| /* |
| * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver |
| * |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/clk.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/of_device.h> |
| #include <sound/core.h> |
| #include <sound/tlv.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| |
| #include "sgtl5000.h" |
| |
| #define SGTL5000_DAP_REG_OFFSET 0x0100 |
| #define SGTL5000_MAX_REG_OFFSET 0x013A |
| |
| /* default value of sgtl5000 registers */ |
| static const struct reg_default sgtl5000_reg_defaults[] = { |
| { SGTL5000_CHIP_CLK_CTRL, 0x0008 }, |
| { SGTL5000_CHIP_I2S_CTRL, 0x0010 }, |
| { SGTL5000_CHIP_SSS_CTRL, 0x0010 }, |
| { SGTL5000_CHIP_DAC_VOL, 0x3c3c }, |
| { SGTL5000_CHIP_PAD_STRENGTH, 0x015f }, |
| { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 }, |
| { SGTL5000_CHIP_ANA_CTRL, 0x0111 }, |
| { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 }, |
| { SGTL5000_CHIP_ANA_POWER, 0x7060 }, |
| { SGTL5000_CHIP_PLL_CTRL, 0x5000 }, |
| { SGTL5000_DAP_BASS_ENHANCE, 0x0040 }, |
| { SGTL5000_DAP_BASS_ENHANCE_CTRL, 0x051f }, |
| { SGTL5000_DAP_SURROUND, 0x0040 }, |
| { SGTL5000_DAP_EQ_BASS_BAND0, 0x002f }, |
| { SGTL5000_DAP_EQ_BASS_BAND1, 0x002f }, |
| { SGTL5000_DAP_EQ_BASS_BAND2, 0x002f }, |
| { SGTL5000_DAP_EQ_BASS_BAND3, 0x002f }, |
| { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f }, |
| { SGTL5000_DAP_MAIN_CHAN, 0x8000 }, |
| { SGTL5000_DAP_AVC_CTRL, 0x0510 }, |
| { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 }, |
| { SGTL5000_DAP_AVC_ATTACK, 0x0028 }, |
| { SGTL5000_DAP_AVC_DECAY, 0x0050 }, |
| }; |
| |
| /* regulator supplies for sgtl5000, VDDD is an optional external supply */ |
| enum sgtl5000_regulator_supplies { |
| VDDA, |
| VDDIO, |
| VDDD, |
| SGTL5000_SUPPLY_NUM |
| }; |
| |
| /* vddd is optional supply */ |
| static const char *supply_names[SGTL5000_SUPPLY_NUM] = { |
| "VDDA", |
| "VDDIO", |
| "VDDD" |
| }; |
| |
| #define LDO_CONSUMER_NAME "VDDD_LDO" |
| #define LDO_VOLTAGE 1200000 |
| |
| static struct regulator_consumer_supply ldo_consumer[] = { |
| REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL), |
| }; |
| |
| static struct regulator_init_data ldo_init_data = { |
| .constraints = { |
| .min_uV = 1200000, |
| .max_uV = 1200000, |
| .valid_modes_mask = REGULATOR_MODE_NORMAL, |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = 1, |
| .consumer_supplies = &ldo_consumer[0], |
| }; |
| |
| /* |
| * sgtl5000 internal ldo regulator, |
| * enabled when VDDD not provided |
| */ |
| struct ldo_regulator { |
| struct regulator_desc desc; |
| struct regulator_dev *dev; |
| int voltage; |
| void *codec_data; |
| bool enabled; |
| }; |
| |
| /* sgtl5000 private structure in codec */ |
| struct sgtl5000_priv { |
| int sysclk; /* sysclk rate */ |
| int master; /* i2s master or not */ |
| int fmt; /* i2s data format */ |
| struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM]; |
| struct ldo_regulator *ldo; |
| struct regmap *regmap; |
| struct clk *mclk; |
| }; |
| |
| /* |
| * mic_bias power on/off share the same register bits with |
| * output impedance of mic bias, when power on mic bias, we |
| * need reclaim it to impedance value. |
| * 0x0 = Powered off |
| * 0x1 = 2Kohm |
| * 0x2 = 4Kohm |
| * 0x3 = 8Kohm |
| */ |
| static int mic_bias_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| /* change mic bias resistor to 4Kohm */ |
| snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, |
| SGTL5000_BIAS_R_MASK, |
| SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT); |
| break; |
| |
| case SND_SOC_DAPM_PRE_PMD: |
| snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, |
| SGTL5000_BIAS_R_MASK, 0); |
| break; |
| } |
| return 0; |
| } |
| |
| /* |
| * As manual described, ADC/DAC only works when VAG powerup, |
| * So enabled VAG before ADC/DAC up. |
| * In power down case, we need wait 400ms when vag fully ramped down. |
| */ |
| static int power_vag_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP; |
| |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); |
| break; |
| |
| case SND_SOC_DAPM_PRE_PMD: |
| /* |
| * Don't clear VAG_POWERUP, when both DAC and ADC are |
| * operational to prevent inadvertently starving the |
| * other one of them. |
| */ |
| if ((snd_soc_read(w->codec, SGTL5000_CHIP_ANA_POWER) & |
| mask) != mask) { |
| snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_VAG_POWERUP, 0); |
| msleep(400); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* input sources for ADC */ |
| static const char *adc_mux_text[] = { |
| "MIC_IN", "LINE_IN" |
| }; |
| |
| static const struct soc_enum adc_enum = |
| SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text); |
| |
| static const struct snd_kcontrol_new adc_mux = |
| SOC_DAPM_ENUM("Capture Mux", adc_enum); |
| |
| /* input sources for DAC */ |
| static const char *dac_mux_text[] = { |
| "DAC", "LINE_IN" |
| }; |
| |
| static const struct soc_enum dac_enum = |
| SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text); |
| |
| static const struct snd_kcontrol_new dac_mux = |
| SOC_DAPM_ENUM("Headphone Mux", dac_enum); |
| |
| static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { |
| SND_SOC_DAPM_INPUT("LINE_IN"), |
| SND_SOC_DAPM_INPUT("MIC_IN"), |
| |
| SND_SOC_DAPM_OUTPUT("HP_OUT"), |
