tg3: Migrate tg3_flags to phy_flags
This patch moves most of the phy related flag definitions over to the
phyflags member and changes the code accordingly.
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5d684d2..4937bd1 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2774,7 +2774,6 @@
#define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002
#define TG3_FLAG_RX_CHECKSUMS 0x00000004
#define TG3_FLAG_USE_LINKCHG_REG 0x00000008
-#define TG3_FLAG_USE_MI_INTERRUPT 0x00000010
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_ASPM_WORKAROUND 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
@@ -2796,7 +2795,6 @@
#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
#define TG3_FLAG_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
-#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_CPMU_PRESENT 0x04000000
#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
@@ -2807,22 +2805,15 @@
u32 tg3_flags2;
#define TG3_FLG2_RESTART_TIMER 0x00000001
#define TG3_FLG2_TSO_BUG 0x00000002
-#define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004
#define TG3_FLG2_IS_5788 0x00000008
#define TG3_FLG2_MAX_RXPEND_64 0x00000010
#define TG3_FLG2_TSO_CAPABLE 0x00000020
-#define TG3_FLG2_PHY_ADC_BUG 0x00000040
-#define TG3_FLG2_PHY_5704_A0_BUG 0x00000080
-#define TG3_FLG2_PHY_BER_BUG 0x00000100
#define TG3_FLG2_PCI_EXPRESS 0x00000200
#define TG3_FLG2_ASF_NEW_HANDSHAKE 0x00000400
#define TG3_FLG2_HW_AUTONEG 0x00000800
#define TG3_FLG2_IS_NIC 0x00001000
-#define TG3_FLG2_PHY_SERDES 0x00002000
-#define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000
#define TG3_FLG2_FLASH 0x00008000
#define TG3_FLG2_HW_TSO_1 0x00010000
-#define TG3_FLG2_SERDES_PREEMPHASIS 0x00020000
#define TG3_FLG2_5705_PLUS 0x00040000
#define TG3_FLG2_5750_PLUS 0x00080000
#define TG3_FLG2_HW_TSO_3 0x00100000
@@ -2830,10 +2821,6 @@
#define TG3_FLG2_USING_MSIX 0x00400000
#define TG3_FLG2_USING_MSI_OR_MSIX (TG3_FLG2_USING_MSI | \
TG3_FLG2_USING_MSIX)
-#define TG3_FLG2_MII_SERDES 0x00800000
-#define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \
- TG3_FLG2_MII_SERDES)
-#define TG3_FLG2_PARALLEL_DETECT 0x01000000
#define TG3_FLG2_ICH_WORKAROUND 0x02000000
#define TG3_FLG2_5780_CLASS 0x04000000
#define TG3_FLG2_HW_TSO_2 0x08000000
@@ -2841,9 +2828,7 @@
TG3_FLG2_HW_TSO_2 | \
TG3_FLG2_HW_TSO_3)
#define TG3_FLG2_1SHOT_MSI 0x10000000
-#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
-#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
u32 tg3_flags3;
#define TG3_FLG3_NO_NVRAM_ADDR_TRANS 0x00000001
#define TG3_FLG3_ENABLE_APE 0x00000002
@@ -2851,15 +2836,12 @@
#define TG3_FLG3_5701_DMA_BUG 0x00000008
#define TG3_FLG3_USE_PHYLIB 0x00000010
#define TG3_FLG3_MDIOBUS_INITED 0x00000020
-#define TG3_FLG3_PHY_CONNECTED 0x00000080
#define TG3_FLG3_RGMII_INBAND_DISABLE 0x00000100
#define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200
#define TG3_FLG3_RGMII_EXT_IBND_TX_EN 0x00000400
#define TG3_FLG3_CLKREQ_BUG 0x00000800
-#define TG3_FLG3_PHY_ENABLE_APD 0x00001000
#define TG3_FLG3_5755_PLUS 0x00002000
#define TG3_FLG3_NO_NVRAM 0x00004000
-#define TG3_FLG3_PHY_IS_FET 0x00010000
#define TG3_FLG3_ENABLE_RSS 0x00020000
#define TG3_FLG3_ENABLE_TSS 0x00040000
#define TG3_FLG3_4G_DMA_BNDRY_BUG 0x00080000
@@ -2966,6 +2948,24 @@
u32 phy_flags;
#define TG3_PHYFLG_IS_LOW_POWER 0x00000001
+#define TG3_PHYFLG_IS_CONNECTED 0x00000002
+#define TG3_PHYFLG_USE_MI_INTERRUPT 0x00000004
+#define TG3_PHYFLG_PHY_SERDES 0x00000010
+#define TG3_PHYFLG_MII_SERDES 0x00000020
+#define TG3_PHYFLG_ANY_SERDES (TG3_PHYFLG_PHY_SERDES | \
+ TG3_PHYFLG_MII_SERDES)
+#define TG3_PHYFLG_IS_FET 0x00000040
+#define TG3_PHYFLG_10_100_ONLY 0x00000080
+#define TG3_PHYFLG_ENABLE_APD 0x00000100
+#define TG3_PHYFLG_CAPACITIVE_COUPLING 0x00000200
+#define TG3_PHYFLG_NO_ETH_WIRE_SPEED 0x00000400
+#define TG3_PHYFLG_JITTER_BUG 0x00000800
+#define TG3_PHYFLG_ADJUST_TRIM 0x00001000
+#define TG3_PHYFLG_ADC_BUG 0x00002000
+#define TG3_PHYFLG_5704_A0_BUG 0x00004000
+#define TG3_PHYFLG_BER_BUG 0x00008000
+#define TG3_PHYFLG_SERDES_PREEMPHASIS 0x00010000
+#define TG3_PHYFLG_PARALLEL_DETECT 0x00020000
u32 led_ctrl;
u32 phy_otp;