlMAC(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- PSTRING this_char;
- PSTRING value;
- INT j = 0, k = 0;
- STRING msg[1024];
- STRING arg[255];
- ULONG macAddr = 0;
- UCHAR temp[16];
- STRING temp2[16];
- UINT32 macValue = 0;
- INT Status;
- BOOLEAN bIsPrintAllMAC = FALSE;
-
-
- memset(msg, 0x00, 1024);
- if (wrq->u.data.length > 1) //No parameters.
- {
- Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
- sprintf(msg, "\n");
-
- //Parsing Read or Write
- this_char = arg;
- if (!*this_char)
- goto next;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
- // Sanity check
- if(strlen(this_char) > 4)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
-
- // Mac Addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- if(strlen(this_char) == 4)
- {
- AtoH(this_char, temp, 2);
- macAddr = *temp*256 + temp[1];
- if (macAddr < 0xFFFF)
- {
- RTMP_IO_READ32(pAdapter, macAddr, &macValue);
- DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
- sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr , macValue);
- }
- else
- {//Invalid parametes, so default printk all mac
- bIsPrintAllMAC = TRUE;
- goto next;
- }
- }
- }
- else
- { //Write
- memcpy(&temp2, value, strlen(value));
- temp2[strlen(value)] = '\0';
-
- // Sanity check
- if((strlen(this_char) > 4) || strlen(temp2) > 8)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
-
- j = strlen(temp2);
- while(j-- > 0)
- {
- if(temp2[j] > 'f' || temp2[j] < '0')
- return;
- }
-
- //MAC Addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- //MAC value
- k = j = strlen(temp2);
- while(j-- > 0)
- {
- temp2[8-k+j] = temp2[j];
- }
-
- while(k < 8)
- temp2[7-k++]='0';
- temp2[8]='\0';
-
- {
- AtoH(this_char, temp, 2);
- macAddr = *temp*256 + temp[1];
-
- AtoH(temp2, temp, 4);
- macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
- // debug mode
- if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
- {
- // 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
- if (macValue & 0x000000ff)
- {
- pAdapter->BbpTuning.bEnable = TRUE;
- DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
- }
- else
- {
- UCHAR R66;
- pAdapter->BbpTuning.bEnable = FALSE;
- R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
- }
- else
-#endif // RALINK_ATE //
-
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
- DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
- }
- return;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
- RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
- sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr, macValue);
- }
- }
- }
- else
- bIsPrintAllMAC = TRUE;
-next:
- if (bIsPrintAllMAC)
- {
- struct file *file_w;
- PSTRING fileName = "MacDump.txt";
- mm_segment_t orig_fs;
-
- orig_fs = get_fs();
- set_fs(KERNEL_DS);
-
- // open file
- file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
- if (IS_ERR(file_w))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(file_w), fileName));
- }
- else
- {
- if (file_w->f_op && file_w->f_op->write)
- {
- file_w->f_pos = 0;
- macAddr = 0x1000;
-
- while (macAddr <= 0x1800)
- {
- RTMP_IO_READ32(pAdapter, macAddr, &macValue);
- sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
-
- // write data to file
- file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
- printk("%s", msg);
- macAddr += 4;
- }
- sprintf(msg, "\nDump all MAC values to %s\n", fileName);
- }
- filp_close(file_w, NULL);
- }
- set_fs(orig_fs);
- }
- if(strlen(msg) == 1)
- sprintf(msg+strlen(msg), "===>Error command format!");
-
- // Copy the information into the user buffer
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
- ==========================================================================
- Description:
- Read / Write E2PROM
- Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 e2p 0 ==> read E2PROM where Addr=0x0
- 2.) iwpriv ra0 e2p 0=1234 ==> write E2PROM where Addr=0x0, value=1234
- ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- PSTRING this_char;
- PSTRING value;
- INT j = 0, k = 0;
- STRING msg[1024];
- STRING arg[255];
- USHORT eepAddr = 0;
- UCHAR temp[16];
- STRING temp2[16];
- USHORT eepValue;
- int Status;
- BOOLEAN bIsPrintAllE2P = FALSE;
-
-
- memset(msg, 0x00, 1024);
- if (wrq->u.data.length > 1) //No parameters.