| SND_SOC_DAPM_OUTPUT("LINE_OUT"), |
| |
| SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0, |
| mic_bias_event, |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), |
| |
| SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0), |
| |
| SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux), |
| SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux), |
| |
| /* aif for i2s input */ |
| SND_SOC_DAPM_AIF_IN("AIFIN", "Playback", |
| 0, SGTL5000_CHIP_DIG_POWER, |
| 0, 0), |
| |
| /* aif for i2s output */ |
| SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture", |
| 0, SGTL5000_CHIP_DIG_POWER, |
| 1, 0), |
| |
| SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0), |
| SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0), |
| |
| SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event), |
| SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event), |
| }; |
| |
| /* routes for sgtl5000 */ |
| static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = { |
| {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */ |
| {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */ |
| |
| {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ |
| {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */ |
| |
| {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */ |
| {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ |
| {"LO", NULL, "DAC"}, /* dac --> line_out */ |
| |
| {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ |
| {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */ |
| |
| {"LINE_OUT", NULL, "LO"}, |
| {"HP_OUT", NULL, "HP"}, |
| }; |
| |
| /* custom function to fetch info of PCM playback volume */ |
| static int dac_info_volsw(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 2; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 0xfc - 0x3c; |
| return 0; |
| } |
| |
| /* |
| * custom function to get of PCM playback volume |
| * |
| * dac volume register |
| * 15-------------8-7--------------0 |
| * | R channel vol | L channel vol | |
| * ------------------------------- |
| * |
| * PCM volume with 0.5017 dB steps from 0 to -90 dB |
| * |
| * register values map to dB |
| * 0x3B and less = Reserved |
| * 0x3C = 0 dB |
| * 0x3D = -0.5 dB |
| * 0xF0 = -90 dB |
| * 0xFC and greater = Muted |
| * |
| * register value map to userspace value |
| * |
| * register value 0x3c(0dB) 0xf0(-90dB)0xfc |
| * ------------------------------ |
| * userspace value 0xc0 0 |
| */ |
| static int dac_get_volsw(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| int reg; |
| int l; |
| int r; |
| |
| reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL); |
| |
| /* get left channel volume */ |
| l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT; |
| |
| /* get right channel volume */ |
| r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT; |
| |
| /* make sure value fall in (0x3c,0xfc) */ |
| l = clamp(l, 0x3c, 0xfc); |
| r = clamp(r, 0x3c, 0xfc); |
| |
| /* invert it and map to userspace value */ |
| l = 0xfc - l; |
| r = 0xfc - r; |
| |
| ucontrol->value.integer.value[0] = l; |
| ucontrol->value.integer.value[1] = r; |
| |
| return 0; |
| } |
| |
| /* |
| * custom function to put of PCM playback volume |
| * |
| * dac volume register |
| * 15-------------8-7--------------0 |
| * | R channel vol | L channel vol | |
| * ------------------------------- |
| * |
| * PCM volume with 0.5017 dB steps from 0 to -90 dB |
| * |
| * register values map to dB |
| * 0x3B and less = Reserved |
| * 0x3C = 0 dB |
| * 0x3D = -0.5 dB |
| * 0xF0 = -90 dB |
| * 0xFC and greater = Muted |
| * |
| * userspace value map to register value |
| * |
| * userspace value 0xc0 0 |
| * ------------------------------ |
| * register value 0x3c(0dB) 0xf0(-90dB)0xfc |
| */ |
| static int dac_put_volsw(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| int reg; |
| int l; |
| int r; |
| |
| l = ucontrol->value.integer.value[0]; |
| r = ucontrol->value.integer.value[1]; |
| |
| /* make sure userspace volume fall in (0, 0xfc-0x3c) */ |
| l = clamp(l, 0, 0xfc - 0x3c); |
| r = clamp(r, 0, 0xfc - 0x3c); |
| |
| /* invert it, get the value can be set to register */ |
| l = 0xfc - l; |
| r = 0xfc - r; |
| |
| /* shift to get the register value */ |
| reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT | |
| r << SGTL5000_DAC_VOL_RIGHT_SHIFT; |
| |
| snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg); |
| |
| return 0; |
| } |
| |
| static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); |
| |
| /* tlv for mic gain, 0db 20db 30db 40db */ |
| static const unsigned int mic_gain_tlv[] = { |
| TLV_DB_RANGE_HEAD(2), |
| 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), |
| 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0), |
| }; |
| |
| /* tlv for hp volume, -51.5db to 12.0db, step .5db */ |
| static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0); |
| |
| static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { |
| /* SOC_DOUBLE_S8_TLV with invert */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "PCM Playback Volume", |
| .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | |
| SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = dac_info_volsw, |
| .get = dac_get_volsw, |
| .put = dac_put_volsw, |
| }, |
| |
| SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0), |
| SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)", |
| SGTL5000_CHIP_ANA_ADC_CTRL, |
| 8, 2, 0, capture_6db_attenuate), |
| SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0), |
| |
| SOC_DOUBLE_TLV("Headphone Playback Volume", |
| SGTL5000_CHIP_ANA_HP_CTRL, |
| 0, 8, |
| 0x7f, 1, |
| headphone_volume), |
| SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL, |
| 5, 1, 0), |
| |
| SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL, |
| 0, 3, 0, mic_gain_tlv), |
| }; |
| |
| /* mute the codec used by alsa core */ |
| static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT; |
| |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL, |
| adcdac_ctrl, mute ? adcdac_ctrl : 0); |
| |
| return 0; |
| } |
| |
| /* set codec format */ |
| static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| u16 i2sctl = 0; |
| |
| sgtl5000->master = 0; |
| /* |
| * i2s clock and frame master setting. |
| * ONLY support: |
| * - clock and frame slave, |
| * - clock and frame master |
| */ |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| i2sctl |= SGTL5000_I2S_MASTER; |
| sgtl5000->master = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* setting i2s data format */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_DSP_A: |
| i2sctl |= SGTL5000_I2S_MODE_PCM; |
| break; |
| case SND_SOC_DAIFMT_DSP_B: |
| i2sctl |= SGTL5000_I2S_MODE_PCM; |
| i2sctl |= SGTL5000_I2S_LRALIGN; |
| break; |
| case SND_SOC_DAIFMT_I2S: |
| i2sctl |= SGTL5000_I2S_MODE_I2S_LJ; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| i2sctl |= SGTL5000_I2S_MODE_RJ; |
| i2sctl |= SGTL5000_I2S_LRPOL; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| i2sctl |= SGTL5000_I2S_MODE_I2S_LJ; |
| i2sctl |= SGTL5000_I2S_LRALIGN; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK; |
| |
| /* Clock inversion */ |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| i2sctl |= SGTL5000_I2S_SCLK_INV; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl); |
| |
| return 0; |
| } |
| |
| /* set codec sysclk */ |
| static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (clk_id) { |
| case SGTL5000_SYSCLK: |
| sgtl5000->sysclk = freq; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * set clock according to i2s frame clock, |
| * sgtl5000 provide 2 clock sources. |
| * 1. sys_mclk. sample freq can only configure to |
| * 1/256, 1/384, 1/512 of sys_mclk. |
| * 2. pll. can derive any audio clocks. |
| * |
| * clock setting rules: |
| * 1. in slave mode, only sys_mclk can use. |
| * 2. as constraint by sys_mclk, sample freq should |
| * set to 32k, 44.1k and above. |
| * 3. using sys_mclk prefer to pll to save power. |
| */ |
| static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate) |
| { |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| int clk_ctl = 0; |
| int sys_fs; /* sample freq */ |
| |
| /* |
| * sample freq should be divided by frame clock, |
| * if frame clock lower than 44.1khz, sample feq should set to |
| * 32khz or 44.1khz. |
| */ |
| switch (frame_rate) { |
| case 8000: |
| case 16000: |
| sys_fs = 32000; |
| break; |
| case 11025: |
| case 22050: |
| sys_fs = 44100; |
| break; |
| default: |
| sys_fs = frame_rate; |
| break; |
| } |
| |
| /* set divided factor of frame clock */ |
| switch (sys_fs / frame_rate) { |
| case 4: |
| clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT; |
| break; |
| case 2: |
| clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT; |
| break; |
| case 1: |
| clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* set the sys_fs according to frame rate */ |
| switch (sys_fs) { |
| case 32000: |
| clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT; |
| break; |
| case 44100: |
| clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT; |
| break; |
| case 48000: |
| clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT; |
| break; |
| case 96000: |
| clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT; |
| break; |
| default: |
| dev_err(codec->dev, "frame rate %d not supported\n", |
| frame_rate); |
| return -EINVAL; |
| } |
| |
| /* |
| * calculate the divider of mclk/sample_freq, |
| * factor of freq =96k can only be 256, since mclk in range (12m,27m) |
| */ |
| switch (sgtl5000->sysclk / sys_fs) { |
| case 256: |
| clk_ctl |= SGTL5000_MCLK_FREQ_256FS << |
| SGTL5000_MCLK_FREQ_SHIFT; |
| break; |
| case 384: |
| clk_ctl |= SGTL5000_MCLK_FREQ_384FS << |
| SGTL5000_MCLK_FREQ_SHIFT; |
| break; |
| case 512: |
| clk_ctl |= SGTL5000_MCLK_FREQ_512FS << |
| SGTL5000_MCLK_FREQ_SHIFT; |
| break; |
| default: |
| /* if mclk not satisify the divider, use pll */ |
| if (sgtl5000->master) { |
| clk_ctl |= SGTL5000_MCLK_FREQ_PLL << |
| SGTL5000_MCLK_FREQ_SHIFT; |
| } else { |
| dev_err(codec->dev, |
| "PLL not supported in slave mode\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* if using pll, please check manual 6.4.2 for detail */ |
| if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) { |
| u64 out, t; |
| int div2; |
| int pll_ctl; |
| unsigned int in, int_div, frac_div; |
| |
| if (sgtl5000->sysclk > 17000000) { |
| div2 = 1; |
| in = sgtl5000->sysclk / 2; |
| } else { |
| div2 = 0; |
| in = sgtl5000->sysclk; |
| } |
| if (sys_fs == 44100) |
| out = 180633600; |
| else |
| out = 196608000; |
