| /* |
| * PCI Stub Driver - Grabs devices in backend to be exported later |
| * |
| * Ryan Wilson <hap9@epoch.ncsc.mil> |
| * Chris Bookholt <hap10@epoch.ncsc.mil> |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/rwsem.h> |
| #include <linux/list.h> |
| #include <linux/spinlock.h> |
| #include <linux/kref.h> |
| #include <linux/pci.h> |
| #include <linux/wait.h> |
| #include <linux/sched.h> |
| #include <linux/atomic.h> |
| #include <xen/events.h> |
| #include <asm/xen/pci.h> |
| #include <asm/xen/hypervisor.h> |
| #include <xen/interface/physdev.h> |
| #include "pciback.h" |
| #include "conf_space.h" |
| #include "conf_space_quirks.h" |
| |
| static char *pci_devs_to_hide; |
| wait_queue_head_t xen_pcibk_aer_wait_queue; |
| /*Add sem for sync AER handling and xen_pcibk remove/reconfigue ops, |
| * We want to avoid in middle of AER ops, xen_pcibk devices is being removed |
| */ |
| static DECLARE_RWSEM(pcistub_sem); |
| module_param_named(hide, pci_devs_to_hide, charp, 0444); |
| |
| struct pcistub_device_id { |
| struct list_head slot_list; |
| int domain; |
| unsigned char bus; |
| unsigned int devfn; |
| }; |
| static LIST_HEAD(pcistub_device_ids); |
| static DEFINE_SPINLOCK(device_ids_lock); |
| |
| struct pcistub_device { |
| struct kref kref; |
| struct list_head dev_list; |
| spinlock_t lock; |
| |
| struct pci_dev *dev; |
| struct xen_pcibk_device *pdev;/* non-NULL if struct pci_dev is in use */ |
| }; |
| |
| /* Access to pcistub_devices & seized_devices lists and the initialize_devices |
| * flag must be locked with pcistub_devices_lock |
| */ |
| static DEFINE_SPINLOCK(pcistub_devices_lock); |
| static LIST_HEAD(pcistub_devices); |
| |
| /* wait for device_initcall before initializing our devices |
| * (see pcistub_init_devices_late) |
| */ |
| static int initialize_devices; |
| static LIST_HEAD(seized_devices); |
| |
| static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev; |
| |
| dev_dbg(&dev->dev, "pcistub_device_alloc\n"); |
| |
| psdev = kzalloc(sizeof(*psdev), GFP_ATOMIC); |
| if (!psdev) |
| return NULL; |
| |
| psdev->dev = pci_dev_get(dev); |
| if (!psdev->dev) { |
| kfree(psdev); |
| return NULL; |
| } |
| |
| kref_init(&psdev->kref); |
| spin_lock_init(&psdev->lock); |
| |
| return psdev; |
| } |
| |
| /* Don't call this directly as it's called by pcistub_device_put */ |
| static void pcistub_device_release(struct kref *kref) |
| { |
| struct pcistub_device *psdev; |
| struct pci_dev *dev; |
| struct xen_pcibk_dev_data *dev_data; |
| |
| psdev = container_of(kref, struct pcistub_device, kref); |
| dev = psdev->dev; |
| dev_data = pci_get_drvdata(dev); |
| |
| dev_dbg(&dev->dev, "pcistub_device_release\n"); |
| |
| xen_unregister_device_domain_owner(dev); |
| |
| /* Call the reset function which does not take lock as this |
| * is called from "unbind" which takes a device_lock mutex. |
| */ |
| __pci_reset_function_locked(dev); |
| if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) |
| dev_dbg(&dev->dev, "Could not reload PCI state\n"); |
| else |
| pci_restore_state(dev); |
| |
| if (dev->msix_cap) { |
| struct physdev_pci_device ppdev = { |
| .seg = pci_domain_nr(dev->bus), |
| .bus = dev->bus->number, |
| .devfn = dev->devfn |
| }; |
| int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix, |
| &ppdev); |
| |
| if (err) |
| dev_warn(&dev->dev, "MSI-X release failed (%d)\n", |
| err); |
| } |
| |
| /* Disable the device */ |
| xen_pcibk_reset_device(dev); |
| |
| kfree(dev_data); |
| pci_set_drvdata(dev, NULL); |
| |
| /* Clean-up the device */ |
| xen_pcibk_config_free_dyn_fields(dev); |
| xen_pcibk_config_free_dev(dev); |
| |
| dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; |
| pci_dev_put(dev); |
| |
| kfree(psdev); |
| } |
| |
| static inline void pcistub_device_get(struct pcistub_device *psdev) |
| { |
| kref_get(&psdev->kref); |
| } |
| |
| static inline void pcistub_device_put(struct pcistub_device *psdev) |
| { |
| kref_put(&psdev->kref, pcistub_device_release); |
| } |
| |
| static struct pcistub_device *pcistub_device_find(int domain, int bus, |
| int slot, int func) |
| { |
| struct pcistub_device *psdev = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (psdev->dev != NULL |
| && domain == pci_domain_nr(psdev->dev->bus) |
| && bus == psdev->dev->bus->number |
| && slot == PCI_SLOT(psdev->dev->devfn) |
| && func == PCI_FUNC(psdev->dev->devfn)) { |
| pcistub_device_get(psdev); |
| goto out; |
| } |
| } |
| |
| /* didn't find it */ |
| psdev = NULL; |
| |
| out: |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| return psdev; |
| } |
| |
| static struct pci_dev *pcistub_device_get_pci_dev(struct xen_pcibk_device *pdev, |
| struct pcistub_device *psdev) |
| { |
| struct pci_dev *pci_dev = NULL; |
| unsigned long flags; |
| |
| pcistub_device_get(psdev); |
| |
| spin_lock_irqsave(&psdev->lock, flags); |
| if (!psdev->pdev) { |
| psdev->pdev = pdev; |
| pci_dev = psdev->dev; |
| } |
| spin_unlock_irqrestore(&psdev->lock, flags); |
| |
| if (!pci_dev) |
| pcistub_device_put(psdev); |
| |
| return pci_dev; |
| } |
| |
| struct pci_dev *pcistub_get_pci_dev_by_slot(struct xen_pcibk_device *pdev, |
