| /* |
| * extcon-arizona.c - Extcon driver Wolfson Arizona devices |
| * |
| * Copyright (C) 2012 Wolfson Microelectronics plc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/extcon.h> |
| |
| #include <sound/soc.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| #include <linux/mfd/arizona/pdata.h> |
| #include <linux/mfd/arizona/registers.h> |
| |
| #define ARIZONA_NUM_BUTTONS 6 |
| |
| #define ARIZONA_ACCDET_MODE_MIC 0 |
| #define ARIZONA_ACCDET_MODE_HPL 1 |
| #define ARIZONA_ACCDET_MODE_HPR 2 |
| |
| struct arizona_extcon_info { |
| struct device *dev; |
| struct arizona *arizona; |
| struct mutex lock; |
| struct regulator *micvdd; |
| struct input_dev *input; |
| |
| int micd_mode; |
| const struct arizona_micd_config *micd_modes; |
| int micd_num_modes; |
| |
| bool micd_reva; |
| bool micd_clamp; |
| |
| struct delayed_work hpdet_work; |
| |
| bool hpdet_active; |
| bool hpdet_done; |
| |
| int num_hpdet_res; |
| unsigned int hpdet_res[3]; |
| |
| bool mic; |
| bool detecting; |
| int jack_flips; |
| |
| int hpdet_ip; |
| |
| struct extcon_dev edev; |
| }; |
| |
| static const struct arizona_micd_config micd_default_modes[] = { |
| { 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 }, |
| { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, |
| }; |
| |
| static struct { |
| u16 status; |
| int report; |
| } arizona_lvl_to_key[ARIZONA_NUM_BUTTONS] = { |
| { 0x1, BTN_0 }, |
| { 0x2, BTN_1 }, |
| { 0x4, BTN_2 }, |
| { 0x8, BTN_3 }, |
| { 0x10, BTN_4 }, |
| { 0x20, BTN_5 }, |
| }; |
| |
| #define ARIZONA_CABLE_MECHANICAL 0 |
| #define ARIZONA_CABLE_MICROPHONE 1 |
| #define ARIZONA_CABLE_HEADPHONE 2 |
| #define ARIZONA_CABLE_LINEOUT 3 |
| |
| static const char *arizona_cable[] = { |
| "Mechanical", |
| "Microphone", |
| "Headphone", |
| "Line-out", |
| NULL, |
| }; |
| |
| static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) |
| { |
| struct arizona *arizona = info->arizona; |
| |
| if (arizona->pdata.micd_pol_gpio > 0) |
| gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, |
| info->micd_modes[mode].gpio); |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_BIAS_SRC_MASK, |
| info->micd_modes[mode].bias); |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); |
| |
| info->micd_mode = mode; |
| |
| dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); |
| } |
| |
| static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) |
| { |
| switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) { |
| case 1: |
| return "MICBIAS1"; |
| case 2: |
| return "MICBIAS2"; |
| case 3: |
| return "MICBIAS3"; |
| default: |
| return "MICVDD"; |
| } |
| } |
| |
| static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| const char *widget = arizona_extcon_get_micbias(info); |
| struct snd_soc_dapm_context *dapm = arizona->dapm; |
| int ret; |
| |
| mutex_lock(&dapm->card->dapm_mutex); |
| |
| ret = snd_soc_dapm_force_enable_pin(dapm, widget); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to enable %s: %d\n", |
| widget, ret); |
| |
| mutex_unlock(&dapm->card->dapm_mutex); |
| |
| snd_soc_dapm_sync(dapm); |
| |
| if (!arizona->pdata.micd_force_micbias) { |
| mutex_lock(&dapm->card->dapm_mutex); |
| |
| ret = snd_soc_dapm_disable_pin(arizona->dapm, widget); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to disable %s: %d\n", |
| widget, ret); |
| |
| mutex_unlock(&dapm->card->dapm_mutex); |
| |
| snd_soc_dapm_sync(dapm); |
| } |
| } |
| |
| static void arizona_start_mic(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| bool change; |
| int ret; |
| |
| /* Microphone detection can't use idle mode */ |
| pm_runtime_get(info->dev); |
| |
| if (info->detecting) { |
| ret = regulator_allow_bypass(info->micvdd, false); |
| if (ret != 0) { |
| dev_err(arizona->dev, |
| "Failed to regulate MICVDD: %d\n", |
| ret); |
