| /* |
| * QLogic iSCSI HBA Driver |
| * Copyright (c) 2003-2010 QLogic Corporation |
| * |
| * See LICENSE.qla4xxx for copyright and licensing details. |
| */ |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/pci.h> |
| #include "ql4_def.h" |
| #include "ql4_glbl.h" |
| |
| #define MASK(n) DMA_BIT_MASK(n) |
| #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff)) |
| #define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff)) |
| #define MS_WIN(addr) (addr & 0x0ffc0000) |
| #define QLA82XX_PCI_MN_2M (0) |
| #define QLA82XX_PCI_MS_2M (0x80000) |
| #define QLA82XX_PCI_OCM0_2M (0xc0000) |
| #define VALID_OCM_ADDR(addr) (((addr) & 0x3f800) != 0x3f800) |
| #define GET_MEM_OFFS_2M(addr) (addr & MASK(18)) |
| |
| /* CRB window related */ |
| #define CRB_BLK(off) ((off >> 20) & 0x3f) |
| #define CRB_SUBBLK(off) ((off >> 16) & 0xf) |
| #define CRB_WINDOW_2M (0x130060) |
| #define CRB_HI(off) ((qla4_8xxx_crb_hub_agt[CRB_BLK(off)] << 20) | \ |
| ((off) & 0xf0000)) |
| #define QLA82XX_PCI_CAMQM_2M_END (0x04800800UL) |
| #define QLA82XX_PCI_CAMQM_2M_BASE (0x000ff800UL) |
| #define CRB_INDIRECT_2M (0x1e0000UL) |
| |
| static inline void __iomem * |
| qla4_8xxx_pci_base_offsetfset(struct scsi_qla_host *ha, unsigned long off) |
| { |
| if ((off < ha->first_page_group_end) && |
| (off >= ha->first_page_group_start)) |
| return (void __iomem *)(ha->nx_pcibase + off); |
| |
| return NULL; |
| } |
| |
| #define MAX_CRB_XFORM 60 |
| static unsigned long crb_addr_xform[MAX_CRB_XFORM]; |
| static int qla4_8xxx_crb_table_initialized; |
| |
| #define qla4_8xxx_crb_addr_transform(name) \ |
| (crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \ |
| QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20) |
| static void |
| qla4_8xxx_crb_addr_transform_setup(void) |
| { |
| qla4_8xxx_crb_addr_transform(XDMA); |
| qla4_8xxx_crb_addr_transform(TIMR); |
| qla4_8xxx_crb_addr_transform(SRE); |
| qla4_8xxx_crb_addr_transform(SQN3); |
| qla4_8xxx_crb_addr_transform(SQN2); |
| qla4_8xxx_crb_addr_transform(SQN1); |
| qla4_8xxx_crb_addr_transform(SQN0); |
| qla4_8xxx_crb_addr_transform(SQS3); |
| qla4_8xxx_crb_addr_transform(SQS2); |
| qla4_8xxx_crb_addr_transform(SQS1); |
| qla4_8xxx_crb_addr_transform(SQS0); |
| qla4_8xxx_crb_addr_transform(RPMX7); |
| qla4_8xxx_crb_addr_transform(RPMX6); |
| qla4_8xxx_crb_addr_transform(RPMX5); |
| qla4_8xxx_crb_addr_transform(RPMX4); |
| qla4_8xxx_crb_addr_transform(RPMX3); |
| qla4_8xxx_crb_addr_transform(RPMX2); |
| qla4_8xxx_crb_addr_transform(RPMX1); |
| qla4_8xxx_crb_addr_transform(RPMX0); |
| qla4_8xxx_crb_addr_transform(ROMUSB); |
| qla4_8xxx_crb_addr_transform(SN); |
| qla4_8xxx_crb_addr_transform(QMN); |
| qla4_8xxx_crb_addr_transform(QMS); |
| qla4_8xxx_crb_addr_transform(PGNI); |
| qla4_8xxx_crb_addr_transform(PGND); |
| qla4_8xxx_crb_addr_transform(PGN3); |
| qla4_8xxx_crb_addr_transform(PGN2); |
| qla4_8xxx_crb_addr_transform(PGN1); |
| qla4_8xxx_crb_addr_transform(PGN0); |
| qla4_8xxx_crb_addr_transform(PGSI); |
| qla4_8xxx_crb_addr_transform(PGSD); |
| qla4_8xxx_crb_addr_transform(PGS3); |
| qla4_8xxx_crb_addr_transform(PGS2); |
| qla4_8xxx_crb_addr_transform(PGS1); |
| qla4_8xxx_crb_addr_transform(PGS0); |
| qla4_8xxx_crb_addr_transform(PS); |
| qla4_8xxx_crb_addr_transform(PH); |
| qla4_8xxx_crb_addr_transform(NIU); |
| qla4_8xxx_crb_addr_transform(I2Q); |
| qla4_8xxx_crb_addr_transform(EG); |
| qla4_8xxx_crb_addr_transform(MN); |
| qla4_8xxx_crb_addr_transform(MS); |
| qla4_8xxx_crb_addr_transform(CAS2); |
| qla4_8xxx_crb_addr_transform(CAS1); |
| qla4_8xxx_crb_addr_transform(CAS0); |
| qla4_8xxx_crb_addr_transform(CAM); |
| qla4_8xxx_crb_addr_transform(C2C1); |
| qla4_8xxx_crb_addr_transform(C2C0); |
| qla4_8xxx_crb_addr_transform(SMB); |
| qla4_8xxx_crb_addr_transform(OCM0); |
| qla4_8xxx_crb_addr_transform(I2C0); |
| |
| qla4_8xxx_crb_table_initialized = 1; |
| } |
| |
| static struct crb_128M_2M_block_map crb_128M_2M_map[64] = { |
| {{{0, 0, 0, 0} } }, /* 0: PCI */ |
| {{{1, 0x0100000, 0x0102000, 0x120000}, /* 1: PCIE */ |
| {1, 0x0110000, 0x0120000, 0x130000}, |
| {1, 0x0120000, 0x0122000, 0x124000}, |
| {1, 0x0130000, 0x0132000, 0x126000}, |
| {1, 0x0140000, 0x0142000, 0x128000}, |
| {1, 0x0150000, 0x0152000, 0x12a000}, |
| {1, 0x0160000, 0x0170000, 0x110000}, |
| {1, 0x0170000, 0x0172000, 0x12e000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x01e0000, 0x01e0800, 0x122000}, |
| {0, 0x0000000, 0x0000000, 0x000000} } }, |
| {{{1, 0x0200000, 0x0210000, 0x180000} } },/* 2: MN */ |
| {{{0, 0, 0, 0} } }, /* 3: */ |
| {{{1, 0x0400000, 0x0401000, 0x169000} } },/* 4: P2NR1 */ |
| {{{1, 0x0500000, 0x0510000, 0x140000} } },/* 5: SRE */ |
| {{{1, 0x0600000, 0x0610000, 0x1c0000} } },/* 6: NIU */ |
| {{{1, 0x0700000, 0x0704000, 0x1b8000} } },/* 7: QM */ |
| {{{1, 0x0800000, 0x0802000, 0x170000}, /* 8: SQM0 */ |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x08f0000, 0x08f2000, 0x172000} } }, |
| {{{1, 0x0900000, 0x0902000, 0x174000}, /* 9: SQM1*/ |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x09f0000, 0x09f2000, 0x176000} } }, |
| {{{0, 0x0a00000, 0x0a02000, 0x178000}, /* 10: SQM2*/ |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x0af0000, 0x0af2000, 0x17a000} } }, |
| {{{0, 0x0b00000, 0x0b02000, 0x17c000}, /* 11: SQM3*/ |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x0bf0000, 0x0bf2000, 0x17e000} } }, |
| {{{1, 0x0c00000, 0x0c04000, 0x1d4000} } },/* 12: I2Q */ |
| {{{1, 0x0d00000, 0x0d04000, 0x1a4000} } },/* 13: TMR */ |
| {{{1, 0x0e00000, 0x0e04000, 0x1a0000} } },/* 14: ROMUSB */ |
| {{{1, 0x0f00000, 0x0f01000, 0x164000} } },/* 15: PEG4 */ |
| {{{0, 0x1000000, 0x1004000, 0x1a8000} } },/* 16: XDMA */ |
| {{{1, 0x1100000, 0x1101000, 0x160000} } },/* 17: PEG0 */ |
| {{{1, 0x1200000, 0x1201000, 0x161000} } },/* 18: PEG1 */ |
| {{{1, 0x1300000, 0x1301000, 0x162000} } },/* 19: PEG2 */ |
| {{{1, 0x1400000, 0x1401000, 0x163000} } },/* 20: PEG3 */ |
| {{{1, 0x1500000, 0x1501000, 0x165000} } },/* 21: P2ND */ |
| {{{1, 0x1600000, 0x1601000, 0x166000} } },/* 22: P2NI */ |
| {{{0, 0, 0, 0} } }, /* 23: */ |
| {{{0, 0, 0, 0} } }, /* 24: */ |
| {{{0, 0, 0, 0} } }, /* 25: */ |
| {{{0, 0, 0, 0} } }, /* 26: */ |
| {{{0, 0, 0, 0} } }, /* 27: */ |
| {{{0, 0, 0, 0} } }, /* 28: */ |
| {{{1, 0x1d00000, 0x1d10000, 0x190000} } },/* 29: MS */ |
| {{{1, 0x1e00000, 0x1e01000, 0x16a000} } },/* 30: P2NR2 */ |
| {{{1, 0x1f00000, 0x1f10000, 0x150000} } },/* 31: EPG */ |
| {{{0} } }, /* 32: PCI */ |
| {{{1, 0x2100000, 0x2102000, 0x120000}, /* 33: PCIE */ |
| {1, 0x2110000, 0x2120000, 0x130000}, |
| {1, 0x2120000, 0x2122000, 0x124000}, |
| {1, 0x2130000, 0x2132000, 0x126000}, |
| {1, 0x2140000, 0x2142000, 0x128000}, |
| {1, 0x2150000, 0x2152000, 0x12a000}, |
| {1, 0x2160000, 0x2170000, 0x110000}, |
| {1, 0x2170000, 0x2172000, 0x12e000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000} } }, |
| {{{1, 0x2200000, 0x2204000, 0x1b0000} } },/* 34: CAM */ |
| {{{0} } }, /* 35: */ |
| {{{0} } }, /* 36: */ |
| {{{0} } }, /* 37: */ |
| {{{0} } }, /* 38: */ |
| {{{0} } }, /* 39: */ |
| {{{1, 0x2800000, 0x2804000, 0x1a4000} } },/* 40: TMR */ |
| {{{1, 0x2900000, 0x2901000, 0x16b000} } },/* 41: P2NR3 */ |
| {{{1, 0x2a00000, 0x2a00400, 0x1ac400} } },/* 42: RPMX1 */ |
| {{{1, 0x2b00000, 0x2b00400, 0x1ac800} } },/* 43: RPMX2 */ |
| {{{1, 0x2c00000, 0x2c00400, 0x1acc00} } },/* 44: RPMX3 */ |
| {{{1, 0x2d00000, 0x2d00400, 0x1ad000} } },/* 45: RPMX4 */ |
| {{{1, 0x2e00000, 0x2e00400, 0x1ad400} } },/* 46: RPMX5 */ |
| {{{1, 0x2f00000, 0x2f00400, 0x1ad800} } },/* 47: RPMX6 */ |
| {{{1, 0x3000000, 0x3000400, 0x1adc00} } },/* 48: RPMX7 */ |
| {{{0, 0x3100000, 0x3104000, 0x1a8000} } },/* 49: XDMA */ |
| {{{1, 0x3200000, 0x3204000, 0x1d4000} } },/* 50: I2Q */ |
| {{{1, 0x3300000, 0x3304000, 0x1a0000} } },/* 51: ROMUSB */ |
| {{{0} } }, /* 52: */ |
| {{{1, 0x3500000, 0x3500400, 0x1ac000} } },/* 53: RPMX0 */ |
| {{{1, 0x3600000, 0x3600400, 0x1ae000} } },/* 54: RPMX8 */ |
| {{{1, 0x3700000, 0x3700400, 0x1ae400} } },/* 55: RPMX9 */ |
| {{{1, 0x3800000, 0x3804000, 0x1d0000} } },/* 56: OCM0 */ |
| {{{1, 0x3900000, 0x3904000, 0x1b4000} } },/* 57: CRYPTO */ |
| {{{1, 0x3a00000, 0x3a04000, 0x1d8000} } },/* 58: SMB */ |
| {{{0} } }, /* 59: I2C0 */ |
| {{{0} } }, /* 60: I2C1 */ |
| {{{1, 0x3d00000, 0x3d04000, 0x1dc000} } },/* 61: LPC */ |
| {{{1, 0x3e00000, 0x3e01000, 0x167000} } },/* 62: P2NC */ |
| {{{1, 0x3f00000, 0x3f01000, 0x168000} } } /* 63: P2NR0 */ |
| }; |
| |
| /* |
| * top 12 bits of crb internal address (hub, agent) |
