[MAC80211]: Add mac80211 wireless stack.
Add mac80211, the IEEE 802.11 software MAC layer.
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c
new file mode 100644
index 0000000..68bddae
--- /dev/null
+++ b/net/mac80211/rc80211_simple.c
@@ -0,0 +1,361 @@
+/*
+ * Copyright 2002-2005, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/skbuff.h>
+#include <linux/compiler.h>
+
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+#include "ieee80211_rate.h"
+
+
+/* This is a minimal implementation of TX rate controlling that can be used
+ * as the default when no improved mechanisms are available. */
+
+
+#define RATE_CONTROL_EMERG_DEC 2
+#define RATE_CONTROL_INTERVAL (HZ / 20)
+#define RATE_CONTROL_MIN_TX 10
+
+MODULE_ALIAS("rc80211_default");
+
+static void rate_control_rate_inc(struct ieee80211_local *local,
+ struct sta_info *sta)
+{
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_hw_mode *mode;
+ int i = sta->txrate;
+ int maxrate;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+ if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
+ /* forced unicast rate - do not change STA rate */
+ return;
+ }
+
+ mode = local->oper_hw_mode;
+ maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
+
+ if (i > mode->num_rates)
+ i = mode->num_rates - 2;
+
+ while (i + 1 < mode->num_rates) {
+ i++;
+ if (sta->supp_rates & BIT(i) &&
+ mode->rates[i].flags & IEEE80211_RATE_SUPPORTED &&
+ (maxrate < 0 || i <= maxrate)) {
+ sta->txrate = i;
+ break;
+ }
+ }
+}
+
+
+static void rate_control_rate_dec(struct ieee80211_local *local,
+ struct sta_info *sta)
+{
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_hw_mode *mode;
+ int i = sta->txrate;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+ if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
+ /* forced unicast rate - do not change STA rate */
+ return;
+ }
+
+ mode = local->oper_hw_mode;
+ if (i > mode->num_rates)
+ i = mode->num_rates;
+
+ while (i > 0) {
+ i--;
+ if (sta->supp_rates & BIT(i) &&
+ mode->rates[i].flags & IEEE80211_RATE_SUPPORTED) {
+ sta->txrate = i;
+ break;
+ }
+ }
+}
+
+
+static struct ieee80211_rate *
+rate_control_lowest_rate(struct ieee80211_local *local,
+ struct ieee80211_hw_mode *mode)
+{
+ int i;
+
+ for (i = 0; i < mode->num_rates; i++) {
+ struct ieee80211_rate *rate = &mode->rates[i];
+
+ if (rate->flags & IEEE80211_RATE_SUPPORTED)
+ return rate;
+ }
+
+ printk(KERN_DEBUG "rate_control_lowest_rate - no supported rates "
+ "found\n");
+ return &mode->rates[0];
+}
+
+
+struct global_rate_control {
+ int dummy;
+};
+
+struct sta_rate_control {
+ unsigned long last_rate_change;
+ u32 tx_num_failures;
+ u32 tx_num_xmit;
+
+ unsigned long avg_rate_update;
+ u32 tx_avg_rate_sum;
+ u32 tx_avg_rate_num;
+};
+
+
+static void rate_control_simple_tx_status(void *priv, struct net_device *dev,
+ struct sk_buff *skb,
+ struct ieee80211_tx_status *status)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct sta_info *sta;
+ struct sta_rate_control *srctrl;
+