| t = do_div(out, in); |
| int_div = out; |
| t *= 2048; |
| do_div(t, in); |
| frac_div = t; |
| pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT | |
| frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT; |
| |
| snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl); |
| if (div2) |
| snd_soc_update_bits(codec, |
| SGTL5000_CHIP_CLK_TOP_CTRL, |
| SGTL5000_INPUT_FREQ_DIV2, |
| SGTL5000_INPUT_FREQ_DIV2); |
| else |
| snd_soc_update_bits(codec, |
| SGTL5000_CHIP_CLK_TOP_CTRL, |
| SGTL5000_INPUT_FREQ_DIV2, |
| 0); |
| |
| /* power up pll */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP, |
| SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP); |
| } else { |
| /* power down pll */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP, |
| 0); |
| } |
| |
| /* if using pll, clk_ctrl must be set after pll power up */ |
| snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl); |
| |
| return 0; |
| } |
| |
| /* |
| * Set PCM DAI bit size and sample rate. |
| * input: params_rate, params_fmt |
| */ |
| static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| int channels = params_channels(params); |
| int i2s_ctl = 0; |
| int stereo; |
| int ret; |
| |
| /* sysclk should already set */ |
| if (!sgtl5000->sysclk) { |
| dev_err(codec->dev, "%s: set sysclk first!\n", __func__); |
| return -EFAULT; |
| } |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| stereo = SGTL5000_DAC_STEREO; |
| else |
| stereo = SGTL5000_ADC_STEREO; |
| |
| /* set mono to save power */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo, |
| channels == 1 ? 0 : stereo); |
| |
| /* set codec clock base on lrclk */ |
| ret = sgtl5000_set_clock(codec, params_rate(params)); |
| if (ret) |
| return ret; |
| |
| /* set i2s data format */ |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J) |
| return -EINVAL; |
| i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT; |
| i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS << |
| SGTL5000_I2S_SCLKFREQ_SHIFT; |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT; |
| i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << |
| SGTL5000_I2S_SCLKFREQ_SHIFT; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT; |
| i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << |
| SGTL5000_I2S_SCLKFREQ_SHIFT; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J) |
| return -EINVAL; |
| i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT; |
| i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << |
| SGTL5000_I2S_SCLKFREQ_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, |
| SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK, |
| i2s_ctl); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_REGULATOR |
| static int ldo_regulator_is_enabled(struct regulator_dev *dev) |
| { |
| struct ldo_regulator *ldo = rdev_get_drvdata(dev); |
| |
| return ldo->enabled; |
| } |
| |
| static int ldo_regulator_enable(struct regulator_dev *dev) |
| { |
| struct ldo_regulator *ldo = rdev_get_drvdata(dev); |
| struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data; |
| int reg; |
| |
| if (ldo_regulator_is_enabled(dev)) |
| return 0; |
| |
| /* set regulator value firstly */ |
| reg = (1600 - ldo->voltage / 1000) / 50; |
| reg = clamp(reg, 0x0, 0xf); |
| |
| /* amend the voltage value, unit: uV */ |
| ldo->voltage = (1600 - reg * 50) * 1000; |
| |
| /* set voltage to register */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, |
| SGTL5000_LINREG_VDDD_MASK, reg); |
| |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_LINEREG_D_POWERUP, |
| SGTL5000_LINEREG_D_POWERUP); |
| |
| /* when internal ldo enabled, simple digital power can be disabled */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_LINREG_SIMPLE_POWERUP, |
| 0); |
| |
| ldo->enabled = 1; |
| return 0; |
| } |
| |
| static int ldo_regulator_disable(struct regulator_dev *dev) |
| { |
| struct ldo_regulator *ldo = rdev_get_drvdata(dev); |
| struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data; |
| |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_LINEREG_D_POWERUP, |
| 0); |
| |
| /* clear voltage info */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, |
| SGTL5000_LINREG_VDDD_MASK, 0); |
| |
| ldo->enabled = 0; |
| |
| return 0; |
| } |
| |
| static int ldo_regulator_get_voltage(struct regulator_dev *dev) |
| { |
| struct ldo_regulator *ldo = rdev_get_drvdata(dev); |
| |
| return ldo->voltage; |
| } |
| |
| static struct regulator_ops ldo_regulator_ops = { |
| .is_enabled = ldo_regulator_is_enabled, |
| .enable = ldo_regulator_enable, |
| .disable = ldo_regulator_disable, |
| .get_voltage = ldo_regulator_get_voltage, |
| }; |
| |
| static int ldo_regulator_register(struct snd_soc_codec *codec, |
| struct regulator_init_data *init_data, |
| int voltage) |
| { |
| struct ldo_regulator *ldo; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| struct regulator_config config = { }; |
| |
| ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL); |
| |
| if (!ldo) { |
| dev_err(codec->dev, "failed to allocate ldo_regulator\n"); |
| return -ENOMEM; |
| } |
| |
| ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL); |
| if (!ldo->desc.name) { |
| kfree(ldo); |
| dev_err(codec->dev, "failed to allocate decs name memory\n"); |
| return -ENOMEM; |