| int domain, int bus, |
| int slot, int func) |
| { |
| struct pcistub_device *psdev; |
| struct pci_dev *found_dev = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (psdev->dev != NULL |
| && domain == pci_domain_nr(psdev->dev->bus) |
| && bus == psdev->dev->bus->number |
| && slot == PCI_SLOT(psdev->dev->devfn) |
| && func == PCI_FUNC(psdev->dev->devfn)) { |
| found_dev = pcistub_device_get_pci_dev(pdev, psdev); |
| break; |
| } |
| } |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| return found_dev; |
| } |
| |
| struct pci_dev *pcistub_get_pci_dev(struct xen_pcibk_device *pdev, |
| struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev; |
| struct pci_dev *found_dev = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (psdev->dev == dev) { |
| found_dev = pcistub_device_get_pci_dev(pdev, psdev); |
| break; |
| } |
| } |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| return found_dev; |
| } |
| |
| void pcistub_put_pci_dev(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev, *found_psdev = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (psdev->dev == dev) { |
| found_psdev = psdev; |
| break; |
| } |
| } |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| if (WARN_ON(!found_psdev)) |
| return; |
| |
| /*hold this lock for avoiding breaking link between |
| * pcistub and xen_pcibk when AER is in processing |
| */ |
| down_write(&pcistub_sem); |
| /* Cleanup our device |
| * (so it's ready for the next domain) |
| */ |
| |
| /* This is OK - we are running from workqueue context |
| * and want to inhibit the user from fiddling with 'reset' |
| */ |
| pci_reset_function(dev); |
| pci_restore_state(psdev->dev); |
| |
| /* This disables the device. */ |
| xen_pcibk_reset_device(found_psdev->dev); |
| |
| /* And cleanup up our emulated fields. */ |
| xen_pcibk_config_free_dyn_fields(found_psdev->dev); |
| xen_pcibk_config_reset_dev(found_psdev->dev); |
| |
| xen_unregister_device_domain_owner(found_psdev->dev); |
| |
| spin_lock_irqsave(&found_psdev->lock, flags); |
| found_psdev->pdev = NULL; |
| spin_unlock_irqrestore(&found_psdev->lock, flags); |
| |
| pcistub_device_put(found_psdev); |
| up_write(&pcistub_sem); |
| } |
| |
| static int pcistub_match_one(struct pci_dev *dev, |
| struct pcistub_device_id *pdev_id) |
| { |
| /* Match the specified device by domain, bus, slot, func and also if |
| * any of the device's parent bridges match. |
| */ |
| for (; dev != NULL; dev = dev->bus->self) { |
| if (pci_domain_nr(dev->bus) == pdev_id->domain |
| && dev->bus->number == pdev_id->bus |
| && dev->devfn == pdev_id->devfn) |
| return 1; |
| |
| /* Sometimes topmost bridge links to itself. */ |
| if (dev == dev->bus->self) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int pcistub_match(struct pci_dev *dev) |
| { |
| struct pcistub_device_id *pdev_id; |
| unsigned long flags; |
| int found = 0; |
| |
| spin_lock_irqsave(&device_ids_lock, flags); |
| list_for_each_entry(pdev_id, &pcistub_device_ids, slot_list) { |
| if (pcistub_match_one(dev, pdev_id)) { |
| found = 1; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&device_ids_lock, flags); |
| |
| return found; |
| } |
| |
| static int pcistub_init_device(struct pci_dev *dev) |
| { |
| struct xen_pcibk_dev_data *dev_data; |
| int err = 0; |
| |
| dev_dbg(&dev->dev, "initializing...\n"); |
| |
| /* The PCI backend is not intended to be a module (or to work with |
| * removable PCI devices (yet). If it were, xen_pcibk_config_free() |
| * would need to be called somewhere to free the memory allocated |
| * here and then to call kfree(pci_get_drvdata(psdev->dev)). |
| */ |
| dev_data = kzalloc(sizeof(*dev_data) + strlen(DRV_NAME "[]") |
| + strlen(pci_name(dev)) + 1, GFP_ATOMIC); |
| if (!dev_data) { |
| err = -ENOMEM; |
| goto out; |
| } |
| pci_set_drvdata(dev, dev_data); |
| |
| /* |
| * Setup name for fake IRQ handler. It will only be enabled |
| * once the device is turned on by the guest. |
| */ |
| sprintf(dev_data->irq_name, DRV_NAME "[%s]", pci_name(dev)); |
| |
| dev_dbg(&dev->dev, "initializing config\n"); |
| |
| init_waitqueue_head(&xen_pcibk_aer_wait_queue); |
| err = xen_pcibk_config_init_dev(dev); |
| if (err) |
| goto out; |
| |
| /* HACK: Force device (& ACPI) to determine what IRQ it's on - we |
| * must do this here because pcibios_enable_device may specify |
| * the pci device's true irq (and possibly its other resources) |
| * if they differ from what's in the configuration space. |
| * This makes the assumption that the device's resources won't |
| * change after this point (otherwise this code may break!) |
| */ |
| dev_dbg(&dev->dev, "enabling device\n"); |
| err = pci_enable_device(dev); |
| if (err) |
| goto config_release; |
| |
| if (dev->msix_cap) { |
| struct physdev_pci_device ppdev = { |
| .seg = pci_domain_nr(dev->bus), |
| .bus = dev->bus->number, |
| .devfn = dev->devfn |
| }; |
| |
| err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev); |
| if (err) |
| dev_err(&dev->dev, "MSI-X preparation failed (%d)\n", |
| err); |
| } |
| |
| /* We need the device active to save the state. */ |