| */ |
| static unsigned qla4_8xxx_crb_hub_agt[64] = { |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PS, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_MN, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_MS, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SRE, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_NIU, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_QMN, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN3, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN4, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN3, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGND, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGNI, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS3, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGSI, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SN, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_EG, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PS, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_CAM, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX3, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX4, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX5, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX6, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX7, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX8, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX9, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_OCM0, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SMB, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2C0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2C1, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGNC, |
| 0, |
| }; |
| |
| /* Device states */ |
| static char *qdev_state[] = { |
| "Unknown", |
| "Cold", |
| "Initializing", |
| "Ready", |
| "Need Reset", |
| "Need Quiescent", |
| "Failed", |
| "Quiescent", |
| }; |
| |
| /* |
| * In: 'off' is offset from CRB space in 128M pci map |
| * Out: 'off' is 2M pci map addr |
| * side effect: lock crb window |
| */ |
| static void |
| qla4_8xxx_pci_set_crbwindow_2M(struct scsi_qla_host *ha, ulong *off) |
| { |
| u32 win_read; |
| |
| ha->crb_win = CRB_HI(*off); |
| writel(ha->crb_win, |
| (void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase)); |
| |
| /* Read back value to make sure write has gone through before trying |
| * to use it. */ |
| win_read = readl((void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase)); |
| if (win_read != ha->crb_win) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Written crbwin (0x%x) != Read crbwin (0x%x)," |
| " off=0x%lx\n", __func__, ha->crb_win, win_read, *off)); |
| } |
| *off = (*off & MASK(16)) + CRB_INDIRECT_2M + ha->nx_pcibase; |
| } |
| |
| void |
| qla4_8xxx_wr_32(struct scsi_qla_host *ha, ulong off, u32 data) |
| { |
| unsigned long flags = 0; |
| int rv; |
| |
| rv = qla4_8xxx_pci_get_crb_addr_2M(ha, &off); |
| |
| BUG_ON(rv == -1); |
| |
| if (rv == 1) { |
| write_lock_irqsave(&ha->hw_lock, flags); |
| qla4_8xxx_crb_win_lock(ha); |
| qla4_8xxx_pci_set_crbwindow_2M(ha, &off); |
| } |
| |
| writel(data, (void __iomem *)off); |
| |
| if (rv == 1) { |
| qla4_8xxx_crb_win_unlock(ha); |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| } |
| } |
| |
| int |
| qla4_8xxx_rd_32(struct scsi_qla_host *ha, ulong off) |
| { |
| unsigned long flags = 0; |
| int rv; |
| u32 data; |
| |
| rv = qla4_8xxx_pci_get_crb_addr_2M(ha, &off); |
| |
| BUG_ON(rv == -1); |
| |
| if (rv == 1) { |
| write_lock_irqsave(&ha->hw_lock, flags); |
| qla4_8xxx_crb_win_lock(ha); |
| qla4_8xxx_pci_set_crbwindow_2M(ha, &off); |
| } |
| data = readl((void __iomem *)off); |
| |
| if (rv == 1) { |
| qla4_8xxx_crb_win_unlock(ha); |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| } |
| return data; |
| } |
| |
| #define CRB_WIN_LOCK_TIMEOUT 100000000 |
| |
| int qla4_8xxx_crb_win_lock(struct scsi_qla_host *ha) |
| { |
| int i; |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore3 from PCI HW block */ |
| done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_LOCK)); |
| if (done == 1) |
| break; |
| if (timeout >= CRB_WIN_LOCK_TIMEOUT) |
| return -1; |
| |
| timeout++; |
| |
| /* Yield CPU */ |
| if (!in_interrupt()) |
| schedule(); |
| else { |
| for (i = 0; i < 20; i++) |
| cpu_relax(); /*This a nop instr on i386*/ |
| } |
| } |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_WIN_LOCK_ID, ha->func_num); |
| return 0; |
| } |
| |
| void qla4_8xxx_crb_win_unlock(struct scsi_qla_host *ha) |
| { |
| qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_UNLOCK)); |
| } |
| |
| #define IDC_LOCK_TIMEOUT 100000000 |
| |
| /** |
| * qla4_8xxx_idc_lock - hw_lock |
| * @ha: pointer to adapter structure |
| * |
| * General purpose lock used to synchronize access to |
| * CRB_DEV_STATE, CRB_DEV_REF_COUNT, etc. |
| **/ |
| int qla4_8xxx_idc_lock(struct scsi_qla_host *ha) |
| { |
| int i; |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore5 from PCI HW block */ |
| done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_LOCK)); |
| if (done == 1) |
| break; |
| if (timeout >= IDC_LOCK_TIMEOUT) |
| return -1; |
| |
| timeout++; |
| |
| /* Yield CPU */ |
| if (!in_interrupt()) |
| schedule(); |
| else { |
| for (i = 0; i < 20; i++) |
| cpu_relax(); /*This a nop instr on i386*/ |
| } |
| } |
| return 0; |
| } |
| |
| void qla4_8xxx_idc_unlock(struct scsi_qla_host *ha) |
| { |
| qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_UNLOCK)); |
| } |
| |
| int |
| qla4_8xxx_pci_get_crb_addr_2M(struct scsi_qla_host *ha, ulong *off) |
| { |
| struct crb_128M_2M_sub_block_map *m; |
| |
| if (*off >= QLA82XX_CRB_MAX) |
| return -1; |
| |
| if (*off >= QLA82XX_PCI_CAMQM && (*off < QLA82XX_PCI_CAMQM_2M_END)) { |
| *off = (*off - QLA82XX_PCI_CAMQM) + |
| QLA82XX_PCI_CAMQM_2M_BASE + ha->nx_pcibase; |
| return 0; |
| } |
| |
| if (*off < QLA82XX_PCI_CRBSPACE) |
| return -1; |
| |
| *off -= QLA82XX_PCI_CRBSPACE; |
| /* |
| * Try direct map |
| */ |
| |
| m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)]; |
| |
| if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) { |
| *off = *off + m->start_2M - m->start_128M + ha->nx_pcibase; |
| return 0; |
| } |
| |
| /* |
| * Not in direct map, use crb window |
| */ |
| return 1; |
| } |
| |
| /* PCI Windowing for DDR regions. */ |
| #define QLA82XX_ADDR_IN_RANGE(addr, low, high) \ |
| (((addr) <= (high)) && ((addr) >= (low))) |
| |
| /* |
| * check memory access boundary. |
| * used by test agent. support ddr access only for now |
| */ |
| static unsigned long |
| qla4_8xxx_pci_mem_bound_check(struct scsi_qla_host *ha, |
| unsigned long long addr, int size) |
| { |
| if (!QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX) || |
| !QLA82XX_ADDR_IN_RANGE(addr + size - 1, |
| QLA82XX_ADDR_DDR_NET, QLA82XX_ADDR_DDR_NET_MAX) || |
| ((size != 1) && (size != 2) && (size != 4) && (size != 8))) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int qla4_8xxx_pci_set_window_warning_count; |
| |
| static unsigned long |
| qla4_8xxx_pci_set_window(struct scsi_qla_host *ha, unsigned long long addr) |
| { |
| int window; |
| u32 win_read; |
| |
| if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX)) { |
| /* DDR network side */ |
| window = MN_WIN(addr); |
| ha->ddr_mn_window = window; |
| qla4_8xxx_wr_32(ha, ha->mn_win_crb | |
| QLA82XX_PCI_CRBSPACE, window); |
| win_read = qla4_8xxx_rd_32(ha, ha->mn_win_crb | |
| QLA82XX_PCI_CRBSPACE); |
| if ((win_read << 17) != window) { |
| ql4_printk(KERN_WARNING, ha, |
| "%s: Written MNwin (0x%x) != Read MNwin (0x%x)\n", |
| __func__, window, win_read); |
| } |
| addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_DDR_NET; |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, |
| QLA82XX_ADDR_OCM0_MAX)) { |
| unsigned int temp1; |
| /* if bits 19:18&17:11 are on */ |
| if ((addr & 0x00ff800) == 0xff800) { |
| printk("%s: QM access not handled.\n", __func__); |
| addr = -1UL; |
| } |
| |
| window = OCM_WIN(addr); |
| ha->ddr_mn_window = window; |
| qla4_8xxx_wr_32(ha, ha->mn_win_crb | |
| QLA82XX_PCI_CRBSPACE, window); |
| win_read = qla4_8xxx_rd_32(ha, ha->mn_win_crb | |
| QLA82XX_PCI_CRBSPACE); |
| temp1 = ((window & 0x1FF) << 7) | |
| ((window & 0x0FFFE0000) >> 17); |
| if (win_read != temp1) { |
| printk("%s: Written OCMwin (0x%x) != Read" |
| " OCMwin (0x%x)\n", __func__, temp1, win_read); |
| } |
| addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_OCM0_2M; |