| } |
| |
| ldo->desc.type = REGULATOR_VOLTAGE; |
| ldo->desc.owner = THIS_MODULE; |
| ldo->desc.ops = &ldo_regulator_ops; |
| ldo->desc.n_voltages = 1; |
| |
| ldo->codec_data = codec; |
| ldo->voltage = voltage; |
| |
| config.dev = codec->dev; |
| config.driver_data = ldo; |
| config.init_data = init_data; |
| |
| ldo->dev = regulator_register(&ldo->desc, &config); |
| if (IS_ERR(ldo->dev)) { |
| int ret = PTR_ERR(ldo->dev); |
| |
| dev_err(codec->dev, "failed to register regulator\n"); |
| kfree(ldo->desc.name); |
| kfree(ldo); |
| |
| return ret; |
| } |
| sgtl5000->ldo = ldo; |
| |
| return 0; |
| } |
| |
| static int ldo_regulator_remove(struct snd_soc_codec *codec) |
| { |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| struct ldo_regulator *ldo = sgtl5000->ldo; |
| |
| if (!ldo) |
| return 0; |
| |
| regulator_unregister(ldo->dev); |
| kfree(ldo->desc.name); |
| kfree(ldo); |
| |
| return 0; |
| } |
| #else |
| static int ldo_regulator_register(struct snd_soc_codec *codec, |
| struct regulator_init_data *init_data, |
| int voltage) |
| { |
| dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); |
| return -EINVAL; |
| } |
| |
| static int ldo_regulator_remove(struct snd_soc_codec *codec) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* |
| * set dac bias |
| * common state changes: |
| * startup: |
| * off --> standby --> prepare --> on |
| * standby --> prepare --> on |
| * |
| * stop: |
| * on --> prepare --> standby |
| */ |
| static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| int ret; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| case SND_SOC_BIAS_PREPARE: |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { |
| ret = regulator_bulk_enable( |
| ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| if (ret) |
| return ret; |
| udelay(10); |
| |
| regcache_cache_only(sgtl5000->regmap, false); |
| |
| ret = regcache_sync(sgtl5000->regmap); |
| if (ret != 0) { |
| dev_err(codec->dev, |
| "Failed to restore cache: %d\n", ret); |
| |
| regcache_cache_only(sgtl5000->regmap, true); |
| regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| |
| return ret; |
| } |
| } |
| |
| break; |
| case SND_SOC_BIAS_OFF: |
| regcache_cache_only(sgtl5000->regmap, true); |
| regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| break; |
| } |
| |
| codec->dapm.bias_level = level; |
| return 0; |
| } |
| |
| #define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ |
| SNDRV_PCM_FMTBIT_S20_3LE |\ |
| SNDRV_PCM_FMTBIT_S24_LE |\ |
| SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static const struct snd_soc_dai_ops sgtl5000_ops = { |
| .hw_params = sgtl5000_pcm_hw_params, |
| .digital_mute = sgtl5000_digital_mute, |
| .set_fmt = sgtl5000_set_dai_fmt, |
| .set_sysclk = sgtl5000_set_dai_sysclk, |
| }; |
| |
| static struct snd_soc_dai_driver sgtl5000_dai = { |
| .name = "sgtl5000", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| /* |
| * only support 8~48K + 96K, |
| * TODO modify hw_param to support more |
| */ |
| .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000, |
| .formats = SGTL5000_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000, |
| .formats = SGTL5000_FORMATS, |
| }, |
| .ops = &sgtl5000_ops, |
| .symmetric_rates = 1, |
| }; |
| |
| static bool sgtl5000_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case SGTL5000_CHIP_ID: |
| case SGTL5000_CHIP_ADCDAC_CTRL: |
| case SGTL5000_CHIP_ANA_STATUS: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool sgtl5000_readable(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case SGTL5000_CHIP_ID: |
| case SGTL5000_CHIP_DIG_POWER: |
| case SGTL5000_CHIP_CLK_CTRL: |
| case SGTL5000_CHIP_I2S_CTRL: |
| case SGTL5000_CHIP_SSS_CTRL: |
| case SGTL5000_CHIP_ADCDAC_CTRL: |
| case SGTL5000_CHIP_DAC_VOL: |
| case SGTL5000_CHIP_PAD_STRENGTH: |
| case SGTL5000_CHIP_ANA_ADC_CTRL: |
| case SGTL5000_CHIP_ANA_HP_CTRL: |
| case SGTL5000_CHIP_ANA_CTRL: |
| case SGTL5000_CHIP_LINREG_CTRL: |
| case SGTL5000_CHIP_REF_CTRL: |
| case SGTL5000_CHIP_MIC_CTRL: |
| case SGTL5000_CHIP_LINE_OUT_CTRL: |
| case SGTL5000_CHIP_LINE_OUT_VOL: |
| case SGTL5000_CHIP_ANA_POWER: |
| case SGTL5000_CHIP_PLL_CTRL: |
| case SGTL5000_CHIP_CLK_TOP_CTRL: |
| case SGTL5000_CHIP_ANA_STATUS: |
| case SGTL5000_CHIP_SHORT_CTRL: |
| case SGTL5000_CHIP_ANA_TEST2: |
| case SGTL5000_DAP_CTRL: |
| case SGTL5000_DAP_PEQ: |
| case SGTL5000_DAP_BASS_ENHANCE: |
| case SGTL5000_DAP_BASS_ENHANCE_CTRL: |
| case SGTL5000_DAP_AUDIO_EQ: |
| case SGTL5000_DAP_SURROUND: |
| case SGTL5000_DAP_FLT_COEF_ACCESS: |
| case SGTL5000_DAP_COEF_WR_B0_MSB: |
| case SGTL5000_DAP_COEF_WR_B0_LSB: |
| case SGTL5000_DAP_EQ_BASS_BAND0: |
| case SGTL5000_DAP_EQ_BASS_BAND1: |
| case SGTL5000_DAP_EQ_BASS_BAND2: |
| case SGTL5000_DAP_EQ_BASS_BAND3: |
| case SGTL5000_DAP_EQ_BASS_BAND4: |
| case SGTL5000_DAP_MAIN_CHAN: |
| case SGTL5000_DAP_MIX_CHAN: |
| case SGTL5000_DAP_AVC_CTRL: |
| case SGTL5000_DAP_AVC_THRESHOLD: |
| case SGTL5000_DAP_AVC_ATTACK: |
| case SGTL5000_DAP_AVC_DECAY: |
| case SGTL5000_DAP_COEF_WR_B1_MSB: |
| case SGTL5000_DAP_COEF_WR_B1_LSB: |
| case SGTL5000_DAP_COEF_WR_B2_MSB: |
| case SGTL5000_DAP_COEF_WR_B2_LSB: |
| case SGTL5000_DAP_COEF_WR_A1_MSB: |
| case SGTL5000_DAP_COEF_WR_A1_LSB: |
| case SGTL5000_DAP_COEF_WR_A2_MSB: |