| dev_dbg(&dev->dev, "save state of device\n"); |
| pci_save_state(dev); |
| dev_data->pci_saved_state = pci_store_saved_state(dev); |
| if (!dev_data->pci_saved_state) |
| dev_err(&dev->dev, "Could not store PCI conf saved state!\n"); |
| else { |
| dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n"); |
| __pci_reset_function_locked(dev); |
| pci_restore_state(dev); |
| } |
| /* Now disable the device (this also ensures some private device |
| * data is setup before we export) |
| */ |
| dev_dbg(&dev->dev, "reset device\n"); |
| xen_pcibk_reset_device(dev); |
| |
| dev->dev_flags |= PCI_DEV_FLAGS_ASSIGNED; |
| return 0; |
| |
| config_release: |
| xen_pcibk_config_free_dev(dev); |
| |
| out: |
| pci_set_drvdata(dev, NULL); |
| kfree(dev_data); |
| return err; |
| } |
| |
| /* |
| * Because some initialization still happens on |
| * devices during fs_initcall, we need to defer |
| * full initialization of our devices until |
| * device_initcall. |
| */ |
| static int __init pcistub_init_devices_late(void) |
| { |
| struct pcistub_device *psdev; |
| unsigned long flags; |
| int err = 0; |
| |
| pr_debug(DRV_NAME ": pcistub_init_devices_late\n"); |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| while (!list_empty(&seized_devices)) { |
| psdev = container_of(seized_devices.next, |
| struct pcistub_device, dev_list); |
| list_del(&psdev->dev_list); |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| |
| err = pcistub_init_device(psdev->dev); |
| if (err) { |
| dev_err(&psdev->dev->dev, |
| "error %d initializing device\n", err); |
| kfree(psdev); |
| psdev = NULL; |
| } |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| if (psdev) |
| list_add_tail(&psdev->dev_list, &pcistub_devices); |
| } |
| |
| initialize_devices = 1; |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| |
| return 0; |
| } |
| |
| static int pcistub_seize(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev; |
| unsigned long flags; |
| int err = 0; |
| |
| psdev = pcistub_device_alloc(dev); |
| if (!psdev) |
| return -ENOMEM; |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| if (initialize_devices) { |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| |
| /* don't want irqs disabled when calling pcistub_init_device */ |
| err = pcistub_init_device(psdev->dev); |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| if (!err) |
| list_add(&psdev->dev_list, &pcistub_devices); |
| } else { |
| dev_dbg(&dev->dev, "deferring initialization\n"); |
| list_add(&psdev->dev_list, &seized_devices); |
| } |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| |
| if (err) |
| pcistub_device_put(psdev); |
| |
| return err; |
| } |
| |
| static int pcistub_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| int err = 0; |
| |
| dev_dbg(&dev->dev, "probing...\n"); |
| |
| if (pcistub_match(dev)) { |
| |
| if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL |
| && dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { |
| dev_err(&dev->dev, "can't export pci devices that " |
| "don't have a normal (0) or bridge (1) " |
| "header type!\n"); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| dev_info(&dev->dev, "seizing device\n"); |
| err = pcistub_seize(dev); |
| } else |
| /* Didn't find the device */ |
| err = -ENODEV; |
| |
| out: |
| return err; |
| } |
| |
| static void pcistub_remove(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev, *found_psdev = NULL; |
| unsigned long flags; |
| |
| dev_dbg(&dev->dev, "removing\n"); |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| |
| xen_pcibk_config_quirk_release(dev); |
| |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (psdev->dev == dev) { |
| found_psdev = psdev; |
| break; |
| } |
| } |
| |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| |
| if (found_psdev) { |
| dev_dbg(&dev->dev, "found device to remove - in use? %p\n", |
| found_psdev->pdev); |
| |
| if (found_psdev->pdev) { |
| printk(KERN_WARNING DRV_NAME ": ****** removing device " |
| "%s while still in-use! ******\n", |
| pci_name(found_psdev->dev)); |
| printk(KERN_WARNING DRV_NAME ": ****** driver domain may" |
| " still access this device's i/o resources!\n"); |
| printk(KERN_WARNING DRV_NAME ": ****** shutdown driver " |
| "domain before binding device\n"); |
| printk(KERN_WARNING DRV_NAME ": ****** to other drivers " |
| "or domains\n"); |
| |
| xen_pcibk_release_pci_dev(found_psdev->pdev, |
| found_psdev->dev); |
| } |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| list_del(&found_psdev->dev_list); |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| |
| /* the final put for releasing from the list */ |
| pcistub_device_put(found_psdev); |
| } |
| } |
| |
| static DEFINE_PCI_DEVICE_TABLE(pcistub_ids) = { |
| { |
| .vendor = PCI_ANY_ID, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, |
| {0,}, |
| }; |
| |
| #define PCI_NODENAME_MAX 40 |
| static void kill_domain_by_device(struct pcistub_device *psdev) |
| { |
| struct xenbus_transaction xbt; |
| int err; |
| char nodename[PCI_NODENAME_MAX]; |
| |
| BUG_ON(!psdev); |
| snprintf(nodename, PCI_NODENAME_MAX, "/local/domain/0/backend/pci/%d/0", |
