usb: storage: fix multi-line comment style
No functional changes here, just making sure our
storage driver uses a consistent multi-line comment
style.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 39afd70..fba4005 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1,4 +1,5 @@
-/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
+/*
+ * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
*
* Current development and maintenance:
* (C) 2001-2002 Björn Stenberg (bjorn@haxx.se)
@@ -628,7 +629,8 @@
srb->cmd_len = sizeof(ataCdb->generic);
transferStatus = usb_stor_Bulk_transport(srb, us);
- /* if the command gets aborted by the higher layers, we need to
+ /*
+ * if the command gets aborted by the higher layers, we need to
* short-circuit all other processing
*/
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
@@ -695,15 +697,18 @@
}
}
- /* Regardless of auto-sense, if we _know_ we have an error
+ /*
+ * Regardless of auto-sense, if we _know_ we have an error
* condition, show that in the result code
*/
if (transferStatus == USB_STOR_TRANSPORT_FAILED)
srb->result = SAM_STAT_CHECK_CONDITION;
return;
- /* abort processing: the bulk-only transport requires a reset
- * following an abort */
+ /*
+ * abort processing: the bulk-only transport requires a reset
+ * following an abort
+ */
Handle_Abort:
srb->result = DID_ABORT << 16;
@@ -965,20 +970,22 @@
info->DeviceHead = master_slave;
break;
}
- /* check Cylinder High/Low to
- determine if it is an ATAPI device
- */
+ /*
+ * check Cylinder High/Low to
+ * determine if it is an ATAPI device
+ */
else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
regs[ATA_REG_LCYL_OFFSET] == 0x14) {
- /* It seems that the RICOH
- MP6200A CD/RW drive will
- report itself okay as a
- slave when it is really a
- master. So this check again
- as a master device just to
- make sure it doesn't report
- itself okay as a master also
- */
+ /*
+ * It seems that the RICOH
+ * MP6200A CD/RW drive will
+ * report itself okay as a
+ * slave when it is really a
+ * master. So this check again
+ * as a master device just to
+ * make sure it doesn't report
+ * itself okay as a master also
+ */
if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
!recheckAsMaster) {
usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n");
@@ -1176,9 +1183,11 @@
if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
usb_stor_dbg(us, " Device supports Media Status Notification\n");
- /* Indicate that it is enabled, even though it is not
- * This allows the lock/unlock of the media to work
- * correctly.
+ /*
+ * Indicate that it is enabled, even
+ * though it is not.
+ * This allows the lock/unlock of the
+ * media to work correctly.
*/
info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
}
@@ -1197,7 +1206,7 @@
usb_stor_dbg(us, "Protocol changed to: %s\n",
us->protocol_name);
- /* Free driver structure */
+ /* Free driver structure */
us->extra_destructor(info);
kfree(info);
us->extra = NULL;