| |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, |
| QLA82XX_P3_ADDR_QDR_NET_MAX)) { |
| /* QDR network side */ |
| window = MS_WIN(addr); |
| ha->qdr_sn_window = window; |
| qla4_8xxx_wr_32(ha, ha->ms_win_crb | |
| QLA82XX_PCI_CRBSPACE, window); |
| win_read = qla4_8xxx_rd_32(ha, |
| ha->ms_win_crb | QLA82XX_PCI_CRBSPACE); |
| if (win_read != window) { |
| printk("%s: Written MSwin (0x%x) != Read " |
| "MSwin (0x%x)\n", __func__, window, win_read); |
| } |
| addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_QDR_NET; |
| |
| } else { |
| /* |
| * peg gdb frequently accesses memory that doesn't exist, |
| * this limits the chit chat so debugging isn't slowed down. |
| */ |
| if ((qla4_8xxx_pci_set_window_warning_count++ < 8) || |
| (qla4_8xxx_pci_set_window_warning_count%64 == 0)) { |
| printk("%s: Warning:%s Unknown address range!\n", |
| __func__, DRIVER_NAME); |
| } |
| addr = -1UL; |
| } |
| return addr; |
| } |
| |
| /* check if address is in the same windows as the previous access */ |
| static int qla4_8xxx_pci_is_same_window(struct scsi_qla_host *ha, |
| unsigned long long addr) |
| { |
| int window; |
| unsigned long long qdr_max; |
| |
| qdr_max = QLA82XX_P3_ADDR_QDR_NET_MAX; |
| |
| if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX)) { |
| /* DDR network side */ |
| BUG(); /* MN access can not come here */ |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, |
| QLA82XX_ADDR_OCM0_MAX)) { |
| return 1; |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM1, |
| QLA82XX_ADDR_OCM1_MAX)) { |
| return 1; |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, |
| qdr_max)) { |
| /* QDR network side */ |
| window = ((addr - QLA82XX_ADDR_QDR_NET) >> 22) & 0x3f; |
| if (ha->qdr_sn_window == window) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| #ifndef readq |
| static inline __u64 readq(const volatile void __iomem *addr) |
| { |
| const volatile u32 __iomem *p = addr; |
| u32 low, high; |
| |
| low = readl(p); |
| high = readl(p + 1); |
| |
| return low + ((u64)high << 32); |
| } |
| #endif |
| |
| #ifndef writeq |
| static inline void writeq(__u64 val, volatile void __iomem *addr) |
| { |
| writel(val, addr); |
| writel(val >> 32, addr+4); |
| } |
| #endif |
| |
| static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha, |
| u64 off, void *data, int size) |
| { |
| unsigned long flags; |
| void __iomem *addr; |
| int ret = 0; |
| u64 start; |
| void __iomem *mem_ptr = NULL; |
| unsigned long mem_base; |
| unsigned long mem_page; |
| |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| /* |
| * If attempting to access unknown address or straddle hw windows, |
| * do not access. |
| */ |
| start = qla4_8xxx_pci_set_window(ha, off); |
| if ((start == -1UL) || |
| (qla4_8xxx_pci_is_same_window(ha, off + size - 1) == 0)) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| printk(KERN_ERR"%s out of bound pci memory access. " |
| "offset is 0x%llx\n", DRIVER_NAME, off); |
| return -1; |
| } |
| |
| addr = qla4_8xxx_pci_base_offsetfset(ha, start); |
| if (!addr) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| mem_base = pci_resource_start(ha->pdev, 0); |
| mem_page = start & PAGE_MASK; |
| /* Map two pages whenever user tries to access addresses in two |
| consecutive pages. |
| */ |
| if (mem_page != ((start + size - 1) & PAGE_MASK)) |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); |
| else |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); |
| |
| if (mem_ptr == NULL) { |
| *(u8 *)data = 0; |
| return -1; |
| } |
| addr = mem_ptr; |
| addr += start & (PAGE_SIZE - 1); |
| write_lock_irqsave(&ha->hw_lock, flags); |
| } |
| |
| switch (size) { |
| case 1: |
| *(u8 *)data = readb(addr); |
| break; |
| case 2: |
| *(u16 *)data = readw(addr); |
| break; |
| case 4: |
| *(u32 *)data = readl(addr); |
| break; |
| case 8: |
| *(u64 *)data = readq(addr); |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| |
| if (mem_ptr) |
| iounmap(mem_ptr); |
| return ret; |
| } |
| |
| static int |
| qla4_8xxx_pci_mem_write_direct(struct scsi_qla_host *ha, u64 off, |
| void *data, int size) |
| { |
| unsigned long flags; |
| void __iomem *addr; |
| int ret = 0; |
| u64 start; |
| void __iomem *mem_ptr = NULL; |
| unsigned long mem_base; |
| unsigned long mem_page; |
| |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| /* |
| * If attempting to access unknown address or straddle hw windows, |
| * do not access. |
| */ |
| start = qla4_8xxx_pci_set_window(ha, off); |
| if ((start == -1UL) || |
| (qla4_8xxx_pci_is_same_window(ha, off + size - 1) == 0)) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| printk(KERN_ERR"%s out of bound pci memory access. " |
| "offset is 0x%llx\n", DRIVER_NAME, off); |
| return -1; |
| } |
| |
| addr = qla4_8xxx_pci_base_offsetfset(ha, start); |
| if (!addr) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| mem_base = pci_resource_start(ha->pdev, 0); |
| mem_page = start & PAGE_MASK; |
| /* Map two pages whenever user tries to access addresses in two |
| consecutive pages. |
| */ |
| if (mem_page != ((start + size - 1) & PAGE_MASK)) |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); |
| else |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); |
| if (mem_ptr == NULL) |
| return -1; |
| |
| addr = mem_ptr; |
| addr += start & (PAGE_SIZE - 1); |
| write_lock_irqsave(&ha->hw_lock, flags); |
| } |
| |
| switch (size) { |
| case 1: |
| writeb(*(u8 *)data, addr); |
| break; |
| case 2: |
| writew(*(u16 *)data, addr); |
| break; |
| case 4: |
| writel(*(u32 *)data, addr); |
| break; |
| case 8: |
| writeq(*(u64 *)data, addr); |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| if (mem_ptr) |
| iounmap(mem_ptr); |
| return ret; |
| } |
| |
| #define MTU_FUDGE_FACTOR 100 |
| |
| static unsigned long |
| qla4_8xxx_decode_crb_addr(unsigned long addr) |
| { |
| int i; |
| unsigned long base_addr, offset, pci_base; |
| |
| if (!qla4_8xxx_crb_table_initialized) |
| qla4_8xxx_crb_addr_transform_setup(); |
| |
| pci_base = ADDR_ERROR; |
| base_addr = addr & 0xfff00000; |
| offset = addr & 0x000fffff; |
| |
| for (i = 0; i < MAX_CRB_XFORM; i++) { |
| if (crb_addr_xform[i] == base_addr) { |
| pci_base = i << 20; |
| break; |
| } |
| } |
| if (pci_base == ADDR_ERROR) |
| return pci_base; |
| else |
| return pci_base + offset; |
| } |
| |
| static long rom_max_timeout = 100; |
| static long qla4_8xxx_rom_lock_timeout = 100; |
| |
| static int |
| qla4_8xxx_rom_lock(struct scsi_qla_host *ha) |
| { |
| int i; |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore2 from PCI HW block */ |
| |
| done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK)); |
| if (done == 1) |
| break; |
| if (timeout >= qla4_8xxx_rom_lock_timeout) { |
| ql4_printk(KERN_WARNING, ha, |
| "%s: Failed to acquire rom lock", __func__); |
| return -1; |
| } |
| |
| timeout++; |
| |
| /* Yield CPU */ |
| if (!in_interrupt()) |
| schedule(); |
| else { |
| for (i = 0; i < 20; i++) |
| cpu_relax(); /*This a nop instr on i386*/ |
| } |
| } |
| qla4_8xxx_wr_32(ha, QLA82XX_ROM_LOCK_ID, ROM_LOCK_DRIVER); |
| return 0; |
| } |
| |
| static void |
| qla4_8xxx_rom_unlock(struct scsi_qla_host *ha) |
| { |
| qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| } |
| |
| static int |
| qla4_8xxx_wait_rom_done(struct scsi_qla_host *ha) |
| { |
| long timeout = 0; |
| long done = 0 ; |
| |
| while (done == 0) { |
| done = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_GLB_STATUS); |
| done &= 2; |
| timeout++; |
| if (timeout >= rom_max_timeout) { |
| printk("%s: Timeout reached waiting for rom done", |
| DRIVER_NAME); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| static int |
| qla4_8xxx_do_rom_fast_read(struct scsi_qla_host *ha, int addr, int *valp) |
| { |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0xb); |
| if (qla4_8xxx_wait_rom_done(ha)) { |
| printk("%s: Error waiting for rom done\n", DRIVER_NAME); |
| return -1; |
| } |
| /* reset abyte_cnt and dummy_byte_cnt */ |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| udelay(10); |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); |
| |
| *valp = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); |
| return 0; |
| } |
| |
| static int |
| qla4_8xxx_rom_fast_read(struct scsi_qla_host *ha, int addr, int *valp) |
| { |
| int ret, loops = 0; |
| |
| while ((qla4_8xxx_rom_lock(ha) != 0) && (loops < 50000)) { |
| udelay(100); |
| loops++; |
| } |
| if (loops >= 50000) { |
| printk("%s: qla4_8xxx_rom_lock failed\n", DRIVER_NAME); |