| psdev->pdev->xdev->otherend_id); |
| |
| again: |
| err = xenbus_transaction_start(&xbt); |
| if (err) { |
| dev_err(&psdev->dev->dev, |
| "error %d when start xenbus transaction\n", err); |
| return; |
| } |
| /*PV AER handlers will set this flag*/ |
| xenbus_printf(xbt, nodename, "aerState" , "aerfail"); |
| err = xenbus_transaction_end(xbt, 0); |
| if (err) { |
| if (err == -EAGAIN) |
| goto again; |
| dev_err(&psdev->dev->dev, |
| "error %d when end xenbus transaction\n", err); |
| return; |
| } |
| } |
| |
| /* For each aer recovery step error_detected, mmio_enabled, etc, front_end and |
| * backend need to have cooperation. In xen_pcibk, those steps will do similar |
| * jobs: send service request and waiting for front_end response. |
| */ |
| static pci_ers_result_t common_process(struct pcistub_device *psdev, |
| pci_channel_state_t state, int aer_cmd, |
| pci_ers_result_t result) |
| { |
| pci_ers_result_t res = result; |
| struct xen_pcie_aer_op *aer_op; |
| int ret; |
| |
| /*with PV AER drivers*/ |
| aer_op = &(psdev->pdev->sh_info->aer_op); |
| aer_op->cmd = aer_cmd ; |
| /*useful for error_detected callback*/ |
| aer_op->err = state; |
| /*pcifront_end BDF*/ |
| ret = xen_pcibk_get_pcifront_dev(psdev->dev, psdev->pdev, |
| &aer_op->domain, &aer_op->bus, &aer_op->devfn); |
| if (!ret) { |
| dev_err(&psdev->dev->dev, |
| DRV_NAME ": failed to get pcifront device\n"); |
| return PCI_ERS_RESULT_NONE; |
| } |
| wmb(); |
| |
| dev_dbg(&psdev->dev->dev, |
| DRV_NAME ": aer_op %x dom %x bus %x devfn %x\n", |
| aer_cmd, aer_op->domain, aer_op->bus, aer_op->devfn); |
| /*local flag to mark there's aer request, xen_pcibk callback will use |
| * this flag to judge whether we need to check pci-front give aer |
| * service ack signal |
| */ |
| set_bit(_PCIB_op_pending, (unsigned long *)&psdev->pdev->flags); |
| |
| /*It is possible that a pcifront conf_read_write ops request invokes |
| * the callback which cause the spurious execution of wake_up. |
| * Yet it is harmless and better than a spinlock here |
| */ |
| set_bit(_XEN_PCIB_active, |
| (unsigned long *)&psdev->pdev->sh_info->flags); |
| wmb(); |
| notify_remote_via_irq(psdev->pdev->evtchn_irq); |
| |
| ret = wait_event_timeout(xen_pcibk_aer_wait_queue, |
| !(test_bit(_XEN_PCIB_active, (unsigned long *) |
| &psdev->pdev->sh_info->flags)), 300*HZ); |
| |
| if (!ret) { |
| if (test_bit(_XEN_PCIB_active, |
| (unsigned long *)&psdev->pdev->sh_info->flags)) { |
| dev_err(&psdev->dev->dev, |
| "pcifront aer process not responding!\n"); |
| clear_bit(_XEN_PCIB_active, |
| (unsigned long *)&psdev->pdev->sh_info->flags); |
| aer_op->err = PCI_ERS_RESULT_NONE; |
| return res; |
| } |
| } |
| clear_bit(_PCIB_op_pending, (unsigned long *)&psdev->pdev->flags); |
| |
| if (test_bit(_XEN_PCIF_active, |
| (unsigned long *)&psdev->pdev->sh_info->flags)) { |
| dev_dbg(&psdev->dev->dev, |
| "schedule pci_conf service in " DRV_NAME "\n"); |
| xen_pcibk_test_and_schedule_op(psdev->pdev); |
| } |
| |
| res = (pci_ers_result_t)aer_op->err; |
| return res; |
| } |
| |
| /* |
| * xen_pcibk_slot_reset: it will send the slot_reset request to pcifront in case |
| * of the device driver could provide this service, and then wait for pcifront |
| * ack. |
| * @dev: pointer to PCI devices |
| * return value is used by aer_core do_recovery policy |
| */ |
| static pci_ers_result_t xen_pcibk_slot_reset(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev; |
| pci_ers_result_t result; |
| |
| result = PCI_ERS_RESULT_RECOVERED; |
| dev_dbg(&dev->dev, "xen_pcibk_slot_reset(bus:%x,devfn:%x)\n", |
| dev->bus->number, dev->devfn); |
| |
| down_write(&pcistub_sem); |
| psdev = pcistub_device_find(pci_domain_nr(dev->bus), |
| dev->bus->number, |
| PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn)); |
| |
| if (!psdev || !psdev->pdev) { |
| dev_err(&dev->dev, |
| DRV_NAME " device is not found/assigned\n"); |
| goto end; |
| } |
| |
| if (!psdev->pdev->sh_info) { |
| dev_err(&dev->dev, DRV_NAME " device is not connected or owned" |
| " by HVM, kill it\n"); |
| kill_domain_by_device(psdev); |
| goto end; |
| } |
| |
| if (!test_bit(_XEN_PCIB_AERHANDLER, |
| (unsigned long *)&psdev->pdev->sh_info->flags)) { |
| dev_err(&dev->dev, |
| "guest with no AER driver should have been killed\n"); |
| goto end; |
| } |
| result = common_process(psdev, 1, XEN_PCI_OP_aer_slotreset, result); |
| |
| if (result == PCI_ERS_RESULT_NONE || |
| result == PCI_ERS_RESULT_DISCONNECT) { |
| dev_dbg(&dev->dev, |
| "No AER slot_reset service or disconnected!\n"); |
| kill_domain_by_device(psdev); |
| } |
| end: |
| if (psdev) |
| pcistub_device_put(psdev); |
| up_write(&pcistub_sem); |
| return result; |
| |
| } |
| |
| |
| /*xen_pcibk_mmio_enabled: it will send the mmio_enabled request to pcifront |
| * in case of the device driver could provide this service, and then wait |
| * for pcifront ack |
| * @dev: pointer to PCI devices |
| * return value is used by aer_core do_recovery policy |
| */ |
| |
| static pci_ers_result_t xen_pcibk_mmio_enabled(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev; |
| pci_ers_result_t result; |
| |