| } |
| } |
| |
| ret = regulator_enable(info->micvdd); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", |
| ret); |
| } |
| |
| if (info->micd_reva) { |
| regmap_write(arizona->regmap, 0x80, 0x3); |
| regmap_write(arizona->regmap, 0x294, 0); |
| regmap_write(arizona->regmap, 0x80, 0x0); |
| } |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| arizona_extcon_pulse_micbias(info); |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, |
| &change); |
| if (!change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_put_autosuspend(info->dev); |
| } |
| } |
| |
| static void arizona_stop_mic(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| const char *widget = arizona_extcon_get_micbias(info); |
| struct snd_soc_dapm_context *dapm = arizona->dapm; |
| bool change; |
| int ret; |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, 0, |
| &change); |
| |
| mutex_lock(&dapm->card->dapm_mutex); |
| |
| ret = snd_soc_dapm_disable_pin(dapm, widget); |
| if (ret != 0) |
| dev_warn(arizona->dev, |
| "Failed to disable %s: %d\n", |
| widget, ret); |
| |
| mutex_unlock(&dapm->card->dapm_mutex); |
| |
| snd_soc_dapm_sync(dapm); |
| |
| if (info->micd_reva) { |
| regmap_write(arizona->regmap, 0x80, 0x3); |
| regmap_write(arizona->regmap, 0x294, 2); |
| regmap_write(arizona->regmap, 0x80, 0x0); |
| } |
| |
| ret = regulator_allow_bypass(info->micvdd, true); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", |
| ret); |
| } |
| |
| if (change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_mark_last_busy(info->dev); |
| pm_runtime_put_autosuspend(info->dev); |
| } |
| } |
| |
| static struct { |
| unsigned int factor_a; |
| unsigned int factor_b; |
| } arizona_hpdet_b_ranges[] = { |
| { 5528, 362464 }, |
| { 11084, 6186851 }, |
| { 11065, 65460395 }, |
| }; |
| |
| static struct { |
| int min; |
| int max; |
| } arizona_hpdet_c_ranges[] = { |
| { 0, 30 }, |
| { 8, 100 }, |
| { 100, 1000 }, |
| { 1000, 10000 }, |
| }; |
| |
| static int arizona_hpdet_read(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| unsigned int val, range; |
| int ret; |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read HPDET status: %d\n", |
| ret); |
| return ret; |
| } |
| |
| switch (info->hpdet_ip) { |
| case 0: |
| if (!(val & ARIZONA_HP_DONE)) { |
| dev_err(arizona->dev, "HPDET did not complete: %x\n", |
| val); |
| return -EAGAIN; |
| } |
| |
| val &= ARIZONA_HP_LVL_MASK; |
| break; |
| |
| case 1: |
| if (!(val & ARIZONA_HP_DONE_B)) { |
| dev_err(arizona->dev, "HPDET did not complete: %x\n", |
| val); |
| return -EAGAIN; |
| } |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read HP value: %d\n", |
| ret); |
| return -EAGAIN; |
| } |
| |
| regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| &range); |
| range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) |
| >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; |
| |
| if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && |
| (val < 100 || val > 0x3fb)) { |
| range++; |
| dev_dbg(arizona->dev, "Moving to HPDET range %d\n", |
| range); |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK, |
| range << |
| ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); |
| return -EAGAIN; |
| } |
| |
| /* If we go out of range report top of range */ |
| if (val < 100 || val > 0x3fb) { |
| dev_dbg(arizona->dev, "Measurement out of range\n"); |
| return 10000; |
| } |
| |
| dev_dbg(arizona->dev, "HPDET read %d in range %d\n", |
| val, range); |
| |
| val = arizona_hpdet_b_ranges[range].factor_b |
| / ((val * 100) - |
| arizona_hpdet_b_ranges[range].factor_a); |
| break; |
| |
| default: |
| dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", |
| info->hpdet_ip); |
| case 2: |
| if (!(val & ARIZONA_HP_DONE_B)) { |
| dev_err(arizona->dev, "HPDET did not complete: %x\n", |