| return -1; |
| } |
| ret = qla4_8xxx_do_rom_fast_read(ha, addr, valp); |
| qla4_8xxx_rom_unlock(ha); |
| return ret; |
| } |
| |
| /** |
| * This routine does CRB initialize sequence |
| * to put the ISP into operational state |
| **/ |
| static int |
| qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) |
| { |
| int addr, val; |
| int i ; |
| struct crb_addr_pair *buf; |
| unsigned long off; |
| unsigned offset, n; |
| |
| struct crb_addr_pair { |
| long addr; |
| long data; |
| }; |
| |
| /* Halt all the indiviual PEGs and other blocks of the ISP */ |
| qla4_8xxx_rom_lock(ha); |
| |
| /* disable all I2Q */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x10, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x14, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x18, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x1c, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x20, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x24, 0x0); |
| |
| /* disable all niu interrupts */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff); |
| /* disable xge rx/tx */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00); |
| /* disable xg1 rx/tx */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00); |
| /* disable sideband mac */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x90000, 0x00); |
| /* disable ap0 mac */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0xa0000, 0x00); |
| /* disable ap1 mac */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0xb0000, 0x00); |
| |
| /* halt sre */ |
| val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_SRE + 0x1000, val & (~(0x1))); |
| |
| /* halt epg */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_EPG + 0x1300, 0x1); |
| |
| /* halt timers */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x0, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x8, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x200, 0x0); |
| |
| /* halt pegs */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_1 + 0x3c, 1); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1); |
| msleep(5); |
| |
| /* big hammer */ |
| if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) |
| /* don't reset CAM block on reset */ |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); |
| else |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); |
| |
| /* reset ms */ |
| val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); |
| val |= (1 << 1); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); |
| |
| msleep(20); |
| /* unreset ms */ |
| val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); |
| val &= ~(1 << 1); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); |
| msleep(20); |
| |
| qla4_8xxx_rom_unlock(ha); |
| |
| /* Read the signature value from the flash. |
| * Offset 0: Contain signature (0xcafecafe) |
| * Offset 4: Offset and number of addr/value pairs |
| * that present in CRB initialize sequence |
| */ |
| if (qla4_8xxx_rom_fast_read(ha, 0, &n) != 0 || n != 0xcafecafeUL || |
| qla4_8xxx_rom_fast_read(ha, 4, &n) != 0) { |
| ql4_printk(KERN_WARNING, ha, |
| "[ERROR] Reading crb_init area: n: %08x\n", n); |
| return -1; |
| } |
| |
| /* Offset in flash = lower 16 bits |
| * Number of enteries = upper 16 bits |
| */ |
| offset = n & 0xffffU; |
| n = (n >> 16) & 0xffffU; |
| |
| /* number of addr/value pair should not exceed 1024 enteries */ |
| if (n >= 1024) { |
| ql4_printk(KERN_WARNING, ha, |
| "%s: %s:n=0x%x [ERROR] Card flash not initialized.\n", |
| DRIVER_NAME, __func__, n); |
| return -1; |
| } |
| |
| ql4_printk(KERN_INFO, ha, |
| "%s: %d CRB init values found in ROM.\n", DRIVER_NAME, n); |
| |
| buf = kmalloc(n * sizeof(struct crb_addr_pair), GFP_KERNEL); |
| if (buf == NULL) { |
| ql4_printk(KERN_WARNING, ha, |
| "%s: [ERROR] Unable to malloc memory.\n", DRIVER_NAME); |
| return -1; |
| } |
| |
| for (i = 0; i < n; i++) { |
| if (qla4_8xxx_rom_fast_read(ha, 8*i + 4*offset, &val) != 0 || |
| qla4_8xxx_rom_fast_read(ha, 8*i + 4*offset + 4, &addr) != |
| 0) { |
| kfree(buf); |
| return -1; |
| } |
| |
| buf[i].addr = addr; |
| buf[i].data = val; |
| } |
| |
| for (i = 0; i < n; i++) { |
| /* Translate internal CRB initialization |
| * address to PCI bus address |
| */ |
| off = qla4_8xxx_decode_crb_addr((unsigned long)buf[i].addr) + |
| QLA82XX_PCI_CRBSPACE; |
| /* Not all CRB addr/value pair to be written, |
| * some of them are skipped |
| */ |
| |
| /* skip if LS bit is set*/ |
| if (off & 0x1) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, |
| "Skip CRB init replay for offset = 0x%lx\n", off)); |
| continue; |
| } |
| |
| /* skipping cold reboot MAGIC */ |
| if (off == QLA82XX_CAM_RAM(0x1fc)) |
| continue; |
| |
| /* do not reset PCI */ |
| if (off == (ROMUSB_GLB + 0xbc)) |
| continue; |
| |
| /* skip core clock, so that firmware can increase the clock */ |
| if (off == (ROMUSB_GLB + 0xc8)) |
| continue; |
| |
| /* skip the function enable register */ |
| if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION)) |
| continue; |
| |
| if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION2)) |
| continue; |
| |
| if ((off & 0x0ff00000) == QLA82XX_CRB_SMB) |
| continue; |
| |
| if ((off & 0x0ff00000) == QLA82XX_CRB_DDR_NET) |
| continue; |
| |
| if (off == ADDR_ERROR) { |
| ql4_printk(KERN_WARNING, ha, |
| "%s: [ERROR] Unknown addr: 0x%08lx\n", |
| DRIVER_NAME, buf[i].addr); |
| continue; |
| } |
| |
| qla4_8xxx_wr_32(ha, off, buf[i].data); |
| |
| /* ISP requires much bigger delay to settle down, |
| * else crb_window returns 0xffffffff |
| */ |
| if (off == QLA82XX_ROMUSB_GLB_SW_RESET) |
| msleep(1000); |
| |
| /* ISP requires millisec delay between |
| * successive CRB register updation |
| */ |
| msleep(1); |
| } |
| |
| kfree(buf); |
| |
| /* Resetting the data and instruction cache */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0xec, 0x1e); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0x4c, 8); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_I+0x4c, 8); |
| |
| /* Clear all protocol processing engines */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0x8, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0xc, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0x8, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0xc, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0x8, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0xc, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0x8, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0xc, 0); |
| |
| return 0; |
| } |
| |
| static int |
| qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start) |
| { |
| int i, rval = 0; |
| long size = 0; |
| long flashaddr, memaddr; |
| u64 data; |
| u32 high, low; |
| |
| flashaddr = memaddr = ha->hw.flt_region_bootload; |
| size = (image_start - flashaddr) / 8; |
| |
| DEBUG2(printk("scsi%ld: %s: bootldr=0x%lx, fw_image=0x%x\n", |
| ha->host_no, __func__, flashaddr, image_start)); |
| |
| for (i = 0; i < size; i++) { |
| if ((qla4_8xxx_rom_fast_read(ha, flashaddr, (int *)&low)) || |
| (qla4_8xxx_rom_fast_read(ha, flashaddr + 4, |
| (int *)&high))) { |
| rval = -1; |
| goto exit_load_from_flash; |
| } |
| data = ((u64)high << 32) | low ; |
| rval = qla4_8xxx_pci_mem_write_2M(ha, memaddr, &data, 8); |
| if (rval) |
| goto exit_load_from_flash; |
| |
| flashaddr += 8; |
| memaddr += 8; |
| |
| if (i % 0x1000 == 0) |
| msleep(1); |
| |
| } |
| |
| udelay(100); |
| |
| read_lock(&ha->hw_lock); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x18, 0x1020); |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e); |
| read_unlock(&ha->hw_lock); |
| |
| exit_load_from_flash: |
| return rval; |
| } |
| |
| static int qla4_8xxx_load_fw(struct scsi_qla_host *ha, uint32_t image_start) |
| { |
| u32 rst; |
| |
| qla4_8xxx_wr_32(ha, CRB_CMDPEG_STATE, 0); |
| if (qla4_8xxx_pinit_from_rom(ha, 0) != QLA_SUCCESS) { |
| printk(KERN_WARNING "%s: Error during CRB Initialization\n", |
| __func__); |
| return QLA_ERROR; |
| } |
| |
| udelay(500); |
| |
| /* at this point, QM is in reset. This could be a problem if there are |
| * incoming d* transition queue messages. QM/PCIE could wedge. |
| * To get around this, QM is brought out of reset. |
| */ |
| |
| rst = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET); |
| /* unreset qm */ |
| rst &= ~(1 << 28); |
| qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, rst); |
| |
| if (qla4_8xxx_load_from_flash(ha, image_start)) { |
