USB: EHCI hooks for high speed electrical tests
EHCI hooks for high speed electrical tests of the root hub ports.
The expectation is that a usermode program actually triggers the test,
making the same control request it would make for an external hub.
Tests for peripheral upstream ports would issue a different request.
In all cases, the hardware needs re-initialization before it could
be used "normally" again (e.g. unplug/replug, rmmod/modprobe).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1b20722..7c170a2 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -319,6 +319,7 @@
u32 temp, status;
unsigned long flags;
int retval = 0;
+ unsigned selector;
/*
* FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
@@ -506,6 +507,8 @@
}
break;
case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
@@ -559,6 +562,22 @@
}
writel (temp, &ehci->regs->port_status [wIndex]);
break;
+
+ /* For downstream facing ports (these): one hub port is put
+ * into test mode according to USB2 11.24.2.13, then the hub
+ * must be reset (which for root hub now means rmmod+modprobe,
+ * or else system reboot). See EHCI 2.3.9 and 4.14 for info
+ * about the EHCI-specific stuff.
+ */
+ case USB_PORT_FEAT_TEST:
+ if (!selector || selector > 5)
+ goto error;
+ ehci_quiesce(ehci);
+ ehci_halt(ehci);
+ temp |= selector << 16;
+ writel (temp, &ehci->regs->port_status [wIndex]);
+ break;
+
default:
goto error;
}