| val); |
| return -EAGAIN; |
| } |
| |
| val &= ARIZONA_HP_LVL_B_MASK; |
| |
| regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| &range); |
| range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) |
| >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; |
| |
| /* Skip up or down a range? */ |
| if (range && (val < arizona_hpdet_c_ranges[range].min)) { |
| range--; |
| dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", |
| arizona_hpdet_c_ranges[range].min, |
| arizona_hpdet_c_ranges[range].max); |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK, |
| range << |
| ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); |
| return -EAGAIN; |
| } |
| |
| if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && |
| (val >= arizona_hpdet_c_ranges[range].max)) { |
| range++; |
| dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", |
| arizona_hpdet_c_ranges[range].min, |
| arizona_hpdet_c_ranges[range].max); |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK, |
| range << |
| ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); |
| return -EAGAIN; |
| } |
| } |
| |
| dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); |
| return val; |
| } |
| |
| static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading) |
| { |
| struct arizona *arizona = info->arizona; |
| int id_gpio = arizona->pdata.hpdet_id_gpio; |
| |
| /* |
| * If we're using HPDET for accessory identification we need |
| * to take multiple measurements, step through them in sequence. |
| */ |
| if (arizona->pdata.hpdet_acc_id) { |
| info->hpdet_res[info->num_hpdet_res++] = *reading; |
| |
| /* |
| * If the impedence is too high don't measure the |
| * second ground. |
| */ |
| if (info->num_hpdet_res == 1 && *reading >= 45) { |
| dev_dbg(arizona->dev, "Skipping ground flip\n"); |
| info->hpdet_res[info->num_hpdet_res++] = *reading; |
| } |
| |
| if (info->num_hpdet_res == 1) { |
| dev_dbg(arizona->dev, "Flipping ground\n"); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC, |
| ~info->micd_modes[0].src); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| return -EAGAIN; |
| } |
| |
| /* Only check the mic directly if we didn't already ID it */ |
| if (id_gpio && info->num_hpdet_res == 2 && |
| !((info->hpdet_res[0] > info->hpdet_res[1] * 2))) { |
| dev_dbg(arizona->dev, "Measuring mic\n"); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK | |
| ARIZONA_ACCDET_SRC, |
| ARIZONA_ACCDET_MODE_HPR | |
| info->micd_modes[0].src); |
| |
| gpio_set_value_cansleep(id_gpio, 1); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| return -EAGAIN; |
| } |
| |
| /* OK, got both. Now, compare... */ |
| dev_dbg(arizona->dev, "HPDET measured %d %d %d\n", |
| info->hpdet_res[0], info->hpdet_res[1], |
| info->hpdet_res[2]); |
| |
| |
| /* Take the headphone impedance for the main report */ |
| *reading = info->hpdet_res[0]; |
| |
| /* |
| * Either the two grounds measure differently or we |
| * measure the mic as high impedance. |
| */ |
| if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) || |
| (id_gpio && info->hpdet_res[2] > 10)) { |
| dev_dbg(arizona->dev, "Detected mic\n"); |
| info->mic = true; |
| info->detecting = true; |
| } else { |
| dev_dbg(arizona->dev, "Detected headphone\n"); |
| } |
| |
| /* Make sure everything is reset back to the real polarity */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC, |
| info->micd_modes[0].src); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t arizona_hpdet_irq(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| int id_gpio = arizona->pdata.hpdet_id_gpio; |
| int report = ARIZONA_CABLE_HEADPHONE; |
| unsigned int val; |
| int ret, reading; |
| |
| mutex_lock(&info->lock); |
| |
| /* If we got a spurious IRQ for some reason then ignore it */ |
| if (!info->hpdet_active) { |
| dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); |
| mutex_unlock(&info->lock); |
| return IRQ_NONE; |
| } |
| |
| /* If the cable was removed while measuring ignore the result */ |
| ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); |
| if (ret < 0) { |
| dev_err(arizona->dev, "Failed to check cable state: %d\n", |
| ret); |
| goto out; |
| } else if (!ret) { |
| dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); |
| goto done; |
| } |
| |
| ret = arizona_hpdet_read(info); |
| if (ret == -EAGAIN) { |
| goto out; |
| } else if (ret < 0) { |
| goto done; |
| } |
| reading = ret; |
| |
| /* Reset back to starting range */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, |
| 0); |
| |
| ret = arizona_hpdet_do_id(info, &reading); |
| if (ret == -EAGAIN) { |
| goto out; |
| } else if (ret < 0) { |
| goto done; |
| } |
| |
| /* Report high impedence cables as line outputs */ |
| if (reading >= 5000) |
| report = ARIZONA_CABLE_LINEOUT; |
| else |
| report = ARIZONA_CABLE_HEADPHONE; |
| |
| ret = extcon_set_cable_state_(&info->edev, report, true); |
| if (ret != 0) |
| dev_err(arizona->dev, "Failed to report HP/line: %d\n", |
| ret); |
| |
| mutex_lock(&arizona->dapm->card->dapm_mutex); |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read output enables: %d\n", |
| ret); |
| val = 0; |
| } |
| |
| if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) { |
| ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to undo magic: %d\n", |
| ret); |
| |
| ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to undo magic: %d\n", |
| ret); |
| } |
| |
| mutex_unlock(&arizona->dapm->card->dapm_mutex); |
| |
| done: |
| if (id_gpio) |
| gpio_set_value_cansleep(id_gpio, 0); |
| |
| /* Revert back to MICDET mode */ |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| /* If we have a mic then reenable MICDET */ |
| if (info->mic) |
| arizona_start_mic(info); |
| |
| if (info->hpdet_active) { |
| pm_runtime_put_autosuspend(info->dev); |
| info->hpdet_active = false; |
| } |
| |
| info->hpdet_done = true; |
| |
| out: |
| mutex_unlock(&info->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void arizona_identify_headphone(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| int ret; |
| |
| if (info->hpdet_done) |
| return; |
| |
| dev_dbg(arizona->dev, "Starting HPDET\n"); |
| |
| /* Make sure we keep the device enabled during the measurement */ |
| pm_runtime_get(info->dev); |
| |
| info->hpdet_active = true; |
| |
| if (info->mic) |
| arizona_stop_mic(info); |
| |
| ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); |
| |
| ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); |
| |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, |
| ARIZONA_ACCDET_MODE_HPL); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); |
| goto err; |
| } |
| |
| ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", |
| ret); |
| goto err; |
| } |
| |
| return; |
| |
| err: |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| /* Just report headphone */ |
| ret = extcon_update_state(&info->edev, |
| 1 << ARIZONA_CABLE_HEADPHONE, |
| 1 << ARIZONA_CABLE_HEADPHONE); |
| if (ret != 0) |
| dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); |
| |
| if (info->mic) |
| arizona_start_mic(info); |
| |
| info->hpdet_active = false; |
| } |
| |
| static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| unsigned int val; |
| int ret; |
| |
| dev_dbg(arizona->dev, "Starting identification via HPDET\n"); |
| |
| /* Make sure we keep the device enabled during the measurement */ |
| pm_runtime_get_sync(info->dev); |
| |
| info->hpdet_active = true; |
| |
| arizona_extcon_pulse_micbias(info); |
| |
| mutex_lock(&arizona->dapm->card->dapm_mutex); |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read output enables: %d\n", |
| ret); |
| val = 0; |
| } |