| printk("%s: Error trying to load fw from flash!\n", __func__); |
| return QLA_ERROR; |
| } |
| |
| return QLA_SUCCESS; |
| } |
| |
| int |
| qla4_8xxx_pci_mem_read_2M(struct scsi_qla_host *ha, |
| u64 off, void *data, int size) |
| { |
| int i, j = 0, k, start, end, loop, sz[2], off0[2]; |
| int shift_amount; |
| uint32_t temp; |
| uint64_t off8, val, mem_crb, word[2] = {0, 0}; |
| |
| /* |
| * If not MN, go check for MS or invalid. |
| */ |
| |
| if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) |
| mem_crb = QLA82XX_CRB_QDR_NET; |
| else { |
| mem_crb = QLA82XX_CRB_DDR_NET; |
| if (qla4_8xxx_pci_mem_bound_check(ha, off, size) == 0) |
| return qla4_8xxx_pci_mem_read_direct(ha, |
| off, data, size); |
| } |
| |
| |
| off8 = off & 0xfffffff0; |
| off0[0] = off & 0xf; |
| sz[0] = (size < (16 - off0[0])) ? size : (16 - off0[0]); |
| shift_amount = 4; |
| |
| loop = ((off0[0] + size - 1) >> shift_amount) + 1; |
| off0[1] = 0; |
| sz[1] = size - sz[0]; |
| |
| for (i = 0; i < loop; i++) { |
| temp = off8 + (i << shift_amount); |
| qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp); |
| temp = 0; |
| qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_HI, temp); |
| temp = MIU_TA_CTL_ENABLE; |
| qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE; |
| qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| temp = qla4_8xxx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); |
| if ((temp & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| if (printk_ratelimit()) |
| ql4_printk(KERN_ERR, ha, |
| "failed to read through agent\n"); |
| break; |
| } |
| |
| start = off0[i] >> 2; |
| end = (off0[i] + sz[i] - 1) >> 2; |
| for (k = start; k <= end; k++) { |
| temp = qla4_8xxx_rd_32(ha, |
| mem_crb + MIU_TEST_AGT_RDDATA(k)); |
| word[i] |= ((uint64_t)temp << (32 * (k & 1))); |
| } |
| } |
| |
| if (j >= MAX_CTL_CHECK) |
| return -1; |
| |
| if ((off0[0] & 7) == 0) { |
| val = word[0]; |
| } else { |
| val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) | |
| ((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8)); |
| } |
| |
| switch (size) { |
| case 1: |
| *(uint8_t *)data = val; |
| break; |
| case 2: |
| *(uint16_t *)data = val; |
| break; |
| case 4: |
| *(uint32_t *)data = val; |
| break; |
| case 8: |
| *(uint64_t *)data = val; |
| break; |
| } |
| return 0; |
| } |
| |
| int |
| qla4_8xxx_pci_mem_write_2M(struct scsi_qla_host *ha, |
| u64 off, void *data, int size) |
| { |
| int i, j, ret = 0, loop, sz[2], off0; |
| int scale, shift_amount, startword; |
| uint32_t temp; |
| uint64_t off8, mem_crb, tmpw, word[2] = {0, 0}; |
| |
| /* |
| * If not MN, go check for MS or invalid. |
| */ |
| if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) |
| mem_crb = QLA82XX_CRB_QDR_NET; |
| else { |
| mem_crb = QLA82XX_CRB_DDR_NET; |
| if (qla4_8xxx_pci_mem_bound_check(ha, off, size) == 0) |
| return qla4_8xxx_pci_mem_write_direct(ha, |
| off, data, size); |
| } |
| |
| off0 = off & 0x7; |
| sz[0] = (size < (8 - off0)) ? size : (8 - off0); |
| sz[1] = size - sz[0]; |
| |
| off8 = off & 0xfffffff0; |
| loop = (((off & 0xf) + size - 1) >> 4) + 1; |
| shift_amount = 4; |
| scale = 2; |
| startword = (off & 0xf)/8; |
| |
| for (i = 0; i < loop; i++) { |
| if (qla4_8xxx_pci_mem_read_2M(ha, off8 + |
| (i << shift_amount), &word[i * scale], 8)) |
| return -1; |
| } |
| |
| switch (size) { |
| case 1: |
| tmpw = *((uint8_t *)data); |
| break; |
| case 2: |
| tmpw = *((uint16_t *)data); |
| break; |
| case 4: |
| tmpw = *((uint32_t *)data); |
| break; |
| case 8: |
| default: |
| tmpw = *((uint64_t *)data); |
| break; |
| } |
| |
| if (sz[0] == 8) |
| word[startword] = tmpw; |
| else { |
| word[startword] &= |
| ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); |
| word[startword] |= tmpw << (off0 * 8); |
| } |
| |
| if (sz[1] != 0) { |
| word[startword+1] &= ~(~0ULL << (sz[1] * 8)); |
| word[startword+1] |= tmpw >> (sz[0] * 8); |
| } |
| |
| for (i = 0; i < loop; i++) { |
| temp = off8 + (i << shift_amount); |
| qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp); |
| temp = 0; |
| qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_HI, temp); |
| temp = word[i * scale] & 0xffffffff; |
| qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp); |
| temp = (word[i * scale] >> 32) & 0xffffffff; |
| qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp); |
| temp = word[i*scale + 1] & 0xffffffff; |
| qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_WRDATA_UPPER_LO, |
| temp); |
| temp = (word[i*scale + 1] >> 32) & 0xffffffff; |
| qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_WRDATA_UPPER_HI, |
| temp); |
| |
| temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; |
| qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); |
| temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; |
| qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| temp = qla4_8xxx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); |
| if ((temp & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| if (printk_ratelimit()) |
| ql4_printk(KERN_ERR, ha, |
| "failed to write through agent\n"); |
| ret = -1; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val) |
| { |
| u32 val = 0; |
| int retries = 60; |
| |
| if (!pegtune_val) { |
| do { |
| val = qla4_8xxx_rd_32(ha, CRB_CMDPEG_STATE); |
| if ((val == PHAN_INITIALIZE_COMPLETE) || |
| (val == PHAN_INITIALIZE_ACK)) |
| return 0; |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| schedule_timeout(500); |
| |
| } while (--retries); |
| |
| if (!retries) { |
| pegtune_val = qla4_8xxx_rd_32(ha, |
| QLA82XX_ROMUSB_GLB_PEGTUNE_DONE); |
| printk(KERN_WARNING "%s: init failed, " |
| "pegtune_val = %x\n", __func__, pegtune_val); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| static int qla4_8xxx_rcvpeg_ready(struct scsi_qla_host *ha) |
| { |
| uint32_t state = 0; |
| int loops = 0; |
| |
| /* Window 1 call */ |
| read_lock(&ha->hw_lock); |
| state = qla4_8xxx_rd_32(ha, CRB_RCVPEG_STATE); |
| read_unlock(&ha->hw_lock); |
| |
| while ((state != PHAN_PEG_RCV_INITIALIZED) && (loops < 30000)) { |
| udelay(100); |
| /* Window 1 call */ |
| read_lock(&ha->hw_lock); |
| state = qla4_8xxx_rd_32(ha, CRB_RCVPEG_STATE); |
| read_unlock(&ha->hw_lock); |
| |
| loops++; |
| } |
| |
| if (loops >= 30000) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Receive Peg initialization not complete: 0x%x.\n", state)); |
| return QLA_ERROR; |
| } |
| |
| return QLA_SUCCESS; |
| } |
| |
| void |
| qla4_8xxx_set_drv_active(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_active; |
| |
| drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| drv_active |= (1 << (ha->func_num * 4)); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); |
| } |
| |
| void |
| qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_active; |
| |
| drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| drv_active &= ~(1 << (ha->func_num * 4)); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); |
| } |
| |
| static inline int |
| qla4_8xxx_need_reset(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_state, drv_active; |
| int rval; |
| |
| drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| rval = drv_state & (1 << (ha->func_num * 4)); |
| if ((test_bit(AF_EEH_BUSY, &ha->flags)) && drv_active) |
| rval = 1; |
| |
| return rval; |
| } |
| |
| static inline void |
| qla4_8xxx_set_rst_ready(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_state; |
| |
| drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_state |= (1 << (ha->func_num * 4)); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); |
| } |
| |
| static inline void |
| qla4_8xxx_clear_rst_ready(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_state; |
| |
| drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_state &= ~(1 << (ha->func_num * 4)); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); |
| } |
| |
| static inline void |
| qla4_8xxx_set_qsnt_ready(struct scsi_qla_host *ha) |
| { |
| uint32_t qsnt_state; |
| |
| qsnt_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| qsnt_state |= (2 << (ha->func_num * 4)); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, qsnt_state); |
| } |
| |
| |
| static int |
| qla4_8xxx_start_firmware(struct scsi_qla_host *ha, uint32_t image_start) |
| { |
| int pcie_cap; |
| uint16_t lnk; |
| |
| /* scrub dma mask expansion register */ |
| qla4_8xxx_wr_32(ha, CRB_DMA_SHIFT, 0x55555555); |
| |
| /* Overwrite stale initialization register values */ |