| case SGTL5000_DAP_COEF_WR_A2_LSB: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| #ifdef CONFIG_SUSPEND |
| static int sgtl5000_suspend(struct snd_soc_codec *codec) |
| { |
| sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| |
| return 0; |
| } |
| |
| /* |
| * restore all sgtl5000 registers, |
| * since a big hole between dap and regular registers, |
| * we will restore them respectively. |
| */ |
| static int sgtl5000_restore_regs(struct snd_soc_codec *codec) |
| { |
| u16 *cache = codec->reg_cache; |
| u16 reg; |
| |
| /* restore regular registers */ |
| for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) { |
| |
| /* These regs should restore in particular order */ |
| if (reg == SGTL5000_CHIP_ANA_POWER || |
| reg == SGTL5000_CHIP_CLK_CTRL || |
| reg == SGTL5000_CHIP_LINREG_CTRL || |
| reg == SGTL5000_CHIP_LINE_OUT_CTRL || |
| reg == SGTL5000_CHIP_REF_CTRL) |
| continue; |
| |
| snd_soc_write(codec, reg, cache[reg]); |
| } |
| |
| /* restore dap registers */ |
| for (reg = SGTL5000_DAP_REG_OFFSET; reg < SGTL5000_MAX_REG_OFFSET; reg += 2) |
| snd_soc_write(codec, reg, cache[reg]); |
| |
| /* |
| * restore these regs according to the power setting sequence in |
| * sgtl5000_set_power_regs() and clock setting sequence in |
| * sgtl5000_set_clock(). |
| * |
| * The order of restore is: |
| * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after |
| * SGTL5000_CHIP_ANA_POWER PLL bits set |
| * 2. SGTL5000_CHIP_LINREG_CTRL should be set before |
| * SGTL5000_CHIP_ANA_POWER LINREG_D restored |
| * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage, |
| * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored |
| */ |
| snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, |
| cache[SGTL5000_CHIP_LINREG_CTRL]); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, |
| cache[SGTL5000_CHIP_ANA_POWER]); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, |
| cache[SGTL5000_CHIP_CLK_CTRL]); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL, |
| cache[SGTL5000_CHIP_REF_CTRL]); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL, |
| cache[SGTL5000_CHIP_LINE_OUT_CTRL]); |
| return 0; |
| } |
| |
| static int sgtl5000_resume(struct snd_soc_codec *codec) |
| { |
| /* Bring the codec back up to standby to enable regulators */ |
| sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| /* Restore registers by cached in memory */ |
| sgtl5000_restore_regs(codec); |
| return 0; |
| } |
| #else |
| #define sgtl5000_suspend NULL |
| #define sgtl5000_resume NULL |
| #endif /* CONFIG_SUSPEND */ |
| |
| /* |
| * sgtl5000 has 3 internal power supplies: |
| * 1. VAG, normally set to vdda/2 |
| * 2. chargepump, set to different value |
| * according to voltage of vdda and vddio |
| * 3. line out VAG, normally set to vddio/2 |
| * |
| * and should be set according to: |
| * 1. vddd provided by external or not |
| * 2. vdda and vddio voltage value. > 3.1v or not |
| * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd. |
| */ |
| static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) |
| { |
| int vddd; |
| int vdda; |
| int vddio; |
| u16 ana_pwr; |
| u16 lreg_ctrl; |
| int vag; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| |
| vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer); |
| vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer); |
| vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer); |
| |
| vdda = vdda / 1000; |
| vddio = vddio / 1000; |
| vddd = vddd / 1000; |
| |
| if (vdda <= 0 || vddio <= 0 || vddd < 0) { |
| dev_err(codec->dev, "regulator voltage not set correctly\n"); |
| |
| return -EINVAL; |
| } |
| |
| /* according to datasheet, maximum voltage of supplies */ |
| if (vdda > 3600 || vddio > 3600 || vddd > 1980) { |
| dev_err(codec->dev, |
| "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n", |
| vdda, vddio, vddd); |
| |
| return -EINVAL; |
| } |
| |
| /* reset value */ |
| ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER); |
| ana_pwr |= SGTL5000_DAC_STEREO | |
| SGTL5000_ADC_STEREO | |
| SGTL5000_REFTOP_POWERUP; |
| lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL); |
| |
| if (vddio < 3100 && vdda < 3100) { |
| /* enable internal oscillator used for charge pump */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL, |
| SGTL5000_INT_OSC_EN, |
| SGTL5000_INT_OSC_EN); |
| /* Enable VDDC charge pump */ |
| ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP; |
| } else if (vddio >= 3100 && vdda >= 3100) { |
| /* |
| * if vddio and vddd > 3.1v, |
| * charge pump should be clean before set ana_pwr |
| */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_VDDC_CHRGPMP_POWERUP, 0); |
| |
| /* VDDC use VDDIO rail */ |
| lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD; |
| lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO << |
| SGTL5000_VDDC_MAN_ASSN_SHIFT; |
| } |
| |
| snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr); |
| |
| /* set voltage to register */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, |
| SGTL5000_LINREG_VDDD_MASK, 0x8); |
| |
| /* |
| * if vddd linear reg has been enabled, |
| * simple digital supply should be clear to get |
| * proper VDDD voltage. |
| */ |
| if (ana_pwr & SGTL5000_LINEREG_D_POWERUP) |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_LINREG_SIMPLE_POWERUP, |
