drivers/misc/apds9802als.c: add runtime PM support

Update the driver for the needed runtime power features.  Remove the old
user controlled power functions.

[akpm@linux-foundation.org: put PM code under CONFIG_PM]
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index fbe4960..f9b91ba 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -29,19 +29,16 @@
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
-#include <linux/hwmon-sysfs.h>
+#include <linux/pm_runtime.h>
 
 #define ALS_MIN_RANGE_VAL 1
 #define ALS_MAX_RANGE_VAL 2
 #define POWER_STA_ENABLE 1
 #define POWER_STA_DISABLE 0
-#define APDS9802ALS_I2C_ADDR 0x29
 
 #define DRIVER_NAME "apds9802als"
 
 struct als_data {
-	struct device *hwmon_dev;
-	bool needresume;
 	struct mutex mutex;
 };
 
@@ -60,29 +57,64 @@
 		return sprintf(buf, "65535\n");
 }
 
+static int als_wait_for_data_ready(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+	int retry = 10;
+
+	do {
+		msleep(30);
+		ret = i2c_smbus_read_byte_data(client, 0x86);
+	} while (!(ret & 0x80) && retry--);
+
+	if (!retry) {
+		dev_warn(dev, "timeout waiting for data ready\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
 static ssize_t als_lux0_input_data_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct als_data *data = i2c_get_clientdata(client);
-	unsigned int ret_val;
+	int ret_val;
 	int temp;
 
 	/* Protect against parallel reads */
+	pm_runtime_get_sync(dev);
 	mutex_lock(&data->mutex);
-	temp = i2c_smbus_read_byte_data(client, 0x8C);/*LSB data*/
+
+	/* clear EOC interrupt status */
+	i2c_smbus_write_byte(client, 0x40);
+	/* start measurement */
+	temp = i2c_smbus_read_byte_data(client, 0x81);
+	i2c_smbus_write_byte_data(client, 0x81, temp | 0x08);
+
+	ret_val = als_wait_for_data_ready(dev);
+	if (ret_val < 0)
+		goto failed;
+
+	temp = i2c_smbus_read_byte_data(client, 0x8C); /* LSB data */
 	if (temp < 0) {
 		ret_val = temp;
 		goto failed;
 	}
-	ret_val = i2c_smbus_read_byte_data(client, 0x8D);/*MSB data*/
+	ret_val = i2c_smbus_read_byte_data(client, 0x8D); /* MSB data */
 	if (ret_val < 0)
 		goto failed;
+
 	mutex_unlock(&data->mutex);
-	ret_val = (ret_val << 8) | temp;
-	return sprintf(buf, "%d\n", ret_val);
+	pm_runtime_put_sync(dev);
+
+	temp = (ret_val << 8) | temp;
+	return sprintf(buf, "%d\n", temp);
 failed:
 	mutex_unlock(&data->mutex);
+	pm_runtime_put_sync(dev);
 	return ret_val;
 }
 
@@ -104,9 +136,10 @@
 	else
 		return -ERANGE;
 
+	pm_runtime_get_sync(dev);
+
 	/* Make sure nobody else reads/modifies/writes 0x81 while we
 	   are active */
-
 	mutex_lock(&data->mutex);
 
 	ret_val = i2c_smbus_read_byte_data(client, 0x81);
@@ -116,34 +149,25 @@
 	/* Reset the bits before setting them */
 	ret_val = ret_val & 0xFA;
 
-	if (val == 1) /* Setting the continous measurement up to 4k LUX */
-		ret_val = (ret_val | 0x05);
-	else /* Setting the continous measurement up to 64k LUX*/
-		ret_val = (ret_val | 0x04);
+	if (val == 1) /* Setting detection range up to 4k LUX */
+		ret_val = (ret_val | 0x01);
+	else /* Setting detection range up to 64k LUX*/
+		ret_val = (ret_val | 0x00);
 
 	ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val);
+
 	if (ret_val >= 0) {
 		/* All OK */
 		mutex_unlock(&data->mutex);
+		pm_runtime_put_sync(dev);
 		return count;
 	}
 fail:
 	mutex_unlock(&data->mutex);
+	pm_runtime_put_sync(dev);
 	return ret_val;
 }
 
-static ssize_t als_power_status_show(struct device *dev,
-			struct device_attribute *attr, char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	int ret_val;
-	ret_val = i2c_smbus_read_byte_data(client, 0x80);
-	if (ret_val < 0)
-		return ret_val;
-	ret_val = ret_val & 0x01;
-	return sprintf(buf, "%d\n", ret_val);
-}
-
 static int als_set_power_state(struct i2c_client *client, bool on_off)
 {
 	int ret_val;
@@ -163,39 +187,13 @@
 	return ret_val;
 }
 