| qla4_8xxx_wr_32(ha, CRB_CMDPEG_STATE, 0); |
| qla4_8xxx_wr_32(ha, CRB_RCVPEG_STATE, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_PEG_HALT_STATUS1, 0); |
| qla4_8xxx_wr_32(ha, QLA82XX_PEG_HALT_STATUS2, 0); |
| |
| if (qla4_8xxx_load_fw(ha, image_start) != QLA_SUCCESS) { |
| printk("%s: Error trying to start fw!\n", __func__); |
| return QLA_ERROR; |
| } |
| |
| /* Handshake with the card before we register the devices. */ |
| if (qla4_8xxx_cmdpeg_ready(ha, 0) != QLA_SUCCESS) { |
| printk("%s: Error during card handshake!\n", __func__); |
| return QLA_ERROR; |
| } |
| |
| /* Negotiated Link width */ |
| pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); |
| pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk); |
| ha->link_width = (lnk >> 4) & 0x3f; |
| |
| /* Synchronize with Receive peg */ |
| return qla4_8xxx_rcvpeg_ready(ha); |
| } |
| |
| static int |
| qla4_8xxx_try_start_fw(struct scsi_qla_host *ha) |
| { |
| int rval = QLA_ERROR; |
| |
| /* |
| * FW Load priority: |
| * 1) Operational firmware residing in flash. |
| * 2) Fail |
| */ |
| |
| ql4_printk(KERN_INFO, ha, |
| "FW: Retrieving flash offsets from FLT/FDT ...\n"); |
| rval = qla4_8xxx_get_flash_info(ha); |
| if (rval != QLA_SUCCESS) |
| return rval; |
| |
| ql4_printk(KERN_INFO, ha, |
| "FW: Attempting to load firmware from flash...\n"); |
| rval = qla4_8xxx_start_firmware(ha, ha->hw.flt_region_fw); |
| |
| if (rval != QLA_SUCCESS) { |
| ql4_printk(KERN_ERR, ha, "FW: Load firmware from flash" |
| " FAILED...\n"); |
| return rval; |
| } |
| |
| return rval; |
| } |
| |
| static void qla4_8xxx_rom_lock_recovery(struct scsi_qla_host *ha) |
| { |
| if (qla4_8xxx_rom_lock(ha)) { |
| /* Someone else is holding the lock. */ |
| dev_info(&ha->pdev->dev, "Resetting rom_lock\n"); |
| } |
| |
| /* |
| * Either we got the lock, or someone |
| * else died while holding it. |
| * In either case, unlock. |
| */ |
| qla4_8xxx_rom_unlock(ha); |
| } |
| |
| /** |
| * qla4_8xxx_device_bootstrap - Initialize device, set DEV_READY, start fw |
| * @ha: pointer to adapter structure |
| * |
| * Note: IDC lock must be held upon entry |
| **/ |
| static int |
| qla4_8xxx_device_bootstrap(struct scsi_qla_host *ha) |
| { |
| int rval = QLA_ERROR; |
| int i, timeout; |
| uint32_t old_count, count; |
| int need_reset = 0, peg_stuck = 1; |
| |
| need_reset = qla4_8xxx_need_reset(ha); |
| |
| old_count = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); |
| |
| for (i = 0; i < 10; i++) { |
| timeout = msleep_interruptible(200); |
| if (timeout) { |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA82XX_DEV_FAILED); |
| return rval; |
| } |
| |
| count = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); |
| if (count != old_count) |
| peg_stuck = 0; |
| } |
| |
| if (need_reset) { |
| /* We are trying to perform a recovery here. */ |
| if (peg_stuck) |
| qla4_8xxx_rom_lock_recovery(ha); |
| goto dev_initialize; |
| } else { |
| /* Start of day for this ha context. */ |
| if (peg_stuck) { |
| /* Either we are the first or recovery in progress. */ |
| qla4_8xxx_rom_lock_recovery(ha); |
| goto dev_initialize; |
| } else { |
| /* Firmware already running. */ |
| rval = QLA_SUCCESS; |
| goto dev_ready; |
| } |
| } |
| |
| dev_initialize: |
| /* set to DEV_INITIALIZING */ |
| ql4_printk(KERN_INFO, ha, "HW State: INITIALIZING\n"); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_INITIALIZING); |
| |
| /* Driver that sets device state to initializating sets IDC version */ |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, QLA82XX_IDC_VERSION); |
| |
| qla4_8xxx_idc_unlock(ha); |
| rval = qla4_8xxx_try_start_fw(ha); |
| qla4_8xxx_idc_lock(ha); |
| |
| if (rval != QLA_SUCCESS) { |
| ql4_printk(KERN_INFO, ha, "HW State: FAILED\n"); |
| qla4_8xxx_clear_drv_active(ha); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_FAILED); |
| return rval; |
| } |
| |
| dev_ready: |
| ql4_printk(KERN_INFO, ha, "HW State: READY\n"); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_READY); |
| |
| return rval; |
| } |
| |
| /** |
| * qla4_8xxx_need_reset_handler - Code to start reset sequence |
| * @ha: pointer to adapter structure |
| * |
| * Note: IDC lock must be held upon entry |
| **/ |
| static void |
| qla4_8xxx_need_reset_handler(struct scsi_qla_host *ha) |
| { |
| uint32_t dev_state, drv_state, drv_active; |
| unsigned long reset_timeout; |
| |
| ql4_printk(KERN_INFO, ha, |
| "Performing ISP error recovery\n"); |
| |
| if (test_and_clear_bit(AF_ONLINE, &ha->flags)) { |
| qla4_8xxx_idc_unlock(ha); |
| ha->isp_ops->disable_intrs(ha); |
| qla4_8xxx_idc_lock(ha); |
| } |
| |
| qla4_8xxx_set_rst_ready(ha); |
| |
| /* wait for 10 seconds for reset ack from all functions */ |
| reset_timeout = jiffies + (ha->nx_reset_timeout * HZ); |
| |
| drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| |
| ql4_printk(KERN_INFO, ha, |
| "%s(%ld): drv_state = 0x%x, drv_active = 0x%x\n", |
| __func__, ha->host_no, drv_state, drv_active); |
| |
| while (drv_state != drv_active) { |
| if (time_after_eq(jiffies, reset_timeout)) { |
| printk("%s: RESET TIMEOUT!\n", DRIVER_NAME); |
| break; |
| } |
| |
| qla4_8xxx_idc_unlock(ha); |
| msleep(1000); |
| qla4_8xxx_idc_lock(ha); |
| |
| drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| } |
| |
| dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| ql4_printk(KERN_INFO, ha, "3:Device state is 0x%x = %s\n", dev_state, |
| dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); |
| |
| /* Force to DEV_COLD unless someone else is starting a reset */ |
| if (dev_state != QLA82XX_DEV_INITIALIZING) { |
| ql4_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n"); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_COLD); |
| } |
| } |
| |
| /** |
| * qla4_8xxx_need_qsnt_handler - Code to start qsnt |
| * @ha: pointer to adapter structure |
| **/ |
| void |
| qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha) |
| { |
| qla4_8xxx_idc_lock(ha); |
| qla4_8xxx_set_qsnt_ready(ha); |
| qla4_8xxx_idc_unlock(ha); |
| } |
| |
| /** |
| * qla4_8xxx_device_state_handler - Adapter state machine |
| * @ha: pointer to host adapter structure. |
| * |
| * Note: IDC lock must be UNLOCKED upon entry |
| **/ |
| int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha) |
| { |
| uint32_t dev_state; |
| int rval = QLA_SUCCESS; |
| unsigned long dev_init_timeout; |
| |
| if (!test_bit(AF_INIT_DONE, &ha->flags)) { |
| qla4_8xxx_idc_lock(ha); |
| qla4_8xxx_set_drv_active(ha); |
| qla4_8xxx_idc_unlock(ha); |
| } |
| |
| dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| ql4_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state, |
| dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); |
| |
| /* wait for 30 seconds for device to go ready */ |
| dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ); |
| |
| qla4_8xxx_idc_lock(ha); |
| while (1) { |
| |
| if (time_after_eq(jiffies, dev_init_timeout)) { |
| ql4_printk(KERN_WARNING, ha, "Device init failed!\n"); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA82XX_DEV_FAILED); |
| } |
| |
| dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| ql4_printk(KERN_INFO, ha, |
| "2:Device state is 0x%x = %s\n", dev_state, |
| dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); |
| |
| /* NOTE: Make sure idc unlocked upon exit of switch statement */ |
| switch (dev_state) { |
| case QLA82XX_DEV_READY: |
| goto exit; |
| case QLA82XX_DEV_COLD: |
| rval = qla4_8xxx_device_bootstrap(ha); |
| goto exit; |
| case QLA82XX_DEV_INITIALIZING: |
| qla4_8xxx_idc_unlock(ha); |
| msleep(1000); |
| qla4_8xxx_idc_lock(ha); |
| break; |
| case QLA82XX_DEV_NEED_RESET: |
| if (!ql4xdontresethba) { |
| qla4_8xxx_need_reset_handler(ha); |
| /* Update timeout value after need |
| * reset handler */ |
| dev_init_timeout = jiffies + |
| (ha->nx_dev_init_timeout * HZ); |
| } else { |
| qla4_8xxx_idc_unlock(ha); |
| msleep(1000); |
| qla4_8xxx_idc_lock(ha); |
| } |
| break; |
| case QLA82XX_DEV_NEED_QUIESCENT: |
| /* idc locked/unlocked in handler */ |
| qla4_8xxx_need_qsnt_handler(ha); |
| break; |
| case QLA82XX_DEV_QUIESCENT: |
| qla4_8xxx_idc_unlock(ha); |
| msleep(1000); |
| qla4_8xxx_idc_lock(ha); |
| break; |
| case QLA82XX_DEV_FAILED: |
| qla4_8xxx_idc_unlock(ha); |
| qla4xxx_dead_adapter_cleanup(ha); |
| rval = QLA_ERROR; |
| qla4_8xxx_idc_lock(ha); |
| goto exit; |
| default: |
| qla4_8xxx_idc_unlock(ha); |
| qla4xxx_dead_adapter_cleanup(ha); |
| rval = QLA_ERROR; |
| qla4_8xxx_idc_lock(ha); |
| goto exit; |