- {
- Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
- sprintf(msg, "\n");
-
- //Parsing Read or Write
- this_char = arg;
-
-
- if (!*this_char)
- goto next;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
-
- // Sanity check
- if(strlen(this_char) > 4)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
-
- // E2PROM addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- if(strlen(this_char) == 4)
- {
- AtoH(this_char, temp, 2);
- eepAddr = *temp*256 + temp[1];
- if (eepAddr < 0xFFFF)
- {
- RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
- sprintf(msg+strlen(msg), "[0x%04X]:0x%04X ", eepAddr , eepValue);
- }
- else
- {//Invalid parametes, so default printk all bbp
- bIsPrintAllE2P = TRUE;
- goto next;
- }
- }
- }
- else
- { //Write
- memcpy(&temp2, value, strlen(value));
- temp2[strlen(value)] = '\0';
-
- // Sanity check
- if((strlen(this_char) > 4) || strlen(temp2) > 8)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
- j = strlen(temp2);
- while(j-- > 0)
- {
- if(temp2[j] > 'f' || temp2[j] < '0')
- return;
- }
-
- //MAC Addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- //MAC value
- k = j = strlen(temp2);
- while(j-- > 0)
- {
- temp2[4-k+j] = temp2[j];
- }
-
- while(k < 4)
- temp2[3-k++]='0';
- temp2[4]='\0';
-
- AtoH(this_char, temp, 2);
- eepAddr = *temp*256 + temp[1];
-
- AtoH(temp2, temp, 2);
- eepValue = *temp*256 + temp[1];
-
- RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
- sprintf(msg+strlen(msg), "[0x%02X]:%02X ", eepAddr, eepValue);
- }
- }
- else
- bIsPrintAllE2P = TRUE;
-next:
- if (bIsPrintAllE2P)
- {
- struct file *file_w;
- PSTRING fileName = "EEPROMDump.txt";
- mm_segment_t orig_fs;
-
- orig_fs = get_fs();
- set_fs(KERNEL_DS);
-
- // open file
- file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
- if (IS_ERR(file_w))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(file_w), fileName));
- }
- else
- {
- if (file_w->f_op && file_w->f_op->write)
- {
- file_w->f_pos = 0;
- eepAddr = 0x00;
-
- while (eepAddr <= 0xFE)
- {
- RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
- sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
-
- // write data to file
- file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
- printk("%s", msg);
- eepAddr += 2;
- }
- sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
- }
- filp_close(file_w, NULL);
- }
- set_fs(orig_fs);
- }
- if(strlen(msg) == 1)
- sprintf(msg+strlen(msg), "===>Error command format!");
-
-
- // Copy the information into the user buffer
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-
-
-#ifdef RT30xx
-/*
- ==========================================================================
- Description:
- Read / Write RF register
-Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 rf ==> read all RF registers
- 2.) iwpriv ra0 rf 1 ==> read RF where RegID=1
- 3.) iwpriv ra0 rf 1=10 ==> write RF R1=0x10
- ==========================================================================
-*/
-VOID RTMPIoctlRF(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- CHAR *this_char;
- CHAR *value;
- UCHAR regRF = 0;
- STRING msg[2048];
- CHAR arg[255];
- INT rfId;
- LONG rfValue;
- int Status;
- BOOLEAN bIsPrintAllRF = FALSE;
-
-
- memset(msg, 0x00, 2048);
- if (wrq->u.data.length > 1) //No parameters.
- {
- Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
- sprintf(msg, "\n");
-
- //Parsing Read or Write
- this_char = arg;
- if (!*this_char)
- goto next;
-
- if ((value = strchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
- if (sscanf((PSTRING) this_char, "%d", &(rfId)) == 1)
- {
- if (rfId <= 31)
- {
-#ifdef RALINK_ATE
- /*
- In RT2860 ATE mode, we do not load 8051 firmware.
- We must access RF directly.
- For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
- */
- if (ATE_ON(pAdapter))
- {
- ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF);
- }
- else
-#endif // RALINK_ATE //
- // according to Andy, Gary, David require.
- // the command rf shall read rf register directly for dubug.
- // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
-
- sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X ", rfId, rfId, regRF);
- }
- else
- {//Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- goto next;
- }
- }
- else
- { //Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- goto next;
- }
- }
- else
- { //Write
- if ((sscanf((PSTRING) this_char, "%d", &(rfId)) == 1) && (sscanf((PSTRING) value, "%lx", &(rfValue)) == 1))
- {
- if (rfId <= 31)
- {
-#ifdef RALINK_ATE
- /*
- In RT2860 ATE mode, we do not load 8051 firmware.
- We must access RF directly.
- For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
- */
- if (ATE_ON(pAdapter))
- {
- ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF);
- ATE_RF_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
- //Read it back for showing
- ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF);
- sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId, regRF);
- }
- else
-#endif // RALINK_ATE //
- {
- // according to Andy, Gary, David require.
- // the command RF shall read/write RF register directly for dubug.
- //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
- RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
- //Read it back for showing
- //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
- sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId, regRF);
- }
- }
- else
- {//Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- }
- }
- else
- { //Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- }
- }
- }
- else
- bIsPrintAllRF = TRUE;
-next:
- if (bIsPrintAllRF)
- {
- memset(msg, 0x00, 2048);
- sprintf(msg, "\n");
- for (rfId = 0; rfId <= 31; rfId++)
- {
-#ifdef RALINK_ATE
- /*
- In RT2860 ATE mode, we do not load 8051 firmware.
- We must access RF directly.
- For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
- */
- if (ATE_ON(pAdapter))
- {
- ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF);
- }
- else
-#endif // RALINK_ATE //
-
- // according to Andy, Gary, David require.
- // the command RF shall read/write RF register directly for dubug.
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
- sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
- }
- // Copy the information into the user buffer
- DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
- wrq->u.data.length = strlen(msg);
- if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __FUNCTION__));
- }
- }
- else
- {
- if(strlen(msg) == 1)
- sprintf(msg+strlen(msg), "===>Error command format!");
-
- DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
- // Copy the information into the user buffer
- DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
-
- // Copy the information into the user buffer
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
-}
-#endif // RT30xx //
-#endif // DBG //
-
-
-
-
INT Set_TGnWifiTest_Proc(
IN PRTMP_ADAPTER pAd,
IN PSTRING arg)