| /* |
| * drivers/rtc/rtc-spear.c |
| * |
| * Copyright (C) 2010 ST Microelectronics |
| * Rajeev Kumar<rajeev-dlh.kumar@st.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/bcd.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/rtc.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| |
| /* RTC registers */ |
| #define TIME_REG 0x00 |
| #define DATE_REG 0x04 |
| #define ALARM_TIME_REG 0x08 |
| #define ALARM_DATE_REG 0x0C |
| #define CTRL_REG 0x10 |
| #define STATUS_REG 0x14 |
| |
| /* TIME_REG & ALARM_TIME_REG */ |
| #define SECONDS_UNITS (0xf<<0) /* seconds units position */ |
| #define SECONDS_TENS (0x7<<4) /* seconds tens position */ |
| #define MINUTES_UNITS (0xf<<8) /* minutes units position */ |
| #define MINUTES_TENS (0x7<<12) /* minutes tens position */ |
| #define HOURS_UNITS (0xf<<16) /* hours units position */ |
| #define HOURS_TENS (0x3<<20) /* hours tens position */ |
| |
| /* DATE_REG & ALARM_DATE_REG */ |
| #define DAYS_UNITS (0xf<<0) /* days units position */ |
| #define DAYS_TENS (0x3<<4) /* days tens position */ |
| #define MONTHS_UNITS (0xf<<8) /* months units position */ |
| #define MONTHS_TENS (0x1<<12) /* months tens position */ |
| #define YEARS_UNITS (0xf<<16) /* years units position */ |
| #define YEARS_TENS (0xf<<20) /* years tens position */ |
| #define YEARS_HUNDREDS (0xf<<24) /* years hundereds position */ |
| #define YEARS_MILLENIUMS (0xf<<28) /* years millenium position */ |
| |
| /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/ |
| #define SECOND_SHIFT 0x00 /* seconds units */ |
| #define MINUTE_SHIFT 0x08 /* minutes units position */ |
| #define HOUR_SHIFT 0x10 /* hours units position */ |
| #define MDAY_SHIFT 0x00 /* Month day shift */ |
| #define MONTH_SHIFT 0x08 /* Month shift */ |
| #define YEAR_SHIFT 0x10 /* Year shift */ |
| |
| #define SECOND_MASK 0x7F |
| #define MIN_MASK 0x7F |
| #define HOUR_MASK 0x3F |
| #define DAY_MASK 0x3F |
| #define MONTH_MASK 0x7F |
| #define YEAR_MASK 0xFFFF |
| |
| /* date reg equal to time reg, for debug only */ |
| #define TIME_BYP (1<<9) |
| #define INT_ENABLE (1<<31) /* interrupt enable */ |
| |
| /* STATUS_REG */ |
| #define CLK_UNCONNECTED (1<<0) |
| #define PEND_WR_TIME (1<<2) |
| #define PEND_WR_DATE (1<<3) |
| #define LOST_WR_TIME (1<<4) |
| #define LOST_WR_DATE (1<<5) |
| #define RTC_INT_MASK (1<<31) |
| #define STATUS_BUSY (PEND_WR_TIME | PEND_WR_DATE) |
| #define STATUS_FAIL (LOST_WR_TIME | LOST_WR_DATE) |
| |
| struct spear_rtc_config { |
| struct rtc_device *rtc; |
| struct clk *clk; |
| spinlock_t lock; |
| void __iomem *ioaddr; |
| unsigned int irq_wake; |
| }; |
| |
| static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config) |
| { |
| unsigned int val; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&config->lock, flags); |
| val = readl(config->ioaddr + STATUS_REG); |
| val |= RTC_INT_MASK; |
| writel(val, config->ioaddr + STATUS_REG); |
| spin_unlock_irqrestore(&config->lock, flags); |
| } |
| |
| static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config) |
| { |
| unsigned int val; |
| |
| val = readl(config->ioaddr + CTRL_REG); |
| if (!(val & INT_ENABLE)) { |
| spear_rtc_clear_interrupt(config); |
| val |= INT_ENABLE; |
| writel(val, config->ioaddr + CTRL_REG); |
| } |
| } |
| |
| static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config) |
| { |
| unsigned int val; |
| |
| val = readl(config->ioaddr + CTRL_REG); |
| if (val & INT_ENABLE) { |
| val &= ~INT_ENABLE; |
| writel(val, config->ioaddr + CTRL_REG); |
| } |
| } |
| |
| static inline int is_write_complete(struct spear_rtc_config *config) |
| { |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&config->lock, flags); |