-static ssize_t als_power_status_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct als_data *data = i2c_get_clientdata(client);
-	unsigned long val;
-	int ret_val;
-
-	if (strict_strtoul(buf, 10, &val))
-		return -EINVAL;
-	if (val == POWER_STA_ENABLE) {
-		ret_val = als_set_power_state(client, true);
-		data->needresume = true;
-	} else if (val == POWER_STA_DISABLE) {
-		ret_val = als_set_power_state(client, false);
-		data->needresume = false;
-	} else
-		return -EINVAL;
-	if (ret_val < 0)
-		return ret_val;
-	return count;
-}
-
 static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
 	als_sensing_range_show, als_sensing_range_store);
 static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux0_input_data_show, NULL);
-static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
-	als_power_status_show, als_power_status_store);
 
 static struct attribute *mid_att_als[] = {
 	&dev_attr_lux0_sensor_range.attr,
 	&dev_attr_lux0_input.attr,
-	&dev_attr_power_state.attr,
 	NULL
 };
 
@@ -213,15 +211,21 @@
 		dev_err(&client->dev, "failed default switch on write\n");
 		return ret_val;
 	}
-	/* Continous from 1Lux to 64k Lux */
-	ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x04);
+	/* detection range: 1~64K Lux, maunal measurement */
+	ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x08);
 	if (ret_val < 0)
 		dev_err(&client->dev, "failed default LUX on write\n");
+
+	/*  We always get 0 for the 1st measurement after system power on,
+	 *  so make sure it is finished before user asks for data.
+	 */
+	als_wait_for_data_ready(&client->dev);
+
 	return ret_val;
 }
 
-static int  apds9802als_probe(struct i2c_client *client,
-					const struct i2c_device_id *id)
+static int apds9802als_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
 	int res;
 	struct als_data *data;
@@ -237,11 +241,14 @@
 		dev_err(&client->dev, "device create file failed\n");
 		goto als_error1;
 	}
-	dev_info(&client->dev,
-		"%s apds9802als: ALS chip found\n", client->name);
+	dev_info(&client->dev, "ALS chip found\n");
 	als_set_default_config(client);
-	data->needresume = true;
 	mutex_init(&data->mutex);
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_get(&client->dev);
+	pm_runtime_put(&client->dev);
+
 	return res;
 als_error1:
 	i2c_set_clientdata(client, NULL);
@@ -252,11 +259,14 @@
 static int apds9802als_remove(struct i2c_client *client)
 {
 	struct als_data *data = i2c_get_clientdata(client);
+
+	als_set_power_state(client, false);
 	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
 	kfree(data);
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg)
 {
 	als_set_power_state(client, false);
@@ -265,13 +275,42 @@
 
 static int apds9802als_resume(struct i2c_client *client)
 {
-	struct als_data *data = i2c_get_clientdata(client);
+	als_set_default_config(client);
 
-	if (data->needresume == true)
-		als_set_power_state(client, true);
+	pm_runtime_get(&client->dev);
+	pm_runtime_put(&client->dev);
 	return 0;
 }
 
+static int apds9802als_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	als_set_power_state(client, false);
+	return 0;
+}
+
+static int apds9802als_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	als_set_power_state(client, true);
+	return 0;
+}
+
+static const struct dev_pm_ops apds9802als_pm_ops = {
+	.runtime_suspend = apds9802als_runtime_suspend,
+	.runtime_resume = apds9802als_runtime_resume,
+};
+
+#define APDS9802ALS_PM_OPS (&apds9802als_pm_ops)
+
+#else	/* CONFIG_PM */
+#define apds9802als_suspend NULL
+#define apds9802als_resume NULL
+#define APDS9802ALS_PM_OPS NULL
+#endif	/* CONFIG_PM */
+
 static struct i2c_device_id apds9802als_id[] = {
 	{ DRIVER_NAME, 0 },
 	{ }
@@ -281,8 +320,8 @@
 
 static struct i2c_driver apds9802als_driver = {
 	.driver = {
-	.name = DRIVER_NAME,
-	.owner = THIS_MODULE,
+		.name = DRIVER_NAME,
+		.pm = APDS9802ALS_PM_OPS,
 	},
 	.probe = apds9802als_probe,
 	.remove = apds9802als_remove,