| |
| if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) { |
| ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, |
| 0x4000); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to do magic: %d\n", |
| ret); |
| |
| ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, |
| 0x4000); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to do magic: %d\n", |
| ret); |
| } |
| |
| mutex_unlock(&arizona->dapm->card->dapm_mutex); |
| |
| ret = regmap_update_bits(arizona->regmap, |
| ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, |
| info->micd_modes[0].src | |
| ARIZONA_ACCDET_MODE_HPL); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); |
| goto err; |
| } |
| |
| ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, |
| ARIZONA_HP_POLL, ARIZONA_HP_POLL); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", |
| ret); |
| goto err; |
| } |
| |
| return; |
| |
| err: |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); |
| |
| /* Just report headphone */ |
| ret = extcon_update_state(&info->edev, |
| 1 << ARIZONA_CABLE_HEADPHONE, |
| 1 << ARIZONA_CABLE_HEADPHONE); |
| if (ret != 0) |
| dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); |
| |
| info->hpdet_active = false; |
| } |
| |
| static irqreturn_t arizona_micdet(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| unsigned int val, lvl; |
| int ret, i; |
| |
| mutex_lock(&info->lock); |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret); |
| mutex_unlock(&info->lock); |
| return IRQ_NONE; |
| } |
| |
| dev_dbg(arizona->dev, "MICDET: %x\n", val); |
| |
| if (!(val & ARIZONA_MICD_VALID)) { |
| dev_warn(arizona->dev, "Microphone detection state invalid\n"); |
| mutex_unlock(&info->lock); |
| return IRQ_NONE; |
| } |
| |
| /* Due to jack detect this should never happen */ |
| if (!(val & ARIZONA_MICD_STS)) { |
| dev_warn(arizona->dev, "Detected open circuit\n"); |
| info->detecting = false; |
| goto handled; |
| } |
| |
| /* If we got a high impedence we should have a headset, report it. */ |
| if (info->detecting && (val & 0x400)) { |
| arizona_identify_headphone(info); |
| |
| ret = extcon_update_state(&info->edev, |
| 1 << ARIZONA_CABLE_MICROPHONE, |
| 1 << ARIZONA_CABLE_MICROPHONE); |
| |
| if (ret != 0) |
| dev_err(arizona->dev, "Headset report failed: %d\n", |
| ret); |
| |
| /* Don't need to regulate for button detection */ |
| ret = regulator_allow_bypass(info->micvdd, false); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", |
| ret); |
| } |
| |
| info->mic = true; |
| info->detecting = false; |
| goto handled; |
| } |
| |
| /* If we detected a lower impedence during initial startup |
| * then we probably have the wrong polarity, flip it. Don't |
| * do this for the lowest impedences to speed up detection of |
| * plain headphones. If both polarities report a low |
| * impedence then give up and report headphones. |
| */ |
| if (info->detecting && (val & 0x3f8)) { |
| if (info->jack_flips >= info->micd_num_modes) { |
| dev_dbg(arizona->dev, "Detected HP/line\n"); |
| arizona_identify_headphone(info); |
| |
| info->detecting = false; |
| |
| arizona_stop_mic(info); |
| } else { |
| info->micd_mode++; |
| if (info->micd_mode == info->micd_num_modes) |
| info->micd_mode = 0; |
| arizona_extcon_set_mode(info, info->micd_mode); |
| |
| info->jack_flips++; |
| } |
| |
| goto handled; |
| } |
| |
| /* |
| * If we're still detecting and we detect a short then we've |
| * got a headphone. Otherwise it's a button press. |
| */ |
| if (val & 0x3fc) { |
| if (info->mic) { |
| dev_dbg(arizona->dev, "Mic button detected\n"); |
| |
| lvl = val & ARIZONA_MICD_LVL_MASK; |
| lvl >>= ARIZONA_MICD_LVL_SHIFT; |
| |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| if (lvl & arizona_lvl_to_key[i].status) |
| input_report_key(info->input, |
| arizona_lvl_to_key[i].report, |
