ARM: dts: Enable support for DWC3 controller for exynos5420
Add device tree nodes for DWC3 controller present on
Exynos 5420 SoC, to enable support for USB 3.0.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 31d99b0a..677a4e6 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -758,6 +758,23 @@
samsung,power-domain = <&g2d_pd>;
};
+ usbdrd3_0: usb@12000000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
usbdrd_phy0: phy@12100000 {
compatible = "samsung,exynos5420-usbdrd-phy";
reg = <0x12100000 0x100>;
@@ -767,6 +784,23 @@
#phy-cells = <1>;
};
+ usbdrd3_1: usb@12400000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x12400000 0x10000>;
+ interrupts = <0 73 0>;
+ phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
usbdrd_phy1: phy@12500000 {
compatible = "samsung,exynos5420-usbdrd-phy";
reg = <0x12500000 0x100>;