| } |
| } |
| exit: |
| qla4_8xxx_idc_unlock(ha); |
| return rval; |
| } |
| |
| int qla4_8xxx_load_risc(struct scsi_qla_host *ha) |
| { |
| int retval; |
| |
| /* clear the interrupt */ |
| writel(0, &ha->qla4_8xxx_reg->host_int); |
| readl(&ha->qla4_8xxx_reg->host_int); |
| |
| retval = qla4_8xxx_device_state_handler(ha); |
| |
| if (retval == QLA_SUCCESS && !test_bit(AF_INIT_DONE, &ha->flags)) |
| retval = qla4xxx_request_irqs(ha); |
| |
| return retval; |
| } |
| |
| /*****************************************************************************/ |
| /* Flash Manipulation Routines */ |
| /*****************************************************************************/ |
| |
| #define OPTROM_BURST_SIZE 0x1000 |
| #define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) |
| |
| #define FARX_DATA_FLAG BIT_31 |
| #define FARX_ACCESS_FLASH_CONF 0x7FFD0000 |
| #define FARX_ACCESS_FLASH_DATA 0x7FF00000 |
| |
| static inline uint32_t |
| flash_conf_addr(struct ql82xx_hw_data *hw, uint32_t faddr) |
| { |
| return hw->flash_conf_off | faddr; |
| } |
| |
| static inline uint32_t |
| flash_data_addr(struct ql82xx_hw_data *hw, uint32_t faddr) |
| { |
| return hw->flash_data_off | faddr; |
| } |
| |
| static uint32_t * |
| qla4_8xxx_read_flash_data(struct scsi_qla_host *ha, uint32_t *dwptr, |
| uint32_t faddr, uint32_t length) |
| { |
| uint32_t i; |
| uint32_t val; |
| int loops = 0; |
| while ((qla4_8xxx_rom_lock(ha) != 0) && (loops < 50000)) { |
| udelay(100); |
| cond_resched(); |
| loops++; |
| } |
| if (loops >= 50000) { |
| ql4_printk(KERN_WARNING, ha, "ROM lock failed\n"); |
| return dwptr; |
| } |
| |
| /* Dword reads to flash. */ |
| for (i = 0; i < length/4; i++, faddr += 4) { |
| if (qla4_8xxx_do_rom_fast_read(ha, faddr, &val)) { |
| ql4_printk(KERN_WARNING, ha, |
| "Do ROM fast read failed\n"); |
| goto done_read; |
| } |
| dwptr[i] = __constant_cpu_to_le32(val); |
| } |
| |
| done_read: |
| qla4_8xxx_rom_unlock(ha); |
| return dwptr; |
| } |
| |
| /** |
| * Address and length are byte address |
| **/ |
| static uint8_t * |
| qla4_8xxx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, |
| uint32_t offset, uint32_t length) |
| { |
| qla4_8xxx_read_flash_data(ha, (uint32_t *)buf, offset, length); |
| return buf; |
| } |
| |
| static int |
| qla4_8xxx_find_flt_start(struct scsi_qla_host *ha, uint32_t *start) |
| { |
| const char *loc, *locations[] = { "DEF", "PCI" }; |
| |
| /* |
| * FLT-location structure resides after the last PCI region. |
| */ |
| |
| /* Begin with sane defaults. */ |
| loc = locations[0]; |
| *start = FA_FLASH_LAYOUT_ADDR_82; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "FLTL[%s] = 0x%x.\n", loc, *start)); |
| return QLA_SUCCESS; |
| } |
| |
| static void |
| qla4_8xxx_get_flt_info(struct scsi_qla_host *ha, uint32_t flt_addr) |
| { |
| const char *loc, *locations[] = { "DEF", "FLT" }; |
| uint16_t *wptr; |
| uint16_t cnt, chksum; |
| uint32_t start; |
| struct qla_flt_header *flt; |
| struct qla_flt_region *region; |
| struct ql82xx_hw_data *hw = &ha->hw; |
| |
| hw->flt_region_flt = flt_addr; |
| wptr = (uint16_t *)ha->request_ring; |
| flt = (struct qla_flt_header *)ha->request_ring; |
| region = (struct qla_flt_region *)&flt[1]; |
| qla4_8xxx_read_optrom_data(ha, (uint8_t *)ha->request_ring, |
| flt_addr << 2, OPTROM_BURST_SIZE); |
| if (*wptr == __constant_cpu_to_le16(0xffff)) |
| goto no_flash_data; |
| if (flt->version != __constant_cpu_to_le16(1)) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "Unsupported FLT detected: " |
| "version=0x%x length=0x%x checksum=0x%x.\n", |
| le16_to_cpu(flt->version), le16_to_cpu(flt->length), |
| le16_to_cpu(flt->checksum))); |
| goto no_flash_data; |
| } |
| |
| cnt = (sizeof(struct qla_flt_header) + le16_to_cpu(flt->length)) >> 1; |
| for (chksum = 0; cnt; cnt--) |
| chksum += le16_to_cpu(*wptr++); |
| if (chksum) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FLT detected: " |
| "version=0x%x length=0x%x checksum=0x%x.\n", |
| le16_to_cpu(flt->version), le16_to_cpu(flt->length), |
| chksum)); |
| goto no_flash_data; |
| } |
| |
| loc = locations[1]; |
| cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region); |
| for ( ; cnt; cnt--, region++) { |
| /* Store addresses as DWORD offsets. */ |
| start = le32_to_cpu(region->start) >> 2; |
| |
| DEBUG3(ql4_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x " |
| "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start, |
| le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size))); |
| |
| switch (le32_to_cpu(region->code) & 0xff) { |
| case FLT_REG_FDT: |
| hw->flt_region_fdt = start; |
| break; |
| case FLT_REG_BOOT_CODE_82: |
| hw->flt_region_boot = start; |
| break; |
| case FLT_REG_FW_82: |
| case FLT_REG_FW_82_1: |
| hw->flt_region_fw = start; |
| break; |
| case FLT_REG_BOOTLOAD_82: |
| hw->flt_region_bootload = start; |
| break; |
| case FLT_REG_ISCSI_PARAM: |
| hw->flt_iscsi_param = start; |
| break; |
| case FLT_REG_ISCSI_CHAP: |
| hw->flt_region_chap = start; |
| hw->flt_chap_size = le32_to_cpu(region->size); |
| break; |
| } |
| } |
| goto done; |
| |
| no_flash_data: |
| /* Use hardcoded defaults. */ |
| loc = locations[0]; |
| |
| hw->flt_region_fdt = FA_FLASH_DESCR_ADDR_82; |
| hw->flt_region_boot = FA_BOOT_CODE_ADDR_82; |
| hw->flt_region_bootload = FA_BOOT_LOAD_ADDR_82; |
| hw->flt_region_fw = FA_RISC_CODE_ADDR_82; |
| hw->flt_region_chap = FA_FLASH_ISCSI_CHAP; |
| hw->flt_chap_size = FA_FLASH_CHAP_SIZE; |
| |
| done: |
| DEBUG2(ql4_printk(KERN_INFO, ha, "FLT[%s]: flt=0x%x fdt=0x%x " |
| "boot=0x%x bootload=0x%x fw=0x%x\n", loc, hw->flt_region_flt, |
| hw->flt_region_fdt, hw->flt_region_boot, hw->flt_region_bootload, |
| hw->flt_region_fw)); |
| } |
| |
| static void |
| qla4_8xxx_get_fdt_info(struct scsi_qla_host *ha) |
| { |
| #define FLASH_BLK_SIZE_4K 0x1000 |
| #define FLASH_BLK_SIZE_32K 0x8000 |
| #define FLASH_BLK_SIZE_64K 0x10000 |
| const char *loc, *locations[] = { "MID", "FDT" }; |
| uint16_t cnt, chksum; |
| uint16_t *wptr; |
| struct qla_fdt_layout *fdt; |
| uint16_t mid = 0; |
| uint16_t fid = 0; |
| struct ql82xx_hw_data *hw = &ha->hw; |
| |
| hw->flash_conf_off = FARX_ACCESS_FLASH_CONF; |
| hw->flash_data_off = FARX_ACCESS_FLASH_DATA; |
| |
| wptr = (uint16_t *)ha->request_ring; |
| fdt = (struct qla_fdt_layout *)ha->request_ring; |
| qla4_8xxx_read_optrom_data(ha, (uint8_t *)ha->request_ring, |
| hw->flt_region_fdt << 2, OPTROM_BURST_SIZE); |
| |
| if (*wptr == __constant_cpu_to_le16(0xffff)) |
| goto no_flash_data; |
| |
| if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' || |
| fdt->sig[3] != 'D') |
| goto no_flash_data; |
| |
| for (cnt = 0, chksum = 0; cnt < sizeof(struct qla_fdt_layout) >> 1; |
| cnt++) |
| chksum += le16_to_cpu(*wptr++); |
| |
| if (chksum) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FDT detected: " |
| "checksum=0x%x id=%c version=0x%x.\n", chksum, fdt->sig[0], |
| le16_to_cpu(fdt->version))); |
| goto no_flash_data; |
| } |
| |
| loc = locations[1]; |
| mid = le16_to_cpu(fdt->man_id); |
| fid = le16_to_cpu(fdt->id); |
| hw->fdt_wrt_disable = fdt->wrt_disable_bits; |
| hw->fdt_erase_cmd = flash_conf_addr(hw, 0x0300 | fdt->erase_cmd); |
| hw->fdt_block_size = le32_to_cpu(fdt->block_size); |
| |
| if (fdt->unprotect_sec_cmd) { |
| hw->fdt_unprotect_sec_cmd = flash_conf_addr(hw, 0x0300 | |
| fdt->unprotect_sec_cmd); |
| hw->fdt_protect_sec_cmd = fdt->protect_sec_cmd ? |
| flash_conf_addr(hw, 0x0300 | fdt->protect_sec_cmd) : |
| flash_conf_addr(hw, 0x0336); |
| } |
| goto done; |
| |
| no_flash_data: |
| loc = locations[0]; |
| hw->fdt_block_size = FLASH_BLK_SIZE_64K; |
| done: |
| DEBUG2(ql4_printk(KERN_INFO, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " |
| "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, |
| hw->fdt_erase_cmd, hw->fdt_protect_sec_cmd, |
| hw->fdt_unprotect_sec_cmd, hw->fdt_wrt_disable, |
| hw->fdt_block_size)); |
| } |
| |
| static void |
| qla4_8xxx_get_idc_param(struct scsi_qla_host *ha) |
| { |
| #define QLA82XX_IDC_PARAM_ADDR 0x003e885c |
| uint32_t *wptr; |
| |
| if (!is_qla8022(ha)) |
| return; |
| wptr = (uint32_t *)ha->request_ring; |
| qla4_8xxx_read_optrom_data(ha, (uint8_t *)ha->request_ring, |
| QLA82XX_IDC_PARAM_ADDR , 8); |
| |
| if (*wptr == __constant_cpu_to_le32(0xffffffff)) { |
| ha->nx_dev_init_timeout = ROM_DEV_INIT_TIMEOUT; |
| ha->nx_reset_timeout = ROM_DRV_RESET_ACK_TIMEOUT; |
| } else { |
| ha->nx_dev_init_timeout = le32_to_cpu(*wptr++); |
