[media] anysee: add support for Anysee E30 S2 Plus
It is USB DVB-S/S2 box.
Conexant cx24116/cx24118 demod tuner combo
Intersil ISL6423 LNB controller
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 0e94541..ebcc05b 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -37,6 +37,8 @@
#include "mt352_priv.h"
#include "zl10353.h"
#include "tda18212.h"
+#include "cx24116.h"
+#include "isl6423.h"
/* debug */
static int dvb_usb_anysee_debug;
@@ -300,6 +302,19 @@
.if_dvbc = 5000,
};
+static struct cx24116_config anysee_cx24116_config = {
+ .demod_address = (0xaa >> 1),
+ .mpg_clk_pos_pol = 0x00,
+ .i2c_wr_max = 48,
+};
+
+static struct isl6423_config anysee_isl6423_config = {
+ .current_max = SEC_CURRENT_800m,
+ .curlim = SEC_CURRENT_LIM_OFF,
+ .mod_extern = 1,
+ .addr = (0x10 >> 1),
+};
+
/*
* New USB device strings: Mfr=1, Product=2, SerialNumber=0
* Manufacturer: AMT.CO.KR
@@ -328,6 +343,13 @@
* IOA=4f IOB=ff IOC=00 IOD=26 IOF=01
* IOD[0] TDA10023 1=enabled
*
+ * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
+ * PCB: 507SI (rev2.1)
+ * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01
+ * IOD[0] CX24116 1=enabled
+ *
* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
* PCB: 507FA (rev0.4)
* parts: TDA10023, DTOS403IH102B TM, TDA8024
@@ -449,6 +471,19 @@
&adap->dev->i2c_adap, 0x48);
break;
+ case ANYSEE_HW_507SI: /* 11 */
+ /* E30 S2 Plus */
+
+ /* enable DVB-S/S2 demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe = dvb_attach(cx24116_attach, &anysee_cx24116_config,
+ &adap->dev->i2c_adap);
+
+ break;
case ANYSEE_HW_507FA: /* 15 */
/* E30 Combo Plus */
/* E30 C Plus */
@@ -625,6 +660,14 @@
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
break;
+ case ANYSEE_HW_507SI: /* 11 */
+ /* E30 S2 Plus */
+
+ /* attach LNB controller */
+ fe = dvb_attach(isl6423_attach, adap->fe, &adap->dev->i2c_adap,
+ &anysee_isl6423_config);
+
+ break;
case ANYSEE_HW_507FA: /* 15 */
/* E30 Combo Plus */
/* E30 C Plus */