| result = PCI_ERS_RESULT_RECOVERED; |
| dev_dbg(&dev->dev, "xen_pcibk_mmio_enabled(bus:%x,devfn:%x)\n", |
| dev->bus->number, dev->devfn); |
| |
| down_write(&pcistub_sem); |
| psdev = pcistub_device_find(pci_domain_nr(dev->bus), |
| dev->bus->number, |
| PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn)); |
| |
| if (!psdev || !psdev->pdev) { |
| dev_err(&dev->dev, |
| DRV_NAME " device is not found/assigned\n"); |
| goto end; |
| } |
| |
| if (!psdev->pdev->sh_info) { |
| dev_err(&dev->dev, DRV_NAME " device is not connected or owned" |
| " by HVM, kill it\n"); |
| kill_domain_by_device(psdev); |
| goto end; |
| } |
| |
| if (!test_bit(_XEN_PCIB_AERHANDLER, |
| (unsigned long *)&psdev->pdev->sh_info->flags)) { |
| dev_err(&dev->dev, |
| "guest with no AER driver should have been killed\n"); |
| goto end; |
| } |
| result = common_process(psdev, 1, XEN_PCI_OP_aer_mmio, result); |
| |
| if (result == PCI_ERS_RESULT_NONE || |
| result == PCI_ERS_RESULT_DISCONNECT) { |
| dev_dbg(&dev->dev, |
| "No AER mmio_enabled service or disconnected!\n"); |
| kill_domain_by_device(psdev); |
| } |
| end: |
| if (psdev) |
| pcistub_device_put(psdev); |
| up_write(&pcistub_sem); |
| return result; |
| } |
| |
| /*xen_pcibk_error_detected: it will send the error_detected request to pcifront |
| * in case of the device driver could provide this service, and then wait |
| * for pcifront ack. |
| * @dev: pointer to PCI devices |
| * @error: the current PCI connection state |
| * return value is used by aer_core do_recovery policy |
| */ |
| |
| static pci_ers_result_t xen_pcibk_error_detected(struct pci_dev *dev, |
| pci_channel_state_t error) |
| { |
| struct pcistub_device *psdev; |
| pci_ers_result_t result; |
| |
| result = PCI_ERS_RESULT_CAN_RECOVER; |
| dev_dbg(&dev->dev, "xen_pcibk_error_detected(bus:%x,devfn:%x)\n", |
| dev->bus->number, dev->devfn); |
| |
| down_write(&pcistub_sem); |
| psdev = pcistub_device_find(pci_domain_nr(dev->bus), |
| dev->bus->number, |
| PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn)); |
| |
| if (!psdev || !psdev->pdev) { |
| dev_err(&dev->dev, |
| DRV_NAME " device is not found/assigned\n"); |
| goto end; |
| } |
| |
| if (!psdev->pdev->sh_info) { |
| dev_err(&dev->dev, DRV_NAME " device is not connected or owned" |
| " by HVM, kill it\n"); |
| kill_domain_by_device(psdev); |
| goto end; |
| } |
| |
| /*Guest owns the device yet no aer handler regiested, kill guest*/ |
| if (!test_bit(_XEN_PCIB_AERHANDLER, |
| (unsigned long *)&psdev->pdev->sh_info->flags)) { |
| dev_dbg(&dev->dev, "guest may have no aer driver, kill it\n"); |
| kill_domain_by_device(psdev); |
| goto end; |
| } |
| result = common_process(psdev, error, XEN_PCI_OP_aer_detected, result); |
| |
| if (result == PCI_ERS_RESULT_NONE || |
| result == PCI_ERS_RESULT_DISCONNECT) { |
| dev_dbg(&dev->dev, |
| "No AER error_detected service or disconnected!\n"); |
| kill_domain_by_device(psdev); |
| } |
| end: |
| if (psdev) |
| pcistub_device_put(psdev); |
| up_write(&pcistub_sem); |
| return result; |
| } |
| |
| /*xen_pcibk_error_resume: it will send the error_resume request to pcifront |
| * in case of the device driver could provide this service, and then wait |
| * for pcifront ack. |
| * @dev: pointer to PCI devices |
| */ |
| |
| static void xen_pcibk_error_resume(struct pci_dev *dev) |
| { |
| struct pcistub_device *psdev; |
| |
| dev_dbg(&dev->dev, "xen_pcibk_error_resume(bus:%x,devfn:%x)\n", |
| dev->bus->number, dev->devfn); |
| |
| down_write(&pcistub_sem); |
| psdev = pcistub_device_find(pci_domain_nr(dev->bus), |
| dev->bus->number, |
| PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn)); |
| |
| if (!psdev || !psdev->pdev) { |
| dev_err(&dev->dev, |
| DRV_NAME " device is not found/assigned\n"); |
| goto end; |
| } |
| |
| if (!psdev->pdev->sh_info) { |
| dev_err(&dev->dev, DRV_NAME " device is not connected or owned" |
| " by HVM, kill it\n"); |
| kill_domain_by_device(psdev); |
| goto end; |
| } |
| |
| if (!test_bit(_XEN_PCIB_AERHANDLER, |
| (unsigned long *)&psdev->pdev->sh_info->flags)) { |
| dev_err(&dev->dev, |
| "guest with no AER driver should have been killed\n"); |
| kill_domain_by_device(psdev); |
| goto end; |
| } |
| common_process(psdev, 1, XEN_PCI_OP_aer_resume, |
| PCI_ERS_RESULT_RECOVERED); |
| end: |
| if (psdev) |
| pcistub_device_put(psdev); |
| up_write(&pcistub_sem); |
| return; |
| } |
| |
| /*add xen_pcibk AER handling*/ |
| static const struct pci_error_handlers xen_pcibk_error_handler = { |
| .error_detected = xen_pcibk_error_detected, |
| .mmio_enabled = xen_pcibk_mmio_enabled, |
| .slot_reset = xen_pcibk_slot_reset, |
| .resume = xen_pcibk_error_resume, |
| }; |
| |
| /* |
| * Note: There is no MODULE_DEVICE_TABLE entry here because this isn't |
| * for a normal device. I don't want it to be loaded automatically. |
| */ |
| |
| static struct pci_driver xen_pcibk_pci_driver = { |
| /* The name should be xen_pciback, but until the tools are updated |
| * we will keep it as pciback. */ |
| .name = "pciback", |
| .id_table = pcistub_ids, |
| .probe = pcistub_probe, |
| .remove = pcistub_remove, |