| 1); |
| input_sync(info->input); |
| |
| } else if (info->detecting) { |
| dev_dbg(arizona->dev, "Headphone detected\n"); |
| info->detecting = false; |
| arizona_stop_mic(info); |
| |
| arizona_identify_headphone(info); |
| } else { |
| dev_warn(arizona->dev, "Button with no mic: %x\n", |
| val); |
| } |
| } else { |
| dev_dbg(arizona->dev, "Mic button released\n"); |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| input_report_key(info->input, |
| arizona_lvl_to_key[i].report, 0); |
| input_sync(info->input); |
| arizona_extcon_pulse_micbias(info); |
| } |
| |
| handled: |
| pm_runtime_mark_last_busy(info->dev); |
| mutex_unlock(&info->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void arizona_hpdet_work(struct work_struct *work) |
| { |
| struct arizona_extcon_info *info = container_of(work, |
| struct arizona_extcon_info, |
| hpdet_work.work); |
| |
| mutex_lock(&info->lock); |
| arizona_start_hpdet_acc_id(info); |
| mutex_unlock(&info->lock); |
| } |
| |
| static irqreturn_t arizona_jackdet(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| unsigned int val, present, mask; |
| int ret, i; |
| |
| pm_runtime_get_sync(info->dev); |
| |
| cancel_delayed_work_sync(&info->hpdet_work); |
| |
| mutex_lock(&info->lock); |
| |
| if (arizona->pdata.jd_gpio5) { |
| mask = ARIZONA_MICD_CLAMP_STS; |
| present = 0; |
| } else { |
| mask = ARIZONA_JD1_STS; |
| present = ARIZONA_JD1_STS; |
| } |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read jackdet status: %d\n", |
| ret); |
| mutex_unlock(&info->lock); |
| pm_runtime_put_autosuspend(info->dev); |
| return IRQ_NONE; |
| } |
| |
| if ((val & mask) == present) { |
| dev_dbg(arizona->dev, "Detected jack\n"); |
| ret = extcon_set_cable_state_(&info->edev, |
| ARIZONA_CABLE_MECHANICAL, true); |
| |
| if (ret != 0) |
| dev_err(arizona->dev, "Mechanical report failed: %d\n", |
| ret); |
| |
| if (!arizona->pdata.hpdet_acc_id) { |
| info->detecting = true; |
| info->mic = false; |
| info->jack_flips = 0; |
| |
| arizona_start_mic(info); |
| } else { |
| schedule_delayed_work(&info->hpdet_work, |
| msecs_to_jiffies(250)); |
| } |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0); |
| } else { |
| dev_dbg(arizona->dev, "Detected jack removal\n"); |
| |
| arizona_stop_mic(info); |
| |
| info->num_hpdet_res = 0; |
| for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) |
| info->hpdet_res[i] = 0; |
| info->mic = false; |
| info->hpdet_done = false; |
| |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| input_report_key(info->input, |
| arizona_lvl_to_key[i].report, 0); |
| input_sync(info->input); |
| |
| ret = extcon_update_state(&info->edev, 0xffffffff, 0); |
| if (ret != 0) |
| dev_err(arizona->dev, "Removal report failed: %d\n", |
| ret); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, |
| ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); |
| } |
| |
| /* Clear trig_sts to make sure DCVDD is not forced up */ |
| regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, |
| ARIZONA_MICD_CLAMP_FALL_TRIG_STS | |
| ARIZONA_MICD_CLAMP_RISE_TRIG_STS | |
| ARIZONA_JD1_FALL_TRIG_STS | |
| ARIZONA_JD1_RISE_TRIG_STS); |
| |
| mutex_unlock(&info->lock); |
| |
| pm_runtime_mark_last_busy(info->dev); |
| pm_runtime_put_autosuspend(info->dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int arizona_extcon_probe(struct platform_device *pdev) |
| { |
| struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); |
| struct arizona_pdata *pdata; |
| struct arizona_extcon_info *info; |
| int jack_irq_fall, jack_irq_rise; |
| int ret, mode, i; |
| |
| if (!arizona->dapm || !arizona->dapm->card) |
| return -EPROBE_DEFER; |
| |
| pdata = dev_get_platdata(arizona->dev); |
| |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) { |