+ sta = sta_info_get(local, hdr->addr1);
+
+ if (!sta)
+ return;
+
+ srctrl = sta->rate_ctrl_priv;
+ srctrl->tx_num_xmit++;
+ if (status->excessive_retries) {
+ sta->antenna_sel_tx = sta->antenna_sel_tx == 1 ? 2 : 1;
+ sta->antenna_sel_rx = sta->antenna_sel_rx == 1 ? 2 : 1;
+ if (local->sta_antenna_sel == STA_ANTENNA_SEL_SW_CTRL_DEBUG) {
+ printk(KERN_DEBUG "%s: " MAC_FMT " TX antenna --> %d "
+ "RX antenna --> %d (@%lu)\n",
+ dev->name, MAC_ARG(hdr->addr1),
+ sta->antenna_sel_tx, sta->antenna_sel_rx, jiffies);
+ }
+ srctrl->tx_num_failures++;
+ sta->tx_retry_failed++;
+ sta->tx_num_consecutive_failures++;
+ sta->tx_num_mpdu_fail++;
+ } else {
+ sta->last_ack_rssi[0] = sta->last_ack_rssi[1];
+ sta->last_ack_rssi[1] = sta->last_ack_rssi[2];
+ sta->last_ack_rssi[2] = status->ack_signal;
+ sta->tx_num_consecutive_failures = 0;
+ sta->tx_num_mpdu_ok++;
+ }
+ sta->tx_retry_count += status->retry_count;
+ sta->tx_num_mpdu_fail += status->retry_count;
+
+ if (time_after(jiffies,
+ srctrl->last_rate_change + RATE_CONTROL_INTERVAL) &&
+ srctrl->tx_num_xmit > RATE_CONTROL_MIN_TX) {
+ u32 per_failed;
+ srctrl->last_rate_change = jiffies;
+
+ per_failed = (100 * sta->tx_num_mpdu_fail) /
+ (sta->tx_num_mpdu_fail + sta->tx_num_mpdu_ok);
+ /* TODO: calculate average per_failed to make adjusting
+ * parameters easier */
+#if 0
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "MPDU fail=%d ok=%d per_failed=%d\n",
+ sta->tx_num_mpdu_fail, sta->tx_num_mpdu_ok,
+ per_failed);
+ }
+#endif
+
+ if (per_failed > local->rate_ctrl_num_down) {
+ rate_control_rate_dec(local, sta);
+ } else if (per_failed < local->rate_ctrl_num_up) {
+ rate_control_rate_inc(local, sta);
+ }
+ srctrl->tx_avg_rate_sum += status->control.rate->rate;
+ srctrl->tx_avg_rate_num++;
+ srctrl->tx_num_failures = 0;
+ srctrl->tx_num_xmit = 0;
+ } else if (sta->tx_num_consecutive_failures >=
+ RATE_CONTROL_EMERG_DEC) {
+ rate_control_rate_dec(local, sta);
+ }
+
+ if (srctrl->avg_rate_update + 60 * HZ < jiffies) {
+ srctrl->avg_rate_update = jiffies;
+ if (srctrl->tx_avg_rate_num > 0) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: STA " MAC_FMT " Average rate: "
+ "%d (%d/%d)\n",
+ dev->name, MAC_ARG(sta->addr),
+ srctrl->tx_avg_rate_sum /
+ srctrl->tx_avg_rate_num,
+ srctrl->tx_avg_rate_sum,
+ srctrl->tx_avg_rate_num);
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+ srctrl->tx_avg_rate_sum = 0;
+ srctrl->tx_avg_rate_num = 0;
+ }
+ }
+
+ sta_info_put(sta);
+}
+
+
+static struct ieee80211_rate *
+rate_control_simple_get_rate(void *priv, struct net_device *dev,
+ struct sk_buff *skb,
+ struct rate_control_extra *extra)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hw_mode *mode = extra->mode;
+ struct sta_info *sta;
+ int rateidx, nonerp_idx;
+ u16 fc;
+
+ memset(extra, 0, sizeof(*extra));
+
+ fc = le16_to_cpu(hdr->frame_control);
+ if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
+ (hdr->addr1[0] & 0x01)) {
+ /* Send management frames and broadcast/multicast data using
+ * lowest rate. */