| .err_handler = &xen_pcibk_error_handler, |
| }; |
| |
| static inline int str_to_slot(const char *buf, int *domain, int *bus, |
| int *slot, int *func) |
| { |
| int parsed = 0; |
| |
| switch (sscanf(buf, " %x:%x:%x.%x %n", domain, bus, slot, func, |
| &parsed)) { |
| case 3: |
| *func = -1; |
| sscanf(buf, " %x:%x:%x.* %n", domain, bus, slot, &parsed); |
| break; |
| case 2: |
| *slot = *func = -1; |
| sscanf(buf, " %x:%x:*.* %n", domain, bus, &parsed); |
| break; |
| } |
| if (parsed && !buf[parsed]) |
| return 0; |
| |
| /* try again without domain */ |
| *domain = 0; |
| switch (sscanf(buf, " %x:%x.%x %n", bus, slot, func, &parsed)) { |
| case 2: |
| *func = -1; |
| sscanf(buf, " %x:%x.* %n", bus, slot, &parsed); |
| break; |
| case 1: |
| *slot = *func = -1; |
| sscanf(buf, " %x:*.* %n", bus, &parsed); |
| break; |
| } |
| if (parsed && !buf[parsed]) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static inline int str_to_quirk(const char *buf, int *domain, int *bus, int |
| *slot, int *func, int *reg, int *size, int *mask) |
| { |
| int parsed = 0; |
| |
| sscanf(buf, " %x:%x:%x.%x-%x:%x:%x %n", domain, bus, slot, func, |
| reg, size, mask, &parsed); |
| if (parsed && !buf[parsed]) |
| return 0; |
| |
| /* try again without domain */ |
| *domain = 0; |
| sscanf(buf, " %x:%x.%x-%x:%x:%x %n", bus, slot, func, reg, size, |
| mask, &parsed); |
| if (parsed && !buf[parsed]) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static int pcistub_device_id_add(int domain, int bus, int slot, int func) |
| { |
| struct pcistub_device_id *pci_dev_id; |
| unsigned long flags; |
| int rc = 0, devfn = PCI_DEVFN(slot, func); |
| |
| if (slot < 0) { |
| for (slot = 0; !rc && slot < 32; ++slot) |
| rc = pcistub_device_id_add(domain, bus, slot, func); |
| return rc; |
| } |
| |
| if (func < 0) { |
| for (func = 0; !rc && func < 8; ++func) |
| rc = pcistub_device_id_add(domain, bus, slot, func); |
| return rc; |
| } |
| |
| if (( |
| #if !defined(MODULE) /* pci_domains_supported is not being exported */ \ |
| || !defined(CONFIG_PCI_DOMAINS) |
| !pci_domains_supported ? domain : |
| #endif |
| domain < 0 || domain > 0xffff) |
| || bus < 0 || bus > 0xff |
| || PCI_SLOT(devfn) != slot |
| || PCI_FUNC(devfn) != func) |
| return -EINVAL; |
| |
| pci_dev_id = kmalloc(sizeof(*pci_dev_id), GFP_KERNEL); |
| if (!pci_dev_id) |
| return -ENOMEM; |
| |
| pci_dev_id->domain = domain; |
| pci_dev_id->bus = bus; |
| pci_dev_id->devfn = devfn; |
| |
| pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%d\n", |
| domain, bus, slot, func); |
| |
| spin_lock_irqsave(&device_ids_lock, flags); |
| list_add_tail(&pci_dev_id->slot_list, &pcistub_device_ids); |
| spin_unlock_irqrestore(&device_ids_lock, flags); |
| |
| return 0; |
| } |
| |
| static int pcistub_device_id_remove(int domain, int bus, int slot, int func) |
| { |
| struct pcistub_device_id *pci_dev_id, *t; |
| int err = -ENOENT; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&device_ids_lock, flags); |
| list_for_each_entry_safe(pci_dev_id, t, &pcistub_device_ids, |
| slot_list) { |
| if (pci_dev_id->domain == domain && pci_dev_id->bus == bus |
| && (slot < 0 || PCI_SLOT(pci_dev_id->devfn) == slot) |
| && (func < 0 || PCI_FUNC(pci_dev_id->devfn) == func)) { |
| /* Don't break; here because it's possible the same |
| * slot could be in the list more than once |
| */ |
| list_del(&pci_dev_id->slot_list); |
| kfree(pci_dev_id); |
| |
| err = 0; |
| |
| pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%d from " |
| "seize list\n", domain, bus, slot, func); |
| } |
| } |
| spin_unlock_irqrestore(&device_ids_lock, flags); |
| |
| return err; |
| } |
| |
| static int pcistub_reg_add(int domain, int bus, int slot, int func, |
| unsigned int reg, unsigned int size, |
| unsigned int mask) |
| { |
| int err = 0; |
| struct pcistub_device *psdev; |
| struct pci_dev *dev; |
| struct config_field *field; |
| |
| if (reg > 0xfff || (size < 4 && (mask >> (size * 8)))) |
| return -EINVAL; |
| |
| psdev = pcistub_device_find(domain, bus, slot, func); |
| if (!psdev) { |
| err = -ENODEV; |
| goto out; |
| } |
| dev = psdev->dev; |
| |
| field = kzalloc(sizeof(*field), GFP_ATOMIC); |
| if (!field) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| field->offset = reg; |
| field->size = size; |
| field->mask = mask; |
| field->init = NULL; |
| field->reset = NULL; |
| field->release = NULL; |
| field->clean = xen_pcibk_config_field_free; |
| |
| err = xen_pcibk_config_quirks_add_field(dev, field); |
| if (err) |
| kfree(field); |
| out: |
| if (psdev) |
| pcistub_device_put(psdev); |
| return err; |
| } |
| |
| static ssize_t pcistub_slot_add(struct device_driver *drv, const char *buf, |
| size_t count) |
| { |
| int domain, bus, slot, func; |
| int err; |
| |
| err = str_to_slot(buf, &domain, &bus, &slot, &func); |
| if (err) |
| goto out; |
| |
| err = pcistub_device_id_add(domain, bus, slot, func); |
| |
| out: |
| if (!err) |
| err = count; |
| return err; |
| } |
| static DRIVER_ATTR(new_slot, S_IWUSR, NULL, pcistub_slot_add); |
| |
| static ssize_t pcistub_slot_remove(struct device_driver *drv, const char *buf, |