| if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL) |
| ret = -EIO; |
| spin_unlock_irqrestore(&config->lock, flags); |
| |
| return ret; |
| } |
| |
| static void rtc_wait_not_busy(struct spear_rtc_config *config) |
| { |
| int status, count = 0; |
| unsigned long flags; |
| |
| /* Assuming BUSY may stay active for 80 msec) */ |
| for (count = 0; count < 80; count++) { |
| spin_lock_irqsave(&config->lock, flags); |
| status = readl(config->ioaddr + STATUS_REG); |
| spin_unlock_irqrestore(&config->lock, flags); |
| if ((status & STATUS_BUSY) == 0) |
| break; |
| /* check status busy, after each msec */ |
| msleep(1); |
| } |
| } |
| |
| static irqreturn_t spear_rtc_irq(int irq, void *dev_id) |
| { |
| struct spear_rtc_config *config = dev_id; |
| unsigned long flags, events = 0; |
| unsigned int irq_data; |
| |
| spin_lock_irqsave(&config->lock, flags); |
| irq_data = readl(config->ioaddr + STATUS_REG); |
| spin_unlock_irqrestore(&config->lock, flags); |
| |
| if ((irq_data & RTC_INT_MASK)) { |
| spear_rtc_clear_interrupt(config); |
| events = RTC_IRQF | RTC_AF; |
| rtc_update_irq(config->rtc, 1, events); |
| return IRQ_HANDLED; |
| } else |
| return IRQ_NONE; |
| |
| } |
| |
| static int tm2bcd(struct rtc_time *tm) |
| { |
| if (rtc_valid_tm(tm) != 0) |
| return -EINVAL; |
| tm->tm_sec = bin2bcd(tm->tm_sec); |
| tm->tm_min = bin2bcd(tm->tm_min); |
| tm->tm_hour = bin2bcd(tm->tm_hour); |
| tm->tm_mday = bin2bcd(tm->tm_mday); |
| tm->tm_mon = bin2bcd(tm->tm_mon + 1); |
| tm->tm_year = bin2bcd(tm->tm_year); |
| |
| return 0; |
| } |
| |
| static void bcd2tm(struct rtc_time *tm) |
| { |
| tm->tm_sec = bcd2bin(tm->tm_sec); |
| tm->tm_min = bcd2bin(tm->tm_min); |
| tm->tm_hour = bcd2bin(tm->tm_hour); |
| tm->tm_mday = bcd2bin(tm->tm_mday); |
| tm->tm_mon = bcd2bin(tm->tm_mon) - 1; |
| /* epoch == 1900 */ |
| tm->tm_year = bcd2bin(tm->tm_year); |
| } |
| |
| /* |
| * spear_rtc_read_time - set the time |
| * @dev: rtc device in use |
| * @tm: holds date and time |
| * |
| * This function read time and date. On success it will return 0 |
| * otherwise -ve error is returned. |
| */ |
| static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct spear_rtc_config *config = dev_get_drvdata(dev); |
| unsigned int time, date; |
| |
| /* we don't report wday/yday/isdst ... */ |
| rtc_wait_not_busy(config); |
| |
| time = readl(config->ioaddr + TIME_REG); |
| date = readl(config->ioaddr + DATE_REG); |
| tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; |
| tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; |
| tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; |
| tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; |
| tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; |
| tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; |
| |
| bcd2tm(tm); |
| return 0; |
| } |
| |
| /* |
| * spear_rtc_set_time - set the time |
| * @dev: rtc device in use |
| * @tm: holds date and time |
| * |
| * This function set time and date. On success it will return 0 |
| * otherwise -ve error is returned. |
| */ |
| static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct spear_rtc_config *config = dev_get_drvdata(dev); |
| unsigned int time, date, err = 0; |
| |
| if (tm2bcd(tm) < 0) |
| return -EINVAL; |
| |
| rtc_wait_not_busy(config); |
| time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) | |
| (tm->tm_hour << HOUR_SHIFT); |
| date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) | |
| (tm->tm_year << YEAR_SHIFT); |
| writel(time, config->ioaddr + TIME_REG); |
| writel(date, config->ioaddr + DATE_REG); |
| err = is_write_complete(config); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /* |