| 0); |
| else |
| snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, |
| SGTL5000_LINREG_SIMPLE_POWERUP | |
| SGTL5000_STARTUP_POWERUP, |
| 0); |
| |
| /* |
| * set ADC/DAC VAG to vdda / 2, |
| * should stay in range (0.8v, 1.575v) |
| */ |
| vag = vdda / 2; |
| if (vag <= SGTL5000_ANA_GND_BASE) |
| vag = 0; |
| else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP * |
| (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT)) |
| vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT; |
| else |
| vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP; |
| |
| snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, |
| SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT); |
| |
| /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ |
| vag = vddio / 2; |
| if (vag <= SGTL5000_LINE_OUT_GND_BASE) |
| vag = 0; |
| else if (vag >= SGTL5000_LINE_OUT_GND_BASE + |
| SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX) |
| vag = SGTL5000_LINE_OUT_GND_MAX; |
| else |
| vag = (vag - SGTL5000_LINE_OUT_GND_BASE) / |
| SGTL5000_LINE_OUT_GND_STP; |
| |
| snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL, |
| SGTL5000_LINE_OUT_CURRENT_MASK | |
| SGTL5000_LINE_OUT_GND_MASK, |
| vag << SGTL5000_LINE_OUT_GND_SHIFT | |
| SGTL5000_LINE_OUT_CURRENT_360u << |
| SGTL5000_LINE_OUT_CURRENT_SHIFT); |
| |
| return 0; |
| } |
| |
| static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec) |
| { |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| int ret; |
| |
| /* set internal ldo to 1.2v */ |
| ret = ldo_regulator_register(codec, &ldo_init_data, LDO_VOLTAGE); |
| if (ret) { |
| dev_err(codec->dev, |
| "Failed to register vddd internal supplies: %d\n", ret); |
| return ret; |
| } |
| |
| sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME; |
| |
| ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| |
| if (ret) { |
| ldo_regulator_remove(codec); |
| dev_err(codec->dev, "Failed to request supplies: %d\n", ret); |
| return ret; |
| } |
| |
| dev_info(codec->dev, "Using internal LDO instead of VDDD\n"); |
| return 0; |
| } |
| |
| static int sgtl5000_enable_regulators(struct snd_soc_codec *codec) |
| { |
| int reg; |
| int ret; |
| int rev; |
| int i; |
| int external_vddd = 0; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| |
| for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++) |
| sgtl5000->supplies[i].supply = supply_names[i]; |
| |
| ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| if (!ret) |
| external_vddd = 1; |
| else { |
| ret = sgtl5000_replace_vddd_with_ldo(codec); |
| if (ret) |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| if (ret) |
| goto err_regulator_free; |
| |
| /* wait for all power rails bring up */ |
| udelay(10); |
| |
| /* |
| * workaround for revision 0x11 and later, |
| * roll back to use internal LDO |
| */ |
| |
| ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); |
| if (ret) |
| goto err_regulator_disable; |
| |
| rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; |
| |
| if (external_vddd && rev >= 0x11) { |
| /* disable all regulator first */ |
| regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| /* free VDDD regulator */ |
| regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| |
| ret = sgtl5000_replace_vddd_with_ldo(codec); |
| if (ret) |
| return ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| if (ret) |
| goto err_regulator_free; |
| |
| /* wait for all power rails bring up */ |
| udelay(10); |
| } |
| |
| return 0; |
| |
| err_regulator_disable: |
| regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| err_regulator_free: |
| regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| if (external_vddd) |
| ldo_regulator_remove(codec); |
| return ret; |
| |
| } |
| |
| static int sgtl5000_probe(struct snd_soc_codec *codec) |
| { |
| int ret; |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| |
| /* setup i2c data ops */ |
| codec->control_data = sgtl5000->regmap; |
| ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); |
| return ret; |
| } |
| |
| ret = sgtl5000_enable_regulators(codec); |
| if (ret) |
| return ret; |
| |
| /* power up sgtl5000 */ |
| ret = sgtl5000_set_power_regs(codec); |
| if (ret) |
| goto err; |
| |
| /* enable small pop, introduce 400ms delay in turning off */ |
| snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, |
| SGTL5000_SMALL_POP, |
| SGTL5000_SMALL_POP); |
| |
| /* disable short cut detector */ |
| snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0); |
| |
| /* |
| * set i2s as default input of sound switch |
| * TODO: add sound switch to control and dapm widge. |
| */ |
| snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL, |
| SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT); |
| snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER, |
| SGTL5000_ADC_EN | SGTL5000_DAC_EN); |
| |
| /* enable dac volume ramp by default */ |
| snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL, |
| SGTL5000_DAC_VOL_RAMP_EN | |
| SGTL5000_DAC_MUTE_RIGHT | |
| SGTL5000_DAC_MUTE_LEFT); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL, |
| SGTL5000_HP_ZCD_EN | |
| SGTL5000_ADC_ZCD_EN); |
| |
| snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2); |
| |
| /* |
| * disable DAP |
| * TODO: |