| size_t count) |
| { |
| int domain, bus, slot, func; |
| int err; |
| |
| err = str_to_slot(buf, &domain, &bus, &slot, &func); |
| if (err) |
| goto out; |
| |
| err = pcistub_device_id_remove(domain, bus, slot, func); |
| |
| out: |
| if (!err) |
| err = count; |
| return err; |
| } |
| static DRIVER_ATTR(remove_slot, S_IWUSR, NULL, pcistub_slot_remove); |
| |
| static ssize_t pcistub_slot_show(struct device_driver *drv, char *buf) |
| { |
| struct pcistub_device_id *pci_dev_id; |
| size_t count = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&device_ids_lock, flags); |
| list_for_each_entry(pci_dev_id, &pcistub_device_ids, slot_list) { |
| if (count >= PAGE_SIZE) |
| break; |
| |
| count += scnprintf(buf + count, PAGE_SIZE - count, |
| "%04x:%02x:%02x.%d\n", |
| pci_dev_id->domain, pci_dev_id->bus, |
| PCI_SLOT(pci_dev_id->devfn), |
| PCI_FUNC(pci_dev_id->devfn)); |
| } |
| spin_unlock_irqrestore(&device_ids_lock, flags); |
| |
| return count; |
| } |
| static DRIVER_ATTR(slots, S_IRUSR, pcistub_slot_show, NULL); |
| |
| static ssize_t pcistub_irq_handler_show(struct device_driver *drv, char *buf) |
| { |
| struct pcistub_device *psdev; |
| struct xen_pcibk_dev_data *dev_data; |
| size_t count = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (count >= PAGE_SIZE) |
| break; |
| if (!psdev->dev) |
| continue; |
| dev_data = pci_get_drvdata(psdev->dev); |
| if (!dev_data) |
| continue; |
| count += |
| scnprintf(buf + count, PAGE_SIZE - count, |
| "%s:%s:%sing:%ld\n", |
| pci_name(psdev->dev), |
| dev_data->isr_on ? "on" : "off", |
| dev_data->ack_intr ? "ack" : "not ack", |
| dev_data->handled); |
| } |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| return count; |
| } |
| static DRIVER_ATTR(irq_handlers, S_IRUSR, pcistub_irq_handler_show, NULL); |
| |
| static ssize_t pcistub_irq_handler_switch(struct device_driver *drv, |
| const char *buf, |
| size_t count) |
| { |
| struct pcistub_device *psdev; |
| struct xen_pcibk_dev_data *dev_data; |
| int domain, bus, slot, func; |
| int err = -ENOENT; |
| |
| err = str_to_slot(buf, &domain, &bus, &slot, &func); |
| if (err) |
| return err; |
| |
| psdev = pcistub_device_find(domain, bus, slot, func); |
| if (!psdev) |
| goto out; |
| |
| dev_data = pci_get_drvdata(psdev->dev); |
| if (!dev_data) |
| goto out; |
| |
| dev_dbg(&psdev->dev->dev, "%s fake irq handler: %d->%d\n", |
| dev_data->irq_name, dev_data->isr_on, |
| !dev_data->isr_on); |
| |
| dev_data->isr_on = !(dev_data->isr_on); |
| if (dev_data->isr_on) |
| dev_data->ack_intr = 1; |
| out: |
| if (psdev) |
| pcistub_device_put(psdev); |
| if (!err) |
| err = count; |
| return err; |
| } |
| static DRIVER_ATTR(irq_handler_state, S_IWUSR, NULL, |
| pcistub_irq_handler_switch); |
| |
| static ssize_t pcistub_quirk_add(struct device_driver *drv, const char *buf, |
| size_t count) |
| { |
| int domain, bus, slot, func, reg, size, mask; |
| int err; |
| |
| err = str_to_quirk(buf, &domain, &bus, &slot, &func, ®, &size, |
| &mask); |
| if (err) |
| goto out; |
| |
| err = pcistub_reg_add(domain, bus, slot, func, reg, size, mask); |
| |
| out: |
| if (!err) |
| err = count; |
| return err; |
| } |
| |
| static ssize_t pcistub_quirk_show(struct device_driver *drv, char *buf) |
| { |
| int count = 0; |
| unsigned long flags; |
| struct xen_pcibk_config_quirk *quirk; |
| struct xen_pcibk_dev_data *dev_data; |
| const struct config_field *field; |
| const struct config_field_entry *cfg_entry; |
| |
| spin_lock_irqsave(&device_ids_lock, flags); |
| list_for_each_entry(quirk, &xen_pcibk_quirks, quirks_list) { |
| if (count >= PAGE_SIZE) |
| goto out; |
| |
| count += scnprintf(buf + count, PAGE_SIZE - count, |
| "%02x:%02x.%01x\n\t%04x:%04x:%04x:%04x\n", |
| quirk->pdev->bus->number, |
| PCI_SLOT(quirk->pdev->devfn), |
| PCI_FUNC(quirk->pdev->devfn), |
| quirk->devid.vendor, quirk->devid.device, |
| quirk->devid.subvendor, |
| quirk->devid.subdevice); |
| |
| dev_data = pci_get_drvdata(quirk->pdev); |
| |
| list_for_each_entry(cfg_entry, &dev_data->config_fields, list) { |
| field = cfg_entry->field; |
| if (count >= PAGE_SIZE) |
| goto out; |
| |
| count += scnprintf(buf + count, PAGE_SIZE - count, |
| "\t\t%08x:%01x:%08x\n", |
| cfg_entry->base_offset + |
| field->offset, field->size, |
| field->mask); |
| } |
| } |
| |
| out: |
| spin_unlock_irqrestore(&device_ids_lock, flags); |
| |
| return count; |
| } |
| static DRIVER_ATTR(quirks, S_IRUSR | S_IWUSR, pcistub_quirk_show, |
| pcistub_quirk_add); |
| |
| static ssize_t permissive_add(struct device_driver *drv, const char *buf, |
| size_t count) |
| { |
| int domain, bus, slot, func; |
| int err; |
| struct pcistub_device *psdev; |
| struct xen_pcibk_dev_data *dev_data; |
| |
| err = str_to_slot(buf, &domain, &bus, &slot, &func); |
| if (err) |
| goto out; |
| |
| psdev = pcistub_device_find(domain, bus, slot, func); |
| if (!psdev) { |
| err = -ENODEV; |
| goto out; |
| } |
| |
| dev_data = pci_get_drvdata(psdev->dev); |
| /* the driver data for a device should never be null at this point */ |
| if (!dev_data) { |
| err = -ENXIO; |
| goto release; |
| } |
| if (!dev_data->permissive) { |