| * spear_rtc_read_alarm - read the alarm time |
| * @dev: rtc device in use |
| * @alm: holds alarm date and time |
| * |
| * This function read alarm time and date. On success it will return 0 |
| * otherwise -ve error is returned. |
| */ |
| static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| struct spear_rtc_config *config = dev_get_drvdata(dev); |
| unsigned int time, date; |
| |
| rtc_wait_not_busy(config); |
| |
| time = readl(config->ioaddr + ALARM_TIME_REG); |
| date = readl(config->ioaddr + ALARM_DATE_REG); |
| alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; |
| alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; |
| alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; |
| alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; |
| alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; |
| alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; |
| |
| bcd2tm(&alm->time); |
| alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE; |
| |
| return 0; |
| } |
| |
| /* |
| * spear_rtc_set_alarm - set the alarm time |
| * @dev: rtc device in use |
| * @alm: holds alarm date and time |
| * |
| * This function set alarm time and date. On success it will return 0 |
| * otherwise -ve error is returned. |
| */ |
| static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| struct spear_rtc_config *config = dev_get_drvdata(dev); |
| unsigned int time, date, err = 0; |
| |
| if (tm2bcd(&alm->time) < 0) |
| return -EINVAL; |
| |
| rtc_wait_not_busy(config); |
| |
| time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min << |
| MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT); |
| date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon << |
| MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT); |
| |
| writel(time, config->ioaddr + ALARM_TIME_REG); |
| writel(date, config->ioaddr + ALARM_DATE_REG); |
| err = is_write_complete(config); |
| if (err < 0) |
| return err; |
| |
| if (alm->enabled) |
| spear_rtc_enable_interrupt(config); |
| else |
| spear_rtc_disable_interrupt(config); |
| |
| return 0; |
| } |
| |
| static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct spear_rtc_config *config = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| spear_rtc_clear_interrupt(config); |
| |
| switch (enabled) { |
| case 0: |
| /* alarm off */ |
| spear_rtc_disable_interrupt(config); |
| break; |
| case 1: |
| /* alarm on */ |
| spear_rtc_enable_interrupt(config); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static struct rtc_class_ops spear_rtc_ops = { |
| .read_time = spear_rtc_read_time, |
| .set_time = spear_rtc_set_time, |
| .read_alarm = spear_rtc_read_alarm, |
| .set_alarm = spear_rtc_set_alarm, |
| .alarm_irq_enable = spear_alarm_irq_enable, |
| }; |
| |
| static int __devinit spear_rtc_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct spear_rtc_config *config; |
| unsigned int status = 0; |
| int irq; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "no resource defined\n"); |
| return -EBUSY; |
| } |
| if (!request_mem_region(res->start, resource_size(res), pdev->name)) { |
| dev_err(&pdev->dev, "rtc region already claimed\n"); |
| return -EBUSY; |
| } |
| |
| config = kzalloc(sizeof(*config), GFP_KERNEL); |
| if (!config) { |
| dev_err(&pdev->dev, "out of memory\n"); |
| status = -ENOMEM; |
| goto err_release_region; |
| } |
| |
| config->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(config->clk)) { |
| status = PTR_ERR(config->clk); |
| goto err_kfree; |
| } |
| |
| status = clk_enable(config->clk); |
| if (status < 0) |
| goto err_clk_put; |
| |