+ /* TODO: this could probably be improved.. */
+ return rate_control_lowest_rate(local, mode);
+ }
+
+ sta = sta_info_get(local, hdr->addr1);
+
+ if (!sta)
+ return rate_control_lowest_rate(local, mode);
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (sdata->bss && sdata->bss->force_unicast_rateidx > -1)
+ sta->txrate = sdata->bss->force_unicast_rateidx;
+
+ rateidx = sta->txrate;
+
+ if (rateidx >= mode->num_rates)
+ rateidx = mode->num_rates - 1;
+
+ sta->last_txrate = rateidx;
+ nonerp_idx = rateidx;
+ while (nonerp_idx > 0 &&
+ ((mode->rates[nonerp_idx].flags & IEEE80211_RATE_ERP) ||
+ !(mode->rates[nonerp_idx].flags & IEEE80211_RATE_SUPPORTED) ||
+ !(sta->supp_rates & BIT(nonerp_idx))))
+ nonerp_idx--;
+ extra->nonerp = &mode->rates[nonerp_idx];
+
+ sta_info_put(sta);
+
+ return &mode->rates[rateidx];
+}
+
+
+static void rate_control_simple_rate_init(void *priv, void *priv_sta,
+ struct ieee80211_local *local,
+ struct sta_info *sta)
+{
+ struct ieee80211_hw_mode *mode;
+ int i;
+ sta->txrate = 0;
+ mode = local->oper_hw_mode;
+ /* TODO: what is a good starting rate for STA? About middle? Maybe not
+ * the lowest or the highest rate.. Could consider using RSSI from
+ * previous packets? Need to have IEEE 802.1X auth succeed immediately
+ * after assoc.. */
+ for (i = 0; i < mode->num_rates; i++) {
+ if ((sta->supp_rates & BIT(i)) &&
+ (mode->rates[i].flags & IEEE80211_RATE_SUPPORTED))
+ sta->txrate = i;
+ }
+}
+
+
+static void * rate_control_simple_alloc(struct ieee80211_local *local)
+{
+ struct global_rate_control *rctrl;
+
+ rctrl = kzalloc(sizeof(*rctrl), GFP_ATOMIC);
+
+ return rctrl;
+}
+
+
+static void rate_control_simple_free(void *priv)
+{
+ struct global_rate_control *rctrl = priv;
+ kfree(rctrl);
+}
+
+
+static void rate_control_simple_clear(void *priv)
+{
+}
+
+
+static void * rate_control_simple_alloc_sta(void *priv, gfp_t gfp)
+{
+ struct sta_rate_control *rctrl;
+
+ rctrl = kzalloc(sizeof(*rctrl), gfp);
+
+ return rctrl;
+}
+
+
+static void rate_control_simple_free_sta(void *priv, void *priv_sta)
+{
+ struct sta_rate_control *rctrl = priv_sta;
+ kfree(rctrl);
+}
+
+
+static struct rate_control_ops rate_control_simple = {
+ .module = THIS_MODULE,
+ .name = "simple",
+ .tx_status = rate_control_simple_tx_status,
+ .get_rate = rate_control_simple_get_rate,
+ .rate_init = rate_control_simple_rate_init,
+ .clear = rate_control_simple_clear,
+ .alloc = rate_control_simple_alloc,
+ .free = rate_control_simple_free,
+ .alloc_sta = rate_control_simple_alloc_sta,
+ .free_sta = rate_control_simple_free_sta,
+};
+
+
+static int __init rate_control_simple_init(void)
+{
+ return ieee80211_rate_control_register(&rate_control_simple);
+}
+
+
+static void __exit rate_control_simple_exit(void)
+{
+ ieee80211_rate_control_unregister(&rate_control_simple);
+}
+
+
+module_init(rate_control_simple_init);
+module_exit(rate_control_simple_exit);
+
+MODULE_DESCRIPTION("Simple rate control algorithm for ieee80211");
+MODULE_LICENSE("GPL");