| ha->nx_reset_timeout = le32_to_cpu(*wptr); |
| } |
| |
| DEBUG2(ql4_printk(KERN_DEBUG, ha, |
| "ha->nx_dev_init_timeout = %d\n", ha->nx_dev_init_timeout)); |
| DEBUG2(ql4_printk(KERN_DEBUG, ha, |
| "ha->nx_reset_timeout = %d\n", ha->nx_reset_timeout)); |
| return; |
| } |
| |
| int |
| qla4_8xxx_get_flash_info(struct scsi_qla_host *ha) |
| { |
| int ret; |
| uint32_t flt_addr; |
| |
| ret = qla4_8xxx_find_flt_start(ha, &flt_addr); |
| if (ret != QLA_SUCCESS) |
| return ret; |
| |
| qla4_8xxx_get_flt_info(ha, flt_addr); |
| qla4_8xxx_get_fdt_info(ha); |
| qla4_8xxx_get_idc_param(ha); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4_8xxx_stop_firmware - stops firmware on specified adapter instance |
| * @ha: pointer to host adapter structure. |
| * |
| * Remarks: |
| * For iSCSI, throws away all I/O and AENs into bit bucket, so they will |
| * not be available after successful return. Driver must cleanup potential |
| * outstanding I/O's after calling this funcion. |
| **/ |
| int |
| qla4_8xxx_stop_firmware(struct scsi_qla_host *ha) |
| { |
| int status; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_STOP_FW; |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, |
| &mbox_cmd[0], &mbox_sts[0]); |
| |
| DEBUG2(printk("scsi%ld: %s: status = %d\n", ha->host_no, |
| __func__, status)); |
| return status; |
| } |
| |
| /** |
| * qla4_8xxx_isp_reset - Resets ISP and aborts all outstanding commands. |
| * @ha: pointer to host adapter structure. |
| **/ |
| int |
| qla4_8xxx_isp_reset(struct scsi_qla_host *ha) |
| { |
| int rval; |
| uint32_t dev_state; |
| |
| qla4_8xxx_idc_lock(ha); |
| dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| |
| if (dev_state == QLA82XX_DEV_READY) { |
| ql4_printk(KERN_INFO, ha, "HW State: NEED RESET\n"); |
| qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA82XX_DEV_NEED_RESET); |
| } else |
| ql4_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n"); |
| |
| qla4_8xxx_idc_unlock(ha); |
| |
| rval = qla4_8xxx_device_state_handler(ha); |
| |
| qla4_8xxx_idc_lock(ha); |
| qla4_8xxx_clear_rst_ready(ha); |
| qla4_8xxx_idc_unlock(ha); |
| |
| if (rval == QLA_SUCCESS) |
| clear_bit(AF_FW_RECOVERY, &ha->flags); |
| |
| return rval; |
| } |
| |
| /** |
| * qla4_8xxx_get_sys_info - get adapter MAC address(es) and serial number |
| * @ha: pointer to host adapter structure. |
| * |
| **/ |
| int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| struct mbx_sys_info *sys_info; |
| dma_addr_t sys_info_dma; |
| int status = QLA_ERROR; |
| |
| sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info), |
| &sys_info_dma, GFP_KERNEL); |
| if (sys_info == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", |
| ha->host_no, __func__)); |
| return status; |
| } |
| |
| memset(sys_info, 0, sizeof(*sys_info)); |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_SYS_INFO; |
| mbox_cmd[1] = LSDW(sys_info_dma); |
| mbox_cmd[2] = MSDW(sys_info_dma); |
| mbox_cmd[4] = sizeof(*sys_info); |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 6, &mbox_cmd[0], |
| &mbox_sts[0]) != QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO failed\n", |
| ha->host_no, __func__)); |
| goto exit_validate_mac82; |
| } |
| |
| /* Make sure we receive the minimum required data to cache internally */ |
| if (mbox_sts[4] < offsetof(struct mbx_sys_info, reserved)) { |
| DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive" |
| " error (%x)\n", ha->host_no, __func__, mbox_sts[4])); |
| goto exit_validate_mac82; |
| |
| } |
| |
| /* Save M.A.C. address & serial_number */ |
| ha->port_num = sys_info->port_num; |
| memcpy(ha->my_mac, &sys_info->mac_addr[0], |
| min(sizeof(ha->my_mac), sizeof(sys_info->mac_addr))); |
| memcpy(ha->serial_number, &sys_info->serial_number, |
| min(sizeof(ha->serial_number), sizeof(sys_info->serial_number))); |
| memcpy(ha->model_name, &sys_info->board_id_str, |
| min(sizeof(ha->model_name), sizeof(sys_info->board_id_str))); |
| ha->phy_port_cnt = sys_info->phys_port_cnt; |
| ha->phy_port_num = sys_info->port_num; |
| ha->iscsi_pci_func_cnt = sys_info->iscsi_pci_func_cnt; |
| |
| DEBUG2(printk("scsi%ld: %s: " |
| "mac %02x:%02x:%02x:%02x:%02x:%02x " |
| "serial %s\n", ha->host_no, __func__, |
| ha->my_mac[0], ha->my_mac[1], ha->my_mac[2], |
| ha->my_mac[3], ha->my_mac[4], ha->my_mac[5], |
| ha->serial_number)); |
| |
| status = QLA_SUCCESS; |
| |
| exit_validate_mac82: |
| dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info, |
| sys_info_dma); |
| return status; |
| } |
| |
| /* Interrupt handling helpers. */ |
| |
| static int |
| qla4_8xxx_mbx_intr_enable(struct scsi_qla_host *ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__)); |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| mbox_cmd[0] = MBOX_CMD_ENABLE_INTRS; |
| mbox_cmd[1] = INTR_ENABLE; |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], |
| &mbox_sts[0]) != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: MBOX_CMD_ENABLE_INTRS failed (0x%04x)\n", |
| __func__, mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| return QLA_SUCCESS; |
| } |
| |
| static int |
| qla4_8xxx_mbx_intr_disable(struct scsi_qla_host *ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__)); |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| mbox_cmd[0] = MBOX_CMD_ENABLE_INTRS; |
| mbox_cmd[1] = INTR_DISABLE; |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], |
| &mbox_sts[0]) != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: MBOX_CMD_ENABLE_INTRS failed (0x%04x)\n", |
| __func__, mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| |
| return QLA_SUCCESS; |
| } |
| |
| void |
| qla4_8xxx_enable_intrs(struct scsi_qla_host *ha) |
| { |
| qla4_8xxx_mbx_intr_enable(ha); |
| |
| spin_lock_irq(&ha->hardware_lock); |
| /* BIT 10 - reset */ |
| qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); |
| spin_unlock_irq(&ha->hardware_lock); |
| set_bit(AF_INTERRUPTS_ON, &ha->flags); |
| } |
| |
| void |
| qla4_8xxx_disable_intrs(struct scsi_qla_host *ha) |
| { |
| if (test_and_clear_bit(AF_INTERRUPTS_ON, &ha->flags)) |
| qla4_8xxx_mbx_intr_disable(ha); |
| |
| spin_lock_irq(&ha->hardware_lock); |
| /* BIT 10 - set */ |
| qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0x0400); |
| spin_unlock_irq(&ha->hardware_lock); |
| } |
| |
| struct ql4_init_msix_entry { |
| uint16_t entry; |
| uint16_t index; |
| const char *name; |
| irq_handler_t handler; |
| }; |
| |
| static struct ql4_init_msix_entry qla4_8xxx_msix_entries[QLA_MSIX_ENTRIES] = { |
| { QLA_MSIX_DEFAULT, QLA_MIDX_DEFAULT, |
| "qla4xxx (default)", |
| (irq_handler_t)qla4_8xxx_default_intr_handler }, |
| { QLA_MSIX_RSP_Q, QLA_MIDX_RSP_Q, |
| "qla4xxx (rsp_q)", (irq_handler_t)qla4_8xxx_msix_rsp_q }, |
| }; |
| |
| void |
| qla4_8xxx_disable_msix(struct scsi_qla_host *ha) |
| { |
| int i; |
| struct ql4_msix_entry *qentry; |
| |
| for (i = 0; i < QLA_MSIX_ENTRIES; i++) { |
| qentry = &ha->msix_entries[qla4_8xxx_msix_entries[i].index]; |
| if (qentry->have_irq) { |
| free_irq(qentry->msix_vector, ha); |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %s\n", |
| __func__, qla4_8xxx_msix_entries[i].name)); |
| } |
| } |
| pci_disable_msix(ha->pdev); |
| clear_bit(AF_MSIX_ENABLED, &ha->flags); |
| } |
| |
| int |
| qla4_8xxx_enable_msix(struct scsi_qla_host *ha) |
| { |
| int i, ret; |
| struct msix_entry entries[QLA_MSIX_ENTRIES]; |
| struct ql4_msix_entry *qentry; |
| |
| for (i = 0; i < QLA_MSIX_ENTRIES; i++) |
| entries[i].entry = qla4_8xxx_msix_entries[i].entry; |
| |
| ret = pci_enable_msix(ha->pdev, entries, ARRAY_SIZE(entries)); |
| if (ret) { |
| ql4_printk(KERN_WARNING, ha, |
| "MSI-X: Failed to enable support -- %d/%d\n", |
| QLA_MSIX_ENTRIES, ret); |
| goto msix_out; |
| } |
| set_bit(AF_MSIX_ENABLED, &ha->flags); |
| |
| for (i = 0; i < QLA_MSIX_ENTRIES; i++) { |
| qentry = &ha->msix_entries[qla4_8xxx_msix_entries[i].index]; |
| qentry->msix_vector = entries[i].vector; |
| qentry->msix_entry = entries[i].entry; |
| qentry->have_irq = 0; |
| ret = request_irq(qentry->msix_vector, |
| qla4_8xxx_msix_entries[i].handler, 0, |
| qla4_8xxx_msix_entries[i].name, ha); |
| if (ret) { |
| ql4_printk(KERN_WARNING, ha, |
| "MSI-X: Unable to register handler -- %x/%d.\n", |
| qla4_8xxx_msix_entries[i].index, ret); |
| qla4_8xxx_disable_msix(ha); |
| goto msix_out; |
| } |
| qentry->have_irq = 1; |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %s\n", |
| __func__, qla4_8xxx_msix_entries[i].name)); |
| } |
| msix_out: |
| return ret; |
| } |