| config->ioaddr = ioremap(res->start, resource_size(res)); |
| if (!config->ioaddr) { |
| dev_err(&pdev->dev, "ioremap fail\n"); |
| status = -ENOMEM; |
| goto err_disable_clock; |
| } |
| |
| spin_lock_init(&config->lock); |
| platform_set_drvdata(pdev, config); |
| |
| config->rtc = rtc_device_register(pdev->name, &pdev->dev, |
| &spear_rtc_ops, THIS_MODULE); |
| if (IS_ERR(config->rtc)) { |
| dev_err(&pdev->dev, "can't register RTC device, err %ld\n", |
| PTR_ERR(config->rtc)); |
| status = PTR_ERR(config->rtc); |
| goto err_iounmap; |
| } |
| |
| /* alarm irqs */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no update irq?\n"); |
| status = irq; |
| goto err_clear_platdata; |
| } |
| |
| status = request_irq(irq, spear_rtc_irq, 0, pdev->name, config); |
| if (status) { |
| dev_err(&pdev->dev, "Alarm interrupt IRQ%d already \ |
| claimed\n", irq); |
| goto err_clear_platdata; |
| } |
| |
| if (!device_can_wakeup(&pdev->dev)) |
| device_init_wakeup(&pdev->dev, 1); |
| |
| return 0; |
| |
| err_clear_platdata: |
| platform_set_drvdata(pdev, NULL); |
| rtc_device_unregister(config->rtc); |
| err_iounmap: |
| iounmap(config->ioaddr); |
| err_disable_clock: |
| clk_disable(config->clk); |
| err_clk_put: |
| clk_put(config->clk); |
| err_kfree: |
| kfree(config); |
| err_release_region: |
| release_mem_region(res->start, resource_size(res)); |
| |
| return status; |
| } |
| |
| static int __devexit spear_rtc_remove(struct platform_device *pdev) |
| { |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); |
| int irq; |
| struct resource *res; |
| |
| /* leave rtc running, but disable irqs */ |
| spear_rtc_disable_interrupt(config); |
| device_init_wakeup(&pdev->dev, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (irq) |
| free_irq(irq, pdev); |
| clk_disable(config->clk); |
| clk_put(config->clk); |
| iounmap(config->ioaddr); |
| kfree(config); |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res) |
| release_mem_region(res->start, resource_size(res)); |
| platform_set_drvdata(pdev, NULL); |
| rtc_device_unregister(config->rtc); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); |
| int irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (device_may_wakeup(&pdev->dev)) { |
| if (!enable_irq_wake(irq)) |
| config->irq_wake = 1; |
| } else { |
| spear_rtc_disable_interrupt(config); |
| clk_disable(config->clk); |
| } |
| |
| return 0; |
| } |
| |
| static int spear_rtc_resume(struct platform_device *pdev) |
| { |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); |
| int irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| |
| if (device_may_wakeup(&pdev->dev)) { |
| if (config->irq_wake) { |
| disable_irq_wake(irq); |
| config->irq_wake = 0; |
| } |
| } else { |
| clk_enable(config->clk); |
| spear_rtc_enable_interrupt(config); |
| } |
| |
| return 0; |
| } |
| |
| #else |
| #define spear_rtc_suspend NULL |
| #define spear_rtc_resume NULL |
| #endif |
| |
| static void spear_rtc_shutdown(struct platform_device *pdev) |
| { |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); |
| |
| spear_rtc_disable_interrupt(config); |
| clk_disable(config->clk); |
| } |
| |
| static struct platform_driver spear_rtc_driver = { |
| .probe = spear_rtc_probe, |
| .remove = __devexit_p(spear_rtc_remove), |
| .suspend = spear_rtc_suspend, |
| .resume = spear_rtc_resume, |
| .shutdown = spear_rtc_shutdown, |
| .driver = { |
| .name = "rtc-spear", |
| }, |
| }; |
| |
| module_platform_driver(spear_rtc_driver); |
| |
| MODULE_ALIAS("platform:rtc-spear"); |
| MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>"); |
| MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)"); |
| MODULE_LICENSE("GPL"); |