| /* |
| * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan |
| * |
| * 2003 by T.Adachi <tadachi@tadachi-net.com> |
| * 2003 by Takeru KOMORIYA <komoriya@paken.org> |
| * 2006 by Hans Verkuil <hverkuil@xs4all.nl> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-common.h> |
| #include <media/upd64031a.h> |
| |
| // --------------------- read registers functions define ----------------------- |
| |
| /* bit masks */ |
| #define GR_MODE_MASK 0xc0 |
| #define DIRECT_3DYCS_CONNECT_MASK 0xc0 |
| #define SYNC_CIRCUIT_MASK 0xa0 |
| |
| // ----------------------------------------------------------------------------- |
| |
| MODULE_DESCRIPTION("uPD64031A driver"); |
| MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); |
| MODULE_LICENSE("GPL"); |
| |
| static int debug = 0; |
| module_param(debug, int, 0644); |
| |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
| |
| static unsigned short normal_i2c[] = { 0x24 >> 1, 0x26 >> 1, I2C_CLIENT_END }; |
| |
| |
| I2C_CLIENT_INSMOD; |
| |
| enum { |
| R00 = 0, R01, R02, R03, R04, |
| R05, R06, R07, R08, R09, |
| R0A, R0B, R0C, R0D, R0E, R0F, |
| /* unused registers |
| R10, R11, R12, R13, R14, |
| R15, R16, R17, |
| */ |
| TOT_REGS |
| }; |
| |
| struct upd64031a_state { |
| u8 regs[TOT_REGS]; |
| u8 gr_mode; |
| u8 direct_3dycs_connect; |
| u8 ext_comp_sync; |
| u8 ext_vert_sync; |
| }; |
| |
| static u8 upd64031a_init[] = { |
| 0x00, 0xb8, 0x48, 0xd2, 0xe6, |
| 0x03, 0x10, 0x0b, 0xaf, 0x7f, |
| 0x00, 0x00, 0x1d, 0x5e, 0x00, |
| 0xd0 |
| }; |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| static u8 upd64031a_read(struct i2c_client *client, u8 reg) |
| { |
| u8 buf[2]; |
| |
| if (reg >= sizeof(buf)) |
| return 0xff; |
| i2c_master_recv(client, buf, 2); |
| return buf[reg]; |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val) |
| { |
| u8 buf[2]; |
| |
| buf[0] = reg; |
| buf[1] = val; |
| v4l_dbg(1, debug, client, "writing reg addr: %02X val: %02X\n", reg, val); |
| if (i2c_master_send(client, buf, 2) != 2) |
| v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /* The input changed due to new input or channel changed */ |
| static void upd64031a_change(struct i2c_client *client) |
| { |
| struct upd64031a_state *state = i2c_get_clientdata(client); |
| u8 reg = state->regs[R00]; |
| |
| v4l_dbg(1, debug, client, "changed input or channel\n"); |
| upd64031a_write(client, R00, reg | 0x10); |
| upd64031a_write(client, R00, reg & ~0x10); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void *arg) |
| { |
| struct upd64031a_state *state = i2c_get_clientdata(client); |
| struct v4l2_routing *route = arg; |
| |
| switch (cmd) { |
| case VIDIOC_S_FREQUENCY: |
| upd64031a_change(client); |
| break; |
| |
| case VIDIOC_INT_G_VIDEO_ROUTING: |
| route->input = (state->gr_mode >> 6) | |
| (state->direct_3dycs_connect >> 4) | |
| (state->ext_comp_sync >> 1) | |
| (state->ext_vert_sync >> 2); |
| route->output = 0; |
| break; |
| |
| case VIDIOC_INT_S_VIDEO_ROUTING: |
| { |
| u8 r00, r05, r08; |
| |
| state->gr_mode = (route->input & 3) << 6; |
| state->direct_3dycs_connect = (route->input & 0xc) << 4; |
| state->ext_comp_sync = (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1; |
| state->ext_vert_sync = (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2; |
| r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode; |
| r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) | |
| state->ext_comp_sync | state->ext_vert_sync; |
| r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) | |
| state->direct_3dycs_connect; |
| upd64031a_write(client, R00, r00); |
| upd64031a_write(client, R05, r05); |
| upd64031a_write(client, R08, r08); |
| upd64031a_change(client); |
| break; |
| } |
| |
| case VIDIOC_LOG_STATUS: |
| v4l_info(client, "Status: SA00=0x%02x SA01=0x%02x\n", |
| upd64031a_read(client, 0), upd64031a_read(client, 1)); |
| break; |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| case VIDIOC_INT_G_REGISTER: |
| { |
| struct v4l2_register *reg = arg; |
| |
| if (reg->i2c_id != I2C_DRIVERID_UPD64031A) |
| return -EINVAL; |
| reg->val = upd64031a_read(client, reg->reg & 0xff); |
| break; |
| } |
| |
| case VIDIOC_INT_S_REGISTER: |
| { |
| struct v4l2_register *reg = arg; |
| u8 addr = reg->reg & 0xff; |
| u8 val = reg->val & 0xff; |
| |
| if (reg->i2c_id != I2C_DRIVERID_UPD64031A) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| upd64031a_write(client, addr, val); |
| break; |
| } |
| #endif |
| |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /* i2c implementation */ |
| |
| static struct i2c_driver i2c_driver; |
| |
| static int upd64031a_attach(struct i2c_adapter *adapter, int address, int kind) |
| { |
| struct i2c_client *client; |
| struct upd64031a_state *state; |
| int i; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return 0; |
| |
| client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); |
| if (client == NULL) { |
| return -ENOMEM; |
| } |
| |
| client->addr = address; |
| client->adapter = adapter; |
| client->driver = &i2c_driver; |
| snprintf(client->name, sizeof(client->name) - 1, "uPD64031A"); |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name); |
| |
| state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL); |
| if (state == NULL) { |
| kfree(client); |
| return -ENOMEM; |
| } |
| i2c_set_clientdata(client, state); |
| memcpy(state->regs, upd64031a_init, sizeof(state->regs)); |
| state->gr_mode = UPD64031A_GR_ON << 6; |
| state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4; |
| state->ext_comp_sync = state->ext_vert_sync = 0; |
| for (i = 0; i < TOT_REGS; i++) { |
| upd64031a_write(client, i, state->regs[i]); |
| } |
| |
| i2c_attach_client(client); |
| |
| return 0; |
| } |
| |
| static int upd64031a_probe(struct i2c_adapter *adapter) |
| { |
| if (adapter->class & I2C_CLASS_TV_ANALOG) |
| return i2c_probe(adapter, &addr_data, upd64031a_attach); |
| return 0; |
| } |
| |
| static int upd64031a_detach(struct i2c_client *client) |
| { |
| int err; |
| |
| err = i2c_detach_client(client); |
| if (err) |
| return err; |
| |
| kfree(client); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| /* i2c implementation */ |
| static struct i2c_driver i2c_driver = { |
| .driver = { |
| .name = "upd64031a", |
| }, |
| .id = I2C_DRIVERID_UPD64031A, |
| .attach_adapter = upd64031a_probe, |
| .detach_client = upd64031a_detach, |
| .command = upd64031a_command, |
| }; |
| |
| |
| static int __init upd64031a_init_module(void) |
| { |
| return i2c_add_driver(&i2c_driver); |
| } |
| |
| static void __exit upd64031a_exit_module(void) |
| { |
| i2c_del_driver(&i2c_driver); |
| } |
| |
| module_init(upd64031a_init_module); |
| module_exit(upd64031a_exit_module); |