| dev_data->permissive = 1; |
| /* Let user know that what they're doing could be unsafe */ |
| dev_warn(&psdev->dev->dev, "enabling permissive mode " |
| "configuration space accesses!\n"); |
| dev_warn(&psdev->dev->dev, |
| "permissive mode is potentially unsafe!\n"); |
| } |
| release: |
| pcistub_device_put(psdev); |
| out: |
| if (!err) |
| err = count; |
| return err; |
| } |
| |
| static ssize_t permissive_show(struct device_driver *drv, char *buf) |
| { |
| struct pcistub_device *psdev; |
| struct xen_pcibk_dev_data *dev_data; |
| size_t count = 0; |
| unsigned long flags; |
| spin_lock_irqsave(&pcistub_devices_lock, flags); |
| list_for_each_entry(psdev, &pcistub_devices, dev_list) { |
| if (count >= PAGE_SIZE) |
| break; |
| if (!psdev->dev) |
| continue; |
| dev_data = pci_get_drvdata(psdev->dev); |
| if (!dev_data || !dev_data->permissive) |
| continue; |
| count += |
| scnprintf(buf + count, PAGE_SIZE - count, "%s\n", |
| pci_name(psdev->dev)); |
| } |
| spin_unlock_irqrestore(&pcistub_devices_lock, flags); |
| return count; |
| } |
| static DRIVER_ATTR(permissive, S_IRUSR | S_IWUSR, permissive_show, |
| permissive_add); |
| |
| static void pcistub_exit(void) |
| { |
| driver_remove_file(&xen_pcibk_pci_driver.driver, &driver_attr_new_slot); |
| driver_remove_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_remove_slot); |
| driver_remove_file(&xen_pcibk_pci_driver.driver, &driver_attr_slots); |
| driver_remove_file(&xen_pcibk_pci_driver.driver, &driver_attr_quirks); |
| driver_remove_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_permissive); |
| driver_remove_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_irq_handlers); |
| driver_remove_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_irq_handler_state); |
| pci_unregister_driver(&xen_pcibk_pci_driver); |
| } |
| |
| static int __init pcistub_init(void) |
| { |
| int pos = 0; |
| int err = 0; |
| int domain, bus, slot, func; |
| int parsed; |
| |
| if (pci_devs_to_hide && *pci_devs_to_hide) { |
| do { |
| parsed = 0; |
| |
| err = sscanf(pci_devs_to_hide + pos, |
| " (%x:%x:%x.%x) %n", |
| &domain, &bus, &slot, &func, &parsed); |
| switch (err) { |
| case 3: |
| func = -1; |
| sscanf(pci_devs_to_hide + pos, |
| " (%x:%x:%x.*) %n", |
| &domain, &bus, &slot, &parsed); |
| break; |
| case 2: |
| slot = func = -1; |
| sscanf(pci_devs_to_hide + pos, |
| " (%x:%x:*.*) %n", |
| &domain, &bus, &parsed); |
| break; |
| } |
| |
| if (!parsed) { |
| domain = 0; |
| err = sscanf(pci_devs_to_hide + pos, |
| " (%x:%x.%x) %n", |
| &bus, &slot, &func, &parsed); |
| switch (err) { |
| case 2: |
| func = -1; |
| sscanf(pci_devs_to_hide + pos, |
| " (%x:%x.*) %n", |
| &bus, &slot, &parsed); |
| break; |
| case 1: |
| slot = func = -1; |
| sscanf(pci_devs_to_hide + pos, |
| " (%x:*.*) %n", |
| &bus, &parsed); |
| break; |
| } |
| } |
| |
| if (parsed <= 0) |
| goto parse_error; |
| |
| err = pcistub_device_id_add(domain, bus, slot, func); |
| if (err) |
| goto out; |
| |
| pos += parsed; |
| } while (pci_devs_to_hide[pos]); |
| } |
| |
| /* If we're the first PCI Device Driver to register, we're the |
| * first one to get offered PCI devices as they become |
| * available (and thus we can be the first to grab them) |
| */ |
| err = pci_register_driver(&xen_pcibk_pci_driver); |
| if (err < 0) |
| goto out; |
| |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_new_slot); |
| if (!err) |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_remove_slot); |
| if (!err) |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_slots); |
| if (!err) |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_quirks); |
| if (!err) |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_permissive); |
| |
| if (!err) |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_irq_handlers); |
| if (!err) |
| err = driver_create_file(&xen_pcibk_pci_driver.driver, |
| &driver_attr_irq_handler_state); |
| if (err) |
| pcistub_exit(); |
| |
| out: |
| return err; |
| |
| parse_error: |
| printk(KERN_ERR DRV_NAME ": Error parsing pci_devs_to_hide at \"%s\"\n", |
| pci_devs_to_hide + pos); |
| return -EINVAL; |
| } |
| |
| #ifndef MODULE |
| /* |
| * fs_initcall happens before device_initcall |
| * so xen_pcibk *should* get called first (b/c we |
| * want to suck up any device before other drivers |
| * get a chance by being the first pci device |
| * driver to register) |
| */ |
| fs_initcall(pcistub_init); |
| #endif |
| |
| static int __init xen_pcibk_init(void) |
| { |
| int err; |
| |
| if (!xen_initial_domain()) |
| return -ENODEV; |
| |
| err = xen_pcibk_config_init(); |
| if (err) |
| return err; |
| |
| #ifdef MODULE |
| err = pcistub_init(); |
| if (err < 0) |
| return err; |
| #endif |
| |
| pcistub_init_devices_late(); |
| err = xen_pcibk_xenbus_register(); |
| if (err) |
| pcistub_exit(); |
| |
| return err; |
| } |
| |
| static void __exit xen_pcibk_cleanup(void) |
| { |
| xen_pcibk_xenbus_unregister(); |
| pcistub_exit(); |
| } |
| |
| module_init(xen_pcibk_init); |
| module_exit(xen_pcibk_cleanup); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_ALIAS("xen-backend:pci"); |