| dev_err(&pdev->dev, "Failed to allocate memory\n"); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| info->micvdd = devm_regulator_get(arizona->dev, "MICVDD"); |
| if (IS_ERR(info->micvdd)) { |
| ret = PTR_ERR(info->micvdd); |
| dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); |
| goto err; |
| } |
| |
| mutex_init(&info->lock); |
| info->arizona = arizona; |
| info->dev = &pdev->dev; |
| INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); |
| platform_set_drvdata(pdev, info); |
| |
| switch (arizona->type) { |
| case WM5102: |
| switch (arizona->rev) { |
| case 0: |
| info->micd_reva = true; |
| break; |
| default: |
| info->micd_clamp = true; |
| info->hpdet_ip = 1; |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| info->edev.name = "Headset Jack"; |
| info->edev.supported_cable = arizona_cable; |
| |
| ret = extcon_dev_register(&info->edev, arizona->dev); |
| if (ret < 0) { |
| dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", |
| ret); |
| goto err; |
| } |
| |
| if (pdata->num_micd_configs) { |
| info->micd_modes = pdata->micd_configs; |
| info->micd_num_modes = pdata->num_micd_configs; |
| } else { |
| info->micd_modes = micd_default_modes; |
| info->micd_num_modes = ARRAY_SIZE(micd_default_modes); |
| } |
| |
| if (arizona->pdata.micd_pol_gpio > 0) { |
| if (info->micd_modes[0].gpio) |
| mode = GPIOF_OUT_INIT_HIGH; |
| else |
| mode = GPIOF_OUT_INIT_LOW; |
| |
| ret = devm_gpio_request_one(&pdev->dev, |
| arizona->pdata.micd_pol_gpio, |
| mode, |
| "MICD polarity"); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", |
| arizona->pdata.micd_pol_gpio, ret); |
| goto err_register; |
| } |
| } |
| |
| if (arizona->pdata.hpdet_id_gpio > 0) { |
| ret = devm_gpio_request_one(&pdev->dev, |
| arizona->pdata.hpdet_id_gpio, |
| GPIOF_OUT_INIT_LOW, |
| "HPDET"); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", |
| arizona->pdata.hpdet_id_gpio, ret); |
| goto err_register; |
| } |
| } |
| |
| if (arizona->pdata.micd_bias_start_time) |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_BIAS_STARTTIME_MASK, |
| arizona->pdata.micd_bias_start_time |
| << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); |
| |
| if (arizona->pdata.micd_rate) |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_RATE_MASK, |
| arizona->pdata.micd_rate |
| << ARIZONA_MICD_RATE_SHIFT); |
| |
| if (arizona->pdata.micd_dbtime) |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_DBTIME_MASK, |
| arizona->pdata.micd_dbtime |
| << ARIZONA_MICD_DBTIME_SHIFT); |
| |
| /* |
| * If we have a clamp use it, activating in conjunction with |
| * GPIO5 if that is connected for jack detect operation. |
| */ |
| if (info->micd_clamp) { |
| if (arizona->pdata.jd_gpio5) { |
| /* Put the GPIO into input mode */ |
| regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, |
| 0xc101); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_MICD_CLAMP_CONTROL, |
| ARIZONA_MICD_CLAMP_MODE_MASK, 0x9); |
| } else { |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_MICD_CLAMP_CONTROL, |
| ARIZONA_MICD_CLAMP_MODE_MASK, 0x4); |
| } |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_MICD_CLAMP_DB, |
| ARIZONA_MICD_CLAMP_DB); |
| } |
| |
| arizona_extcon_set_mode(info, 0); |
| |
| info->input = devm_input_allocate_device(&pdev->dev); |
| if (!info->input) { |
| dev_err(arizona->dev, "Can't allocate input dev\n"); |
| ret = -ENOMEM; |
| goto err_register; |
| } |
| |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| input_set_capability(info->input, EV_KEY, |
| arizona_lvl_to_key[i].report); |
| info->input->name = "Headset"; |
| info->input->phys = "arizona/extcon"; |
| info->input->dev.parent = &pdev->dev; |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_idle(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| if (arizona->pdata.jd_gpio5) { |
| jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; |
| jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; |
| } else { |
| jack_irq_rise = ARIZONA_IRQ_JD_RISE; |
| jack_irq_fall = ARIZONA_IRQ_JD_FALL; |
| } |
| |
| ret = arizona_request_irq(arizona, jack_irq_rise, |
| "JACKDET rise", arizona_jackdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", |
| ret); |
| goto err_input; |
| } |
| |
| ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", |
| ret); |
| goto err_rise; |
| } |
| |
| ret = arizona_request_irq(arizona, jack_irq_fall, |
| "JACKDET fall", arizona_jackdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); |
| goto err_rise_wake; |
| } |
| |
| ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", |
| ret); |
| goto err_fall; |
| } |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, |
| "MICDET", arizona_micdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); |
| goto err_fall_wake; |
| } |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, |
| "HPDET", arizona_hpdet_irq, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); |
| goto err_micdet; |
| } |
| |
| arizona_clk32k_enable(arizona); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_JD1_DB, ARIZONA_JD1_DB); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, |
| ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); |
| |
| ret = regulator_allow_bypass(info->micvdd, true); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", |
| ret); |
| |
| pm_runtime_put(&pdev->dev); |
| |
| ret = input_register_device(info->input); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register input device: %d\n", ret); |
| goto err_hpdet; |
| } |
| |
| return 0; |
| |
| err_hpdet: |
| arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); |
| err_micdet: |
| arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); |
| err_fall_wake: |
| arizona_set_irq_wake(arizona, jack_irq_fall, 0); |
| err_fall: |
| arizona_free_irq(arizona, jack_irq_fall, info); |
| err_rise_wake: |
| arizona_set_irq_wake(arizona, jack_irq_rise, 0); |
| err_rise: |
| arizona_free_irq(arizona, jack_irq_rise, info); |
| err_input: |
| err_register: |
| pm_runtime_disable(&pdev->dev); |
| extcon_dev_unregister(&info->edev); |
| err: |
| return ret; |
| } |
| |
| static int arizona_extcon_remove(struct platform_device *pdev) |
| { |
| struct arizona_extcon_info *info = platform_get_drvdata(pdev); |
| struct arizona *arizona = info->arizona; |
| int jack_irq_rise, jack_irq_fall; |
| |
| pm_runtime_disable(&pdev->dev); |
| |
| regmap_update_bits(arizona->regmap, |
| ARIZONA_MICD_CLAMP_CONTROL, |
| ARIZONA_MICD_CLAMP_MODE_MASK, 0); |
| |
| if (arizona->pdata.jd_gpio5) { |
| jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; |
| jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; |
| } else { |
| jack_irq_rise = ARIZONA_IRQ_JD_RISE; |
| jack_irq_fall = ARIZONA_IRQ_JD_FALL; |
| } |
| |
| arizona_set_irq_wake(arizona, jack_irq_rise, 0); |
| arizona_set_irq_wake(arizona, jack_irq_fall, 0); |
| arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); |
| arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); |
| arizona_free_irq(arizona, jack_irq_rise, info); |
| arizona_free_irq(arizona, jack_irq_fall, info); |
| cancel_delayed_work_sync(&info->hpdet_work); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, |
| ARIZONA_JD1_ENA, 0); |
| arizona_clk32k_disable(arizona); |
| extcon_dev_unregister(&info->edev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver arizona_extcon_driver = { |
| .driver = { |
| .name = "arizona-extcon", |
| .owner = THIS_MODULE, |
| }, |
| .probe = arizona_extcon_probe, |
| .remove = arizona_extcon_remove, |
| }; |
| |
| module_platform_driver(arizona_extcon_driver); |
| |
| MODULE_DESCRIPTION("Arizona Extcon driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:extcon-arizona"); |