| * Enable DAP in kcontrol and dapm. |
| */ |
| snd_soc_write(codec, SGTL5000_DAP_CTRL, 0); |
| |
| /* leading to standby state */ |
| ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| if (ret) |
| goto err; |
| |
| return 0; |
| |
| err: |
| regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| ldo_regulator_remove(codec); |
| |
| return ret; |
| } |
| |
| static int sgtl5000_remove(struct snd_soc_codec *codec) |
| { |
| struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); |
| |
| sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| |
| regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), |
| sgtl5000->supplies); |
| ldo_regulator_remove(codec); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_codec_driver sgtl5000_driver = { |
| .probe = sgtl5000_probe, |
| .remove = sgtl5000_remove, |
| .suspend = sgtl5000_suspend, |
| .resume = sgtl5000_resume, |
| .set_bias_level = sgtl5000_set_bias_level, |
| .controls = sgtl5000_snd_controls, |
| .num_controls = ARRAY_SIZE(sgtl5000_snd_controls), |
| .dapm_widgets = sgtl5000_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets), |
| .dapm_routes = sgtl5000_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes), |
| }; |
| |
| static const struct regmap_config sgtl5000_regmap = { |
| .reg_bits = 16, |
| .val_bits = 16, |
| |
| .max_register = SGTL5000_MAX_REG_OFFSET, |
| .volatile_reg = sgtl5000_volatile, |
| .readable_reg = sgtl5000_readable, |
| |
| .cache_type = REGCACHE_RBTREE, |
| .reg_defaults = sgtl5000_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults), |
| }; |
| |
| /* |
| * Write all the default values from sgtl5000_reg_defaults[] array into the |
| * sgtl5000 registers, to make sure we always start with the sane registers |
| * values as stated in the datasheet. |
| * |
| * Since sgtl5000 does not have a reset line, nor a reset command in software, |
| * we follow this approach to guarantee we always start from the default values |
| * and avoid problems like, not being able to probe after an audio playback |
| * followed by a system reset or a 'reboot' command in Linux |
| */ |
| static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000) |
| { |
| int i, ret, val, index; |
| |
| for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) { |
| val = sgtl5000_reg_defaults[i].def; |
| index = sgtl5000_reg_defaults[i].reg; |
| ret = regmap_write(sgtl5000->regmap, index, val); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sgtl5000_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct sgtl5000_priv *sgtl5000; |
| int ret, reg, rev; |
| |
| sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), |
| GFP_KERNEL); |
| if (!sgtl5000) |
| return -ENOMEM; |
| |
| sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap); |
| if (IS_ERR(sgtl5000->regmap)) { |
| ret = PTR_ERR(sgtl5000->regmap); |
| dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret); |
| return ret; |
| } |
| |
| sgtl5000->mclk = devm_clk_get(&client->dev, NULL); |
| if (IS_ERR(sgtl5000->mclk)) { |
| ret = PTR_ERR(sgtl5000->mclk); |
| dev_err(&client->dev, "Failed to get mclock: %d\n", ret); |
| /* Defer the probe to see if the clk will be provided later */ |
| if (ret == -ENOENT) |
| return -EPROBE_DEFER; |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(sgtl5000->mclk); |
| if (ret) |
| return ret; |
| |
| /* read chip information */ |
| ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); |
| if (ret) |
| goto disable_clk; |
| |
| if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != |
| SGTL5000_PARTID_PART_ID) { |
| dev_err(&client->dev, |
| "Device with ID register %x is not a sgtl5000\n", reg); |
| ret = -ENODEV; |
| goto disable_clk; |
| } |
| |
| rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; |
| dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); |
| |
| i2c_set_clientdata(client, sgtl5000); |
| |
| /* Ensure sgtl5000 will start with sane register values */ |
| ret = sgtl5000_fill_defaults(sgtl5000); |
| if (ret) |
| goto disable_clk; |
| |
| ret = snd_soc_register_codec(&client->dev, |
| &sgtl5000_driver, &sgtl5000_dai, 1); |
| if (ret) |
| goto disable_clk; |
| |
| return 0; |
| |
| disable_clk: |
| clk_disable_unprepare(sgtl5000->mclk); |
| return ret; |
| } |
| |
| static int sgtl5000_i2c_remove(struct i2c_client *client) |
| { |
| struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client); |
| |
| snd_soc_unregister_codec(&client->dev); |
| clk_disable_unprepare(sgtl5000->mclk); |
| return 0; |
| } |
| |
| static const struct i2c_device_id sgtl5000_id[] = { |
| {"sgtl5000", 0}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, sgtl5000_id); |
| |
| static const struct of_device_id sgtl5000_dt_ids[] = { |
| { .compatible = "fsl,sgtl5000", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids); |
| |
| static struct i2c_driver sgtl5000_i2c_driver = { |
| .driver = { |
| .name = "sgtl5000", |
| .owner = THIS_MODULE, |
| .of_match_table = sgtl5000_dt_ids, |
| }, |
| .probe = sgtl5000_i2c_probe, |
| .remove = sgtl5000_i2c_remove, |
| .id_table = sgtl5000_id, |
| }; |
| |
| module_i2c_driver(sgtl5000_i2c_driver); |
| |
| MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver"); |
| MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>"); |
| MODULE_LICENSE("GPL"); |